Similar Questions

• View domain for the server connection help please

  OK, I don't know where to put this so I hope it's a good place. I tried to install view connection server on my last windows 2003 server. I built a laboratory at home with a dedicated server for vCenter, AD and view connection. When trying to install view connection Server 4.5 sound telling me:

  "This computer is a member of a domain, but no server connection can be found. Please make sure that this computer is properly connected to a domain and that a domain controller is available before to perform this installation again'

  OK, so I logged on windows Server 2003 view connection using active directory so why it gives me this error?

  Thank you.

  Start by pingging your AD server's DNS server.  Also, try ping the DNS server of the virtual machine that you are trying to install the view on.  You can try it joined to the domain by using the command NET DOM.  We do in our environment at all correct control but can not quite understand our this is the problem.  You can also check the event viewer on the virtual computer to see if he throws all Kerberos events associated with the certificate expiring this testimony of course that the server may need to be joined to the domain.  The virtual machine was interrupted for a while?

  See you soon,.

  Chad King

  VCP-410. Server +.

  Twitter: http://twitter.com/cwjking

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• Help generate the SSL certificate for the Security Server

  Hi people,

  We have server (ss - 01.mydomain.local) security and connection server (cs - 01.mydomain.local). Now intend to install a certificate on the Security server. What should be the common name.

  our Web site is something like access.mydomain.local.

  Also, we plan to install SSL only on security for internet access server, this will affect the internal users, access to the connection to the server.

  Thanks and greetings

  J P Raj

  Take a look at the link below

  https://pubs.VMware.com/horizon-view-60/topic/com.VMware.ICbase/PDF/horizon-view-60-scenarios-SSL-certificates.PDF

  Internal users will not be affected when you install the Security server certificates

  Simply create a CSr file > get certificates and import them to the Security server in the MMC guide explains practically everything. If you already have certificates wildcard certificates, then you can follow the sub process

  (a) export the server certificates

  (1) to connect to the server that has certificates

  (2) for this server to export it to a PFX format certificate.

  (3) open the Microsoft MMC Certificates snap-in for the computer account.

  4) navigate to certificates (Local computer) > personal > certificates.

  (5) right-click on the signed certificate that is to be exported.

  6) click all tasks > export.

  (7) on the Welcome screen, click Next.

  8) click Yes, export the private key.

  (9) if it is an option, click on include all certificates in the certification path.

  (10) enter a password for the private key. This is required for the import certificates.

  (11) to enter a file name and location. For example, C:\certificates\certificate.pfx.

  12) click Next.

  13) click Finish.

  b) import it to the use of broker or planned connection securityr.

  Certificates of thye 1) import (preferable Pfx format) for the server broker or planned connection security.

  (2) open the Microsoft MMC Certificates snap-in for the computer account.

  3) navigate to certificates (Local computer) > personal > certificates.

  (4) right-click the certificates.

  5) click on Import.

  (6) through the pfx and click Next.

  (7) enter the certificate password.

  (8) select Mark keys as being exportable.

  9) click Next.

  10) click Finish.

  (c) restart Consulting Services

  To restart the services:

  Log in as an administrator on the server that is running the Server VMware View connection server VMware View connection or VMware View Server Security.

  Click Start > run, type services.msc and press ENTER.

  In the list of services, right-click on the VMware View connection Server or VMware View Server Security service.

  Click on restart and wait for service to stop and start.

• How can I stop the yellow browser bar to appear? one that says "could not contact the server connection?

  This yellow bar appears constantly while I'm using the internet. It is said"LastPass could not contact the server connection, etc. etc. »

  It is very annoying and causes my screen to jump on when it is active.

  I use windows 7 on a HP desktop computer.

  Or disable LastPass until you contact LastPass support for help.

• Setting the SSL certificate for the web user interface

  How can I configure the SSL certificate for the management of a SG300 interface? I don't seem to find the configuration option in the web gui?

  Hello Dirk,.

  For import / create / modify h99350 ssl please go to ' ' security > SSL server > SSL server authentication settings.

  HTTPS is enabled by default.

  Thank you and best regards,

  Siva

• Setting up Certification Authority (CA) signed certificates for vCenter Server Appliance 6

  Hi all

  Recently, I managed to migrate to vCenter Server Appliance 6. 5.5, there was a large KB (2057223) on Configuring Certificate Authority (CA) signed certificates for vCenter Server Appliance. I tried to do as it says configure the certificate for v6.

  Unfortunately, I understand that some services such as lighttpd are changed in version.

  Can anyone provide a new instruction for the v6?

  Thank you

  Thank you. That helped me to see the idea. However, the explanation in the pages that was not complete. I had to search for more.

  This blog helped me solve my problem with the generated certificate:

  http://longwhiteclouds.com/2015/03/22/vSphere-6-using-Vmca-as-a-subordinate-CA/

• You can install the server connection and security on the same virtual machine Server?

  I was looking around and found an old post that says that you could do.

  I tried the documentation view 5 but not a lot of luck there.

  If the deployment is small say 20 users view total.

  Could install you the connection and security on the same VM Server?   W2K8R2 64-bit?

  I certainly understand some of the security risks.

  TIA

  Marc Alumbaugh says:

  Any other ideas?

  No other ideas, but we have should stick to previous ideas and continue to work through them. You make progress in this analysis - continue! When it is correctly configured, you have configured the firewall/proxy etc don't not to block PCoIP and that you use at least seen 4.6 on the Client and the server, it does not work.

  It always seems that there's something blocking PCoIP in your environment - where the black screen.

  So when 'PCoIP external URL' on the login server is defined on InternalIP:4172, your View on the internal network Client connects fine. If you run Wiresahrk on your connection to the server to capture the connections, you will see a connection HTTPS turns on TCP 443. Then when you select a pool of offices you will see a PCoIP connection come in. It comes to 4172 TCP from the customer to the login server, then UDP 4172 also from the Client to the server connection as well as UDP 4172 in reverse. For this reverse part, the source UDP port will be 4172 and corresponds to the destination UDP port source on the incoming UDP packets. Check that this is the case. This will prove that the login server is gateway your PCoIP correctly.

  So far so good.

  Then, you switch to your remote Client to view from on the Internet. To do this, you assign the URL of the "external" ExternalIP:4172 PCoIP. Note that you don't need to restart the login server for this to take effect. It takes effect immediately. This IP address will be the public IP address which will probably through a NAT/firewall to access your connection to the server. You can start by checking that the IP address is correct using to connect to the server address when you satrt the customer to view. When you use the same IP address to the Client and through the authentication step, it will prove that it is set up correctly in terms of Routing/NAT etc. Then follow with Wireshark on the login server and observe what happens when you select a pool of virtual offices and get the black screen. You should see the same activity PCoIP on your login server model as in the case of internal test (i.e. starting with the incoming TCP connection on port 4172). View Client will use the ExternalIP address that you specified in the "URL external PCoIP ' to establish the PCoIP connection to connect to the server. So if you don't see this com 4172 TCP on the login server, or you do not see the packets UDP 4172 then something is blocking. This is usually caused by a firewall or a proxy blocking PCoIP.

  If this is the case and you do not see these packets to connect to the server, then run Wireshark on the Windows Client to view and see if you can see 4172 TCP and/or UDP sent to this ExternalIP 4172. If Yes, then you know that something (such as a firewall or proxy) between the Customer View and the view connection server it blocks.

  Let us know what it was.

  Hope it will be useful.

  Select this option.

• my calendar is stuck on "mobile timetables for the server account" after mountain lion update

  my calendar is stuck on "mobile timetables for the server account" after mountain lion update

  HOPE TO HEAR SOME ADVICE PLEASE :)

  1) go in your user library folder (~ / library). Hold down the option/alt key while accessing the menu Finder go.

  2) go to the calendar folder

  (3) delete all files that say "cache" (replace the your desktop in the case where you want to move them at least)

  (4) always in the user library folder, go to the Preferences folder

  (5) delete the com.apple.calendar.plist (on the desktop again)

  (6) restart your computer

• driver for the ethernet connection on Pavilion M7750n

  Can someone direct me to where I can download the driver for the ethernet connection on Pavilion M7750n?

  The list of specifications HP:

  Hello:

  No, use the chipset XP driver...

  http://www.nvidia.com/object/nforce_winxp_15.26.html

• I use outlook express 6 and I can receive an email of great but when I try to send it after making the necessary changes, i.e. the signature I get the message 'too big for the server.

  I use outlook express 6 and I can receive an email of great but when I try to send it after making the necessary changes, i.e. the signature I get the message "too big for the server" responses I've seen so far tell me absolutely nothing

  Well, the error message says it all.  "" too big for server".

  There is a limit imposed by your ISP/mail server, which you don't mention.

  Not only the servers have limits on the size, this is not necessarily the same for incoming and outgoing messages.

  If you say you use the e-mail program and the name of your e-mail server, maybe we can shed light on the more specific issue, but the problem is definitely with them and not Outlook Express.

  P.S. I'm not sure what you mean by 'signature'

• don't remember my password for the internet connection

  I don't remember my password for the internet connection, I have a wireless router and when I try to connect my iPad 2 to the wi - fi connection it asks a password which I don't remember.  is it the same of it discover or to withdraw?

  You are the person who initially set the password for your wireless (WPA or WPA2?) or it's a long string of characters (WEP)? --> who is he?  WEP, WPA or WPA2?

  You need to connect to your wireless router and reset  Of course - you will need the router password (no password wireless.)

  Or - you can reset the router (according to the owner's manual) and set it up again.

• MMC hangs with print server when I try to print a test page for the server. Windows Server 2008R2 Printer HP1606n

  MMC hangs with print server when I try to print a test page for the server.

  Windows Server 2008R2

  Printer HP1606n

  Signature of the problem:
  Problem event name: BEX64
  Application name: mmc.exe
  Application version: 6.1.7600.16385
  Application timestamp: 4a5bc808
  Fault Module name: hp1100su.dll
  Fault Module Version: 0.3.1.36655
  Timestamp of Module error: 4dba6516
  Exception offset: 00000000000159bd
  Exception code: c0000409
  Exception data: 0000000000000000
  OS version: 6.1.7601.2.1.0.272.7
  Locale ID: 1033
  Information additional 01:00 c 6
  More information 2: 00c62f6d4134d9a2c3306d7c5b5b94b0
  3 more information: c9eb
  Additional information 4: c9eba0fb841db4dab90b359385c03455

  The module that seems to be the cause of the accident is the hp1100su.dll:

  Fault Module name: hp1100su.dll
  Fault Module Version: 0.3.1.36655

  The hp1100su.dll is a part of the driver for the printer.

  What you could try is uninstalling and reinstalling the driver of printer using the version of HP.

  I believe that the following may be the printer:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&lang=en&LC=en&product=4110410

• Certificate for the OSB 11.1.1.6.0 Version matrix

  Hello
  
  I couldn't able to find the certificate for the OSB 11.1.1.6.0 matrix - can some body help me.
  
  I need to know the weather above version of OSB supports - DB Oracle 11 g 2 and OS 11 Sunsolaris and candle material T4.
  It would be better if I can get certmatrix for sob11gR1.
  
  I looked on the following link
  http://www.Oracle.com/technetwork/middleware/IAS/downloads/fusion-certification-100350.html
  thre I couldn't find it.
  
  I have same info for version till11.1.1.4x osb, I need to 11.1.1.6.0.
  
  inCERMATRIX is given as - 11 GR 1 material (11.1.1.3 +)-supports the update of OS: Solaris 10 hardware: SPARC 4 +, Oracle 11.2.0.1 + > does this mean OSB 11.1.1.6.0 supports DB Oracle 11 g 2 and 11 Sunsolaris
  
  Thanks in advance
  Madhav
  
  Published by: user13839798 on July 20, 2012 12:58 AM

  When he says he is certified with db 11.2.0.3.0. does also implied that he is certified with DB CARS.

  Yes, when he says he is certified with Oracle DB 11.2.0.3.0, this means that it is certified with Oracle DB 11.2.0.3.0 CARS as well.

  Kind regards
  Anuj

• Incomplete reference of connection for the scott connection object

  Hello
  
  my application works fine in JDev 11.1.2.1 when deployed to integrated WS
  at the same time to the stand-alone deployment, I see an error:
  Incomplete reference of connection for the scott connection object
  Houston-26061 something wrong with JDBC
  
  the connection that Scott is defined as a data source
  where can be a problem?

  John is right. Configure the jdbc data source in wls and reference him module of your application configuration.
  If you look at the example of my blog and check the configuration, you will see that I have to refer to as "jdbc/DDH" jdbc data source My WLS I put in place since a data source with exactly this pointing to the BD JNDI name I want.

  Timo

• Failed to retrieve the mappings for the server. Reason: null

  I get the following in the Console error when I add or update my server

  [oolocal], (07 / 14 at 04:40:11): server is available. Get the settings from the server to the server
  [oolocal], error, 07 / 14 at 04:40:12, impossible to fetch Server mappings. Reason: null
  [oolocal], error, 07 / 14 at 04:40:12, failed to get the logs directory. Reason: null

  Standalone CF8

  Webroot in c:\inetpub

  RDS works (so I can browse the datasource)

  Kind regards

  Aaron

  This problem is known. Failed to retrieve the mappings for the server. Reason: null. We fix it.

  Just to check the parameters are collected successfully from the server. Create the project and join the server to the same. CFM open and type must identify the data sources.