change a string of html on the server and then download it.

Similar Questions

• When playing xbox live and someone turns on the laptop he loses the connection to the server and then resets modem

  when im playing left 4 dead 2 versus and kids turns to the top turn of the page to play counterstrike he says: interruption of the connection to the server and then resets my modem or router

  I had the Charter to come out, they ran the new line and I always have problem help me please

  Hello

  ·         What operating system do you use?

  Step 1:

  I suggest you to update the firmware of the router on the manufacturer's Web site and verify that it helps. For more information on how router update contact your router manufacturer's support site.

  Step 2:

  Try to assign the static IP address for an Xbox 360 and the laptop and check if it helps.

  To assign a static IP address for your laptop:

  one) click Start > Control Panel > network and Internet > network and sharing Center and click on change adapter settings.

  (b) select your network adapter. (if you have more than one list) Right-click on the adapter and choose 'Properties' from the list.

  (c) under "this connection uses the following items," click once on "Internet Protocol Version 4 (TCP/IPv4) to select it and then click on the button 'Properties'.

  (d) click the radio button for "use the following IP address:" enter the static IP address, you want to use in the IP address box.

  (e) press "Tab" when you are finished and that the "Subnet mask" value should automatically populate with the correct value.

  (f) Finally, you will need to enter the IP address of your default gateway and the IP addresses of your favorite servers and auxiliary DNS.

  (g) the default gateway is the IP address of your router. The DNS addresses are usually provided to you by your ISP.

  (h) click on 'OK' to save your changes, and then click 'OK' again on the local area network connection properties window. You have now assigned to your computer a static IP address in Windows

  To assign a static IP for Xbox:

  (a) turn on the console and press "Guide" on the controller to bring up the quick menu.

  (b) go to the 'Settings' tab, then open "System Settings." The dashboard opens and the 'System settings' menu.

  (c) select 'Network settings' in the menu new. Another list of menu options is displayed. Choose "Configure network." This opens the network configuration menu, where you can set a static IP address. Note your IP address, subnet mask and gateway.

  (d) change your settings 'IP' to 'Manual' instead of 'automatic '. This will allow you to manually select your IP address and other settings. It can also erase your current settings, that's why you need to write.

  (e) change the last three digits of the IP address. Enter the same numbers for the subnet mask and the gateway that you saved in step 3. Press 'B' to exit from the menu and save the changes

• Open a local copy or move on the server, and then disconnect while the task is running until the end

  RNOS6 running on RNDU600 +.

  Looking to start a local copy or move of the large collection of files on the server, and then disconnect the PC while the task is running until the end. For example, to move a branch of several hundreds of GB of small files from one share to another, or copy them to a share.

  Seems to make my PC (in wireless) is inefficient as each file seems to have sent to the PC first, then return to the NAS.

  Is there a way of ordering on the NAS, so that it can continue the operation even if the PC is disconnected?

  Have you tried to make using the web administration page?

• Thunderbird connects to the server and starts downloading the messages, but none don't go down

  Thunderbird has worked fine until today. I open the program and click download messages. Thunderbird connects the server normally and I get a message like usual 'download message 1 (etc.)", but nothing happens then. No message appears.

  I can download on my smart phone messages or view on the server site but really need them on my PC

  I use Windows 8.1.

  Any suggestions gratefully accepted. Thank you

  Try to load the first message online with webmail and see if that frees the flow. Sometimes a message in the wrong format can hang things up.

• Dreamweaver really slow when it is connected to the server and then hangs?

  I traced my server site as a network drive and when I add as a site in Dreamweaver, it is REALLY slow and it was only in code view, split and design views are basically usable UN - it will also crash when I try to save a file.

  Any help is massively appreciated - thank you,

  James

  Hello

  I know that some people do not have this, but it is not recommended.

  Everything depends on the latency of the network and "dead time", if the latency is too high, (perhaps by your page referencing external scripts (e.g. jQuery) then this can make the latency problem a very visible thing and slow Dw.) This is because your server has 'get' the file referenced externally before offering the file for you (by dry weight), even if your page shows the link, the server sends the entire file, if you can't "see" it.

  Save the file, can (and is) occasionally hang a program like Dw, especially when the server attempts to send the file to you and saving the file on the server at the same time.

  Using this type of editing is your decision.

  PZ

• Remove the snapshot from the server and then send a mail to me when the work is finished.

  Hi all

  Could someone help me with a script that would do this?

  Concerning

  Tyler

  This goes in the direction of what you are looking for?

  $snaps = Get-VM | Get-Snapshot
  Remove-Snapshot -Snapshot $snaps -Confirm:$false
  
  $emailFrom = "[email protected]" $emailTo = "[email protected]" $subject = "All snapshots are removed" $body = $snaps | select VM,Name,Created,SizeMB | ft -AutoSize | Out-String $smtpServer = "smtpserver"
  $smtp = new-object Net.Mail.SmtpClient($smtpServer)
  $smtp.Send($emailFrom, $emailTo, $subject, $body)
  

• "Try to connect with the server" and the update bar remains at 2%

  Hello, my creative cloud is not updated, there simply to appear the message "Try to connect with the server" and the update bar remains at 2%. How could I solve this problem? Thank you.

  Mac or Windows and EXACTLY what version of the operating system?

  Recent Mac AND Windows operating systems have been known to cause problems "weird."

  Please read https://forums.adobe.com/thread/1499014

  -try some steps such as changing browsers and disable your firewall

  -also clear the cache of your browser if you start with a fresh browser

  -check the file hosts for blocked entries https://forums.adobe.com/thread/1912777

  http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip.

  https://helpx.Adobe.com/creative-cloud/KB/creative-cloud-desktop-application-failed.html

  http://helpx.Adobe.com/creative-cloud/KB/failed-install-creative-cloud-desktop.html

• It says attempts to connect to the server and will not download installation

  It says trying to connect to the server and download any new installation

  Please read https://forums.adobe.com/thread/1499014

  -try some steps such as changing browsers and disable your firewall

  -also clear the cache of your browser if you start with a fresh browser

  http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip.

  http://helpx.Adobe.com/creative-cloud/KB/failed-install-creative-cloud-desktop.html

  or

  A chat session where an agent can remotely look inside your computer can help

  Cloud creative support chat (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• Error: A connection has been established with the server, but then an error occurred during the connection process.

  Hello

  I have MsSql running in the cluster environment and recently face the problem when there is a security agent installed in MsSql server, which the agent does nothing but only to capture the local database activity. The error led is as below:

  ID from step 1

  Server NIBKSQLCLUST

  Job name LSBackup_DRIB

  Newspaper log shipping backup job step name.

  Time 00:00:02

  SQL severity 0

  SQL Message ID 0

  Operator by e-mail

  Operator Net sent

  Operator paged

  Retries attempted 0

  Message

  2011-03-21 08:00:02.62 * error: could not retrieve parameters of backup for primary ID '26f46141-a676-41b2-8653-11f1b13de43a '. (Microsoft.SqlServer.Management.LogShipping) *.

  2011-03-21 08:00:02.63 * error: could not connect to the server NIBKSQLCLUST. (Microsoft.SqlServer.ConnectionInfo) *.

  2011-03-21 08:00:02.63 * error: a connection has been established with the server, but then an error occurred during the connection process. (provider: Named Pipes Provider, error: 0 - no process is on the other end of the pipe.) (.Net SqlClient data provider) *.

  2011-03-21 08:00:02.63 - END OF THE TRANSACTION LOG BACKUP-

  The process to run correctly when I turned off the security officer. Advice kindly the cause of this problem and is where all configurations should be set / changed in MsSql server.

  Thank you

  Boonlep coulibaly

  Hello

  I suggest you to send your request from the link and check.

  http://msdn.Microsoft.com/en-us/hh361695.aspx

  http://msdn.Microsoft.com/en-us/library/bb545450.aspx

• Error on image from the server and display streaming

  Hi all

  Im trying to read an Image that origin of the server and displays on a screen

  Here's the code I'm using to broadcast the image.

  It is streaming on my Simulator as well as on some devices.

  But on some devices, it's not streaming and throw an exception.

  public UrlToEncodedImage(String url)
  {
  HttpConnection connection = null;
  InputStream inputStream = null;
  byte[] dataArray = null;
  
  try
  {
  connection = (HttpConnection) Connector.open(url+getConnectionString(), Connector.READ, true);
  inputStream = connection.openInputStream();
  byte[] responseData = new byte[10000];
  int length = 0;
  StringBuffer rawResponse = new StringBuffer();
  while (-1 != (length = inputStream.read(responseData)))
  {
  rawResponse.append(new String(responseData, 0, length));
  }
  int responseCode = connection.getResponseCode();
  if (responseCode != HttpConnection.HTTP_OK)
  {
  throw new IOException("HTTP response code: "+ responseCode);
  } 
  
  final String result = rawResponse.toString();
  dataArray = result.getBytes();
  }
  catch (final Exception ex)
  { }
  
  finally
  {
  try
  {
  inputStream.close();
  inputStream = null;
  connection.close();
  connection = null;
  }
  catch(Exception e){}
  } 
  
  bitmap = EncodedImage.createEncodedImage(dataArray, 0,dataArray.length);
  // this will scale your image acc. to your height and width of bitmapfield
  
  int multH;
  int multW;
  int currHeight = bitmap.getHeight();
  int currWidth = bitmap.getWidth();
  if(currHeight>350&&currWidth>350){
      bitmap=scaleToFactor(bitmap,currWidth,currHeight,Display.getWidth()-20,250);
  }
  
  }
  public EncodedImage getEncodedImage()
  {
  return bitmap;
  }
  public  EncodedImage scaleToFactor(EncodedImage encoded, int curWidth, int curHeight, int newWidth,
          int newHeight)
  {
       int numerator_width = Fixed32.toFP(curWidth);
       int denominator_width = Fixed32.toFP(newWidth);
       int scale_width = Fixed32.div(numerator_width, denominator_width);
  
       int numerator_height = Fixed32.toFP(curHeight);
       int denominator_height = Fixed32.toFP(newHeight);
       int scale_height = Fixed32.div(numerator_height, denominator_height);
  
       return encoded.scaleImage32(scale_width, scale_height);
  }
  private static String getConnectionString()
  {
      String connectionString = null;
      if(DeviceInfo.isSimulator())
      {
              if(UrlToEncodedImage.USE_MDS_IN_SIMULATOR)
              {
                     connectionString = ";deviceside=false";
              }
              else
              {
                     connectionString = ";deviceside=true";
              }
      }
      else if(WLANInfo.getWLANState() == WLANInfo.WLAN_STATE_CONNECTED)
      {
         connectionString = ";interface=wifi";
      }
  
      else if((CoverageInfo.getCoverageStatus() & CoverageInfo.COVERAGE_DIRECT) == CoverageInfo.COVERAGE_DIRECT)
      {
          String carrierUid = getCarrierBIBSUid();
          if(carrierUid == null)
          {
           connectionString = ";deviceside=true";
          }
          else
          {
             connectionString = ";deviceside=false;connectionUID="+carrierUid + ";ConnectionType=";
          }
      }                
  
     else if((CoverageInfo.getCoverageStatus() & CoverageInfo.COVERAGE_MDS) == CoverageInfo.COVERAGE_MDS)
      {
        connectionString = ";deviceside=false";
      }
  
     else if(CoverageInfo.getCoverageStatus() == CoverageInfo.COVERAGE_NONE)
      {}
      else
      { connectionString = ";deviceside=true";} 
  
      return connectionString;
  }
  private static String getCarrierBIBSUid()
  {
      ServiceRecord[] records = ServiceBook.getSB().getRecords();
      int currentRecord;
  
      for(currentRecord = 0; currentRecord < records.length; currentRecord++)         {             if(records[currentRecord].getCid().toLowerCase().equals("ippp"))             {                 if(records[currentRecord].getName().toLowerCase().indexOf("bibs") >= 0)
              {
                  return records[currentRecord].getUid();
              }
          }
      }
  
      return null;
  }
  

  The underlined part of the code is where the uid is sent as public _.

  Please, look in the code and let me know where the error is, or is there a better way to disseminate the image.

  In the hope that you hear.

  Thank you & best regards

  Krishnan

  Hello

  I found the error.

  It's in the URL sent by the server.

  The URL consisted of http://google.com

  But the format required to retrieve the image on several device would be http://www.google.com.

  Thanks for anyone who tried to help him.

  Krishnan.

• Photoshop continues to try to install an update and said "trying to connect to the server" and it is permanently stuck there and does not work, someone has an idea how to please?

  Yes basically it does not connect to the server and while trying to perform an update, it is still stuck at 5%, can you help me please? It simply doesn't get it.

  Sorry, I guess that's a Mac.

  Please, try the steps below to the window of the machine:

  (1) uninstall Adobe CC (https://helpx.adobe.com/creative-cloud/help/uninstall-creative-cloud-desktop-app.html)

  (2) restart the machine.

  (3) install the latest Adobe Creative cloud version from the link: CC help | Creative cloud desktop

• I get this error message 'some files on the server may be missing or incorrect. Clear the cache of the browser, and then try again. If the problem persists please contact author Web site. »

  Some files on the server may be missing or incorrect. Clear the cache of the browser, and then try again. If the problem persists, please contact Web site author.  But all the content loads correctly, and it just seems to be an annoying error message.  Does anyone know how I can get rid of this or that which is the cause.  Site is: http://davidkimlaw.com

  You solve the symptom and not the problem. If something is to change the files after they are exported from Muse, the consequences could be vast and varied download to download.

  Don't the accordion on the 'AREAS' jobs page widget if this file exported (and unaltered) opens in the browser on your local computer? It doesn't seem to work on the online site, which could be linked to the questions of the error was about or may be an offshoot of some hand changes were made after export.

  If you empty the re-export of Muse in a folder and then download the same files, I'll take a second look at what's going on. If you wish, you can you could do that in a subfolder so as not to disturb the live site. (When I detected that the index.css file is out of sync I was on my phone and could not go any further.)

  There is also more information about the possible causes of this error here "some files on the server may be missing or incorrect" Warning Message>.

• I always get this message: some files on the server may be missing or incorrect. Clear the cache of the browser, and then try again. If the problem persists, please contact Web site author.

  It seems to happen whenever a update of Muse coming...

  I'll transfer my site and when I visit it I get this message even that was supposed to be resolved there are a few versions:

  "Some files on the server may be missing or incorrect. Clear the cache of the browser, and then try again. If the problem persists please contact author Web site. »

  I use the latest version of Muse: 2014.3 release

  I looked at my list of assets within the Muse - nothing is marked not linked.

  I tried to upload my site many times... within the Muse and with FileZilla.

  Fortunately, I have saved the latest version of my site - which was created in the version prior to 2014.3 - and downloaded again.  It works and can be seen here: www.snapscene.ca.

  But as soon as I make all the changes file of Muse, save it under a different name (to be compatible with 2014.3) and upload it - I get the message when visiting the site.

  What gives?

  -Adrian

  It seemed to me the solution.

  When I export the files, I simply left Muse overwrite the files in the destination folder. The files may not overeritten correctly.

  Manually, I went into this folder destination and destroyed all the old files exported.

  I then re-exported the files and then uploaded. All workes from there.

• My 5s iphone suddenly showed no service, then I made an attempt to update to ios and itunes connected, now iphone is not enable and display cannot connect to the server and in itunes it shows unable to check your device.please help me

  My 5s iphone suddenly showed no service, then I made an attempt to update to ios and itunes connected, now iphone is not enable and display cannot connect to the server and in itunes it shows unable to check your device.please help me

  Assuming that you have a valid SIM card in the phone, it is more often symptomatic of a phone that has been hacked or jailbroken to unlock.

  Where do you have the phone first?

• Im having trouble with my iphone 16 GB ios 9.3.3 5s (G 13, 34) receive error code 22 tries to connect to the server, and nowhere suggestions?

  Im having trouble with my iphone 16 GB ios 9.3.3 5s (G 13, 34) receive error code 22 tries to connect to the server, and nowhere suggestions? I have tried almost everything turn power switch wifi in the middle and doing it to try to track down the problem in the Device Manager and im completely disgusted

  Have you tried turning off and back on again?