CF10 and spreadsheets past CF9!

Similar Questions

• CF10 and IIS 7

  Hi all

  I have a strange problem here and in the hope of a solution.

  Previous install CF9 and IIS7.  To a lower level folder, I have activated Windows authentication.

  All I needed was the value of the auth_user.

  It worked well.

  I've now updated to CF10 and windows authentication no longer works.

  I saw the post of kevlar

  http://forums.Adobe.com/thread/1031711

  But no matter how many times I put these nothing happens.

  So right now I have both CF9 CF10 running so that I can test this.

  The CF9 site with windows auth set works while the CF10 we do not.

  Is there something in CF10 that blocks it?

  Concerning

  Ken

  Just in case something needs the answer to that.

  You must apply windows authentication in the virtual folder "jakarta" created by the installation of CF10.

  Concerning

  Ken Caldwell

• When I click on a link in a new tab is no longer open in Firefox. Now, I have to copy the link, manually open a tab and then paste the link. Simply, this started happening a few days ago and I haven't changed anything in my settings. Can anyone help?

  When I click on a link in a new tab is no longer open in Firefox. Now, I have to copy the link, manually open a tab and then paste the link. Simply, this started happening a few days ago and I haven't changed anything in my settings. Can anyone help? Thank you

  This problem may be caused by an extension that is not working properly.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode
  • https://support.Mozilla.com/kb/troubleshooting+extensions+and+themes

• Do you know how to copy certain tasks in the calendar and the past on different days?

  Do you know how to copy certain tasks in the calendar and the past on different days?

  This year, I even tasks to every month, so it is difficult for me to create new tasks for the same information. I can't find how to copy beyond the tasks, so if someone could help me I aprecciate it.

  Thanks in advance!

  Select, press COMMAND = C to copy it to the Clipboard; Select the date that you want a copy with the mouse, them press COMMAND\-V to paste. If you want a repetitive task, you can select the item and double-click it to open it, and then the pop up config, select repeat.

• Hello. I have this loose "a page need valid if we´re seen hiddeen BP. I had finished my work and went past it wrong! Please help me. Thank you very much

  Hello. I have this loose "a page need valid if we´re seen hiddeen BP. I had finished my work and went past it wrong! Please help me. Thank you very much!!!

  You have successfully updated to the 2015.1.2 Muse, published earlier this week? To force the update go to "help > updates...". »

• Hello. I bought Lightroom, paid license 1 year view, did not have serial. E number and then past the 30 day trial and may not use the product or work more hard. I paid has been deducted from my credit card. How I'm going to work now?

  Hello. I bought Lightroom, paid license 1 year view, did not have serial. And number and then past the 30 day trial and may not use the product or work more hard. I paid has been deducted from my credit card. How I'm going to work now?

  Hi Sergior96769872,

  I saw your Adobe ID (email address), you used to post on the forums, and I see an active subscription on it.

  Please see Help below links: { make sure you use the same Adobe ID (email address) that you used to purchase the subscription }

  Connect and disconnect activate Cloud Creative applications

  Adobe Creative Cloud apps back in test mode after 2015 set CC to update

  * NOTE: Make sure that your firewall of your computer or security software firewall does not block Adobe, if you are not sure of it can just disable the firewall for a while and then log off and log on creative application of cloud and check.

  If it still gives you an error of the trial, then please refer to the troubleshooting listed below:

  If you are using MAC:

  1-force Quit the sub process in the same sequence as shown below from Activity Monitor: see, use the monitor activity on your Mac - Apple Support

  • Creative cloud
  • Basic timing & sync to basic support
  • CC library & process CCX
  • Adobe Common Desktop
  • Adobe update daemon
  • Broker CIB Adobe
  • After that, everything that said adobe on it do a force quit for her

  2 - right click on the Finder icon, then select the "Go - To" folder. You will get a text box, type in the following command and then press the 'return '. ("Not to be missed ~ symbol")

  ~/Library (it will open the folder of the user's library.)

  3. browse to the Application Support > Adobe > trash OOBE folder and folder AAM Updater

  4 - CUT any installed security software with firewall system.

  5 - go to: Apple icon > system preferences > Security & Privacy > General > "allow applications downloaded on" change this anywhere (to make these changes click the padlock in the corner at the bottom left of this window and enter your computer password)

  These changes are temporary you can restore these changes back to normal once your creative cloud app is running *.

  6 - restart the cloud creative app and connect

  
  

  If you use the WINDOW:

  1 complete the process / Task Manager tasks in the same order, as mentioned below the Manager tasks. See, Open the Task Manager

  • Creative cloud
  • Basic timing & sync to basic support
  • CC library & process CCX
  • Adobe Common Desktop
  • Adobe update daemon
  • Broker CIB Adobe
  • After that, everything that said adobe on it do a force quit for her

  2 - C:\Users\\AppData\Local\Adobe\ MAA UPDATER and two OOBE (App data & Program Data is hidden folder please see, Show files and folders hidden in Windows 7, 8.x, 10, or Vista)

  3 - CUT any security software installed with firewall system, also if your having any browser Add On installed for blocking advertising that turn off too.

  These changes are temporary you can restore these changes back to normal once your creative cloud app is running *.

  4 - raise the cloud creative app and connect

  Let us know if that helps.

• Number of words and then pasting text into the text block

  I'm trying to create a javascript script that counts the words in a block of selected text, adds "WORDS." at the end and then paste at the beginning of this block of text with a "BOLD" character style applied. So he would look like:

  25 WORDS. Text text text text text. etc.

  I managed to find a way to create the character style, to count the words in the selected text block and give me an alert. But I'm not sure how to apply the character style and paste it at the beginning. Any help would be really appreciated. Here's what I have so far.

  Thank you

  -----------------------

  var curDoc = app.activeDocument;

  mySel var = app.selection [0];

  Create the style of wordcount

  If (! curDoc.characterStyles.item("wordcount").isValid) {}

  cStyle var = curDoc.characterStyles.add ({name: "wordcount"});

  }

  else {}

  cStyle var = curDoc.characterStyles.item ("wordcount");

  }

  cStyle.fontStyle = "Bold";

  //

  var mySelWords = mySel.texts.everyItem (). words.length;

  var mySelStoryWords = mySel.parentStory.words.length;

  Alert (mySelWords + "WORDS.");

  Hello

  further, through the selection, change the same way:

  var
       curDoc = app.activeDocument,
       mySel = app.selection,
       len = mySel.length,
       cStyle = curDoc.characterStyles.item("wordcount"),
       mySelWords, mString, curSel;
  
  if (!cStyle.isValid)
      cStyle = curDoc.characterStyles.add({name: "wordcount", fontStyle: "Bold"});
  
       while (len-->0) {
            curSel = mySel[len];
            if (curSel.hasOwnProperty ("insertionPoints") ) {
                 mySelWords = curSel.texts.everyItem().words.length,
                 mString = mySelWords + " Words. ";
                 curSel.insertionPoints[0].appliedCharacterStyle = cStyle;
                 curSel.insertionPoints[0].contents = mString;
                 }
            }
  

  Note that textFrame.words County is those visible only, so the other part of the text is excluded.

  If some of the answers have been useful - mark (their), pls ==> it's a good indicator for other researchers and a few points for me.., mlask.

  Jarek

• All my tabs are missing! Rename and copy/paste the files did not help

  I accidentally opened two windows of Firefox and closed one with all my tabs pinned first, then the second tab. After Firefox reload all my tabs are missing and I tried to rename files, copy and paste files, etc. as suggests these forums, but nothing has worked. I have myself screwed on?

  Check first the Menu history for any tab restore options.
  In the second place.
  If you have already restarted Firefox and have a copy of the files: close Firefox

  1. Open the profile folder profiles - where Firefox stores your bookmarks, passwords and other user data
  2. Save the previous.js recovery.bak and recovery.js under another name
  3. Place the recovery files in the profile folder.

  So that this does not happen again change your tab Preferences and settings or try Session Manager add and save your profile.

• Yahoo mail problem. Error Msg says low resolution and looped past. Resolution is set correctly and it is application of onlyyahoo that gives the problem.

  Loading the homepage of yahoo okay. The mail page works in chrome, but not in firefox. I checked the settings. Yahoo seems to define its own display options. Once the loading of the page mail it alternates between the error message and the Inbox in a loop.

  Everything is ok on chrome. It loads with the disolay fitting the screen unlike in firefox where the pages are wider than the screen. T

  You are welcome.

  Firefox is not automatically zoom in.
  
  You can have zoomed a page on this area by accident in the past by pressing the Ctrl key and scrolling with the wheel of the mouse or Ctrl and more (Ctrl + +) (Firefox remember zoom of page by area).

• help sites Web copy to the Clipboard, and then paste it on Facebook

  Hello...

  How can I copy and paste all the web pages I want to paste it into Facebook. In my Touchpad.

  When I click on the address of the Web site, at the top of the page, it, correctly, highlights the entire address, however, in the drop down menu, on the left, there is no option exemplary editing past etc.

  In addition, the only other way I found, is to try to send the link, then try to copy the link in the email send, however, that e-mail is the name of the web page text, providing a link to the page. So I can not stick to Facebook from the email.

  Am I mistaken.

  can I ask function to copy the web address to the Clipboard.

  Also is there an easy way to copy the web address on the Clipboard so you can paste facebook.

  Thank you. :-)

  Here's how:

  Press and hold on the link.  Depending on how long you hold that it can produce two results - for me, this usually points to the whole link then keyboard appears and the cursor go to the link.  Not a problem, now tap and hold your finger there until the bubble 'Select Select all stick them' opens.  Tap "select all" and the link has been copied to the Clipboard.  To where you want that it stuck and just hold your finger on the screen until the bubble even opens.  Choose 'Paste' and the link.

  From time to time, it works as it should - press and hold the link, it becomes yellow, tap again and the 'Copy' option bubble will appear.  I think that it depends on to know if the keyboard is displayed when you press the link.  Keyboard upwards and you touch & hold = "cut copy paste" dialog, keyboard facing downwards = the dialog box "select Select all paste them.

  HTH,

  WyreNut

• Pavilion dv7t 6100 - LM726AV: replacement of heat-sink/fan using the thermal pads and thermal paste/paste

  Hello

  The fan on my laptop died so I am trying to replace the fan and the heatsink unit. The manual that I use specifies that thermal grease should be used on the cpu and heat pads must be used on the graphics processor and the capacitors.

  The arrival of the new fan it came with heat pads on all relevant areas of the sink as a tube of thermal grease. When I removed the old fan, thermal pads have proved only on the capacitors and the components around the GPU and that thermal grease was used on the CPU and the GPU.

  My question is: how this part must be installed? Should I remove the fron pads thermal heat sink that covers the processor cpu and graphics and do not use the thermal grease in these areas? Or the thermal grease can be used here and let the thermal pads on the heat sink?

  Thanks for your help - thank you for the advice/opinions in this case.

  You can remove the protections and pass with the dough so but only f, you are sure that the metal on the core processor and graphic is in solid contact. And there, I meant it touches and also has a lower compression. For me, the thermal paste is superior coolant and should be used on really hot spots. However, if the metal is not full, solid contact you run the risk of overheating.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• When you copy work of a single document in Illustrator and then paste into a new document, some of the graphics change position outside the creation?

  This problem appeared in the last two months. My clients submit illustrations for the printing of labels and I copy their art on their original document and paste it into one of my models. Several times now, when I paste their art on the art Board in the new document, some of the graphics will be seen like they have changed and thumb or down and to the left. However, when you view the document in 'outline' mode, all of the graphics are actually properly positioned.

  Here's the kicker, in preview mode, if you directly select one of these wrong previewing objects and move, then immediately cancel this action and return to the "normal" display mode, all of a sudden it will preview correctly and the problem is solved. Its more than a boring bug than anything, but he throws a monkey wrench into my workflow from time to time.

  Preview bug seems to affect only segments of track line or forms with traits applied to them. It didn't happen with text or objects with fills only and it didn't happen with placed graphics.

  There is no relationship between this preview bug and the 'effects' applied to the objects. They are essentially just objects that can be displayed out of position until you move and then cancel this action.

  This started happening when I upgraded to Illustrator CC 2015.

  Also, I disabled because that literally turned my Mac Pro in a Ford Pinto so that isn't the cause GPU.

  All this experience?

  Keith,

  The issue should be resolved with the new patch/update, 19.1, that should solve known issues unresolved with 19.0.1.

  If she does not appear, disconnect and then reconnect the creative cloud application. After that, the 19.1 update must be visible in the creative application of Cloud.

  Default you can keep moving or scaling of the work affected (a little) and then Ctrl / Cmd + Z to undo, to get it in place.

  Or you can turn paste remembers layers in the layers panel, if you can live with the side effects.

  Returning to the CC 2014 will also rid you, of course.

• Find and replace pasta exhibitors

  I'm working on a report which has m3 [cubic metre] CO2 words like that. I copy paste formatted clues and words exposing Microsoft word and Indesign deleted these setting index in shape. How can I find and replace these errors with find and replace command? I already know how to do index and exponent, but I need a quick way to find and replace

  It does not work. I have to enter the word "index" in the box replace? I did only. "0 replacements made.

  Please explain in detail.

  

• Copy Doc1 and Doc2 paste

  Hi all

  Requirement:

  My requirement is to copy all the Source Document pageitem (doc1) and paste in the target Document (doc2).

  [Note: doc1 contains many pages]

  Try the Code:

  He's going Ist page only. Not repeated for next process.

  var doc1 = app.documents [0];

  var doc2 = app.documents [1];

  for (i = 0; i < doc1.pages.length; i ++)

  {

  myPages var = Pages [i]

  Alert (pages [i])

  Doc1.pages [i].pageItems.everyItem (). Select (SelectionOptions.ADD_TO);

  App.Copy ();

  app.activeDocument = doc2;

  app.pasteInPlace ();

  }

  Please check and advise.

  Thanks in advance

  BEGINNER

  Try something like this:

  var doc1 = app.documents [0];

  var doc2 = app.documents [1];

  for (i = 0; i

  {

  If (doc2.pages.length<>

  Doc2.pages.Add ();

  }

  Alert (pages [i])

  Doc1.pages [i].pageItems.everyItem (). Duplicate (Doc2.pages [i]);

  }

• Custom objects: current date and spreadsheet

  On another normally functioning form, there are two custom objects, the two fields of current Date, appearing not at all

  When I merge data files into spreadsheet in Acrobat X Pro. The two fields have the value calculated reading alone and execution property

  current Date/time. Is it possible to include the value of current Date/time when the file is merged into a spreadsheet, maybe

  with the script editor? And why not a current Date field is displayed in a spreadsheet?

  Hello

  Once the binding of an object is name / Normal, then it should participate in the export to the worksheet. If you drag an object CurrentDate, she taps into the custom; Select it and go to object > liaison palette, you will see that the link is set to None / N ° of data binding.

  If you want an object to export, you must set the binding.

  Niall