Challenge of the interface user tries to access the FM blog
New interface XML Authoring with FrameMaker 2015 - Central TechComm by Adobe
"Note: you will need to click [SAVE] to get access to the record."
Well, me Sun and UI-challenged colours... but even after Flash I scrolled up and down this page several times and not seen a link [REGISTER]. Tricks and tips welcome!
You must click on the red link "NEW way to simplified XML authoring in FrameMaker 2015" right above the gray area note to reach the site of Webinar.
It takes you right here: NEW way to XML simplified creation in 2015 of FrameMaker. You will see the [Save] button.
Tags: Adobe FrameMaker
Similar Questions
-
Access the interface user Web de VMware Server 2 will crash Firefox 3.5
Hello
Trying to access the web interface installation of VMware Server 2 running on Enterprise Linux 5 update 2 64-bit
using Mozilla Firefox 3.5 on XP causes Firefox to crash.
Previous Firefox 3.0.11 version was able to connect and log in successfully.
Everything in FF 3.5 cach has been deleted before trying to access the user interface. In addition, the certificate has also been removed before.
When you access the UI first with 3.5 ist ask to accept the certificate (identical to 3.0.11)
This will result in a blank page is displayed.
Closing FF 3.5 (clear cache included) and re-open it at the interface of the web UI that causes FF crash.
I m the only one to see this problem with the new Firefox 3.5 access to VMware Server 2 Web UI?
Kind regards
Agent of
Although VMware-server - 2.0.1 - 156745.x86_64 has been out for a while, so I just assumed it was your version.
Silly me
Hope that cure your problem.
-
Hi all
I developed an application where I have 6 pages and 5 tabs and based on the user role I posted the tabs for the user to access these pages.
But when the user, who doesn't have access to the particular page (say, page 2), but still the user can navigate to it directly by typing the page number in the URL.
I want to avoid such scenarios.
eg: http://Apex.Oracle.com/f?p=110:2 , when the user type this in the address bar, it navigates the user to this page even if this particular user does not have access to this page.
How to prevent the user to navigate through the URL, if the user tries to navigate directly through URLS rather than tabs, I have to give the error message.
Version: ORACLE APEX 4.2
Thank you
Good reading this recent post
Re: Authentication at the Page level
All links to a page and the page itself must be secure.
You can also consider the protection of session state to prevent tampering of the URL.
-
Hello
I installed the Log Insight 2.5 VM via vCenter Server ESXi 5, 5. I was able to deploy the virtual computer successfully and you can see the network through VAPP Options settings. (Attached picture - TIME settings).
Question:
Unable to access LI web Interface. While trying to access the Web interface, I get 'Apache2 Ubuntu by default Page' (img attachment). Insight of the newspaper runs and opens the web application on port 80.
Newspapers, controlled far-
status of /etc/init.d/loginsight
Open a session running Insight
Attached image Loginsight2-DURATION - file /storage/core/loginsight/var/runtime.log
# sh li - cassandra.sh - status
SH: li-cassandra-sh: not found
Check if the tcp 80 port is open through the netstat command. Yes, it is open.
Telnet on port 80, it says connection and crashes. Image attached - telnet-LI
Able to ping the IP address successfully.
How can I check http logs on console LI?
I would really appreciate response to this soon. I'm working on installation LI for more than a week and struggling to get through this way.
Thank you
Radhika
I believe that you with the configuration, but I tell you that the configured IP address and the IP you hit in your browser are not still the same IP, Log Insight does not work on Ubuntu, so you hit another system. To prove this, connect you to the console of the Insight newspaper and run:
# cat/etc/SuSE - release
SUSE Linux Enterprise Server 11 (x86_64)
VERSION = 11
PATCHLEVEL = 2
You will see that you are running SuSE to see a Ubuntu screen tells me that you have an IP address duplicate in your environment and you hit a node that is not an Insight newspaper. I hope this helps!
-
an error occurred while trying to access the server
an error occurred while trying to access the server, I get this message when you try to convert, what's the problem, the user of windows 7
Hi Laura,
It looks like you can try to access one of the services of Adobe Document Cloud in Adobe Reader. If so, please close the session, and then reconnect.
If you're still having problems, please try to connect via the web interface at https://cloud.acrobat.com.
Let us know how it goes!
Best,
Sara
-
A challenge: combining dirty tab Interface User Shell + self-closing-BTF
I find it difficult to use the facilities of the shell of the interface user ADF of the conduct of the stubborn self-closing-standalone task.
What the Shell of the user ADF interface does well: in the Shell of the user interface, you can open a standalone BTF as an activity, and if the BTF closes itself (that is to say... given the user selects ok or cancel/close button, the BTF stand-alone navigates to a special return flow option), the BTF closes and the ADF UI Shell correctly closes the tab around the activity.
My challenge is that I want to add installation tab 'dirty' shell ADF of the user interface for the task force, such as if the user inside the BTF selects a custom cancel/close button (not the Shell UI button close tabs) that accesses the task-flow-back option in the Working Group, they had the chance to confirm or cancel the closing via the ADF UI Shell dirty tab popup. (Note that task-flow-return options are crucial to BTF to self-latch because they not only allow the BTF of commit / rollback, as well as make them re-entering or playing with the functions of backup point).
If the ADF UI Shell shellLauncher Bon we call method makeCurrentTabDirty on the opening of the BTF, activity of the BTF tab is italicized properly. Even if the user selects the BTF Cancel button, the BTF farm (she disappears in fact from the Shell of the user of ADF interface) but the Shell of the user activity tab interface is still visible, then watch the dialogue dirty tab, which is too late, the Working Group has already closed.
So my solution is when the button close down BTF, before he navigates to the BTF task-flow-back option, I can get the ActionListener to the button close BTF to trigger an event that is contextual to the shell of the user ADF to capture interface "shut up" occurrence. The Shell of the user interface then has a chance to show the dirty tab dialog box by capturing the contextual event.
Then, my sticking point is the class TabContext provided in the Shell of the user interface has no way to call the dirty tab dialog box without calling the removeTab method. It is not desirable for the Shell UI close the BTF as task-flow-return of the BTF activities must always be called... remember that they have an additional feature that is required for the BTF.
Even if the TabContext method is a solution to display the dialog box dirty tab without closing the tab (TabContext is pretty easy to extend yourself if you have the source code), the problem to which I can't think a solution is, how to get the tab dialog box dirty to communicate with the BTF stand-alone version (yes/no) result such that it can take a decision on the abandonment of action close and let the user on the current page fragment, or accessing the task-flow-return node?
We could suggest that I could expose the dirty to the BTF stand-alone tab dialog such that she could show the dialog box confirm himself. However the point being is the BTF is autonomous and should have no knowledge where it is used, in the Shell of the user interface or some other supershell application. Publish plans to close the BTF via a contextual event seems fine, but alternatively of loading in the components of the interface layer user seems to break the independent principle I-don't-know-or-care-about-what-my-parent-caller-is-doing BTF appears on the border of evil.
Anyone pointers, suggestions or comments like you're-an-idiot-Chris,-do-it-this-way? Your help is appreciated.
Kind regards
CM.
PS. JDev v11.1.1.2.0 with interface User Shell v1.02How to get the dirty tab dialog box to connect the result (yes/no) with the BTF stand-alone version, as it can take a decision on the abandonment of action close and leaving the user on the current page fragment or accessing the task-flow-return node?
I hope that everyone interested in this challenge is useful the application at this link: http://soadev.blogspot.com/2010/08/loosely-coupled-bounded-task-flows.html
Kind regards
Rommel Pino
http://soadev.blogspot.com -
Generator interface user Web supports the DSC Module?
A simple question:
Can I use the generator of the user Web interface for Web client access to a Windows-LabVIEW System with the DSC module or supportet has this tool user interface only the LabVIEW base for the objects in the front?
For example: Can I use a web client to review historical data and alarms? Can I use a web client with full support for "The front panel security dialog box" (see http://zone.ni.com/reference/en-XX/help/371618F-01/lvdsc/front_panel_security_db/)?
Best regards
Frank
Hi Frank,.
Yes, you can use the generator of the user Web interface to access historical data and view the current alarms. The LabVIEW 2010 version of the ASN has several built-in RESTful web services that make the Citadel and alarm available via HTTP data. Here are some resources to provide details on how it works.
Interact with Web Module DSC Services
Here is an example that illustrates how to implement web service at the Citadel communication:
Communication of data via Web Services in the Web of LabVIEW user interface Builder
Kind regards
Mike
-
I have an error was encountered trying to access the battery
I have an error was encountered trying to access the battery
Hello
There seems to be several users facing this problem with HP laptops.
If you use an HP laptop, please see the following thread.
an error occurred trying to access the battery - Microsoft Answers:
http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/an-error-was-encountered-trying-to-access-the/5c4f34b5-9f8e-4509-9560-96e60720e24eLet us know if that helps.
Concerning
-
five out of six times (approximately) to start outlook express 6, it crashes while trying to access the first message. This happens several times, and each time the first message (even) appears in the Inbox, even if the process is not complete. sometimes clear the cache, or cleaning IE temp. the files seems to help - but not always.
It's VERY frustrating!
Do a household.1: do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.Information on the maximum size of the .dbx files that are used by Outlook Express:
http://support.Microsoft.com/?kbid=9030952: after you're done, followed by compacting your folders manually while working * off * and do it often.Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.3: disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the processors and causes a multitude of problems such as time-outs and account setting changes. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
http://www.oehelp.com/OETips.aspx#3For some programs, turning it off is not enough. You may need to uninstall and reinstall in custom Mode and remove the analysis when e-mail messages. -
I'm trying to access a wireless network with the password provided for me. I get the following error message: "the network password needs to be 40bits or 104bits depending on your network configuration. This can be entered as 5 or 13 characters ascii or hexadecimal 10 or 26. "what does this error message mean and how do I address so that I can access the wireless network?
I use XP Professional with service pack 3. I get this error message every other time I try to log in to a protected wireless network security. I used to not get this message; but, now, it may be impossible, sometimes to call all wireless providers when I might only need for a short period or after hours service opening.
In addition, it is my computer that requires the network password to be different, not the provider of wireless. A password is given to me who works for other users, but my computer won't let me use it.
Hello
I suggest you to visit these links and check if it helps:
It will be useful.
-
- Tried to reconfigure the firewall
- Tried to change files and printers, sharing options
- Restarted other computers trying to connect to my public folder
- Tried to adjust the network discovery
- Do all computers on the network among the same workgroup
- I can access public folders from the other computer and their content
- Other computers on my network, in my workgroup can see my public folders, and users, but cannot access it.
- Other computers can see my computer, but can not access: error code: 0 x 80070035.
Can't access: 'Public' and 'Users' in the title:
-Network
MyName-PCPlease don't give me that: "If you try to connect to another computer, make sure that this computer is on, that you have enabled file and printer sharing on both computers, and file and printer sharing can communicate through your firewall." Because I seek NOT to connect to another computer... I want to just access MY Public folder and the users folder and eventually allow others to access also.
Hi Katmandu774,
Welcome to Microsoft Answers Forums.
The Public folder is a convenient way to share files that are stored on your computer. You can share files in this folder with other people using the same computer and with people using other computers on the same network. Any file or folder you put in the folder Public is automatically shared with the people who have access to your Public folder.
If you are not on a domain, you can limit network access to the Public folder so that people with a user account and password for this computer. To do this, turn on sharing protected by password.
- Open the network and sharing Center by clicking the Start button, clicking Control Panel, click network and Internet, click network and sharing Center.
- Click the arrow next to password protected sharing, and then click one of the following options:
· Turn on password protected sharing
· Turn off password protected sharing
- Click apply. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
To control the level of access to the Public folder
- Open the network and sharing Center by clicking the Start button, clicking Control Panel, click network and Internet, click network and sharing Center.
- Click the arrow next to public folder sharing, and then click one of the following options:
· Turn on sharing so anyone with network access can open files
· Turn on sharing so anyone with network access can open, change and create files
· Turn off sharing (people logged on to this computer can still access this folder)
- Click apply. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
Also, make sure you add everyone to the public folder and give the necessary permissions to access it.
Sharing files with the Public folder
http://Windows.Microsoft.com/en-us/Windows-Vista/sharing-files-with-the-public-folder
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
I'm trying to access the functions tells me windows explore stopped workingI
original title: Explore Windows crash
Unable to access any windows especially update function, which is where I am responsible for the problem. I'm trying to access the functions tells me windows Explorer has stopped working
Hello
What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).----------------------------------------------------
Follow these steps:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlA quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx===========================================
Refer to these discussions because many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3Hope these helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
remote VPN and vpn site to site vpn remote users unable to access the local network
As per below config remote vpn and vpn site to site vpn remote users unable to access the local network please suggest me a required config
The local 192.168.215.4 not able ping server IP this server connectivity remote vpn works fine but not able to ping to the local network vpn users.
ASA Version 8.2 (2)
!
host name
domain kunchevrolet
activate r8xwsBuKsSP7kABz encrypted password
r8xwsBuKsSP7kABz encrypted passwd
names of
!
interface Ethernet0/0
nameif outside
security-level 0
PPPoE client vpdn group dataone
IP address pppoe
!
interface Ethernet0/1
nameif inside
security-level 50
IP 192.168.215.2 255.255.255.0
!
interface Ethernet0/2
nameif Internet
security-level 0
IP address dhcp setroute
!
interface Ethernet0/3
Shutdown
No nameif
no level of security
no ip address
!
interface Management0/0
Shutdown
No nameif
no level of security
no ip address
management only
!
passive FTP mode
clock timezone IST 5 30
DNS server-group DefaultDNS
domain kunchevrolet
permit same-security-traffic intra-interface
object-group network GM-DC-VPN-Gateway
object-group, net-LAN
access extensive list ip 192.168.215.0 sptnl allow 255.255.255.0 192.168.2.0 255.255.255.0
192.168.215.0 IP Access-list extended sheep 255.255.255.0 allow 192.168.2.0 255.255.255.0
tunnel of splitting allowed access list standard 192.168.215.0 255.255.255.0
pager lines 24
Enable logging
asdm of logging of information
Outside 1500 MTU
Within 1500 MTU
MTU 1500 Internet
IP local pool VPN_Users 192.168.2.1 - 192.168.2.250 mask 255.255.255.0
ICMP unreachable rate-limit 1 burst-size 1
enable ASDM history
ARP timeout 14400
NAT-control
Global 1 interface (outside)
NAT (inside) 1 0.0.0.0 0.0.0.0
Route outside 0.0.0.0 0.0.0.0 59.90.214.1 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
the ssh LOCAL console AAA authentication
AAA authentication LOCAL telnet console
AAA authentication http LOCAL console
AAA authentication enable LOCAL console
LOCAL AAA authentication serial console
Enable http server
x.x.x.x 255.255.255.252 out http
http 192.168.215.0 255.255.255.252 inside
http 192.168.215.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-3des esp-sha-hmac RIGHT
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
Crypto-map dynamic dynmap 65500 transform-set RIGHT
card crypto 10 VPN ipsec-isakmp dynamic dynmap
card crypto VPN outside interface
card crypto 10 ASA-01 set peer 221.135.138.130
card crypto 10 ASA - 01 the transform-set RIGHT value
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 65535
preshared authentication
the Encryption
sha hash
Group 2
lifetime 28800
Telnet 192.168.215.0 255.255.255.0 inside
Telnet timeout 5
SSH 0.0.0.0 0.0.0.0 outdoors
SSH timeout 5
Console timeout 0
management-access inside
VPDN group dataone request dialout pppoe
VPDN group dataone localname bb4027654187_scdrid
VPDN group dataone ppp authentication chap
VPDN username bb4027654187_scdrid password * local store
interface for identifying DHCP-client Internet customer
dhcpd dns 218.248.255.141 218.248.245.1
!
dhcpd address 192.168.215.11 - 192.168.215.254 inside
dhcpd allow inside
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
Des-sha1 encryption SSL
WebVPN
allow outside
tunnel-group-list activate
internal kun group policy
kun group policy attributes
VPN - connections 8
Protocol-tunnel-VPN IPSec
Split-tunnel-policy tunnelspecified
Split-tunnel-network-list value split tunnel
kunchevrolet value by default-field
test P4ttSyrm33SV8TYp encrypted password username
username kunauto password bSHrKTGl8PUbvus / encrypted privilege 15
username kunauto attributes
Strategy Group-VPN-kun
Protocol-tunnel-VPN IPSec
tunnel-group vpngroup type remote access
tunnel-group vpngroup General attributes
address pool VPN_Users
Group Policy - by default-kun
tunnel-group vpngroup webvpn-attributes
the vpngroup group alias activation
vpngroup group tunnel ipsec-attributes
pre-shared key *.
type tunnel-group test remote access
tunnel-group x.x.x.x type ipsec-l2l
tunnel-group ipsec-attributes x.x.x.x
pre-shared key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
Review the ip options
inspect the netbios
inspect the rsh
inspect the rtsp
inspect the skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect the tftp
inspect the sip
inspect xdmcp
inspect the icmp
!
global service-policy global_policy
context of prompt hostname
call-home
Profile of CiscoTAC-1
no active account
http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
email address of destination [email protected] / * /
destination-mode http transport
Subscribe to alert-group diagnosis
Subscribe to alert-group environment
Subscribe to alert-group monthly periodic inventory
monthly periodicals to subscribe to alert-group configuration
daily periodic subscribe to alert-group telemetry
Cryptochecksum:0d2497e1280e41ab3875e77c6b184cf8
: end
kunauto #.Hello
Looking at the configuration, there is an access list this nat exemption: -.
192.168.215.0 IP Access-list extended sheep 255.255.255.0 allow 192.168.2.0 255.255.255.0
But it is not applied in the States of nat.
Send the following command to the nat exemption to apply: -.
NAT (inside) 0 access-list sheep
Kind regards
Dinesh Moudgil
P.S. Please mark this message as 'Responded' If you find this information useful so that it brings goodness to other users of the community
-
ORA-33288: another user has inconsistent access to the analytic workspace
Gurus
A customer of our meeting suite error when make action (refresh the data) of the responsibility for the EBiz project portfolio analysis
# # 0 in detail java.sql.SQLException: ORA-34344: FPA analytic workspace. FPAPJP is not attached.
ORA-06512: at the 'APPS '. FPA_UTILITIES_PVT', line 129
ORA-06512: at the 'APPS '. FPA_PROCESS_PVT', line 2467
ORA-33272: FPA analytic workspace. Cannot open FPAPJP.
ORA-33288: another user has inconsistent access to the analytic workspace FPA. FPAPJP and the timeout has expired.
ORA-06512: at line 1
I searched the documentation of OLAP, metalink, google, but all simply suggest "Expect that the conflict is over.". We waited and asked their DBA to check active connections, but none has proven to help us.
Issues related to the:
======
1. how to avoid this error?
2. How do I know the number of users / user information connected to the FPAPJP workspace?
3. How can we close these sessions?
Really appreciate your inputs.
Thank you
Charlene# 1, it seems that the process is trying to detach a workspace that is not attached. Just check in your code if you try off somewhere and work space is not attached.
Thank you
Brijesh -
Today, all the laptops in the House (last FF ver) started throwing the error:
(Error code: ssl_error_rx_record_too_long)
Trying to access any Google products: gmail, Google + Analytics, Google Web site, etc.
Maybe you are looking for
-
I have a problem with iCloud drive
Hello My problem is rare. When I activate the iCloud Desktop Drive & Documents folders in Finder seem two offices. If I delete the office with your preferred category after restarting the Finder again, it seems. It is interesting to note that in the
-
How to change e-folder to another location
I need to change the thunderbirds folder to another location, because the C drive is very small flash drive. And he gets too full.
-
Apparently, I got something to add a filter or soemthing please I want to just uninstall it. I tried to disable it and my frames are still missing.
-
I have a Lenovo SL400 with OS 32-bit Vista Business SP 2. I'm more able to install windows updates. It acts like its operation and then fails after updating. I have stopped services, no change, I ran "fix"and there have been no changes. " I tried
-
Defender fails to start with error 0x800106ba after application Vist SP 1
I used Vista service pack 1 and now advocate does not start with a code of error 0x800106BA. I tried to uninstall it, but has not found how do for anywhere. I also tried to reinstall but the system says it is the first part of Vista. Any ideas?