Certification of storage - tests failed with the "VM is in an invalid POWER State for operation"

Similar Questions

• IOVP NIC certification broadcast test case failed due to "VM is in an invalid POWER State"

  Hi, I use workbench 3.0.2 to run VMware Esxi 5.5 U2 NIC certification.

  I spent the first 3 automated cases: Install::Driver:VIBwithTestKey, Install::Config:Driver Update, Version_Check.

  Now I'm stuck with the case of dissemination because of the error "VM is in an invalid POWER State", but it's ok for me to start the VM manunally.

  2 virtual machines are created and fully automatically started on host by workbench, and two of them are assigned the same name 'vtafVM1_192.168.49.168_4740'.

  The newspaper on the workbench is as below:

  [March 25, 2015 02:34:21: VIRTUALMAC] [0] DEBUG: end CreateVirtualNic()

  [March 25, 2015 02:34:21: TESTHASH] [0] FRAME: reuse an available in the container instance

  [March 25, 2015 02:34:21: STAFBASE] [0] FRAME: command execution STAF: staf VTAF_VM localhost connect agent 192.168.49.168 root password userid: 8:np2010nP ssl

  [March 25, 2015 02:34:21: STAFBASE] SETTING [0]: command execution STAF: staf VTAF_VM POWERON localhost anchor 192.168.49.168:root vm 'vtafVM1_192.168.49.168_4740' WAITFORTOOLS N

  [March 25, 2015 02:34:23: STAFBASE] SETTING [0]: command execution STAF: staf VTAF_VM POWERON localhost anchor 192.168.49.168:root vm 'vtafVM1_192.168.49.168_4740' WAITFORTOOLS N

  [March 25, 2015 02:34:23: STAFBASE] [0] FRAMEWORK: RC:7149

  [March 25, 2015 02:34:23: MULTITECH] [0] FRAME: called VTAF::TestLib:Sphere:Lib: STAFSDK::HostSystem: PowerOnListVMs (password = "np2010nP" user name = 'root' VMNames ='vtafVM1_192.168.49. ) 168_4740, vtafVM1_192.168.49. 168_4740 'HostName ='192.168.49.168 ') returns "RC: 7149 ErrDesc: VM is in an invalid POWER State for operation: ErrMsg: VM is in an invalid POWER State for operation: receiving Exception: com.vmware.qa.staf.common. " EOperationFailed Trace: com.vmware.qa.staf.vc.vm. STAFVirtualMachine. checkAllowedCurrentPowerState (STAFVirtualMachine.java:1774) # com.vmware.qa.staf.vc.vm. STAFVirtualMachine.powerOn (STAFVirtualMachine.java:394) # com.vmware.qa.staf.vc.vm. VMSTAFService.handlePowerOn (VMSTAFService.java:4194) # com.vmware.qa.staf.vc.vm. VMSTAFService.acceptRequest (VMSTAFService.java:470) # '

  [March 25, 2015 02:34:23: TESTHASH] [0] ERROR: cannot run processSetup for configuration: cannot run handleHostVMObj for configuration: RC: 7149 ErrDesc: VM is in an invalid POWER State for operation: ErrMsg: VM is in an invalid POWER State for operation: receiving Exception: com.vmware.qa.staf.common. EOperationFailed Trace: com.vmware.qa.staf.vc.vm. STAFVirtualMachine. checkAllowedCurrentPowerState (STAFVirtualMachine.java:1774) # com.vmware.qa.staf.vc.vm. STAFVirtualMachine.powerOn (STAFVirtualMachine.java:394) # com.vmware.qa.staf.vc.vm. VMSTAFService.handlePowerOn (VMSTAFService.java:4194) # com.vmware.qa.staf.vc.vm. VMSTAFService.acceptRequest (VMSTAFService.java:470) #

  [March 25, 2015 02:34:23: TESTHASH] WARN [0]: found objects that need to be cleaned

  [March 25, 2015 02:34:23: VIRTUALMAC] [0] INFO: cleaning of the VM: vtafVM1_192.168.49.168_4740

  [March 25, 2015 02:34:23: VIRTUALMAC] [0] DEBUG: PowerOffVM() method called

  I fixed it by name NIC different setting on the host and to the. If I put the test both network adapters on the host and the slot the same name, for example, the two vmnic4, starting the virtual computer fails; If I put one like vmnic4 and the other as vmnic5, the virtual machine starts ok.

  I think it should be a bug in the combination of test IOVP NIC.

• Storage migration fails with the error: could not complete the network copy to path to the file

  Hello

  I have two hosts ESXi 5.5 with local storage and VMware vCenter device which manage them. Everything worked well until that time.

  Now when I try to make the host migration and storage, processing or power off the virtual machine, I get the error message:

  Could not complete the network for file /vmfs/volumes/.../path/to/file.vmdk copy

  The situation is the same when I try to deploy VM on ESXi-2 model that is on ESXi-1.

  All with the network configuration is correct. I have ping between the hosts on ESXi and ESXi and vCenter. No firewall hosts ESXi and vcenter. No physical firewall between hosts.

  The network latency is less than 1 ms. No packet loss.

  I read this VMware KB article: Storage migration fails with the error: could not complete network file copy and I tried solutions explained here, but the results are the same.

  You have ideas where the problem may be?

  Hello guys,.

  I finally found the problem.

  ESXi servers are configured with MTU 9000, but the switch where the hosts are connected was a bug documented with frames. I found the problem after finding this article http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1003734

  I run the command of ESXi-1:

  vmkping - d-s 8972 192.168.10.12 where 192.168.10.12 is the ip address of ESXi-2

  The result was:

  3 packets transmitted, 0 packets received, 100% packet loss

  as a workaround, I reduce the MTU to 1500, then I patched the problematic switch.

• Storage test 55 certification vmotion, storage vmotion fails with "Could not lock file" on the virtual machine during storage vmotion

  In my view, that it is a known problem in ESXi 5.5 Update 2 release notes, someone knows a solution yet? This is an excerpt from the release notes:

  • Attempts to perform live storage vMotion of virtual machines with RDM disks can fail
    Storage vMotion of virtual machines with RDM disks can fail and virtual machines can be considered in turned off of the State. Attempts to turn on the virtual machine fails with the following error:
    
    Cannot lock the file
    
    Workaround: No.

  VMware support for the record said that the patch will update 3, it is known as an intermittent problem. Finally, it happened to me on the 9th attempt.

• Storage vMotion fails with the error below

  I'm trying to run a virtual machine's storage vMotion. It fails with the error below.

  This method is disabled by 'moref = 17705'

  #1 method - manually remove the entry from the VCDB.

  • Stop the Service of VC.
  • Connect to the SQL Instance.
  • Run the SQL for VCDB.
  • Select * from VPX_VM WHERE name LIKE '% VM_Name % '.
  • Note the ID of VM in column 1.
  • Validate the stale entry.

  Select * from VPX_DISABLED_METHODS WHERE ENTITY_MO_ID_VAL = "vm - ID".

  • Remove obsolete entries.

  delete from VPX_DISABLED_METHODS WHERE ENTITY_MO_ID_VAL = "vm - ID"

  • Start the VC service.
  • Try Storage vMotion.

  Method #2-si this does not work, save the *.vmx file once again which will fix the problem.

  Note: To do this, you will be required to server unavailability.

  • Power off the virtual computer.
  • VM unregistered inventory.
  • Navigate to the path of the data store and VMX re-register.
  • Start the virtual computer.
  • Try Storage vMotion.

• Uninstaller fails with the message < internal error - cannot find utCompiledCode record for this version of the uninstaller

  Computer = Sony Viao running Vista SP 2. Uninstaller for Windows seems to be corrupted when trying to uninstall 'Adobe Air' (which is reported at startup). Installer UN seems frozen in an unfinished task. Attempts to install a program displays ... Microsoft FixIt for problems installing could not solve it. What is a utCompiledCode? and the Setup program itself is re-installed/updated? You want to avoid the system restore because of recently resolved driver h/ware problems.

  Hey Johnwarrell,

  You can try using this free program. I don't know if it can uninstall your program, but it he finds it and if you can uninstall it can even erase files that cannot be deleted by windows. I guess there is no need to repair or reinstall Windows Installer.

  http://www.revouninstaller.com/download-professional-version.php

  Good luck!

• has failed with the error: 1648

  Hello

  I tried install the latest update to Acrobat DC and he has failed, is not updated, this is the messege I got:

  "

  Exit code: 7

  Please see specific errors below for troubleshooting. For example, ERROR: DF037, DR013...

  -------------------------------------- Summary --------------------------------------

  -0 fatal Error (s), 1 Error (s)

  -Payload: Acrobat Professional 11.0.0.0 {23D3F585-AE29-4670-8E3E-64A0EFB29240}.

  ERROR: MsiConfigureProductEx failed with the error: 1648 - no valid sequence were found for all the updates.

  MSI error message:

  -------------------------------------------------------------------------------------"

  Any idea, thoughts?

  Thank you

  Hey ErezMel,

  Could you please try download Acrobat ms from the below mentioned link:

  Download Acrobat products | Standard, Pro | DC, XI, X

  Please make sure that you are logged on as administrator, and anti-virus is disabled because that could interrupt the installation process.

  Then, let me know if this sorts this issue.

  Kind regards

  Ana Maria

• HPDM deployment fails with the error code: 14031022

  Hello everyone,

  I ve a strange problem with a new repository of child I ve created two weeks ago. Following situation:

  We have a master and (until now) repository repository a child for two locations. Capture and deployment on each side works fine. Now we're getting a third place, so we need another hpdm gateway and a child repitory to this place.

  I've added and configured as one worked and insert the IP address of the gateway again to a thin client to the new location. When I deploy an image on this client, I get the following error in the console of hpdm:

  2014-12-16 11:02:09 Assign repository: repository child name repository
  2014-12-16 11:02:13 synchronized correctly Completed.
  2014-12-16 11:02:14 task sent to the device management gateway
  2014-12-16 11:02:17 task has been retrieved from the agent.
  2014-12-16 11:02:58 deploy the image ready using the repository: repository child name guard.
  2014-12-16 11:02:58 running common-task failed.
  2014-12-16 11:02:58 Errorcode: 14031022, error details: download the file (s) failed.
  2014-12-16 11:02:58 running common-task failed.
  2014-12-16 11:02:58 Errorcode: 14031022, error details: download the file (s) failed

  Agent of Thin Client Gateway: 4.5.3660.18502

  HPDM bridge officer: 4.5.3660.19.503

  agent update task works.

  I ve configured the shared folder and FTP access. Both are available from thin client. Configuration of the repository the two test passed successfully.

  Repository of child synchronize all the data from the master repository with success.

  Usually, I use FTP in IIS services, but filezilla I ve installed (disabled FTP IIS) for the best connection.

  Connects to the deployment task:

  000027) 16.12.2014 11:02:27 - (not connected) (10.32.2.52) > connected on port 21, sending the welcome message...

  16.12.2014 (000027) 11:02:27 - (not connected) (XX. XX. X.XX) > USER test

  16.12.2014 (000027) 11:02:27 - (not connected) (XX. XX. X.XX) > 331 password required for the test

  16.12.2014 (000027) 11:02:27 - (not connected) (XX. XX. X.XX) > PASS *.

  16.12.2014 (000027) 11:02:27 - test (XX. XX. X.XX) 230 > connected

  16.12.2014 (000027) 11:02:28 - test (XX. XX. X.XX) > FEAT

  16.12.2014 (000027) 11:02:28 - test (XX. XX. X.XX) > QUIT

  16.12.2014 (000027) 11:02:28 - test (XX. XX. Goodbye > 221 X.XX)

  16.12.2014 (000027) 11:02:28 - test (XX. XX. X.XX) > disconnected.

  Next, I get the above error HPDM. The server log HPDM said next.

  2014-12-16 11:11:35 [line 2] WARN Util - revertNumericString fail: k.A.

  2014-12-16 11:11:35 [line 2] WARN Util - revertNumericString fail: k.A.

  Mhh not a lot of information.

  I Don t really get what could be the problem. You have an idea? Do you need more information (newspapers, error message TE) for assistance?

  Concerning

  Martin

  After the coup of controller.conf and the screen of the dialog editor repository that you set, your master repository was not configured this way:

  ReposPath has the value "C:\Inetpub\Ftproot\HPDM" in controller.conf (assume C:\Inetpub\Ftproot is the root directory of the FTP server)

  In the Master repository Editor dialog box:

  Implement FTP path to ftp: / //HPDM - he WS ftp: / /<>/. your screenshot.

  This is the reason that all of your linked FTP task failed with the same error code.

• KB2183416 Windows Update for IE8 repeatedly fails with the error code "WindowsUpdate_8007371C" "WindowsUpdate_dt000"

  KB2183416 Windows Update for IE8 repeatedly fails with the error code "WindowsUpdate_8007371C" "WindowsUpdate_dt000"

  Whenever I run this update, it seems that it installs about 90% of the way but then stops and breaks down about 20 seconds later.  If someone else sees this problem and is at - it a solution?  I'm running Vista Home Premium SP2 and KB2183461 is listed as a critical update for my system.  Help?

  Preliminary stage: If the Tea Timer of Spybot is enabled, please disabled until we finished this thread. Seehttp://aumha.net/viewtopic.php?f=26&t=32409

  Tip: If you don't fully understand what Tea Timer does and how it does, leave it disabled permanently.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  McAfee applications (and Norton) are known for not not upgrade (or uninstall) "clean". If you have McAfee Security Center installed since you bought the computer, he is been updated (automatically) several times. Try the following:

  1. run this triple McAfee fix: http://service.mcafee.com/FAQDocument.aspx?id=TS100507

  2. after reinstallation of McAfee Security Center to step #3 patch triple, manually & repeatedly updated McAfee Security Center until you get one invite "no updates more".

  3. OPTIONAL: If you have had problems with IE8, open IE8 (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

  4. OPTIONAL STEP: Open IE8 (only) to http://support.microsoft.com/kb/971058 & run the difficulty by DEFAULT inside and modes and AGGRESSIVE. [1]

  5 restart and test by launching a manual check of updates & see if KB2183461 now installs. See...

  How will I know if my computer is up to date?
  http://Windows.Microsoft.com/en-us/Windows-Vista/how-can-I-tell-if-my-computer-is-up-to-date

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or updates installed (Vista & Win7).

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Microsoft FixIt fails with the error 0x80004005 when run in the Standard user login

  Microsoft recommends running in a Standard user login.  However, the FixIt will not work in a Standard user login, even if started with "Run as Administrator".  It comes up with an empty window of FixIt if started without "Run as Administrator".  If started with 'Run as Administrator', it fails with the error: 0x80004005.  Don't miss this way 'by design', given that Microsoft must often State?

  Thank you

  el_abuelo

  Hello El_Abuelo,

  I went to the site you have included but the beta for Windows 7 users is full and I can't test what you are experiencing. They give you a site to give feedback on the beta product? If so, then please send a mail telling them of your question. If you already have a fix Center account, please log in to access your account on the site of difficulty It Center.

  If they don't give you a place for your comments, you can use the General Windows 7 comments page and don't forget to clarify that it is the Fix It center beta product for which you give your comments. Clickhere for a link to the forum Windows 7 comments.

  Thank you for making the point about your problem.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• CP1525nw: new router: cp1525nw wifi install fails with the vague error message

  Product: HP Laserjet Pro cp1525nw

  OS: WIndows 8.1

  Hardware: Computer Asus laptop

  Recently received new router from Verizon (FIOS), model FQG1100 BHR4 router

  Purchase printer in 2012.

  Printer has worked with the old router; It will not communicate with the new router.

  For four days I deleted the printer from the laptop several times and tried to reinstall using the wifi. Installation instructions say to run the CD, select wifi, connect the USB cable when prompted, configure, remove the cable when prompted.

  When I attach the USB cable, Setup starts, but it expires ("taking too long") or fails with the vague message about not finding the product. I'm never invited to an SSID.

  I tried a USB installation and it worked; If the USB cable is good.

  Share print files & Windows is activated.

  I tried to re - adjust the printer by default and insured menu wifi said 'ON' for the wifi.

  I run a wireless network test report:

  SWITCH for wireless, wireless and security.

  Failure of network name (SSID found).

  DO NOT RUN for: printer settings consistent with the settings of the wireless router, no filtering, connected, the signal strength, other networks detected.

  Wireless netwrorks detected: 9

  I note the router label does not say "SSID", but said "ESSID".

  I have ideas for what to try.

  Please post here or send message to [personal information deleted]

  Last night I finally got to work.  I removed the printer entirely from the PC and rebooted. I turned off the printer. I ran a cable to the router (cable modem). I have reset the router, which then assigned an IP address to the printer. I changed the security settings on the router to use WEP instead of WPA. I ran the HP printer, Setup - and he finally presented me with the screen to "provide the SSID.  The program is run properly. I printed a test page. I changed the router security to WPA2. I printed a test page.     I tried to restart it and reprinted.  I also tried to remove the cable and then print again - printing failed.

  In short, I needed to do two things: connect a cable and change the router temporarily WEP for installation.

  In my case, my printer is close enough to the router with the cable.  A bit disappointing that the true wireless will not work, but I can print wireless from my laptop.

  I saw how many people have had the same problem, I had, and how much of HP is of any help to solve this problem.  I am convinced that the printer has a defect.  I hope that my posts will be useful to a few people having the same problem.

• Oh, Snap! Build request failed with the message: [ERROR] CAP exception has occurred

  Hello. Pls I just got the error "Oh Snap!" "Build request failed with the message: [ERROR] CAP exception occurred" when I tried a test package ' Helloworld ' procedure follwing illustrated app on "http://developer.blackberry.com/bbos/html5/documentation/creating_hello_world.html."

  I need your help pls.

  Hello!

  Thank you for your response. I uninstalled "jdk-7u25-windows-i58" and got 'jdk-6u35-windows-i586', and his work well at the moment. I hope that I have no problem to use an older version.

• EMCA fails with the error "ORA-01034: ORACLE is not available.

  Hello
  10g R2 on AIX I have the following error:

  emca -config dbcontrol db -repos create
  ......................................................
  .....................................................
  Password for DBSNMP user:
  Invalid username/password. [ORA-01034: ORACLE not available]

  And that's because all oracle processes are runing with:
  ORACLE_HOME=/U00/Oracle/product/10.2.0/Db_1/
  
  EMCA fails with the error "ORA-01034: ORACLE is not available" and "Name of user and password invalid." For DBSNMP user [ID 550484.1]
  It is said:

  +<moderator edit - removed MOS content>+

  Can I do the reverse and in the script of the emca, add "/" at the end of ORACLE_HOME=/u00/oracle/product/10.2.0/db_1
  ??
  Thank you.
  
  Edited by moderator - content removed from MOS

  Hi user;

  First of all please do not post details here, its against to oracle interoperability metalink, ID is sufficient for us. Secondly, yes you can, first to save $ORACLE_HOME/bin/emca script like

  CP $ORACLE_HOME/bin/emca $ORACLE_HOME/bin/emca_org

  to change the file number and test

  Respect of
  HELIOS

• Exit 11 topic: config fails with the error analysis

  No problem after installing version 11 until they tried to use
  Subject: config which failed with the following message.

  XML parsing error: undefined entity
  Location: subject: config
  Line number 59, column 1: key = "& focusFilter.key;" modifiers = "accel" oncommand = "document.getElementById('textbox').focus ();" / > "
  ^

  The problem was caused by Prefsearch addon. I have notified the
  Developer.

• I want to display the number of success / testing failed in the Testtand of xml report, please help me

  Hi, I want to display the number of success / testing failed in the Testtand of xml report, please help me.

  Later, my requirement is that I should be able to view the number of test / has not passed in the header of the report too.

  I have attached a sequence to give you an idea of how to get the number of results (I don't check it works ), I used 'SequenceFilePostResultListEntry' callback to calculate the number of results.

  and the number of results is passed to the 'ModifyReportHeader' through Globals files, where you can edit the XML file to display in the Repot (follow the link in my previous post).

  Hope this helps

  AshwiN,