Thunderbird connects to the server and starts downloading the messages, but none don't go down
Thunderbird has worked fine until today. I open the program and click download messages. Thunderbird connects the server normally and I get a message like usual 'download message 1 (etc.)", but nothing happens then. No message appears.
I can download on my smart phone messages or view on the server site but really need them on my PC
I use Windows 8.1.
Any suggestions gratefully accepted. Thank you
Try to load the first message online with webmail and see if that frees the flow. Sometimes a message in the wrong format can hang things up.
Tags: Thunderbird
Similar Questions
-
Windows 8 worked well without problems. So I think some updates were automatically installed and now none of the 3 browsers work. Network utilities show always the computer is connected to the internet, but the speed tests it does not at all. Our other computer with Windows 8 ceased to be able to access the internet at the same time.
I tried to restore to a previous restore point, but it is still not possible to access the internet.
Thank you!
After making back all Microsoft updates and spend 4 hours on the line with the support of Microsoft, we have reduced to eSet having a service that forbade access to the internet, even if we have disabled the firewall. Stopping this service restored internet access.
eSet has been marked as compatible on different Web sites, but check on eSet they revealed there are questions.
Initially things worked but eSet must have updated something that caused problems.
-
I am connected to the WLan, but none of the Web pages cannot be accessed
Hello
Radio has stopped working on my laptop.
It will connect to multiple wireless networks but no web pages cannot be displayed and msn doesn't work.When connected to the internet works fine. The wireless is turned on.
Any ideas?
Thank you
HeatherHello
There are many discussions in the forum about wireless setup, but you can start with this microsoft document to reconfigure the wireless network:
[http://www.microsoft.com/athome/moredone/wirelesssetup.mspx]I also suggest to search for "Wireless Setup" on some search engines since there are many many documents there where is described how to solve these problems without wire.
Also, it would be nice if you tell us what kind of machine you have, what operating system is installed (Windows XP or Vista), what router you're using, etc...
Good bye
-
Unable to connect to the internet but I don't have a driver for the Ethernet cables.
Original title: connect to internet
I reloaded Microsoft Windows Vista, now I can't connect to the internet. He says that I don't have a driver for the Ethernet cables. What can I do to fix this?
Hello
You download the drivers from the website of the manufacturer of the computer.
Use the computer that you are on to get here > download save Driver/s to Office > copy to flash drive > transfer and install them on the problem.
Driver downloads:
Acer:
http://us.Acer.com/AC/en/us/content/drivers
ADVENT:
http://www.adventcomputers.co.UK/product-downloads
Alienware:
http://support.Alienware.com/Support_Pages/Restricted_Pages/driver_downloads.aspx
ASUS:
Dell:
http://www.Dell.com/support/drivers/us/en/19/ProductSelector
eMachines:
http://www.eMachines.com/EC/en/us/content/drivers
Fujitsu:
http://www.Fujitsu.com/us/support/
Gateway:
http://us.gateway.com/GW/en/us/content/drivers-downloads
HP:
http://WWW8.HP.com/us/en/drivers.html
Lenovo:
http://support.Lenovo.com/en_US/downloads/default.page#
LG:
http://www.LG.com/us/support/software-manuals
Samsung:
http://www.Samsung.com/us/support/downloads
Sony Vaio:
http://eSupport.Sony.com/Perl/select-System.pl?Director=driver
Toshiba:
http://support.Toshiba.com/drivers
See you soon.
-
My mini ipad 4 has no battery completely not discharged, called to the charger, but the system does not start. What should do? Already a time connected to the charger, but the system does not start. I have iPad 3 months and never suffered no damage.
When connected to the charger make a forced reboot: hold the home and sleep buttons, wait for the Apple logo, release the buttons. May take a few tries.
-
My husband and I share a PC. He has his desk top and I have mine, just that recently, I have not been able to connect to what anyone on my side of the PC, but its East side works well, it can connect to the internet, but I can't any idea what should I do? I ran virus scan and his side of own, cannot check the mine but cannot connect help please.
Hello
1. you remember to make changes to your computer, after which the issue started?
2. do you have a cable or a wireless connection?I would recommend that you follow these steps.
Step 1:
Test the issue in safe mode with network and check if that helps.
Step 2:
Configure the connection to obtain an IP address automatically.a. click "Start", enter "NCPA. CPL"(without quotes) in the search bar and press"Enter. "b. right-click on the network connection, and then click "Properties".If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.c. click Select 'Protocol Version 6 (TCP/IPv6) Internet' and then click 'properties '.d. check "obtain an IP address automatically" and "Obtain DNS server address automatically".e. click 'OK '.f. click Select 'Protocol Internet Version 4 (TCP/IPv4)' and then click 'properties '.g. check "obtain an IP address automatically" and "Obtain DNS server address automatically".h. click on 'OK '.Step 3:
Follow the steps in this article and check if that helps.
Why can't I connect to the Internet?
Steps are also applicable for Windows Vista.
-
I am fully connected to the Internet, but when I click on my home page and even several other pages, including Windows Live Mail, I get an error message that my DNS server is not responding. How can I work around this problem and to connect to the Internet anyway?
You want to be sure that you use the right setting for your DNS server. You can move this in your browser using the digital URL for the what you want to access web sites. You will find them by using the PING command at the command prompt. Hold the Windows key and press R. Then type CMD and press ENTER. Then enter for example to get the address of the web site of MS PING WWW.MICROSOFT.COM.
Unless otherwise directed by your Internet service provider, you want TCP/IP settings to "obtain an IP address automatically" and "Obtain DNS server address automatically". To do this click Start-> Control Panel-> Network Center and sharing-> view status.
Then click on properties.
From there, click on Internet Version 6 Protocol and properties.
Click on the two radio buttons to "obtain an IP address automatically" and "Obtain DNS server address automatically". Click OK.
Then click Internet Version 4 Protocol and make the same changes in what concerns the version 6.
I hope this helps. Good luck.
Good luck.
-
IPad was working fine, but I've updated to 9.3.4. Now Wireless does not work. Shows connected to the router, but nothing happens, but say unable to connect to the server, error trying to access the internet or by mail. Also turn continuous flashing VPN gray to green, then again, but we have never set up a virtual private network. Don't know if it is connected. Have you tried
1 disconnection / reconnection to 2 routers that work very well for other devices
2 reset wireless via settings > general > reset > reset network settings and then hang up again
3 airplane mode on, wait a few minutes, then shut off again
Overall, the router will connect to any time, we put the password, but there is no transfer of data. 3 other devices work fine with the router. Don't know where to go from here, or if it is possible to back out from the upgrade. Anyone else having this problem? A research increase the same problem.
Thank you
Anything that causes the problem is not specifically 9.3.4, which fixes just a security breach. Have you tried to restart routers?
-
Why my internet has stopped working
My computer says that it is connected to the internet but the HTTP 500 Internal server Err error rises. How I get working again? I have another computer in the House and that works very well.http://support.Microsoft.com/kb/321448
In some cases, you must remove the cookie as well. -
my laptop connects to the router but said validation of identity and remains in this mode
using windows XP my laptop connects to the router but I preserve identity validating is... can help you?
This probably means that your WiFi has become misconfigured.
- Open network connections (start > run > ncpa.cpl > OK)
- Right-click on your wireless adapter icon and select "Properties".
- Click the "Wireless Networks" tab.
- In the list of "Preferred networks", select the entry that corresponds to your router, click 'properties '.
- Click on the tab "authentication." At this point, you should see a screen like this
- Uncheck the box at the top that says: "authentication Enable IEEE 802. 1 x for this network. "
- OK your way out.
-
I am connected to the internet, but it is said in the toolbar not connected and connections are available. There is only 1 link and I'm connected to it. How can I change display green bars, instead of grey bars with a yellow star?
As the title says.It's weird, and I think that this is the reason why some of my programs connect properly?Does anyone have a solution to fix this problem?Hi DamienDwyer,
1. are you referring to the status of job internet bar?
2 when the problem started?
3. have you made changes on the computer recently?Method 1
Try troubleshooting of network running.Use Network Troubleshooter event logs to solve network problems
http://Windows.Microsoft.com/en-us/Windows7/use-Network-Troubleshooter-event-logs-to-solve-network-problemsMethod 2
check the status in safe mode with network and display the results.Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-modeMethod 3
I suggest you try the steps from the following links:Windows wireless and wired network connection problems
http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-WindowsWireless network card: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/wireless-networking-frequently-asked-questions -
I have a Dell Inspiron N4110 and it tells me im connected to the inernet but I can't go online and for some programs, like steam for example, says that I have to connect to the internet. the only thing that I can open is Windows 64 bit, but I can't really do anything. When I try to do a syestem restore it tells me disk error C. Then I do a check disk. but that tells me error and do a system restore. Please help me boy Im only A 14 year HELP!
-Thank you
Cam
Hello Cam,
Welcome to the Microsoft community.
I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.
· What is the exact error message you get on the computer?
· Were there any changes made on the computer before the show?
Follow these methods and check if that helps:
Method 1:
Step 1:
Check if you have the similar problem in safe mode with network, otherwise you can try to put your computer to a State of clean boot in normal mode and check if it works:
Start your computer in safe mode with networking
http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
Step 2:
Follow the article to perform the clean boot on the computer:
How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7
http://support.Microsoft.com/kb/929135
Warning: After using the boot is a way to solve your problem step 3 follow-up to reset the computer to start as usual.
Method 2:
I suggest you to optimize Windows 7 for better performance and check if it helps
Optimize Windows 7 for better performance
http://Windows.Microsoft.com/en-in/Windows7/optimize-Windows-7-for-better-performance
Please follow all the steps and if the problem persists, return back and we will be happy to help you.
-
I can't load ios9.3. I get a message that I am not connected to the Internet, but I check and I am connected.
Apple pulled 9.3 for some devices due to problems.
Just wait and try to come back later.
-
wireless problem
just installed a vigin superhub my portable computer that has a network adapter and connected to the hub, but I get the message cannot connect without a certificate, any siggestions would be welcomeTomHello, Bill Bates,.
I would say to contact support with their router blank: -
Connected to the Internet, but Internet Explorer and Firefox do not work.
So this happened for a few days now and I have no idea what to do. My internet explorer and firefox do not work, but I don't know that I'm connected to the internet. I have reset the router, tried to use internet explore (no add-on) and still nothing works. My girlfriends computer connects to firefox, but mine does not. Any advice will be otherwise I give up on the building of the internet.
Hello, Harrison
Do you have any other security software installed previously?
David
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
Maybe you are looking for
-
I don't have the option in my settings slide to unlock rather than use the button "home" since ios10
Hi I have an iphone 5 and I changed to ios10, but I don't like just press the home button to unlock the phone because I was just used to drag the screen. But when I go into settings > general > accessibility > "home" button is not the option press on
-
Impossible to update Safari to the latest possible version of Mac OS x Lion
Hi guys,. I've recently upgraded to Lion 10.7.5 - no Snow Leopard; recently installed in a fresh, empty SSD through SATA cable to a Macbook Pro under Snow Leopard (so I don't have to worry about the old legacy Snow Leopard / unwanted system files pot
-
[Need help] Device name: laptop touch screen, Energy Star, 15. Model number: 15 - f023wm Device status:[Grandma] "I broke the internet.[Me] "No, I have demolished just any chance I had as a computer programmer.I'll never do it to heaven now... » You
-
SSRS for lack of outer join with the Oracle data source
It seems to be a problem with the Oracle driver used in the Reporting SERVICES query designer. When you use an Oracle data source, if I create an outer join in the graphic designer, it automatically inserts '{OJ' before the join and '} ' after her.
-
B209a Solution Center has NO text using Windows XP
Help! I spent HOURS reading post, internet suggestions and nothing worked. Have Photosmart B209a runs on Windows XP Pro (32). Everything works except the "Solution Center" (which I do need) has no text but it has background and icons, etc. After cros