Center virtual server appliance 5.1 and 5.1 view composer

Similar Questions

• Center Virtual Server Plugins

  Hi all:

  If I download and install the VMware Update Manager V 1.0 and the VMware converter enterprise 1.0 Extension in Virtual Center Server 2.5, do I restart the ESX host or virtual machines? Please see the attached screenshot.

  Thank you.

  Hello

  No you don't have to restart the host ESX, VM or VC

  All what you need to do is, click on the 'Download and install' button for the plug-in, complete the Setup Wizard, and once the plug-in has been installed, go to the tab Installed and check the box to activate the plug-in.

  After that, you can use Update Manager and Converter Enterprise.

  Thank you.

  If you have found this unit or any other answer useful, please consider to allocate points for correct or helpful answers. *

• A suspended snapshot could not be created for the virtual machine (DC) ha-data center (DC) \vm\VMware vCenter Server Appliance.

  Hello gentlemen,

  I can not only save this virtual machine with Backup Exec 2014 for a long time.

  They are there was no snapshot in snapshot Manager.

  Could you help me?

  A suspended snapshot could not be created for the virtual machine (DC) ha-data center (DC) \vm\VMware vCenter Server Appliance.

  V-79-57344-38260 - failed to create a snapshot of the virtual machine. The virtual machine is no longer exist, or may be too busy to pause to take the snap.

  A suspended snapshot could not be created for the virtual machine (DC) ha-data center (DC) \vm\FRPA111PRIM01.

  V-79-57344-38299-\vm\FRPA111PRIM01 ha-data center (DC) VMVCB::\\192.168.204.42\VCGuestVm\ (DC). To try to take a snapshot of a virtual machine failed because it could not be suspended in a file system.

  Hello

  I found the solution.

  I disabled the JOB BE general relativity.

  and the host where the virtual machine belong was not the right time. No Ntp server has been configured.

  I did and now there works.

  I think that the problem can come from this.

• I would take my existing Server 2008 and upgrade to Server 2012 and the purchase of a virtual server in a data center

  Original title:

  Virtualization server 2012

  I got too many answers to this question. I need the correct answer before buying any CALs galore.

  I would take my existing Server 2008 and upgrade to Server 2012 and the purchase of a virtual server in a data center. I have 25 computers that need to communicate with the server throughout the day, all the different machines. I want to know the best option without breaking the Bank. I permit the data center included in the package to my server.

  Try asking in the Windows Server forum:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• After joining the Server Appliance Center virtual domain, you can see domain when you add permissions user

  Hello

  Help, please!

  section of the knowledge base on the particular issue is not the problem.

  Just deployed the vCSA 5.5 and joined to a Windows domain but I do not see the field to add AD groups because in my view, there is a question hour DST GMT.

  My domain controller Windows are running in UTC with Daylight Saving Time (UTC).  IM in the United Kingdom.

  If I connect directly to an ESXI host using the vSphere Client - time is correct and shows "the dates and times of hospitality have been translated into the local time of the vSphere Client.

  
  

  If I run the command on the Console of the vCSA date, time is one hour behind so out of sync with the domain controllers.  If it was winter, probably all work.

  
  

  No idea how to fix this?

  
  

  Thanks in advance.
  

  Can confirm you that you have done the following:

  • Join vCenter Server Appliance to the domain, i.e. the AD object is created in the "Computers" OR
  • Add the AD as an additional Source of identity domain using "Active Directory (Windows integrated authentication)"

  and you can not yet select the domain in the drop-down box when you try to configure permissions?

  André

• Mobile Center Virtual VM to physical server

  Hello

  In fact, I have 2 ESX 3.5 with an ISCSI SAN. I would like to reinstall the virtual server of the centre, with is on a virtual machine today, on a physical server for performance reasons (many alarms in case of large CPU usage for this virtual machine) and practical reasons (updated the firmware of the SAN, I have to stop all the VM, so it will be easier not to have Virtual Center on SAN.)

  I saved 2 databases on the Virtual Center.

  I think that to stop my VM virtual Center. Install VC on my physical server that has a different name . Restore the database on the new server... and that - of all the people... Am I wrong? You see an error in this

  Thank you

  Hello

  VirtualCenter migration to another server

  http://KB.VMware.com/kb/5850444

  http://KB.VMware.com/kb/1003052

  I hope it's useful...

• V.11 ColdFusion Standard can be installed and executed on a Windows virtual server, or must it be installed on a physical server?

  V.11 ColdFusion Standard can be installed and executed on a Windows virtual server, or must it be installed on a physical server?

  It can be installed on physical servers and virtual machines. He political license would be different for the physical server and a virtual machine.

• Open connections of hosts and vCenter Server Appliance

  We have number of ESXi hosts configured in our environment with vCenter 5.1, far ssh is open to all in order to access all hosts via SSH. Although authenticating the users available but, even then, the issue raises so bound / restrict administrators IPs or subnet of the network for security reasons. Will be the same for vCenter Server Appliance.

  Also can we restriction of IP level for the Vmware Client users, good that now everyone can make the connection between vSphere and vCenter cleint. Please advice

  Hi friend

  Please see below the resources needed to achieve the same on ESXi

  http://www.definit.co.UK/2013/10/vSphere-Security-Advanced-SSH-configurations/

  Restrict access to the ESXi host Console - see the lock Mode. VMware vSphere Blog - VMware Blogs

  Limit the vSphere Client access to IP or network - Firewall 5 ESXi & raquo; System administrators

• vCenter Server Appliance and FT

  Can the vCenter Server Appliance reside as a VM in the same cluster FT it manages?

  FT is one per VM configuration and you can certainly run another VM - including vCenter Server - in the same cluster HA.

  André

• Snapshots of vCenter taking all space hard and virtual server crash

  After completing the installation, I created a snapshot of a virtual machine (windows 2008 sbs) and all updates as starting point was what happening whatsoever. Since this snapshot, we have added a passage from the device to the virtual computer for snapshots are no longer created or restored. According to windows sbs, disk space is 200 of 420 concerts in use. When copying on a file of 50 concerts, virtual machine crashed said it doesn't have enough free space. I cleaned a little files and got the virtual computer restarted. I looked in the veiw storage and noticed 2 files, servername - 000001.vmdk and servername-vmdk. I tried to remove the snapshot through the Snapshot Manager, but it does nothing. can I manually remove the snapshot via the display of storage? and if so which file? I ask because if I change the setting of the virtual machine and choose the hard drive, it does reference the name of the server - 000001.vmdk. Thanks for your comments

  > can I manually remove the snapshot via the display of storage? and if so which file?

  NO.

  you will lose data if you manually remove the 000001.vmdk.
  It should consolidate the snapshot using Snapshotmanager.

  You get errors when trying to "remove all" in snapshotmanager?

• ACE Management Server Appliance username and password?

  Hi there, I am trying to ACE Management Server Appliance to work which is provided with VMware downloads once I configured the network using the username 'network' he asks me to connect to host? I tried everything but nothing someone can tell me what is the username and password for this administrator.

  Thanks for your help...

  users are root and network

  the admin user is root

  Jose Ruelas B

  http://aservir.WordPress.com

• VMware Converter 4.0 and Virtual Server 2005 R2 VM

  I downloaded the new VMware Converter (Version 4.0.0) because he had promised for the merger as a target.

  I have the image of Sharepoint 2007 VIrtual demonstration of Microsoft Server which works OK using Virtual Server.

  The converter seems to be a valid VMware image on the PC where I run the converter.

  I copy the VMware HD image created on my external Mac (OS X 10.5.6 Fusion 2.0.1) and merge it opens but there are questions.

  1 fusion think that the virtual machine is an 'other' OS rather than Microsoft Server 2003 Enterprise, which is what the VM from virtual server. Therefore, I can not install VMware tools on the virtual computer.

  2. If I change the type of operating system in the interface of Fusion Server 2003 Enterprise settings and that seems ok. Then, I am able to install tools in VMware Fusion.

  3. after the required reboot to complete the installation of the tools, the VM comes back BUT the mouse pointer is no longer visible. The virtual machine makes it unusable at this point.

  I remember posting on this forum awhile at the time where I realized first that the virtual server instance could be opened with a PC version of the workstation and I remember reading while the mouse pointer is a problem.

  So is there anything, I can do to get the Fusion tools installed AND have a working mouse pointer?

  Any help appreciated.

  Jim

  Yes, it is removed from the control panel and you can try on virtual machine converted however, it may not work.  As before you convert you can do anyway that you presented.  I like to make a copy and use it as I want to do some other preprocessing and then I just remove it when I'm done leaving the original intact, but whatever way works for you is fine.

• VMWare vCenter Server Appliance / 2012R2 Windows domain

  Hi all
  I've recently updated my domaincontrollers to R2 2012 WIndows, and I installed vCenter on a vm through the ovf appliance. After you have configured the vCenter in the web gui, I can join the domain successfully and the virtual center appears in the field. After a restart of the virtualcenter, I'm not able to find the field in the client to vcenter under permissions. (version vCenter: VMware-vCenter-Server-Appliance-5.5.0.5101-1398493)

  Someone at - it a tip on how to fix this?

  You must login to webclient using [email protected] and navigate to the SSO configuration. Select your ad that you added and make this default domain. This makes the announcement should appear in the menu drop-down.

• VSA does virtual vCenter Appliance support

  We are setting up a remote site with VSA running on both nodes ESX with a third ESX Server built to manage the instance of vCenter.  We run vCenter device for our main campus and would like to remain consistent, but I read her you need to run on a Windows Server vCenter.  Someone at - it care to confirm or deny?

  VSA is and add-on for vCenter for Windows.

  Some clues:

  • "vsphere Storage Appliance Planning Checklist" (http://pubs.vmware.com/vsphere-50/topic/com.vmware.vsa.doc_10/GUID-2F776546-FAFD-4C07-8588-DD87CCFC186F.html#GUID-2F776546-FAFD-4C07-8588-DD87CCFC186F). It is said to istall vCenter on a virtual or physical machine (vCenter Server Appliance is virtual ony)
  • the "Install vCenter Server for VSA ' (http://pubs.vmware.com/vsphere-50/topic/com.vmware.vsa.doc_10/GUID-045C6534-66AA-4034-BC53-59F2FE40A1AC.html) vCenter Server requires Microsoft .NET 3.5 SP1 Framework. (so Windows)
  • "Yellow brick - vCenter device" (http://www.yellow-bricks.com/2011/08/10/vcenter-appliance/)

  My 2 cents

  Sam

• P2V - System Center Virtual Machine Manager 2008 R2

  I am running Microsoft System Center Virtual Machine Manager 2008 R2 on a Windows Server 2008 R2 with SP1 enviornment.

  I am creating a P2V Conversion in the P2V Assistant and 'Conversion of information' section, I get the following error message:

  Error (3210):

  And\pr boot volume system \\?\Volume{2dbb99c1-ba73-11de-97ae-806e6f6e6963}\ was not selected or is not found on the

  source machine >.

  Recommended action:

  Selected machine > cannot be virtualized. Verify that the system volumes and boot are selected for migration. So try

  try the operation again.

  Environmental information:

  Source server:

  • Windows Server 2008 R2 with Service Pack 1
  • Roles: Domain Services Active Directory, DNS, DHCP, printing and service of documents, files, & network policy and Access Services
  • Discs: C:\(OS) & D:\(File Share)

  Destination server:

  • Windows Server 2008 R2 with Service Pack 1
  • Roles: Files, Hyper-V services (IIS) Web server
  • Discs: C:\(OS) & D:\(VHD Files)

  Information about the conversion:

  • Configuration of the volume: (selected Volumes-C:------, D:\ & disk: Partition 0: 0)
  • "Offline conversion" because of the following warning: disk hardware or the file system on the volume \\?\Volume{2dbb99c1-ba73-11de-97ae-806e6f6e6963}\: is not supported by Volume Shadow Copy Service.

  I don't know what the problem or prevent this from happening. Assistance in this matter is greatly appreciated. Thank you.

  Hi Christophe,

  According to the description looks like you have a problem with a particular program in Windows server 2008, I suggest you post this question in this forum for further assistance.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  Hope this information helps. If you have questions about Windows do not hesitate to answer and we will be happy to help.