CF9 Windows 7 (32-bit) Setup Wizard Timeout

Similar Questions

• Photosmart C4795 on Windows 7 64 bit Setup error

  Dear experts,

  I was faced with a boring issue while installing HP Photosmart C4700 all-in-One Printer series full feature software and driver recently I donwloaded the HP Web site.

  During installation, the window suddenly closes when the' updates'. No error message or anything that might tell us what has gone wrong, it disappears from my screen.

  I found the post following with exactly the problem as mine but produces different. I tried this solution but it does not work for me: http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/hp-photosmart-plus-b209a-m-driver-inst...

  I hope someone can give me a tip because I'm really out of options here.

  I appreciate all help.

  Thank you
  Ricardo

  Hello Ricardo,

  Rental try, proceed as follows and let me know the results:

  • Start the installation and follow the steps until the display of EULA (license agreement).
  • Click on the link 2 - using the Internet connection settings and select No, thank you for both of these questions.
  • Confirm the selection, to accept the EULA and continue with the installation which should no\w go further.

  Plese I want to know if this is useful,

  Shlomi

• version 2.0 SlingPlayer Setup Wizard appears incompatible with Windows Vista

  Setup in Windows 2.0 Wizard Slingplayer seem incompatible with Windows Vista (it is compatible with Windows XP) after Slingplayer 2.0

  opens, nothing appears in the installation wizard when you click it.

  Hello

  Welcome to the Microsoft community. I see that you have some problems with the slingplayer version 2.0 Setup Wizard. I'll help you with this problem.

  1. What is the brand and model of the computer?

  2. you have a 32-bit version or the 64 bit version of windows?

  3. have you made changes on the computer recently?

  Minimum requirements for SlingPlayer 2.0 for Windows: http://support.slingbox.com/get/KB-1000076.html

  Method 1.

  You can run the program in compatibility mode and check if that helps.

  Make older programs run in this version of Windows: http://windows.microsoft.com/en-US/windows-vista/Make-older-programs-run-in-this-version-of-Windows

  Method 2.

  A clean boot to test if any element of service or third party application startup is causing this issue.

  How to troubleshoot a problem by performing a boot in Windows Vista or Windows 7:http://support.microsoft.com/kb/929135

  Note: Once you have finished troubleshooting, follow step 3 in the article to start on normal startup.

  Additional information.

  SlingPlayer for Windows (legacy desktop version): http://support.slingbox.com/go/slingplayer-windows

  I hope this helps.

• I'm trying to connect 2 through a router (network) computers. The Network Setup Wizard tells me to insert my Windows XP CD, but I can't.

  Configure the connection without my Windows XP CD?

  
  

  I'm trying to connect 2 through a router (network) computers. The Network Setup Wizard tells me to insert my Windows XP CD, but I can't. Is there something that I can get online? What should I do?

  Hi Humphrey2,

  I suggest you arrange for an installation CD of Windows XP which may be necessary to copy the files to configure the network connection.

  You can follow these links and check if the problem persists:

  In Windows network connection issues

  How to troubleshoot a network home in Windows XP?

  
  Reference: Overview of the Network Setup Wizard

  Hope the helps of information.

• Transform Windows XP & Settings Transfer Wizard of files for Windows 7-64 bit?

  I did a back up and run the Transfer Wizard - settings & Windows XP file THEN I discovered on the Windows 7 transfer Assistant.  So I ran this program.  Somewhere in update XP to Windows 7, Win 7 thought my backup disk was altered and basically remapped and "recovered" all files/lines lost - even if there is nothing wrong the drive.  The file transfer Wizard Windows 7 was "recovered" with 0 bytes.

  I still have the download Windows XP UNC file.  Is it possible to convert this program or import this program for recover my settings in Windows 7 64 bit?

  Hi Johncon,

  Thanks for posting. There are third-party applications available that can help you with this. Also call 1-800-Microsoft can help because they have a tool as well.

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  I hope this helps!
  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• I installed Windows 7 (64-bit) on my HP laptop. When I open a wizard, the point of the mouse frequently goes to the office.

  Hello

  I installed Windows 7 (64-bit) on my HP laptop. When I open a wizard, the point of the mouse frequently goes to the office.

  Example: If I type a URL in Internet Explorer the mouse point is for place in rear window (desktop) and I need to click on the URL bar to continue writing. It's frustrating to work.

  My first level of troubleshooting:

  Re-1 display drivers).

  (2) connected in safe mode and watched 5 minutes and has not seen the question. Seems the problem occurring in normal mode only.

  Thank you

  Vicky

  Hi Niranjan,

  Thanks for your reply. I tried some troubleshooting steps today morning and find the root cause of the problem.

  The problem with the driver for keyboard and mouse, so I uninsatlled form the machine. After the reboot, the problem disappeared, but my point of the mouse works slowly in any case I'm looking for the latest driver :)

  Thank you

  Vicky

• CF9 Windows switch from 32 to 64 bit license?

  I've seen some previous, old, comments on this subject, but most were specific to special editions (trial, edu, etc.) of the CF.

  I will be upgrading the server currently running CF9 of 32-bit Windows to 64-bit Windows.  Therefore, it makes sense to put a 64-bit version of CF on it as well.

  I think that the CF9 32 bits that is currently running on this server * could * be a version upgrade.

  Can I download the CF9 64-bit distribution and install it on the 64-bit Windows after the upgrade and use the same serial number that I am currently using?  Or I have to buy something to make this happen?

  Thank you

  -reed

  Yes, you can use your existing license. There is no separate license for versions 32 bit 64 bit vs.

  Dave Watts, CTO, Fig Leaf Software

  http://www.figleaf.com/

  http://training.figleaf.com/

• Setup error 12.2.1.0.0 forms and reports in windows 7 64 bit

  I try to install 12.2.1 forms and reports, but get the following error message when you select an Oracle Home.

  INST-07548: distribution selected only has not any type of compatible installation for the selected Oracle home.

  • INST-07548: distribution selected only has not any type of compatible installation for the selected Oracle home.
  • INST-07551: not all sets of dependent features to install type "Deployment of forms and reports" could be found. The following prerequisites proved to be missing: em_fmc - 12.2.1.0.0

  I installed 12.2.1 WLS production and the development of versions on a windows 7 64 bit machine and get the same error message against each Oracle home.

  Java 1.8.60 is the version of java installed.

  Ideas?

  It seems that you have downloaded and installed the maldistribution of WLS.  You must use the 'Infrastructure' distribution, which can be downloaded here:

  http://www.Oracle.com/technetwork/developer-tools/forms/downloads

• PowerPrep application is not compatible with Windows Vista 64-bit

  I am currently studying for the GRE and the website includes a study great tool/application called PowerPrep or something like that. I downloaded it and it says it is compatible with Windows Vista 32-bit, I have a Toshiba Satellite running Vista 64-bit and when I go to start a program I get the error message "the version of this file is not compatible with the version of windows you are running check system information from your computer to see if you need a x 86 (32 bit) or x 64 (64-bit) version of the program" is anyway to run the program with my computer. I thought that 64-bit is technically compatible with 32 - bit, but I don't know much about computers. Any help would be greatly appreciated.

  Hello

  "Most programs designed for 32-bit version of Windows works on the 64 bit version of Windows. The notable exceptions are many antivirus programs.

  Device drivers designed for 32-bit versions of Windows do not work on computers running a 64-bit version of Windows. »

  always check the compatibility of vista programs on the link below

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  If a program is compatible with vista you can try right click on the setup.exe, and then selecting run as administrator

  It is not compatible with vista, you can try running it in a previous operating system mode

  This does not work for all programs

  read the information below

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  ____________________________________________________________

  and read this information MS, too

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-the-program-compatibility-Wizard

• How can I convert a true 32-bit windows 7 64 - bit windows 7?

  I bought lenovo laptop with windows 7 last 6 months before, but at the time of purchase I didn't was not a 64 bit OS. I later found out it's 32-bit operating system. My setup is processor Intel i5 with 4 GB of RAM. Due to the 32 bit OS, I am unable to use lots of RAM (usable RAM is 2.99 GB).
  Is there any change the 32-bit windows 7 OS for windows 7 64 bit OS.

  Please let me know if this is possible. Waiting for your response.

  You will need to contact Lenovo and request a set of 64-bit recovery disc, they could practice small shipping and handling.

  You will need to do a clean install, there is no place on the way to upgrade Windows 7 32 bit to 64 bit.

  Using the disk of 64-bit Windows 7, install Windows 7 Windows Easy Transfer Utility from the DVD (to find it, simply navigate to x:\support\migwiz, "x:" is the name of your hard drive. (In this case, you will see a collection of files, the important"that you must search for and double-click is 'migsetup'.) run it and create a DAMP (Windows Easy Transfer file), if you have an external hard drive, you can access it later when you perform a clean install of Windows 7 64-bit disk so you can stored there.

  Once you have done this, just do a clean install of Windows 7 64 bit disc. In Windows 7 64 bit disk, start Windows Easy Transfer, follow the wizard screen, tap on which is stored the WET file (external hard drive) and it will restore your personal files and settings. Reinstall the applications needed.

  http://www.notebooks.com/2009/10/07/using-Windows-easy-transfer-in-Windows-7/

  Lenovo:

  http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-4HWSE3

  If Lenovo is unable to provide a set of 64-bit recovery disc, you simply buy a retail upgrade license and use.

  Update of prices:

  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Windows_Upgrade_Matrix

  64 bit 32 vs

  http://Windows.Microsoft.com/en-us/Windows7/32-bit-and-64-bit-Windows-frequently-asked-questions

  My PC running the 32-bit version or 64-bit Windows?

  http://Windows.Microsoft.com/en-us/Windows7/find-out-32-or-64-bit

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  Windows 7 64 bit comes in handy when you need to deal with at least 4 GB of RAM or more. Windows 7 32 bit can use up to 3.2 GB of RAM. Because the address space of memory is much larger for 64-bit Windows, this means that you need two times more memory than the 32-bit Windows to accomplish some of the same task, but you are able to do much more, you can have more apps open, do things like run a virus scan in the background it will affect the performance of your system. 64-bit Windows 7 is safer too, malicious code cannot easily infiltrate it, drivers are more reliable because they must be signed before it can work with 64 bit Windows 7.

  Regarding compatibility, you need device drivers 64-bit hardware devices, you may have. In addition, there is no 16-bit subsystem in Windows 7 64-bit, which means, your applications must be 32-bit only, not 16-bit Installer or programs uninstaller.

• HP Photosmart C7280 solutions Center does not work after Windows 7 32 bit upgrade

  I recently updated my operating system from Windows Vista to Windows 7 (32 bit).  Before the upgrade, my C7280 worked fine using the center of Solution and in my home wireless network.  After the upgrade to Windows 7 and download and install PS_AIO_02_Net_Full_Win_WW_130_140.exe, version 13.1.0, Solution Center does not work.

  At the opening of the solution Center, it displays disconnected printer.  Using the Wireless Setup Wizard, the printer connects to the network.  I can open the Solution Center and it works very well for about 3 seconds and then goes to the printer disconnected mode.

  I uninstalled and reinstalled the software update for Windows 7 package C7280 repeatedly and with the same results.  I downloaded and installed the patches and still no change.

  I finally had to restore my computer to original operating system.  After the computer back to its original configuration, I used the original to HP Photosmart printer disk to reinstall the driver for Windows Vista.  Everything worked as before.  Then I ran the Windows 7 Upgrade Advisor.  Yet once, he told me that the HP Photosmart C7280 printer was not compatible with Windows 7.  I uninstalled the printer driver and run Windows 7 upgrade advisor.  This time, I have not received any message about the C7280 printer.

  I installed upgrading to Windows 7 (32-bit), and then upgrade the HP Photosmart C7280 for Windows 7 32-bit driver.  Everything works fine now.

• ORA-12546 TNS Permission denied-base data Setup Wizard

  Hello!
  I just installed the database from Oracle 10.1.0 on my system at home. The installation went well, and other configuration assistants have also done their job, the problem started during the database Setup Wizard. After putting in and set up the required details to make a database, I clicked on the button "Finish". At the moment where the creative process has started a pop up appears saying "ORA-12546 TNS Permission Denied" asking me to ignore or abandon.
  
  I tried to run SQL * Plus with the username password - System/Manager, but he gave the AMT Protocol adapter error.
  
  Can someone please advise me what to do? I have a Windows 7 32-bit PC named - Shikhar-PC. The content of the listener. ORA and tnsnames. ORA is as follows:
  
  Listener.ora*.
  
  SID_LIST_LISTENER =
  (SID_LIST =
  (SID_DESC =
  (SID_NAME = PLSExtProc)
  (ORACLE_HOME = D:\oracle\product\10.1.0\db_1)
  (= Extproc PROGRAM)
  )
  )
  
  LISTENER =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC))
  )
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = TCP) (HOST = Shikhar-PC)(PORT = 1521))
  )
  )
  )
  
  TNSNames.ora_
  
  
  EXTPROC_CONNECTION_DATA =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC))
  )
  (CONNECT_DATA =
  (SID = PLSExtProc)
  (PRESENTATION = RO)
  )
  )
  
  Any help would be appreciated! And by the way that I am a newbie so please carry me!
  
  Thank you.

  10gR 1 has never been taken into charge/certified with any OS 7 Win - http://docs.oracle.com/html/B10130_02/reqs.htm#CHDHGGFE

  The combination only taken charge/certified is 10.2.0.5 on Win 7 Professional (or higher) - your questions should therefore not a matter of surprise. Assuming you have Win 7 Professional or higher, is there a reason that you can not install 11.2.0.1?

  HTH
  Srini

• TEMPRO v3.3.3 fails to install on Windows 7 64 bit

  Hello

  When I try to install Tempro 3.3.3 on Windows 7 64 bit, it stops after the third stage, finishes the installation and gives the error: "Setup ended because of an error" and Setup stops.

  Running as an administrator and/or mode "compatibility" doesn't change anything. My account is the only user and the administrator account.

  Any idea?

  Thank you
  Roel

  Hey Buddy,

  Have you checked other discussions regarding the installation of TEMPRO? You can find many useful comments there.

  Before you start a lengthy discussion, more information would be interesting.
  -You install or update TEMPRO?
  -You run OS preinstalled Toshiba?
  -Have you installed Toshiba Value added Package?
  -What laptop you have exactly?

• Tecra A11 - 11 H - drivers for Windows XP 64-bit

  Hello

  is - anyone know where to find the driver for the wireless card of Tecra A11 - 11: using Windows XP 64 bit, does anyone have a complete list of the hardware models Tecra A11 - 11: using as toshiba support website is not driver for Windows XP 64-bit.

  Thank you very much

  Hey Buddy,

  Windows XP 64-bit is not supported by Toshiba, there is no drivers for this OS. The 64-bit version of XP was not very popular then, probably, you will find all the drivers on external pages. If you want XP I recommend the 32-bit version or Windows 7 professional who has an XP virtualization mode.

  Tecra A11 - 11: 00 a WLAN Intel card in order to check the Intel page directly. Maybe you can find a driver: [www.intel.com]

  In addition, if you install a hardware such as Everest or PC Wizard 2011 diagnostic tool you can check the installed hardware and so you can search for drivers yourself.

  But as I wrote already: choose another OS ;)

• HP Pavilion 15-f097nr: drivers HP 15-f097nr Windows 7 64-bit

  I bought this HP 15-f097nr and he had installed Windows 8.1. I hate Windows 8, 8.1, 10. I was really disappointed when I looked on Support of Web of Hewlett Packard, and there no 64-bit of Windows 7 drivers, or all the Windows 7 drivers. Of course, I already had nuked the partitions Windows 8.1, installed Windows 7 64 bit Pro on the laptop and had no Wi - Fi, LAN, audio device, USB port or chipset drivers. I've done business with Hewlett Packard for many years, I've lost count. One of the main things I always liked HP, has been their support for their products. With 65% of these people still using Windows 7, I struggle to understand why HP does not support Windows 7 with this product. Could someone please help?

  You are the very welcome.

  I guess that the model I posted has older than your hardware.  It may have the same processor, but the G2 250 pilots probably did not contain the material ID's for the same update your hardware.

  Then... you're missing even the Intel graphics driver and Realtek ethernet driver?

  If so, see if these work instead...

  Graphics: Do not click on the most recent version of this driver is available, because it does not support the processor celeron laptop has.

  The file 3rd down on the left is the Setup file automatic 64-bit.

  https://Downloadcenter.Intel.com/download/25313/Intel-graphics-driver-for-Windows-10-and-Windows-7-8-1-15-33-

  Ethernet:

  This package contains the Realtek driver local area network (LAN) that allows the NIC (NIC) Realtek chip in the notebook models that are running an operating system supported.

  File name: sp69625.exe