cfdiv refreshes liaison to the option buttons

Similar Questions

• How uncheck you the option buttons in Adobe Acrobat Pro XI?

  How uncheck you the option buttons in Adobe Acrobat Pro XI?

  OK, so I have a three sets of radio buttons each three choices, so, basically, it looks like this

  Cheques:          (    )          (     )          (     )

  Deposit slips: () ())

  Envelopes:        (    )          (     )          (     )

  In case anyone is confused, () are radio buttons. Basically, I want radio buttons to act as check boxes, I want to be able to click them and outside. I don't want us boxes because I want them to be circles and not square. Is there a way to do this? Maybe using javascript, what code would be?

  Radio button names: QTY.

  XQTY

  XPrice

  Thanks in advance guys

  You don't have to use a script. I rarely use the option button because they cannot normally be deselected once in the Group has been selected, but here's a backdoor method I use in the mouse event to the top:

  Uncheck the box if the SHIFT key is pressed while clicking on

  If (event.shift) event.target.value = "Off";

  The user will know that it is available. You can also configure a button that resets the value of the button to "Off".

  Another option is to add another choice, as "not applicable".

• change the size of the option button

  How to change the size of the option button?
  Thank you!
  

  I hope that there is no option to change the size of the radio button. If you want to change it, you can use the images and apply CSS

  RadioButton {}
  Width: 40;
  height: 40;
  fontSize: 18;
  fontFamily: myMyriad;
  color: #FFFFFF;
  textRollOverColor: #FFFFFF;
  ("selectedUpIcon: Embed("/images/radio_on.png ");
  ("selectedOverIcon: Embed("/images/radio_on.png ");
  ("selectedDownIcon: Embed("/images/radio_off.png ");
  ("upIcon: Embed("/images/radio_off.png ");
  ("overIcon: Embed("/images/radio_off.png ");
  ("downIcon: Embed("/images/radio_on.png ");
  }

  Thank you
  Surendra.

• Conditionaly without refresh report view, when I select the option button

  Hello
  
  I have 5 option in an option button. I created 5 parts of report.
  I want to display region report, when I select any radio button then corressponding region report should be display. This shoude be without page refreshes.
  
  
  How can I do this...
  
  
  Thank you
  Ed
  
  Published by: Ed on November 3, 2010 06:16

  Kaushik, can you check one of the attributes of the region report ( region of change-> attributes-> region ID static ). It wouldn't hurt to go through the documentation before asking a question, especially when someone (Jari) had bothered you post the direct link for the answer.

  Another thing, have you even read the steps I posted earlier (on the changes that I made this page in your workspace), why don't you try the same in the apex 3.2 and see if it works? After all, you can see all the code that is there since its your workspace.

• Thunderbird COMPLAINT: Using [back |] Forward] buttons, loses "Privacy, Options button. Exit/Startup [restart] Thunderbird needed to restore the Options button.

  Thunderbird 31.7.0 (and before) COMPLAINT: using [back |] Forward] buttons, loses "In order to protect your privacy, Thunderbird has blocked a remote content in this message." Options button. Exit/Startup [restart] Thunderbird is require to retrieve the button 'Options '. Is there another way, without rebooting? [There is no help / Feedback in Thunderbird button... so I'm reporting it via Firefox.]

  Check if this being due to any any addon.

  Restart Thunderbird in Mode safe:
  Help > restart with disabled addons.
  Whist in safe mode, run for a while to see if that happens.

  If it does not work then one of your addons can cause a conflict.
  Disable each in turn to test.
  She might need to update.

• Could you please split the 'Options' button in two?

  Used to have a single button at the top of the e-mail message to show the remote content - of Thunderbird, but now there is an Options button with this choice as well as four more. Because so many messages force me to show the remote content, need me two clicks to continue with the message. Quite boring. If this button should be divided into a button 'Show remote content' and a button 'Other Options', things would return to the previous level of convenience. (I know I might opt for remote content automatically, but I like that another security measure). TIA!

  I agree with you.
  This has been reported as a bug.

  • https://Bugzilla.Mozilla.org/show_bug.cgi?id=1062961

  You can add your vote for this change.
  You vote by clicking on the link to Vote - at the top where it says:
  Importance:-normal with 4 votes (vote)
  You will need to register and sign in to vote.

• Pulling data from a selection of the option button to use in the field

  I have a radio with 9 options button (1 000, 2 000, 3 000... 9 000). It's a form of insurance, and I can't change to a drop down or fill-in, etc..  I need a later field in the form to the number they chose in the option box.  For example, if some select 3rd in the series of radio (3,000) button I want Field2 fill-in auto number 3 000.

  Is it possible to do an if / then statement to extract data from the radio button option?  I could do this in Excel but don't have a clue how to do here.  And I don't know about Java.  :-(

  Any help would be appreciated!

  Carol

  You can try this custom script that another user here suggested to me

  You click on properties > Calculate > custom calculation Script > change

  Then paste this in...

  var v = this.getField("Name_of_Radio_button_grouping").value;

  If (v == "1000") event.value = "1000";

  else if (v == "2000") event.value = "2000";

  else if (v == "3000") event.value = "3000";

  else if (v == "4000") event.value = "4000";

  else if (v == "5000") event.value = "5000";

  else if (v == "6000") event.value = "6000";

  else if (v == "7000") event.value = "7000".

  else if (v == "8000") event.value = "8000".

  else if (v == "9000") event.value = "9000".

  etc.

  else event.value = "";

• Prefill a text box from a selection of the option button

  Hi people,

  I just noticed an error in one of my first attempts at Javascript - luckily I don't think that one of my colleagues have noticed yet, but I need to fix it as soon as possible!

  I have two radio buttons naned "Radio Button13". One is for when the person is full time and one for when they are part-time. When the full time button is selected, I get text (that I placed in the value of the button) to fill out in advance a text box below. The text is something like "38 hours per week. Part-time has nothing.

  In the Mouse Up script for full-time, I placed:

  If (this.getField("Yes").value is "1")

  = this.getField("Working_Hours").value ' 08:30 to 17:00 Monday to Friday " < < < this text is same not the same as the value of the button so I don't know why I put that here, this is not what I want in the text box.

  The text of the button value is reflected in the area of text (called "working time") very well, but the idea is that when part-time work is selected, the user is able to enter the hours in the area. You can type, but as soon as you leave the text box, the text disappears.

  Where am I wrong? How can I solve this problem?

  It is not wrong, but it answers my question. If you keep things put in place what they are now, you can use the following custom calculate script:

  (function () {}

  Get a reference to the Group of radio buttons

  and its value

  var f = getField ("Radio Button13");

  v var = f.valueAsString;

  Allow the user to enter text

  Event.Target.ReadOnly = false;

  Located only value in this field if a change in the option box

  is what triggered this script

  If (event.source & event.source = f) {}

  Si (v ! == « Off » && v ! == "«) {}

  Event.Target.ReadOnly = true;

  Event.Value = v;

  } else {}

  Event.Value = "";

  }

  }

  })();

• Change the option button in the group by programming?

  Gidday

  Is it possible to create an option button in a group programmatically?

  See you soon

  Take a look at the help documentation.  RadioButton properties includes a property group.  There is an example in this article that should help you.

  http://help.Adobe.com/en_US/FlashPlatform/reference/ActionScript/3/FL/controls/RadioButton .html? filter_flash = cs6 & filter_flashplayer = 10.3 & filter_air = 2.6 #group

• Can't seem to load correct calculation on the option button

  Hi all

  Its a long time since I cut all code and need help with this question that I hope will help me other fields I'm calculating.

  So I use Acrobat X Pro, I'm new on so I have two radio buttons with the same name auth, but the choice of Yes and no; the Yes option button is the default.

  I have a read only area I want to maintain the value based on simple logic, if yes is clicked, then set a value of 350 set the value to 0

  I walked into the Javascript code within the custom calculation script

  var Field1 = this.getField("auth").value;

  If (field1 = "Yes") {event.value = "350";

  } else event.value = "0";

  When I test this the calculated field is STILL 350 regardless of the selected option button...

  someone tell me why? or especially how to fix it.

  Thank you

  George

  You have made the classic mistake of using the assignment operator 'is', where

  You should use the 'is' operator comparison in the if statement.

• Script to automatically calculate answers to the questions of the option button?

  Hello

  Anyone know if its possible / how to write a script to automatically count the responses of the radio buttons?

  For example, I have a form with 14questions, where the answers are either "Yes" 'Unknown' and 'No' - I used for each question radio buttons.

  At the bottom of the form, I want it to be automatically calculate how much 'yes' 'unknown' and 'No' responses there. (ie. a text box that displays the number of 'Yes', another area of text that displays the number of 'No'... etc)

  Can someone help me with this?

  Thank you so much

  OK, for the text field that counts the groups of numbers with the Yes option radio button is selected, you can use code like:

  // Custom Calculate script for text field
  (function () {
  
      // Initialize counter
      var sum = 0;
  
      // Loop through the fields
      // and increment the counter for each Yes value
      for (var i = 1; i < 15; i += 1) {
          if (getField("Question " + i).value === "Yes") {
              sum += 1;
          }
      }
  
      // Set the value of this field to the sum
      event.value = sum;
  
  })();
  

  Do the same for other areas, but change the 'yes' in the code above to the appropriate string, either 'No' or 'Unknown'.

  It would make sense to convert this to a function in a script at the level of the document, something like:

  // Document-level function
  var radioButtonValueCount = function (sVal) {
  
      // Initialize counter
      var sum = 0;
  
      // Loop through the fields
      // and increment the counter for each sVal value
      for (var i = 1; i < 15; i += 1) {
          if (getField("Question " + i).value === sVal) {
              sum += 1;
          }
      }
  
      // Set the value of the field that called this function to the sum
      event.value = sum;
  
  }
  

  You would then call it like that in the case of calculating a text field that counts the number of selections of Yes:

  // Set this field to the number of Yes selections
  radioButtonValueCount("Yes");
  

  Do the same for Dummies and unknown fields.

• Display the option button if the number of rows in the table is equal to 1

  I'm having issues there buy maybe a simple script out there.

  I have a table which can have up to four lines. If the table contains only one row, an option button can be clicked to change the format/entry of cells in this row. I have to hide this box of a user option, if they added more of a line to the table and make it available again if they reduce the number of lines to one.

  I have everything else works well (radio buttons change line format, add/delete rows in the table using buttons, number of rows in the first column)

  Anyone have any ideas?

  See you soon

  Bobby

  You can place it in the code that adds more lines when running... If you have questions send the fomr to [email protected] so I can check it out...

  Thank you

  Srini

• Cannot use the option button to access the folder of bookmarks hidden on a dead drive

  I'm on Mac OSX 10.7.5, and I can easily access the folder on my current drive by pressing the option key (so that the hidden library appears) then get bookmarks of otherwise hidden files (since it's my new boot drive)

  BUT

  I need to copy / move my LAST favorites since ten days previously, a dead hard drive. The drive is usable, just not able to start.

  BUT

  Since this amazing new 'hold option on GO in the Finder menu to see the invisible library feature' (sarcasm) requires your operating system to be started, I can't access the bookmarks folder in the library. How can I do this if the Finder is not started on the dying drive? Is - this make any sense?

  Check this?

  COR - el said

  Try:

  • http://forums.MacRumors.com/showthread.php?t=1209701

• Effect of the option button key

  Hello

  How to set touch radio button

  Purpose:

  When I touch the button on the radio button must be selected

  After I tried with no results

  1)

  _

  deliveryOn = new RadioButtonField("  On", _rbgdeliveryType, false)
          {
              public void fieldChangeNotify(int context) {
                  try {
                      this.getChangeListener().fieldChanged(this, context);
                  }
                  catch (Exception ex) {
                      System.out.println("Exception in fieldChangeNotify() in CustomButtonField class : " + ex.getMessage());
                  }
              }
  

  2)

  protected boolean touchEvent(TouchEvent event)
              {
  
                  if( event.getEvent()==TouchEvent.UP)
                  {
                      _storepickupOn.setFocus();  
  
                  }return super.touchEvent(event);
              }
  

  can someone tell me how to make this possible.

  Thank you

  sujithRavindran

  Hello

  @karan127 you are right it works

• Position of the option button for the answer is not in proper alignment.

  How can I get the option box and the response to align option? (See below). I don't know what happened to get that way.  I tried to change the width, the police, the type of police, has replaced the slide, etc. and have not been able to solve.  Regardless of the type of question, true-false, multiple choice, multiple selection, it is always like that. Thanks in advance for your help.

  

  Don ghinis

  LMS administrator / instructional designer.

  Check your preferences to see if you have enabled Autosize captions.  If so, turn it off and create a new question.