ADF library error on the server clusters remotely managed

Similar Questions

• Hyper V 2012 R2 corrupt firewallrule the name of the server for Remote Dekstop

  Hello

  I have currently installed Hyper v server r2 2012 proposes to test, but I have a problem with all the firewall rules Dekstop remote to connect to the server using remote dekstop I am force to disable all the rules of profile to connect. I'm downloading a few screenshots with my system info and problems that I currently have. Note: It is in the Working Group and am remoting to Win pro 8.1

  Here is a list of things ot, I've done so far without result:

  Reinstall the Hyper V Server

  Reconstruction of firewall rule for the TCP-IN Remote Dekstop (the rule was added but once again with the corrupt name)

  Rewrite of USB and reinstalling the server (the USB key is written for the UEFI system partition and formatted Fat32 GTP)

  Reset the bios

  There isn't any other firewall except those on the server that the network connection is directly from a router and it is not any firewall avable here.

  PS because the screenshot shows am not able to activate remote dekstop rule for TCP-IN and UDP-IN because the names does not and I even used allow netfirewall rule the current name remote dekstop am still unable to connect to the only solution is to disable the firewall, but this isn't an option.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Server internal error - read the server has encountered an internal error or misconfiguration and was unable to complete your request.

  I get the following error message when you try to access one of my hotmail accounts:

  Internal Server Error - read the server has encountered an internal error or misconfiguration and was unable to respond to your request. Reference #3.269102cc.1330033628.4ef0aa7f.

  What is this error and how to fix it?

  Thanks Ellie

  I get the same message... must be a problem with hotmail.

• Sending ' reported an error (0x800CCC69): "the server responded: 550 IP address 78.150.58.218 in XBL'"

  Although I am able to receive emails Outlook 2007 will not send any emails and let this error message: sending ' reported an error (0x800CCC69): "the server responded: 550 IP address 78.150.58.218 in XBL'"

  Can anyone advise me as to why this is happening and how to put this right?

  Thank you for your support. The problem is solved mysteriously himself.  I'll keep your advice where I have the same problem in the future.

  Thank you very much

• Receive the error message "the server that you are connected using a security certificate that could not be verified that the certificate CN name does not match the passed value.

  Prob Winmail.

  Receive the error message "the server that you are connected using a security certificate that could not be verified that the certificate CN name does not match the passed value. Do you want to continue? ». This started happening after that my laptop has been reformatted. I have synced with Gmail winmail and followed the instructions to do this correctly. By pressing the tab 'Yes' allows me to use winmail, but it's a little embarrassing.

  Using a digital signature?  Check the settings under Tools | Options | Security and also tools | Accounts | Mail | Properties | Security.

  Also, see here (http://mail.google.com/support/bin/answer.py?hl=en&answer=86382) and make sure that your settings are correct.

  Steve

• Why I can't update my credit card payment information? It shows the error in the server. How can I make contact with the staff of Adobe?

  Why I can't update my credit card payment information? It shows the error in the server. How can I make contact with the staff of Adobe?

  Hi Purple % 20Lambs,

  Please contact Adobe support:Contact customer service

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

  In case you can't reach Adobe support, please see:

  Contact the technical support FAQ: Impossible to reach support via the link "contact us".

• Error offline - we are sorry, but there was a communication error with the server. Please try again and if the problem persists, contact Adobe Techincal Suport...  (INVALID_QUERY: XMLList object)?

  After a number of years of service, my Adobe Premiere CS4 gives me the following error message:

  Error offline - we are sorry, but there was a communication error with the server. Please try again and if the problem persists, contact Adobe Technical Support...  (INVALID_QUERY: XMLList object).

  I use this software on an old Dell desktop computer to two year with many members and drive.  It is a stand-alone application, not connected to a server.

  Anyone have any ideas on how to solve this problem?

  I think it has to do with the central resource is no longer supported.  Everything works OK if you ignore the message?

• Form error message 'the server encountered an error' Muse

  I downloaded a Web site using Muse, and I have problems with the form widget. I ran a diagnostic and all three are marked green, but when other people try to use it on a pc or phone, they get the error message "the server has encountered an error.

  What of weird is that some people have problems at all, and some are? I've updated the email address for the form to send to, to match the address of the site and its still does not.

  Please could you help, because I need it operational as soon as possible, as its RSVP form.

  Thank you

  Please note that the browser and version of the browser, device OS version device for someone who has received the error, so to see if there are any model.

  In general, this type of error is dependent only on the configuration of the server and is therefore almost always consistent regardless of the browser/device used to view the site.

  Are the visitors of your site, all from the same company? By default, forms of the Muse limit the number of submissions can be submitted to a single IP address in a short period of time in order to limit spam.

• communication error with the server. callback failed for the data entry page

  Hello
  
  We have recently applied the corrective update EMP on EMP 11.1.2.0 111.2.1.
  We have following the architecture,
  
  database server: sql server 2005
  Server Foundation (OS = windows server 2008): HSS, EPMA, Manager Calc, EAS, EIS, provider's server, planning
  Essbase Server (OS = windows server 2008): essbase
  
  After you apply the patching EMP 11.1.2.1, we apply after Electrodes for IE 9 compactibility i.e EMP 11.1.2.1.600 patches
  
  1. patch 14119724 (Workspace)
  2 14142678 patch (Shared services)
  3 patch 14224664 (EPMA)
  4 patch 14464109 (planning)
  
  After you apply above patches, all users get error when opening planning web form through the workspace of all client computer.
  
  "* error communication with the server. callback failed for the data entry page. "
  
  
  
  
  When restore us only planning patch 14464109 , issue of "communication error with the server. callback failed for the data entry page "get resolved for all users, but failed for a single user IE"user xyz" "
  
  the user xyz have OS = windows 7 and IE 8
  user xyz can take foundation server RDP can open any form of planning successfully in vain get when doing the basic machine.
  
  I have following question:
  1. Why do we get error "error communicating with the server. callback failed for the data entry page"after you apply the fixes to IE9
  
  2. after cancellation all patches or planning one patch, why the user xyz always get the error but not other users
  
  
  Thanks in advance
  
  Published by: 922755 on June 7, 2013 16:08

  It might be useful to have a read of the following doc Oracle Support - "error:"error Communication with the server. " "Callback failed for the data entry page" when you open a Web form of planning with the members of the Type of text [ID 1392689.1].

  And then this question should be resolved en.600

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• vCenter 4.1/ESXi 4.1 material status "Communication error with the server.

  I am slot that a brand new installation of vCenter with two new installs of ESXi 4.1 connected on it. I use on Dell PowerEdge 2950 s ESXi servers. I tired the customized version of Dell and vmware ESXi vanilla version. My host vCenter is Windows 2008 R2.

  In vCenter, the two server ESXi, any version of ESXi, I run, I get "Communication error with the server" error when I click the tab hardware state. No data appears in the hardware status tab.

  Only suggestion of Dell has been updated with firmware/BIOS on the server level. I did and it did not help.

  Anyone has any suggestions or ideas what would cause this?

  I had exactly the same problem what is to have everyone on this thread.  I finally called VMware support.  It is certainly a problem with Tomcat.  Apparently, during my initial installation of tomcat server vCenter (on a Win2k8R2 vanilla Server / unreleased) na not create a database file.  The vCenter Server uninstalled eventuall tech and went through the Setup again.  For some reason any Tomcat created db it's good the second time.  After installation, it takes about 5 minutes for the db should be created.

  On Windows 2k8R2 it is located here: C:\Program Files\VMware\Infrastructure\tomcat\lib\xhiveConfig\data

  The name of the comic is VcCache-by default-0. XhiveDatabase.DB

  My server didn't have one at all.  The relocation has created, at the beginning it is 0KB in size.  After 5 minutes, it grows up to 25, 600KB.

  Everything in my vCenter works now correctly.  I'm on 4.1.320137

  I hope this helps.

  Dave

• 500 internal Server Error on the server that is running Windows 2012 R2 and IIS 8.5

  Hello. We have a new server. On our old server, I used to get all debug information. Cold Fusion on my computer if something was wrong with a page of Cold Fusion. Now with the new server, all I get is a 500 internal server error. Is it because something is not properly configured on the server and debug information. Cold Fusion is not able to display? Anyone know what I should do to get Cold Fusion debugging information. to display? Here's what we all now:

  Our new server runs Windows Server R2 2012 and IIS 8.5

  ColdFusion Standard 11

  SQLEXPRESS 2008

  
  

  Thank you.

  Andy
  

  I have two settings enabled for my development environment, and it works for me. How about your IIS settings: you have detailed error messages that are enabled for local and remote applications?

• Using desktop remotely, I try to print on a printer different computers by the server and remote desktop. Does not

  With Server 2003, when you remotely connected with office, you could share your printers with everyone who has logged on to the server with the Office remotely and printed at the printing house they shared.  If the server had 10-12 different printers to that we could print.

  With 2012 the only printers that one session on the server is its own and the printers installed on the server.  We must be able to log in to the computer 1, with Imprimante1 and printing to the printer on computer 2, through desktop connection remote.

  Someone has suggestions I can see 2 printer who has logged the server with 1 computer?

  Oh, using the boxes of windows 7

  Todd

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• (2003 server) error 2019: the server was unable to allocate from the system non-paged pool because the pool was empty

  Hello

  I have a Windows 2003 server and get error (Server 2003) 2019: the server was unable to allocate from the system non-paged pool because the pool was empty.

  If anyone has encountered this error and has an instruction step by step to solve this problem please let me know.

  appreciate the help!

  Sincerely,

  Riaz

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• Update module intercepted error: 12007 the server name cannot be resolved

  AHI get dialogue when the computer starts windows 7 Professional update failure. The update module intercepts an error: the error code is 12007. The server name could not be resolved. Check that your internet connection is active and that no system of filtering or security is blocking the connection (Control Panel > Internet Options)

  I run a network home and the internet is connected but still this problem, I use Outlook 2003 Pro and have noticed desktop updtae KB907417 and ms outlook 2003 junk mail filter KB2466074 not sure if this the problem that all other windows update install, it may not update some aspects there are 3 files that will not update service of office 2003 pack 3 (sp3).

  Thank you 1 million in advance - too small Word uses IE8 32 bit as default browser

  Did cancel registration and re-register it, this seems to have solved the problem thanks for all your help

• Error message: "the server has failed", when you try to download "sp1aexpress_usa".

  Original title: "Server failed" when it tries to connect to / download "http://xpSP1.microsoft.com/isapi/pstream3.dll/xp/SP1.USA.1106a".

  I downloaded the file "sp1aexpress_usa", but when it works, I am getting error "Server failed" when it tries to connect to / download "http://xpSP1.microsoft.com/isapi/pstream3.dll/xp/SP1.USA.1106a".

  Hi JasonVigh,

  You can check the link for redownload SP1a and check if you can install it:

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=19751

  For more information, see the links:

  How to get Windows XP Service Pack 3 (SP3)

  http://Windows.Microsoft.com/en-us/Windows/downloads/service-packs

  You can also check the links of thread for more information:

  Impossible to connect sp1aexpress_usa.exe (Windows XP sp1a), get the error the server has not responded

  Failed to load Service Pack 1