CF Clustering & amp; Suppression of errors

Similar Questions

• Inventory.XML error during installation; Occurs when I choose NŒUDS RAC...

  Hi all

  I had a RAC Cluster two node just "network services" and I have a unique layer apps that I use just for the apps layer.

  The issue I'm running is when I chose the 'NŒUD of CARS"to select two clusters, I get this error...

  I downloaded a screenie to show you what I mean.

  

  Hello

  You will first need to run rapidwiz once on the node RAC finished fast on RAC nodes installation, you need to run rapidwiz on the applications node.

  Kind regards

  Hugues

• HP mini 1000 PC

  I have a hp mini 1000, I have not used in a while so I forgot my password! It keeps saying & amp; amp; quot; fatal error... System stopped. CNU9075DKL

  try this master password for your mini (be sure to type the correct number/letter) > e9lo1xqtsk

• MediaSmart does not work

  The computer is a Pavilion dv8t-1100

  Menu start MediaSmart does not work
  (This second button on the Panel. Between the power button and multimedia keys)

  I have installed:

  sp48159 HP Quicklauch buttons
  sp38358 QuickTouch
  sp53677 Firmware update to correct the folly of Wi - fi

  sp45617 set the tone of HP

  sp46762 MediaSmart StartMenu
  sp48552 MediaSmart StartMenu

  (None worked)

  What have I forgotten?

  I'll give Dragon-fur a break here.

  It works for the HDX series as well as the dv8 as they are the same machines when it comes to the window hot key at the top of the key board. I'm running a retail version of W7 on my dv8 and that's what I did to get the buttons works. It should work with a version of HP of W7.

  Stop first uninstall the Quick Launch button software, it is not necessary on the dv8 or the HDX for that matter. HP is installed on most of the machines as a utility cover, but it is not necessary here. After you uninstall it, restart your machine. It's just a heavy program that runs in the background that takes resources.

  Next go to "Computer" click on this > "C" drive > Program Files > Hewlett-Packard > HP Media Smart.

  This assumes that you are running a 64-bit version, I'm sure that all of the dv8 were 64-bit.

  Note that the HP Media Smart file, i.e. when the Menu is one that operates the Media Smart quick launch button that stopped working on your machine.

  Uninstall everything and any Smart Menu Smart Media go program and has and restart. Then go back and find the file HP Media Smart from above, it should be gone. If this isn't the case, right click on it to remove it and restart.

  Also at this point, the file must be empty if it is not, please take a screenshot of what is there. Do not delete the file if it is not empty. I need to see what there is everything first, but in most cases after that uninstall in the Menu it is empty.

  Go to this link and follow it's weird instructions to the letter. It does not matter what os versions Media Smart applications that you have, but you need at least one to get the menu to work. I have Media Smart DVD and MS Web Cam.

  Go to the solution.

  http://h30434.www3.HP.com/T5/notebook-display-and-video/on-screen-volume-treble-amp-bass-display-error/m-p/371493

  Make sure and restart as the guidelines underline in the solution and the two files must be saved in the office and fled from there, not in a temporary folder.

  Which leads to stop working, it stops after an update of Windows or software you have installed? Or you have installed a commercial version of W7 and now you can not make it work?

  Note that the solution is to deal with the OSD volume, but this Menu should allow your icons MS appears when the MS button is pressed.

• Windows View customer-non-interactive flag does not work

  I use the windows 32 bit Horizon View Client (latest version) in a program to automatically connect to a virtual machine.  The '-not interactive "flag is supposed to remove the error messages, but not the session time-out error is deleted even when this flag is set.  The syntax I use is "wswc.exe - non-interactive - unattended - serverURLxxx.xxx.xxx username - password desktopName xxxxx-xxxxx - xxxxx".  Am I missing something?

  The official word from VMWare: "The - non-interactive option suppresses the error message boxes when starting the Client view and would not remove a mistake during a view as a session time-out error."

• isLockout on weblogic

  Hello
  
  I opened the question below and I've been advised to open it on this forum. Please help, if anyone knows how to solve this problem.
  
  isLockedOutUser on weblogic
  
  Thank you.
  
  I want to know the State of a user is locked or unlocked in weblogic. I used the code below. My localhost all it works but when I deploy on the server I can not get the correct result even the user is locked.
  I got no errors, but the status is not correct.
  
  Someone at - it an idea?
  
  public class UnlockWeblogicUser {}
  static MBeanServerConnection connection private;
  Connector of static JMXConnector private;
  Private static final service ObjectName;
  {public static
  try {}
  service =
  new ObjectName (com.bea:Name = DomainRuntimeService, Type = weblogic.management.mbeanservers.domainruntime.DomainRuntimeServiceMBean");
  } catch (MalformedObjectNameException e) {}
  System.out.println (e.getMessage ());
  throw new AssertionError (e.getMessage ());
  
  }
  }
  
  {} public boolean isUserLocked (String username)
  Ground of String = "";
  try {}
  ObjectName [] serverRT =
  (ObjectName []) connection.getAttribute (service,
  "ServerRuntimes");
  ObjectName = ssr
  (ObjectName) connection.getAttribute (serverRT [0], "ServerSecurityRuntime");
  MRR ObjectName =
  (ObjectName) connection.getAttribute (ssr, "DefaultRealmRuntime");
  Ulr = ObjectName
  (ObjectName) connection.getAttribute (MORR, "UserLockoutManagerRuntime");
  ground =
  Connection.Invoke (ulr, "isLockedOut", new Object() {username},
  New String() {"java.lang.String"}). toString();
  System.out.println ("Rezultat isUserLocked" + ground);
  
  } catch (MalformedURLException exc) {}
  System.out.println (Exc.getMessage ());
  } catch (IOException exc) {}
  System.out.println (Exc.getMessage ());
  } catch (Exception e) {}
  System.out.println (e.getMessage ());
  }
  System.out.println ("rezultatul" + ground);
  try {}
  Connector.Close ();
  } catch (MalformedURLException exc) {}
  System.out.println (Exc.getMessage ());
  } catch (IOException exc) {}
  System.out.println (Exc.getMessage ());
  } catch (Exception e) {}
  System.out.println (e.getMessage ());
  }
  If (rez.trim () .equals ("false")) {/ / System.out.println ("faaalse");}
  Returns false;
  } else {/ / System.out.println ("true");}
  Returns true;
  }
  }
  
  public public static void initConnection (String hostname, String portString,
  String username,
  String password) throws IOException,
  MalformedURLException {}
  String Protocol = 't3 ';
  Integer portInteger = Integer.valueOf (portString);
  int port = portInteger.intValue ();
  String jndiroot = "/jndi/";
  String mserver = "weblogic.management.mbeanservers.domainruntime";
  try {}
  JMXServiceURL serviceURL =
  new JMXServiceURL (Protocol, host name, port,
  jndiroot + mserver);
  H Hashtable = new Hashtable();
  h.put (Context.SECURITY_PRINCIPAL, username);
  h.put (Context.SECURITY_CREDENTIALS, password);
  h.put (JMXConnectorFactory.PROTOCOL_PROVIDER_PACKAGES,
  "weblogic.management.remote");
  Connector = JMXConnectorFactory.connect (serviceURL, h);
  connection = connector.getMBeanServerConnection ();
  System.out.println ("face conexiune");
  } catch (MalformedURLException exc) {}
  System.out.println (Exc.getMessage ());
  } catch (IOException exc) {}
  System.out.println (Exc.getMessage ());
  } catch (Exception e) {}
  System.out.println (e.getMessage ());
  }
  
  }
  
  On the host name, I set the ip address and port for the administration server. It seems that he make the link, because if I put another ip from clustered servers I get error.
  How can I solve this problem?
  
  I try even with ServerSecurityRuntimeMBean.isLockedOut
  ground = connection.invoke(ulr,_"ServerSecurityRuntimeMBean.isLockedOut",_new_Object[]_{username},_new_String[]_{"java.lang.String"}).toString ();
  because I read that is obsolete and has been replaced by this. On my localhost everything works fine, but when I deploy the application on weblogic 10.3.3 I get even only false results, that the user is locked out.

  You must connect to the server for the runtime domain administrator

  When you look at your code above

  ObjectName[] serverRT = (ObjectName[])connection.getAttribute(service,"ServerRuntimes");
  ObjectName ssr = (ObjectName)connection.getAttribute(serverRT[0], "ServerSecurityRuntime");
  ObjectName rrm = (ObjectName)connection.getAttribute(ssr, "DefaultRealmRuntime");
  ObjectName ulr = (ObjectName)connection.getAttribute(rrm, "UserLockoutManagerRuntime");
  

  The serverRT is an array of serverruntimes, here you get the right server. You can browse table
  and check, for example, the name of the server (note that at position 0 is usually the adminserver). When you have the right server you can use

  rez = connection.invoke(ulr, "isLockedOut", new Object[] { username },
  new String[] { "java.lang.String" }).toString();
  System.out.println("Rezultat isUserLocked " + rez);
  

  To check if the user is locked.

• performance tab - object refrence not set to an instance of an object

  Hi all

  freshly installed our VC server and all is well except the performance tab in the client interface to infrastructure.

  When you go to this tab on a couple of our guests we get"refrence not set to an instance of an object of the object", we also see the same error when you try to view the performance tab for virtual machines on a host that suppresses the error.

  tried rebooting vpxa and mgmt without change, services am thinking maybe remove the hosts of VC and add can solve but thought I'd see if anyone has a better solution, before you go try this

  ESX is 3.5 u3

  VC is 2.5.0 147633

  any suggestions appreciated

  Thank you

  Randy

  Yes, the journal of vc is found in: c:\Documents and Settings\All Users\Application Data\VMware\VMware VirtualCenter\Logs\vpxd.log

  -KjB

  VMware vExpert

• Two of the four hosts in cluster have a HA

  Aloha - sea. I had a unique SAN problem for resolution I had to reboot all hosts. The problem is now resolved, but after restart, on two of the four hosts, I a

  "HA agent on xxxx.yyyy.zzz clustered qqqqq has an error" error. Before restarting, HA has been upward and healthy. For now I'm off AP.

  Suggestions?

  Mahalo, Bill

  Hello

  Enable HA cluster, if guests have always problems host in the CR of the right-click and choose reconfigure for HA.

  Always had problems-> take a look in the logs and search the forum =)

• DataGuard archiving log not applied

  Hello
  
  I met archive log apply errors in the physical standby database. Below are the errors.
  
  
  
  SQL > SELECT SEQUENCE #, FIRST_TIME, NEXT_TIME, APPLIED from V$ ARCHIVED_LOG SEQUENCE ORDER #;
  
  SEQUENCE # FIRST_TIM NEXT_TIME APP
  ---------- --------- --------- ---
  10 24 AUGUST 11 NO. 24 AUG 11
  10 24 AUGUST 11 NO. 24 AUG 11
  11 AUGUST 24, 11 NO. 24 AUG 11
  12 24 AUGUST 11 NO. 25 AUG 11
  13 25 AUGUST 11 NO. 25 AUG 11
  14-25 AUGUST 11 NO. 25 AUG 11
  
  6 selected lines.
  
  SQL > select database_role, open_mode from v$ database;
  
  DATABASE_ROLE OPEN_MODE
  ---------------- ----------
  FIRST READING WRITING
  
  SQL > select message from v$ dataguard_status;
  
  
  ARCs: Started archiving
  CRAT: Started archiving
  CJACBR: become the "no FAL' ARCH
  CJACBR: become the "no SRL" ARCH
  ARCm: Become the heartbeat ARCH
  
  Message
  --------------------------------------------------------------------------------
  Again shipping customer logged in as PUBLIC
  -User is valid
  RFS [1]: assigned to the RFS 3389 process
  RFS [1]: do not use real application clusters
  LGWR: Error 16009 creation archivelog file "DBSOURCE.
  LNS: Impossible to archive log 3 thread 1 sequence 15 (16009)
  Again shipping customer logged in as PUBLIC
  -User is valid
  RFS [2]: assigned to the RFS 3393 process
  RFS [2]: do not use real application clusters
  FAL [server, ARCo]: error 16009 file creation remote archivelog 'DBSOURCE.
  
  Message
  --------------------------------------------------------------------------------
  Again shipping customer logged in as PUBLIC
  -User is valid
  RFS [3]: assigned to the RFS 3397 process
  RFS [3]: do not use real application clusters
  Heartbeat PING [ARCm]: Unable to connect to the eve "DBSOURCE. The error is 16009.
  Again shipping customer logged in as PUBLIC
  -User is valid
  RFS [4]: assigned to the RFS 3429 process
  RFS [4]: do not use real application clusters
  Heartbeat PING [ARCm]: Unable to connect to the eve "DBSOURCE. The error is 16009.
  
  54 selected lines.
  
  
  Of the primary alerts on DB log errors
  Using the default value for the parameter STANDBY_ARCHIVE_DEST as/u01/app/oracle/oradata/DBSOURCE
  Again shipping customer logged in as PUBLIC
  -User is valid
  RFS [1]: assigned to the RFS 3389 process
  RFS [1]: do not use real application clusters
  Errors in the /u01/app/oracle/diag/rdbms/dbsource/DBSOURCE/trace/DBSOURCE_rfs_3389.trc file:
  ORA-16009: destination of the journal archive remote must be a database of the EVE
  Game Aug 25 12:17:10 2011
  Errors in the /u01/app/oracle/diag/rdbms/dbsource/DBSOURCE/trace/DBSOURCE_lns1_3349.trc file:
  ORA-16009: destination of the journal archive remote must be a database of the EVE
  LGWR: Error 16009 creation archivelog file "DBSOURCE.
  LNS: Impossible to archive log 3 thread 1 sequence 15 (16009)
  Game Aug 25 12:17:30 2011
  Again shipping customer logged in as PUBLIC
  -User is valid
  RFS [2]: assigned to the RFS 3393 process
  RFS [2]: do not use real application clusters
  Errors in the /u01/app/oracle/diag/rdbms/dbsource/DBSOURCE/trace/DBSOURCE_rfs_3393.trc file:
  ORA-16009: destination of the journal archive remote must be a database of the EVE
  
  initDBSOURCE.ora params
  DB_NAME = DBSOURCE
  DB_UNIQUE_NAME = DBSOURCE
  LOG_ARCHIVE_CONFIG = 'DG_CONFIG = (DBSOURCE, DBTARGET)'
  LOG_ARCHIVE_DEST_1 =
  "LOCATION = / u01/app/oracle/oradata/DBSOURCE"
  VALID_FOR = (ALL_LOGFILES, ALL_ROLES)
  DB_UNIQUE_NAME = DBSOURCE'
  LOG_ARCHIVE_DEST_2 =
  "SERVICE = DBSOURCE LGWR ASYNC
  VALID_FOR = (ONLINE_LOGFILES, PRIMARY_ROLE)
  DB_UNIQUE_NAME = DBTARGET'
  LOG_ARCHIVE_DEST_STATE_1 = ENABLE
  LOG_ARCHIVE_DEST_STATE_2 = ENABLE
  REMOTE_LOGIN_PASSWORDFILE = EXCLUSIVE LOCK
  LOG_ARCHIVE_FORMAT=%t_%s_%r.arc
  LOG_ARCHIVE_MAX_PROCESSES = 30
  
  
  
  I have 1 more question. I copied all db files, control files, and archived logs of the remote db DBTARGET but with the standby control file I could mount the db in the remote server but the dbname is always DBSOURCE instead of DBTARGET.
  
  I tried running NEST to change on the site of relief the dbname but it errored out with
  Copyright (c) 1982, 2007, Oracle. All rights reserved.
  
  Connected to database DBSOURCE (DBID = 977273159)
  
  NEST-00131: control file is not current
  
  
  Change of database name failed during validation - database is intact.
  
  Could if apply the newspaper ceased due to the DBNAME is the same on the eve of primary and physical please help
  
  Edited by: 880215 August 25, 2011 10:02

  dbname is still DBSOURCE instead of DBTARGET
  

  The database must be DBSOURCE on both. It's the same data in two different roles, role PRINCIPAL and ROLE of the day BEFORE.

  Oracle, said by the DB_UNIQUE_NAME parameter.

  What I have is copy the control file before on the basis of pending data down and then copy and rename the control file that are there.

  Does make sense?

  I have some notes here if it helps:

  http://www.Visi.com/~mseberg/data_guard_on_oracle_11_step_by_step.html

  Best regards

  mseberg

• new oddities to 50.0.2

  Not a question, just a fact found. This week, FF, updated to 50.0.2. There is definitely something wrong with this version, can't put my finger on what it is... but here is an event for example. I belong to a group of investigation called ipsos. I go into my email and run investigations. This weekend I'm going in and EACH INVESTIGATION (remember, there are 15 of them, and at least 12 would respond to SOMETHING) comes back with an error saying: https://amp.ipsosinteractive.com/error?ec=1001&ci=&supplierId=&id=&pid=&uid=

  which means:

  We're sorry! This survey is no longer available. [1001]

  Then I go to the website of direct connection. He tells me that I have 12 investigations to do... Click on the links here... SAME THING. I have install 49.02. BAM, I can do investigations again... think FF wants to be restarted again to the 50.0.2. OK, we will restart. I can do a few surveys... then after the third one bam, I can't repeat ANY survey. The value FF NOT AUTO UPDATE. Reload again 49.02. BAM, once again, I can click the previous links that were denied and repeat surveys.

  Many issues of the site can be caused by corrupted cookies or cache. To try to solve these problems, the first step is to clear cookies and cache. Note: This will be you temporarily disconnect all sites, you're connected to. To clear the cache and cookies to do the following:

  1. Click on the menu button , choose historical and then 'clear recent history... ". ».
  2. Under "Time range to clear", select "all".
  3. Now, click the arrow next to details to toggle the active details list.
  4. In the list of details, see the Cache and Cookies and uncheck everything.
  5. Now click on the "Clear now" button

  More information can be found in the article remove the navigation, search and download history on Firefox .

  This solve your problems? Please report to us!

• Error during transfer of an array of Clusters for LabView

  Hello

  I'm new in LabView and I hope that this mistake has an easy solution.

  I built a VI to check the validity of a label.  The Vi receives an array of clusters.  The cluster has 3 strings.

  I built a Variable with an exact same structure in TestStand.

  I get the following error:

  Error, parameter 'Sn Range Array': array elements "FileGlobals.SN_Ranges" do not correspond to the LabVIEW or cluster cluster is disabled in the definition of the array element type. [Error code:-17313, could not accept the parameter passed.]

  
  Is attached a sequence with a single step.  and vi.  (the location of the vi must be re assigned to TestStand).

  Can anyone help solve this error?

  Thank you

  Rafi

  Thank you

  your advice was perfect...

  Concerning

  Rafi

• Convergence Assistant (error of the Op-Amp)

  Hi all

  This is my first post here, and I am familiar with Multisim on a basic level. I created my sim file based on a pattern that I was not designed. I get the error message:

  A simulation error occurred. You want to run the wizard of Convergence to try to resolve this problem automatically?

  Most every time I hit Yes, convergence assistant is able to solve the problem, but he is unable to fix this circuit. I think the problem is with the amplifiers and tried to tinker around to fix.

  I have included:

  1. JPG file sim
  2. Schema of the source GIF
  3. Multisim file

  Any ideas? Thank you.

  Moreover, it is a pulse width modulator used to keep the constant running rms.

  Hello

  I took a glance at your circuit, and it seems that the question of convergence is in the template that you use.  The model is a 3-terminal op amp; in other words, only the input and output pins are modeled and not the power supply.  This leads to problems of in your circuit in question because you have some operational amplifiers in open-loop configurations expected that output will be cut to supply voltages.  But because the power supplies are not modeled, the output is not be truncated, and so very great tension values produce outputs.

  I have replaced the template you are currently using in the circuit (ITI/LM324A) by another who does not model power supply (ITI/LM324A_2).  It seems that solved the issue of convergence.  The modified file is attached.  There are also specific models to the LM324 provider in the database in case you use a specific component of the seller (depending on your version of Multisim).

  Let us know if that fixes the problem.

• Error creating table with clusters

  Hello
  I tried the following

  CREATE CLUSTER emp_dept (deptno NUMBER(3))

  Cluster is created
  
  Then I tried to create the table with the cluster above but giving error:
  

  create table emp10 (ename char(5),deptno number(2) )cluster emp_dept(deptno);

  The error is:

  ORA-01753 column definition incompatible with clustered column definition

  Could you please help me in this

  Your cluster is based on a NUMBER data type (3), while the emp10 table has a deptno column with a data type of NUMBER (2).

• ADF library error on the server clusters remotely managed

  I wanted to set up 2 servers run on different PCs for clustering. For this purpose first I created 2 managed servers on my test domain that is on my PC1. Tested my ADF applications for each managed server (srv1 and srv2) on PC1. They spent. When I moved one of these servers to another PC (PC2) with the following commands below, orders said that succeeded him.
  
  on PC1:
  Pack - successful = true - domain = E:\Oracle\Middleware\user_projects\domains\test_domain-template=E:\Oracle\Middleware\user_template\TEST_DOMAIN.jar-template_name = 'TEST '.
  
  onPC2: (remote PC)
  Unpack - domain = test_domain-template=D:\oracle\Middleware\user_template\TEST_DOMAIN.jar
  
  After these steps, I started my servers on the command line by using the commands below:
  on PC1:
  srv1-http://localhost:7011 startManagedWebLogic.cmd
  on PC2: (Remote Server)
  startManagedWebLogic.cmd http://30.1.2.192:7011 srv2
  
  SRV1 changed its State to the mode of OPERATION easily, but srv2 state changed running with many errors which have been pointing that the ADF libraries and application could not be found.
  
  After errors on srv2, I removed the library targets srv2 using the screen of deployments of the administration console.
  Then I stopped srv2 and he started using the command line. It worked without any library and demand. There was no error.
  
  After these steps, I add srv2 libraries targets. When I tried to do, I confronted the below error message:
  
  
  
  An error occurred during activation of the changes, please see the log for more details.
  [Deployer: 149003] Cannot access the source information application in 'E:\Oracle\Middleware\oracle_common\modules\oracle.adf.model_11.1.1\adf.oracle.domain.ear' application 'adf.oracle.domain [LibSpecVersion = 1.0, LibImplVersion = 11.1.1.2.0]'. The specific error is: [Deployer: 149158] is no file application to 'E:\Oracle\Middleware\oracle_common\modules\oracle.adf.model_11.1.1\adf.oracle.domain.ear '...
  
  
  My applications are unable to operate without ADF libraries and I could not find a solution to the above error.
  
  Can someone help me on this topic

  Hello

  are you sure that *"E:\Oracle\Middleware\oracle_common\modules\oracle.adf.model_11.1.1\adf.oracle.domain.ear"* exists in the same location in * "srv2" * physical box as well?
  The Installation of WebLogic directory and the directory of the domain must be exactly the same to avoid similar problems.

  .
  .
  Thank you
  Jay SenSharma

• Error in < stateless-clustering > in weblogic-ejb-jar. XML

  Hello
  
  It is of my < weblogic-ejb-jar. XML > and I see an error in < stateless bean is clusterable >. Can someone help me please in this regard.
  
  <? XML version = "1.0" encoding = "UTF-8"? >
  
  < weblogic-ejb-jar xmlns = "http://www.bea.com/ns/weblogic/10.0" xmlns: xsi = "http://www.w3.org/2001/XMLSchema-instance" xsi: schemaLocation = "http://www.bea.com/ns/weblogic/10.0 http://www.bea.com/ns/weblogic/10.0/weblogic-ejb-jar.xsd" >
  < weblogic-company-bean >
  Sample1 < ejb-name > < / ejb-name >
  
  < stateless - session handle >
  
  < pool >
  < original-beans-in free-pool > 10 < / original-beans on free-pool >
  < / pool >
  
  < stateless-clustering >
  < stateless bean is clusterable > TRUE < / stateless-bean-is-clusterable >
  < / stateless-clustering >
  
  < / stateless-session handle >
  < / weblogic-company-bean >
  < weblogic-company-bean >
  Sample2 < ejb-name > < / ejb-name >
  
  < stateless - session handle >
  
  < pool >
  < original-beans-in free-pool > 10 < / original-beans on free-pool >
  < / pool >
  
  < stateless-clustering >
  < stateless bean is clusterable > TRUE < / stateless-bean-is-clusterable >
  < / stateless-clustering >
  
  < / stateless-session handle >
  < / weblogic-company-bean >
  < weblogic-company-bean >
  Sample3 < ejb-name > < / ejb-name >
  
  < stateless - session handle >
  
  < pool >
  < original-beans-in free-pool > 10 < / original-beans on free-pool >
  < / pool >
  
  < stateless-clustering >
  < stateless bean is clusterable > TRUE < / stateless-bean-is-clusterable >
  < / stateless-clustering >
  
  < / stateless-session handle >
  < / weblogic-company-bean >
  < / weblogic-ejb-jar >
  
  I use weblogic 10.3 and EJB 3.0 can I include all of the EJB in a single file < weblogic-ejb-jar. XML > file and what I can put in the EAR-> EarContent-> file META-INF, where files, application.xml and weblogic - application.xml.
  
  Basically, I'm trying to include < original-beans on free-swimming pool > and < stateless-bean-is-clusterable > for each of my EJB. Since there is no equivalent annotation for them in EJB 3.0, I had to include the file < weblogic-ejb-jar. XML >. I appreciate if anyone can suggest me if there is no equivalent annotation for the latter.
  
  Thank you
  Sowmya

  Hello
  1. Please try with real
  2. the EJB specification requires "the deployment descriptor must be stored under the name META-INF/ejb - jar.xml in the ejb - jar file." If you should not put the weblogic-ejb-jar. XML file META-INF of the EAR.
  3 has a default value as 'true'. you don't need it specify in your weblogic-ejb-jar. XML if you want to just have the value 'true '.
  4. default value for is 0. As you change the default, you will have to specify in weblogic-ejb - jar.Xml. If you can put all the EJB in a single ejb jar file, you can have only a single weblogic-ejb - jar.xml in the META-INF of the ejb jar file.

  Thank you
  Amy