Satellite U400-14 b turns off and now it won't start
Hello
just got a new Satellite U400 this week.
Worked perfectly the first days, and then last night, it just turns off and now it won't start.
I press the button and the row of lights beside him light up, but nothing happens that I n t even get as much as the Toshiba screen.
I tried a lot of things. I left it plugged in all night, tried to take the battery and any results now.
Little led lights on the bottom indicates that it is his stuffy, battery is white not orange when you press they light up only for a fraction of a second.
The only thing I can compare it is too when a car won t start and you keep turning and turning the key, well in that case, pushing a button, and nothing happens, fans don t whir or anything...
help please...
Additional memory (RAM) has been installed? Try to remove a memory Module and try another memory location.
If bad memory is not the problem, then there is not much else you can do except send it to an ASP for warranty repairs.
Tags: Toshiba
Similar Questions
-
Windows Update no longer works and my computer is extremely slow so
Hello
1. have you made changes on the computer recently?
There is a possibility that another application is at the origin of the conflict with Internet Explorer. Let us check in safe mode with network and then we can check in clean boot to find the root cause of the problem.Step A.
Please check if you are facing the same question when working in mode safe mode with networking.
a. restart your computer.
b. when the computer starts, you will see your computer hardware are listed. When you see this information tap the F8 on your keyboard key repeatedly until you are presented with the screen Windows Vista Advanced Boot Options.
c. using the arrow keys, select the desired option of Mode without failure.
d. press the Enter key on your keyboard to boot mode safe mode of Windows Vista with networking.
e. when Windows starts, use check and Internet explore if the problem persists.
For more information, refer to the article below.
Troubleshooting in safe mode
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshooting-problems-while-in-safe-modeStep B.
If the problem exists not in Mode safe run mode startup minimum troubleshooting to find the root cause of the problem.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.I hope this helps. -
I made a disk defrag on the guest computer and now VM won't start
Hi, I stupidly done a disk defrag on the guest computer and now VM won't start. I have attached the log files you. Please help me.
Post edited by: a.p. - the moderator Note: branched out in a new discussion
This can make things more difficult depending on the current state of the virtual machine.
What you should do at this point - unless already done--is to backup/copy of files of all VM to ensure that you have a way to go back if things don't work as expected. The next step is to find out if it is possible to free up space on the D: drive, so that the virtual machine does not have to be moved (move the files could be unnecessary snapshots). If there is enough free space on the disk, use the file attached configuration (.vmx) to replace the damaged one. Ensure that VMware Workstation or at least tab of the virtual machine is closed when you do this to ensure that the replaced .vmx file is reread. If things work with the replaced files, consider deleting snapshots that you no longer need. This will not release disk space only, but can also improve the performance of the virtual machine.
André
-
Re: Satellite U400: how to turn off the number lock by default
Hello
Is it possible to remove the NumLock (Fn F11) that is activated by defalut on my Satellite U400?
Thanks in advance
Hello
What? I have a u400 and numlock is not enabled.
However, you can disable this by using the FN + F11 key combinationWelcome them
-
My KDSR70XBR2 turned off and now only red light blinks six times then pause of 2 seconds followed
TV off last night and gave a warning of the temperature. I turn it off, put a fan behind it, but it still blinks six times then 2 second pause followed by six flashes and pause. I did that for about 18 hours now.
Help, please.
The x 6 times standby light flashing indicates that the device has a power problem and may require services. To find an authorized service of Sony to your TV in your area go to:
https://eService.Sony.com/webrma/Web/index.do
Nathan_SD
-
Satellite L350D - 12 M - BSOD and now it won't start up
Hi all
I use my Satellite L350D almost everyday with no problems (it is around the age of 18 months). I left it over the weekend and when I got home I started it upwards and once everything was loaded I got the dreaded blue screen of death. I restarted my computer, but it is simply a noise whirring while the screen is off. I tried to leave message to see if the screen lights up, but apparently not.
When I started it again after leaving it from one day to the next I got to a screen where it says I pourrais either press F2 or F12 (I think), but the keyboard was not record the fact that I was pushing the keys.
Any thoughts?
Hello
Just a simple question: have you tried an external monitor on the laptop? Maybe the display internal doesn t work properly.
Check this box!However, in your case, I will try to remove the battery and the AC adapter. Wait an hour and then reconnect the two devices. Now, you should try to restart the laptop.
In the worst case, it s a hardware problem and you need professional help :(authorized service provider
-
Ramdomly PC turns off and restarts. Won't do in Mode without failure.
Hello. FO; lks!
I saw similar posts, but nothing exactly like this one.
My PC randonly shut dow and start times ranging from 1 minute to 20-30 minutes. The frequency seems to be getting shorter. The PC will apparently still be Mode without failure.
I tried to remove recently installed software and do a system restore.
When I originally started to have this problem, I am running Vista Ultimate. After trying my limited number of tricks, I took the device to the local computer repair company. At first, they thought it was a problem of overheating but memory, power and MoBo all checked. When I told them to let it run a few days in safe mode, they said it should be the software, so they upgraded me to to Windows 7. This does not solve the problem.
By reading this forum, I saw the mention of the verification of the file running. I did and all I get now is BSOD.
My system is: 2.67ghz i7 processor of Intell, ASUS MoBo, 6 GB of RAM and a 1 TB hard drive and a DVD burner.
I copied some of the most recent event logs to Word.
Any help appreciated.
Hello
Could be heat related - try using a small fan to blow into the air intakes to see if that helps.
Clean the dustbunnies by ports. It works better in Mode safe mode because the system
is not as pointed, especially the video. Therefore, the system is probably overheating or heat
the sensors are too sensitive, or both.To be able to remove ALL and reinstall all the cables (both ends), card and memory - in fact remove and
replace - do not just tight. (Of course these are for a PC and not a laptop).This sounds like material so if the above does not help you then probably need the help of a
real computer store (not of leeks and glances at a Best Buy or other department stores) or the system
Support from the manufacturer.===========================================================
Check this thread for more information on using BlueScreenView, MyEventViewer and other methods of
Troubleshoot the BlueScreens - top 3 methods. Be sure to look to the top of each Bug_Check to FaultWire.------------
Check out these utilities to see if information may be collected:
It is an excellent tool for displaying the blue screen error information
-Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
and displays information about all accidents of a table.
http://www.NirSoft.NET/utils/blue_screen_view.html-------------
MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or so of the
time of the BSOD to provide more information about the possible cause - see TIP.MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
Set it for a bit before and after the time of the BSOD.
http://www.NirSoft.NET/utils/my_event_viewer.html------------
AppCrashView - free - a small utility for Windows Vista and Windows 7 that displays the details of all the
application goes down has occurred in your system. The information breaks down is extracted from the .wer
the files created by the Windows Error Reporting (WER) of the operating system component of each
time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
text/html/csv/xml file.
http://www.NirSoft.NET/utils/app_crash_view.html------------------------------
Also do this so you can see the probable bluescreens. (You may or may not be able to see
them if they occur even after doing this according to the cause.)Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
http://www.winvistatips.com/disable-automatic-restart-T84.html=========================================
What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).I hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
I have tried to re - install and reboot my computer - and am in range for customer care - but it doesn't start at all.
first of all, disconnect, then back to your application of cc and retry the update, http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
If this fails, close your cc app and then re-open and retry the update.
If this fails, restart the computer, log out and then back and update.
If this fails,
Delete the file OPM.db and reconnection in the desktop application of creative cloud using the Adobe ID associated with your subscription.
Mac OS: You can locate the file OPM.db in the \User\
\Library\Application Support\Adobe\OOBE folder. To access the hidden user library folder, see library user access hidden files. Mac OS 10.7 Lion. Windows: You can locate the file OPM.db in the \Users\
\AppData\Local\Adobe\OOBE folder. To show the hidden AppData folder, see view files, folders, file name extensions. Windows XP, Vista, Windows 7. -
Satellite Pro A60 has just turned off and won't come back
My Satellite A60 laptop just turned off and will not go there is nothing no sound no lights nothing.it ran on sector when it happened.
any help apreciated
Hello, Heidi
Remove the battery, connect your laptop adapter only and try starting your laptop running. When the laptop boot and OS is fully loaded, wait a few minutes and reinsert the battery.
If everything is OK look carefully if the battery will be charged correctly and when battery LED is green (fully charged battery) try to turn off your laptop as usual. Turn it back on and carefully monitor what is happening exactly.
-
Time Capsule A1355 no light, no sound? worked this morning now after connecting it, first green light solid, quickly followed by amber is more solid, which turns off and then nothing? I'm not in the airport or if directly connected to the Macbook air utility. It is running the latest firmware, updated 7 days ago and everything was fine until now. Tried both a soft and a hard reset factory but still nothing, but the same brief glow only after restarting each time before going dark again? Any ideas if it can be fixed or if it's as I read elsewhere dead now?
Thank you
Any ideas if it can be fixed or if it's as I read elsewhere dead now?
He died... the fact that the main witness turns off is unusual in this model.
It is common to the next... A1409 (gen4)
What happens in the Gen3 is normally a few deaths on the Board... or a bunch of capacitors is low...
If yours is a very fine introduces Gen3 just before Gen 4, it is possible that the same fix on the Gen 4 could work.
I found early Gen4 may fail as Gen3 but must admit that I am yet to see the Gen3 with welding problems.
I doubt repair is worth it. The Gen3 is now about 6 years... give or take... This is way beyond the standard lifetime of a TC.
If you want to play, I'm happy to help you... but I would not spend money on it.
-
Had cracked screen but the phone works still. Today screen is become white, and the phone rang again. Did hard reset and now the phone is completely turned off and will not be exposed - not even the Red of the battery is displayed
He broke. Make an appointment at the genius bar and get it fixed / replaced. There is no magic words that will do well.
-
The battery will be discharged when my Satellite L670 is turned off and unplugged
I have the Satellite L670-1john 3 months.
the battery will discharge when the PC is turned off and unplugged.
How to solve the problem?
> the battery will discharge when the PC is turned off and unplugged.
How to understand this?
Does it means 24 hours battery is completely discharged or what?Battery loses power when the laptop is turned OFF and unplugged and there is nothing unusual.
Enter the BIOS settings and disable Wake up on LAN.After doing this watch carefully what will happen and let us know if the battery will discharge both than before.
-
iOS block report because of the third-party application, I answered and they managed remotely on the computer, now I know it's a scam, I turned off and reset the password, I'm in the clear?
If you allowed anyone remote access to your computer (and you're talking about a computer since you mentioned iOS which is the OS for iDevices; computers run on Mac OS X), while no one knows what they were able to install. Assume the worst and:
Notify your credit card company / bank of potential fraud
Change your bank accounts and report your fly/fraud credit card
Change all of your passwords
And, finally, erase your entire hard drive and reinstall the OS from scratch using recovery or your original installation disks.
-
Satellite A200-1FL randomly turns off
Hello
I have the problem that after I moved from the Spain to the Thailand now my Toshiba Satellite A200-1FL randomly turns off.
This only seems to happen when it is connected with AC - with battery I have it is not happened again although I can't rule out it.After some time of work (sometimes only 10 minutes, sometimes up to 2 hours) the laptop just shuts off-as if I would unplug the unit without the battery inserted. It is certainly not an overheating problem because the CPU is at 55º c most of the time (a year before the cpu fan was dirty and he has sometimes increased to 90º - but which caused no stops).
I don't know about electricity here in Thailand - but it seems 220V and they do not use the Earth (at least at the point where I am).
I use the original Toshiba AC adapter.What could be the problem here - is there any solution or the solution to this problem?
Thanks for any help,
vitaminxHey,.
As stone I n not know electricity of the Spain and Thailand, but if you have only this problem with the AC adapter / CC, there are a few differences between the Spain and the Thailand.
In your case, I will ask the local authorized maintainer in Thailand. For example just give them a call and ask a technician for help. I'm pretty sure, they can give you an answer if you need a new power supply or another outlet.
Good luck! :)
-
Satellite A30 - portable computer turns off
Hello
Ive hada satellite a30 for about 2 years now.
A few weeks ago, I reformatted the laptop and now whenever I watch a DVD after that 30 minutes, the laptop turns off and then used charging for a while.
In my view, it is an overheating problem but im not sure what is causing it or how to fix it.
Anyone has any suggestions would be accepted greatifully.
Sincere greetings
MyHello
Well, of course, it could be an overheating problem. If the temperature drops to the critical limit for the operating system stops the unit. It is a thermal protection of the portable Toshiba.
Well, the overheating problem is a very serious problem. I recommend to check for dust cooling fans. Try to clean it with the vacuum cleaner.Good bye
Maybe you are looking for
-
Best VPN for Mac Office-based network protocol Option
I do research of the solutions for the installation of a VPN to a position of up to 15 stations for a customer. All stations are pimps and El Capitan OS X running. I will implement a router Cisco VPN rv130. I am to decide what the Protocol would be
-
Windows installs 3/3 stakes to date "do not turn off your computer.
Originl title: Windows Vista updates My laptop does not restart after a recent windows update. All I get is a screen saying "can I install 3 of 3 updates" do not turn off your computer. When it is made 100% it tells me that it restarts. When that hap
-
I have administrator privileges, but when I run CHKDSK it says access denied due to insufficient privileges. You have to invoke this utility in elevated mode. How can I fix it?
-
SystemPrompt input type do only digital
Hi all I want SystemPrompt keyboard of only digital input field. By default it gives alphanumeric. How do I change this? Please help me. Thank you & best regards Sanjit
-
BlackBerry Smartphones Google Sync
Hello A few months ago, I downloaded the Google Sync application in order to synchronyze my Blackberry calendar with that of Gmail. Everything worked perfectly when the application stopped working a few weeks previously. Since then, I have a message