Certificate SSL ERROR - problem

Similar Questions

• VCenter Server 5.1 SSL certificate update - error

  Hi all

  We set up a new Windows 2008 R2 server as a vCenter Server 5.1

  Now, I try to install the new certificates for all parts of vCenter (server, inventory, web client service,...) with the Windows certification authority.

  I'm stuck at the update server certificate SSL vCenter with the 'Certificate SSL Automation Tool'.

  This is part 5. in this guide (5. the cmd screen shot):

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 2041600 #updatestepsplanner

  All credentials are correct, but I still get the same error (vc-update - ssl.log):

  [26.04.2013 - 10:42:54, 99]: copy the new certificates and keys 'C:\ProgramData\VMware\VMware VirtualCenter\SSL. '... »
  [26.04.2013 - 10:42:55: 00]: creating the PKCS certificate file...
  Could not reload vCenter SSL certificates
  [26.04.2013 - 10:42:56: 22]: ""cannot reload the server vCenter SSL certificates. " The certificate could not be unique. » »
  [26.04.2013 - 10:42:56, 24]: new certificates and keys deleting...
  [26.04.2013 - 10:42:56: 25]: restoration of the certificates and the original keys...
  1 Datei () kopiert.
  1 Datei () kopiert.
  1 Datei () kopiert.
  [26.04.2013 - 10:42:56: 25]: attempt to restore...
  Could not reload vCenter SSL certificates
  [26.04.2013 - 10:42:57, 08]: ""cannot reload the server vCenter SSL certificates. " The certificate could not be unique. » »
  [26.04.2013 - 10:42:57: 10]: new certificates and keys deleting...
  [26.04.2013 - 10:42:57: 10]: restoration of the certificates and the original keys...
  1 Datei () kopiert.
  1 Datei () kopiert.
  1 Datei () kopiert.
  [10: 42:57, 13 - 26.04.2013]: failure of the update of the certificate of vCenter.
  
  
  So I tried the manual way, as it is mentioned in this guide:
  http://KB.VMware.com/selfservice/microsites/search.do?cmd=displayKC & docType = kc & docTypeID = DT_KB_1_1 & externalId = 2035005

  I'm stuck here too, get a 'result of Method Invocation: vpx.fault.SecurityConfigFault ' after ""Invoke method ': "

  1. Go to https://localhost/mob/?moid=vpxd-securitymanager & vmodl = 1 on the server vCenter Server and load the certificates for the configuration using the managed object browser.
  2. Click continue if you are prompted with a warning on this certificate.
  3. Enter a vCenter Server administrator user name and password when prompted.
  4. Click reloadSslCertificate.
  5. Click the calling method. If successful, the window displays this message: result of Invocation of method: Sub.

  
  

  I tried to fix this, but there is not really a solution for this:

  http://communities.VMware.com/thread/429035

  so, I need help with this question

  SOLVED!

  Steps to follow:

  1. stop the vCenter service

  2. search for your ID in LS_ServiceID.prop in the folder C:\ProgramData\VMware\VMware VirtualCenter

  3. copy this ID (e.g. {C4672589-9258-42B1-90E2-1EF268BBD402}: 5 )

  4. change your vpxd.cfg in the same folder and replace

  vCenterService

  with

  your ID

  5. start vCenter Service

  Then, the SSL automation tool works!

  You need to undo changes.

• Agent of the NAC this SSL error

  Running

  CAM: 4.5.0 lite

  Current Windows clean access Agent Version: 4.5.0.0

  Current Windows clean access Agent Patch Version: 4.5.0.0

  Agent Macintosh's own access current version: 4.5.0.0

  Course Cisco NAC Web Agent Version: 4.5.0

  (Clean access windows agent installed on the host (Vista Business) is version 4.5.1.0)

  CAS mode: L2 virtual OOB GW

  The installation program is in conditions of laboratory for a proof of concept.

  The following scenario occurs each time a new authentication is attempted from a vista host running the agent access.

  -------------

  I plug the host on the controlled NAC switch port

  I get an ip address although my pool of vlan and dhcp auth

  Agent of Cisco clean access is displayed on the screen according to the normal

  I enter my user and pass and click login

  I get a "security alert" pop up indicating "the revocation information of the certificate for this site is not available. Do you want to continue? »

  There are 3 buttons to choose: Yes, no, display certificates

  I click Yes, but the error message does not disappear,... no matter how many times you click on Yes,... the error remains on the screen, keep you from making the connection.

  If I click on no.

  The clean access agent then says "network error!, detail: Certificate SSL REV failed [12057]."

  My only option is to click on the "Close" button so I don't

  This closes the agent clean access, but the agent instantly appears buck on my screen asking again user them and pass.

  I enter the right user and pass and click login

  I receive a new security alert pop up stating "this page requires a secure connection which includes server authentication." "The issuer of certificate for this site is unknown or unreliable, making you go?

  My click Options, Yes, no, view the certificate or more information

  I click on Yes, the security alert disappears and own access now States that I managed to connect to the network.

  It refreshes my IP address and puts me in the vlan correct based on the role of my user name.

  -------------

  I checked the event logs, all my access attempts are accepted, (on the 2nd try of course), but there is no errors in the cam on this SSL problem.

  However, I get a warning red text on the summary page of the cam, which stipulates the following, which I do not know if it has any impact on my problem.

  "WARNING: the end-entity certificate issued by"www.perfigo.com"is suitable for laboratory environments only." You must import a certificate of third party entity end for your own Access Manager and own access servers before the Cisco NAC Appliance deployment in a production environment. Please check your own access servers and ensures Clean Access Manager for similar messages.

  WARNING: The current "www.perfigo.com" trusted certification authority is suitable for laboratory environments only. Cisco recommends to import a third-party certification authority. Please check your own access servers and ensures Clean Access Manager for similar messages. »

  My questions are,

  -Why used the CAA accepts the first authentication attempt?

  -How can I remove the first security alert?

  -How can I set the CCA so that I login just once without having to click on no and wait for CAA to appear a 2nd time?

  Thank you all

  The fundamental problem is that the customer is unable to check the root certificate for your CASE.

  I guess that since you have always the perfigo warning that you have not installed a certificate valid on the job. If you did, you must remove the certificate of perfigo. If you install a valid certificate, you must remove the Perfigo cert.

  Once you have a valid cert installed, make sure that the client can access the certificate server root of the AUTH VLAN. That should get rid of these two messages.

  If you cannot provide access to the certificate server, then you cannot get rid of the second message, but you can get rid of the first message (the one that sticks you in a loop).

  This message (the first one) is due because the check certificate revocation in Internet Explorer has been enabled. This option has been disabled by default in XP, but is enabled by default in Vista. The option is disabled in Internet Options > Advanced tab > check the CRL.

• MMIC certificate import error

  I try to install the stand-alone UCS Nagios plugin to monitor our C240M3 which uses the XML API to read the data from the sensor, when I try to use the plugin with the self-signed certificate of MMIC I get the SSL error, so I thought that no problem I'll generate a cert for the MMIC of our internal CA. I produced a CSR in the webUI MMIC according to the instructions and left our CA cert, but I have problems to import the certificate.

  I tried the DER encoded .cer file both a B64 and I also tried to import the chain into a .p7b file and I get "certificate Upload Failed. Could not validate"of the MMIC every time.

  As I said I am trying this on a C240M3 and it is running v 2.0.1(a) I know 2.0.1(b) is out, but I saw nothing about SSL certificates in the release notes and we are a 24/7 facility, and it would be at least two weeks before I can schedule downtime to perform the update.

  I came across something very similar recently trying to sign and to download a third party PositiveSSL certificate (public certification authority).  It could not download, and TAC has determined that it was due to the presence of an attribute extended usage (EKU) key, namely "SSL client: Yes.

  See https://tools.cisco.com/bugsearch/bug/CSCup26248

  If this is the same bug that you are running in, I suggest you open a TAC case and related it to this Bug ID.  This gives Cisco a better indication of the number of people affected and the priority more that he'll get to the extent where attaches.

• SSL error after upgrading vSphere

  I upgraded to vCenter Server 4.0.0 today and the following plug-ins do not load when you start the VI - material status vCenter client and vCenter Service status.  The error message in the window manager plugin is "the following error occurred during the download of the plugin script of https://servername:8443/cim-ui/scriptConfig.xml: Impossible to connect to the remote server."  The tab overview of performance also does not work either.  After some searching through the logs I have determined that when the management of Web Services service starts it generating SSL errors.  The newspaper of vpxlicent I see several messages "Validation SSL failed in WebRequestPatch" followed by "no connection could be established because the target machine actively refused it" when it tries to download the scripts for plugins.  In addition, I see it in the tomcat log, catalina.2009 - 07-23, when to start the service of Web services:

  SEVERE: End Point initialization error

  java.io.IOException: could not decrypt entry content secure: javax.crypto.BadPaddingException: given the final block not well padded

  Followed a few seconds later by the present (after much more SSL error messages similar to the one above):

  NEWS: Stop Coyote HTTP/1.1 on http-8443.

  I'm assuming that the last line is the reason why I can not connect on port 8443, and why a netstat doesn't show anything listening on this port on my box of VC.  I know that my certificates of work (up to a certain point) because if I connect via https on port 443 for my box of VC, it works fine.  It is only by trying to connect to 8443 this problem occurs.  I already tried the steps of http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1010641 even if I don't get all messages that point to problems of name resolution and it did not help. 

  Anyone have any ideas?

  I had same problem as described above. In my case, the reason for which the 8443 service did not start is that tomcat was trying to use the wrong password to open the file rui.pfx. I did the following to solve this problem.

  1.) stop windows services on vCenter

  (2.) %PROGRAMFILES%\VMware\Infrastructure\tomcat\conf\server.xml open in Notepad

  3.) search for "< connector port ="8443 ""

  4.), you will see that this line refers to the rui.pfx certificate file that was change when you updated your certificate. Update the 'keystorPass =' for the password of the rui.pfx certificate.

  5.) start the vCenter services

  NOTE: The password cannot be empty for the rui.pfx as it was in my case, because this would cause its failure. I had to import and then export the rui.pfx with a password to get the above to work for me.

  Hope this helps guys.

• Client certificate SSL V3.0

  How can I connect to a web service that requires client certificates SSL V3.0 using CFMX?
  
  I am trying to use a client certificate to connect via CFHTTP a secure Web site and I'm getting a "403.7 - Forbidden: certificate customer required" error. I have correctly installed the Web site cert by following the instructions here:
  http://www.TalkingTree.com/blog/index.cfm?mode=entry & entry = 25AA75A4 - 45a 6-2844 - 7CA3EECD842D B576
  
  When I access the secure site using IE, I am asked to use the installed client certificate, and then I'm able to view the content secure without no 403 errors.
  
  After completing the research question, I read in this post that CFMX7.01 does not support the SSL V3.0 protocol:
  http://www.houseoffusion.com/cf_lists/message.cfm/forumid:4 / messageid:229870 / step: 0
  
  Did someone using client certificates SSL V3.0 with CFMX7.01? Is it a question of Adobe or java problem? Are there alternatives?
  
  

  CFX_HTTP5 worked great!

  I wish just called him 'good '. I asked the question about a popular mailing list and got absolutely no response. I also searched Google for a few hours and did not find anything. CFX_HTTP5 did the job and now I can finish what I started instead of saying my client I found a mission critical issue that ColdFusionMX couldn't do.

  Thanks again!

• SSL error rate high FxM

  Hi all

  I had a problem with my customer site, some analyzed server are SSL error very high rate. It can go to 95% + that almost all of those transactions cannot be retrieved later in FxV well, some other quite normal. After discussion with the customer, know that they just upgrade their 32-bit Windows to 64-bit Web server. And they remove the entry of these servers in server monitor FxM and back again. But it does not help. Any idea, people?

  Thank you

  Asun

  Hey Joe,

  This is the screenshot of alarm showing the SSL error rate.

  

  If these servers are the servers that have just improved 32 bit - 64 bit. But there are 4 servers do not encounter the same problem not been updated too...

  Thank you

  Asun

• Certificate SSL VPN

  Hi all

  I have configured the SSL vpn client and the client less ssl vpn, but I am not able to connect cisco vpn client softrware and also browser, because of certificate problem, can you please tell how to create the certificate SSL VPN

  Thanks and greetings

  Rajesh Gowda

  Sign up for a certificate from a public certification authority and use the FQDN to connect to the VPN. Then these warnings should not appear.

• Why the websites of google is the ssl error

  Hello

  My computer is able to use the internet perfectly except when I try and connect to any website of google (google.com, youtube, gmail, etc.), it gives me an ssl error saying

  Unable to connect to the real mail.google.com

  Something is currently interfering with your connection to the site mail.google.com.

  Try to reload this page in a few minutes or after switching to a new network of. If you have recently connected to a Wi - Fi, finish connect before recharging.

  If you visit mail.google.com right now, you could share any private information with an attacker. To protect your privacy, Chrome does not load the page until it can establish a connection to the real mail.google.com.

  At first, I thought it was a browser issue, but it's the same on all my browsers (IE, firefox, chrome). I even tried to disable my firewall, but the problem persisted. Also, it is not a router problem as google sites work fine on all my other devices. I also ran a full sweep of mcafee, and no problems were found. Please help me.

  OK guys I found a solution, if anyone else is having the same problem and that is that my computer time has been bad so now correct the time that google Web sites began to work.

• How do I configure the iPad2 to synchronize the iPad-Mailclient with Exchange 2010 via Active Sync using the certificate SSL client and name of user and password?

  Active Sync iPad ssl Client certificate

  How do I configure the iPad2 to synchronize the iPad-Mailclient with Exchange 2010 via Active Sync using the certificate SSL client and name of user and password?

  Hi Ewoki,

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the TechNet Exchange forum. Please post your question in the Forums TechNet in Exchange Server.

• Filter error problem

  Is there an estimate as to when the "Filter error" problem will be solved for Sierra 10.12?

  Hi greyparrot,

  Please use the workaround provided in the support article until 10,12 drivers are available.

• Error code 101-752 dotnet framework error, problems to load the new software of the printer

  Error code 101-752 dotnet framework error, problems to load the new software of the printer

  Hello

  (1) have you made changes before the start of this issue?

  (2) when you get the error message?

  (3) is the specific question of the installation of the printer software?

  (4) what is the brand and model of the printer?

  It seems that you need to fix .net Framework installed on the computer. Follow this link and see if it helps.

  Fix the .net Framework installation

  http://support.Microsoft.com/kb/976982/en-us

  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756 /) how to back up and restore the registry in Windows

  See also:

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Let us know if that helps.

• Windows mail send any ip ok no error. Ox 800ccc79 cylindrical invalid not port 25 secure SSL error 550 Server

  Windows mail send any ip ok no error. Ox 800ccc79 cylindrical invalid not port 25 secure SSL error 550 Server

  You try to send a file larger than 20 MB.  Try to reduce the size of the attachment of zipping it or go to tools | Accounts | Mail | Properties | Advanced and select the option to break messages apart large.  However, many recipients servers will not accept messages exceeds 10 megabytes, then you could try to send via another method.  BTW, if you attach a file, it must be encoded to be sent by e-mail, and this coding adds about 30-50% the size.

  Steve

• Cannot create PDF from Web Page with Certificate error. Error: "problem with SSL H99350"

  Is there a way to bypass it through some Adobe Acrobat settings? Maybe a way to get Acrobat 'trust' of the site?

  In Internet Explorer, I can simply click, "Continue to this website (not recommended)" and Web page will open, but Adobe Acrobat does not give me a similar option.

  I also tried to convert the Adobe Acrobat in Internet Explorer add-in, however, it does not have the same options, such as the number of levels down, copy Web site (I need to copy the entire site).

  Installation program:

  Windows 7 Enterprise SP1

  Acrobat Pro 10.1.15

  Capture Web site:

  https://www.kernelmodular.com/

  Hi rickreyna,

  Please refer to this topic SSL protocol error.  Certificate is either not valid, or the common name or authority are not recognized. I have , might be useful.

  Kind regards
  Nicos

• Problems installing certificates SSL on a RV325

  IM pretty new to this router interface and I need help to install my external certificates on my RV32x router.

  I created my CSR, it has provided to the authority of SSL.  Both my web certificate (X.509) and my intermediate CA was provided to me.   The router's request. PEM format certs, so I made sure that the format of certificates followed lines of anchor text (BEGIN CERTIFICATE and END CERTIFICATE).

  No matter what I do, any order, format, the combination of keys (X.509 and CA) intermediate - and I went so far as to reissue the certificates and start from the beginning.  I've recreated the CSR, had the power of SSL to send me new keys and tried again the steps (in case I missed something, Miss a step, or SOMETHING...). I even went out to HQ and got another case here, there was a problem there.

  I got errors where it is said that the "key Certification is not valid." "" Check the public key for the date and time... ", etc.  All seem like mistakes that don't relate to the action, I show.

  Someone at - he had that same experience and found a way through it?   I thought I was pretty knowledgeable in this area, but I'm guessing me!  :)  Any help would be greatly appreciated.   It shouldn't really be this difficult!

  Hi Scott,.

  Could you try it by following these steps:

  Before you measures make sure that you have a backup of your original file

  1. open ciscorouter.pem with Notepad + or PSpad.

  2. you can find there is a private key and three certificates in the file.

  3 copy the private key and the first certificate include the begin/end message.

  -----BEGIN PRIVATE KEY-----

  .

  .

  .

  -----END PRIVATE KEY-----

  -BEGIN CERTIFICATE-

  .

  .

  .

  -CERTIFICATE OF END-

  4. Paste the content in step 3 to a new file named Cer_plus_private.pem.

  5. make sure that there is two newlines in the end, then save it. [This is the workaround for]

  This problem].

  6 copy the certificate to the second and the third certificate include the begin/end message.

  -BEGIN CERTIFICATE-

  .

  .

  .

  -CERTIFICATE OF END-

  -BEGIN CERTIFICATE-

  .

  .

  .

  -CERTIFICATE OF END-

  7 paste the content in step 6 to a new file named CA.pem and save it.

  8 import CA.pem and Cer_plus_private.pem in RV32x.--> success.

  Kind regards

  Aditya