Change according to the instructions of vmware tomcat http port, still gives error
According to this doc, Centre of Documentation of vSphere 5.5 I should be able to change the tomcat port http. But once I do, I see the errors below. I guess there are other conf files to change, but I can't find those who. I need to change the port to something else than my failure to support another agent of products I need on the vcenter server.
Impossible to recover data on the health of https://localhost:443/VSM/health.XML
Impossible to recover data on the health of https://localhost:443/EAM/eamService-Web/health.XML
Thanks for the reply. After working with support and troubleshooting a bit to mine, vmware help has found a workaround.
I stopped the services of vcenter server and Web services.
I changed the port 8082 to meet my needs in the bio line - vmssl.http.port = 8082 in the file C:\Program Files\VMware\Infrastructure\tomcat\conf\catalina.properties
VMware support also noted this line in that same case, bio - vmssl.https.port = 8443
We changed the 8443 port to meet my online "
We changed the 8443 port to meet my online "
I changed the port 8082 in line I started the server vcenter and webservices. Then I start the service in a conflict that also used the port 8081, I have since the change of port 8082 in my configuration of vcenter. In my case, port 8081 used for communication of McAfee Agent throughout our whole environment. After all this, no error is reported by the vcenter service monitor, and I can hit the URLS of health via a browser and get a valid answer.
Tags: VMware
Similar Questions
-
I upgraded to Keynote 6.0 and now have a new logo to Keynote 6.0 in my Dock and a Keynote 5.0 Logo in the Dock. Tried to drag the logo 5.0 on the dock does not work according to the instructions. Comments?
If you have any documents open in Keynote 5 then you will not be able to drag it to your Dock. IF a right-(control) - click the Keynote icon 5 shows Quit in the drop - down and then select Exit. Now you should be able to slide your dock.
It is often necessary to drag it from the dock, drag the icon quite some distance from the dock (to what the REMOVAL appears on the icon).
You can also right-(control) - click the icon select Options, and then, in select Options remove the dock.
-
Original title: sim set up
I have acquired a dell inspiron duo and have place the sim card in the back according to the instructions, but can't make it work
Hello
You can buy a WWAN card to use a SIM card. You should also call your mobile service provider and check with them.
Similar question has already spoken here: http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/how-to-make-the-sim-card-work-in-studio-15-dell/4507610a-e4aa-4bfd-9e94-ed71a60ad550
-
Hello
Today, I installed a new HP 564 Black XL cartridge in my Photosmart 5220 according to the instructions.
Since then, I cannot print in black and white and the pages come out blank.
Can anyone suggest how to fix this?
Thanks in advance
The document here can help solve the black does not print on your Photosmart 5520. Be sure to check the vents, as on the three solution.
-
I joined CC and downloaded LR and PS according to the instructions connected to my adobe account. But it has downloaded a trial expired a 29 day trial of the PS and LR. What have a done?
Hello
Please see the below help documents:
Applications creative Cloud back in test mode after an update until 2015 for CC
Kind regards
Sheena
-
I was working on a scenario week last on my PC at home. Yesterday, I tried to loggin to my work computer, and I was asked to reset my password before continuing. I did it according to the instructions, but when I was able to access the history, I found that my script is not there. How can I get it back?
Looks like you worked in the desktop application in the history of offline through your PC at home.
You can check by logging into the desktop app from your home PC and checking if the word "offline" appears after the name of your account at the top right of the story.
If that's true then please switch to online mode.
-
ZoomSearch question of integration according to the instructions of Peter.
Hello:
I use Peter instructions for integration ZoomSearch in RoboHelp 6. However, I use the version of ZoomSearch CGI.
1. what file import for method 1? Peter uses 'search.html', but the CGI 'search.html' version has 0 KB. In other words, it contains no code! I can import "search_template.html", but I get a blank when I see it in the published help. This is because what is necessary to see that the search page is 'search.cgi '. However, I can't import NON-HTML files in RoboHelp. What and how to import? I tried to import 'search_template.html', but I am still getting a blank page in the published help.
2. in addition, in skin edit mode, ZoomSearch button should point to 'search.html' according to the instructions of Peter. As above, I would like to point to 'search.cgi', but I can't point to NON-HTML files. What should I do?
Should I go ahead and manually update the relevant references to the 'search.cgi' in the published help?
Thank you
KManual update of the reference to 'search.html' 'search.cgi' in whskin_tbars.htm solved the problem.
Kind regards
K -
I did according to the instructions RE: cut and paste, still does not work.
This is what is shown as my profile directory
/Home/davidlisle/.Mozilla/firefoxsa4u14wa.default-1390261301661It's the user.js, I created in accordance with the online instructions page:
// This file can be used to configure global preferences for Firefox // Example: Homepage pref("browser.startup.homepage", "http://www.linkedin.com/"); user_pref("capability.policy.policynames", "allowclipboard"); user_pref("capability.policy.allowclipboard.Clipboard.cutcopy", "allAccess"); user_pref("capability.policy.allowclipboard.Clipboard.paste", "allAccess");
However, the data but followed instructions do not produce the expected results.
Right now I see myself forced to use another browser as I work a lot on the line and I 'should' be able to copy / paste. If you can respond in a timely and a solution, I'll continue with firefox, I like. Otherwise, my frustration level has peaked and interest in firefox is rapidly declining.I should be able to accomplish this task with simple steps, not an eternity of troubleshooting your installation bad 'protection '. I am equally sure that many others have no problem, I do however.
I have provided some basic information about this machine, if you need something specific, I'm sure I'll be happy to hand it to you.
MemTotal: 4130948 kB MemFree: 1416364 kB Buffers: 400032 kB Cached: 1253676 kB SwapCached: 0 kB Active: 893300 kB Inactive: 1373268 kB Active(anon): 579364 kB Inactive(anon): 70528 kB Active(file): 313936 kB Inactive(file): 1302740 kB Unevictable: 40 kB Mlocked: 40 kB HighTotal: 3278664 kB HighFree: 1359244 kB LowTotal: 852284 kB LowFree: 57120 kB SwapTotal: 107853432 kB SwapFree: 107853432 kB Dirty: 92 kB Writeback: 0 kB AnonPages: 612904 kB Mapped: 166476 kB Shmem: 37032 kB Slab: 379232 kB SReclaimable: 361112 kB SUnreclaim: 18120 kB KernelStack: 4112 kB PageTables: 11556 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 109918904 kB Committed_AS: 3050400 kB VmallocTotal: 122880 kB VmallocUsed: 87464 kB VmallocChunk: 23508 kB HardwareCorrupted: 0 kB AnonHugePages: 0 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 2048 kB DirectMap4k: 10232 kB DirectMap2M: 903168 kB XXX ******************************************************************************************************* Version: Linux version 3.11.0-15-lowlatency (buildd@batsu) (gcc version 4.8.1 (Ubuntu/Linaro 4.8.1-10ubuntu8) ) #8-Ubuntu SMP PREEMPT Sun Dec 15 21:38:27 UTC 2013 ******************************************************************************************************* cpuinfo: processor : 0 vendor_id : AuthenticAMD cpu family : 18 model : 1 model name : AMD A6-3500 APU with Radeon(tm) HD Graphics stepping : 0 microcode : 0x3000027 cpu MHz : 800.000 cache size : 1024 KB physical id : 0 siblings : 3 core id : 0 cpu cores : 3 apicid : 0 initial apicid : 0 fdiv_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 6 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc nonstop_tsc extd_apicid aperfmperf pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt arat cpb hw_pstate npt lbrv svm_lock nrip_save pausefilter bogomips : 4189.23 clflush size : 64 cache_alignment : 64 address sizes : 40 bits physical, 48 bits virtual power management: ts ttp tm stc 100mhzsteps hwpstate cpb processor : 1 vendor_id : AuthenticAMD cpu family : 18 model : 1 model name : AMD A6-3500 APU with Radeon(tm) HD Graphics stepping : 0 microcode : 0x3000027 cpu MHz : 800.000 cache size : 1024 KB physical id : 0 siblings : 3 core id : 1 cpu cores : 3 apicid : 1 initial apicid : 1 fdiv_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 6 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc nonstop_tsc extd_apicid aperfmperf pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt arat cpb hw_pstate npt lbrv svm_lock nrip_save pausefilter bogomips : 4189.23 clflush size : 64 cache_alignment : 64 address sizes : 40 bits physical, 48 bits virtual power management: ts ttp tm stc 100mhzsteps hwpstate cpb processor : 2 vendor_id : AuthenticAMD cpu family : 18 model : 1 model name : AMD A6-3500 APU with Radeon(tm) HD Graphics stepping : 0 microcode : 0x3000027 cpu MHz : 800.000 cache size : 1024 KB physical id : 0 siblings : 3 core id : 2 cpu cores : 3 apicid : 2 initial apicid : 2 fdiv_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 6 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc nonstop_tsc extd_apicid aperfmperf pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt arat cpb hw_pstate npt lbrv svm_lock nrip_save pausefilter bogomips : 4189.23 clflush size : 64 cache_alignment : 64 address sizes : 40 bits physical, 48 bits virtual power management: ts ttp tm stc 100mhzsteps hwpstate cpb ******************************************************************************************************** version_signature: Ubuntu 3.11.0-15.8-lowlatency 3.11.10 ******************************************************************************************************** meminfo: MemTotal: 4130948 kB MemFree: 1416364 kB Buffers: 400032 kB Cached: 1253676 kB SwapCached: 0 kB Active: 893300 kB Inactive: 1373268 kB Active(anon): 579364 kB Inactive(anon): 70528 kB Active(file): 313936 kB Inactive(file): 1302740 kB Unevictable: 40 kB Mlocked: 40 kB HighTotal: 3278664 kB HighFree: 1359244 kB LowTotal: 852284 kB LowFree: 57120 kB SwapTotal: 107853432 kB SwapFree: 107853432 kB Dirty: 92 kB Writeback: 0 kB AnonPages: 612904 kB Mapped: 166476 kB Shmem: 37032 kB Slab: 379232 kB SReclaimable: 361112 kB SUnreclaim: 18120 kB KernelStack: 4112 kB PageTables: 11556 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 109918904 kB Committed_AS: 3050400 kB VmallocTotal: 122880 kB VmallocUsed: 87464 kB VmallocChunk: 23508 kB HardwareCorrupted: 0 kB AnonHugePages: 0 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 2048 kB DirectMap4k: 10232 kB DirectMap2M: 903168 kB
Edit: deleted email from the public view. (philipp)
You need these lines in user.js allow the site www.linkedin.com access the Clipboard:
user_pref("capability.policy.policynames", "allowclipboard"); user_pref("capability.policy.allowclipboard.Clipboard.cutcopy", "allAccess"); user_pref("capability.policy.allowclipboard.sites", "http://www.linkedin.com/");
Use keyboard shortcuts if the buttons on the web page or other methods do not work.
- Copy: Ctrl + C or Ctrl + insert (Mac: command + C)
- Paste: Ctrl + V or shift + insert (Mac: command + V)
- Cut: Ctrl + X or shift + delete (Mac: command + X)
-
Product name/number - Deskjet 1000 printer J110 Series
Operating system - Windows 7
No error message, I can't get there
No changes, he just arrived by mail
The installation sheet says to remove the ink cartridges before pushing the transparent tape.
There is a clear pink band which I couldn't remove a little bit of a corner and have toner all over the fingers to do. The band is perhaps too dry, be flexible, but I can't do it. What can I do?
I have not tried the printer connected to my computer again, because I did not get that far in the installation instructions.
Hi gmaharriet,
Looks like that you actually remove the strip of copper flex of the cartridge. Remove more of the band with blue or pink tab is not covered by the warranty of the cartridge. You will need to purchase a new cartridge to complete the setup of the printer. Take a picture of the cartridge and then attach it to this post.
Please see the following for a good removal of the protective film.
-
PROBLEM 1:
I have Win. HP Pavilion s3300f 32-bit, Vista. Win. Movie Maker removes my pictures and videos, and leaves a red x. navigation for them always fails and waste my time for them sin. When I find them Win. MM does not accept some of them after I import and then drag them to the table of Storyboard. The next time I launch W.MM. some of them may have disappeared or new disappeared!PROBLEM 2:
Also, OVERLAY TEXT, my title is long 6.7 seconds and I want to wish 36 seconds but it does not work. MS Win. MM instructions: "(to CHANGE TITLE DURATION: 1 Select title)(TIMELINE 2) - change (HOW do we DO THAT?)" Before editing, I clicked on the first clip in Storyboard, where I want to start. (3) "DRAG THE END TRIM HANDLE TOWARD THE END OF THE TIMELINE. There is no handle trim, only a blue fill line or a blue vertical line with a PIN double on both ends.Help, please! I have to do something terribly wrong.
I can only imagine you run Vista Movie Maker 6.
Question about ISSUE 1...
Where have you saved pictures? They are in a folder on your primary hard drive?
The red Xs appear generally when photos have been moved, deleted or other.
Unavailable wise to Movie Maker.Answer to problem 2...
Choose Calendar view...
At the bottom of the screen, you should see the track "Title Overlay"...
If you place your pointer over the edge of the title... you should see a red double arrow...
Click left/dragging this arrow will change the duration of the overlay.You should see a ToolTip that diaplays the change you drag the handle trim.
Also... the titles can be repositioned on the overlay of the title track by clicking left/drag the
the hand symbol that appears when you rest your pointer on the title...The music files on the audio / music work the same way.
-
The menu system default language does not change according to the location that uses in-app
Hello
I have an emergency in application if you can reply me as soon as possible.
In fact, I've implemented localization in application for Os 5.0 for 7.0.But, I extract some problems on specific devices so can you help me out for short.
My problem: -.
I use both languages in my application 1. Netherland and 2. English.
Then 2 type of different scenario produced
1. whenever the user change language of application at this time menu default language (Close, keyboard and Application Switch) no change. These are the ways that they change language according to the language of the camera. But this problem go get some specific device as 9850 for Os 7.0 and 9300 for Os 6.0.
2 even conducted no user in another device like 9300 Os 5.0,8900 Os 5.0,9800 Os 6.0, 9900 Os 7.0 and Os 7.0 9320 ect... When this default menu (Close, Application Switch) changing the language according to the language of demand. These are the ways that they do not change language according to the language of the camera.
Hello
It's the Os.
I confirm with the BlackBerry support team.
-
Photoshop 7.0 version worked. Since the last round of updates, now DEP is prohibiting its launch. Following the instructions online to allow certain programs to be exempted from DEP is not no longer works. Program in the list do not use DEP profile but doesn't always open.
Hello
You can read these articles and check if that helps.
Data Execution Prevention: Frequently asked questions: http://windows.microsoft.com/en-us/windows-vista/data-execution-prevention-frequently-asked-questions
Change Data Execution Prevention settings: http://windows.microsoft.com/en-us/windows-vista/change-data-execution-prevention-settings
What is Data Execution Prevention? : http://windows.microsoft.com/en-us/windows-vista/what-is-data-execution-prevention
Why Windows close my program? : http://windows.microsoft.com/en-us/windows-vista/why-is-windows-closing-my-program
Thank you.
-
Camcorder to one of the ports usb gives error code 43
Original title: when I try to connect my camcorder to one of my usb ports it gives me an error code 43? How can I solve this
I'm trying to connect my camcorder Panasonic HDC - HS250 HD for my dell inspiron with windows 7. It comes up with an error code 43? How can I connect my camcorder?Hello
1. don't you make changes on the computer before the show?
2 is the issue limited to camcorder Panasonic HDC - HS250 HD?Error code 43 is an error in Device Manager which means the following:Windows has stopped this device because it has reported problems. (Code 43)Method 1:
You can try the steps in the link and check.
Tips for solving problems of USB devices
http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices
Method 2:
You can update the drivers for the device on the manufacturer's Web site.Updated a hardware driver that is not working properly
http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctlyReference links:
Install a USB device
http://Windows.Microsoft.com/en-us/Windows-Vista/install-a-USB-deviceGet help with Device Manager errors
http://Windows.Microsoft.com/en-us/Windows-Vista/get-help-with-Device-Manager-errors -
(Sorry I seem to have accidentally pressed on enter...) My Library Caches file does not contain an adobe folder. What is the cause of my problems open Lightroom? and if so, how to fix?
Thank you very much
(Sorry for the disjointed text character).
Dan
See answer #7 here: Re: update on CC (for PS, LR and bridge) online and met a permissions problem with LR on three dossiers?
-
Firefox crashed while refreshing but created a folder "old data of firefox. I have so I restarted and then deleted reinsalled firefox. I'd like to have my old favorites available have tried the info on help with copying the files between the profiles but does not seem to work. I can access the old and the new profile, but when I right click on Places.sqlite on the old profile and select copy, then there is no paste option on new file. I'm not computer literate and an ODP so would like to simple step by step instructions. Any help would be appreciated. Thank you.
You can try to restore a .jsonlz4 compressed in the bookmarkbackups folder in the "Old data Firefox" folder on the desktop in the current profile.
- Bookmarks > show all bookmarks > import and backup > restore > choose file
Maybe you are looking for
-
Application of new S6 download whatsapp for c/c more details
Hello I just bought myself an iphone for the first time. I had whatsapp on my samsung. I tried to download the free whatsapp on the S6, but he asks banks for details through i-tunes shop...? the bank details on the i-tunes are outdated and it won't a
-
source of the message appear on responses
Messages suddenly started to display source X-key account information and any other ID of Message, User Agent, etc.and when I try to reply to a message it shows all the information of the source before the message. How can I hide all this information
-
How to manage address booksStaff collected vs. Where should I keep the addresses? Seems when I put the address in one he goes to the other as well.
-
Why is my old e-mail address always be associated with my sent mail?
I migrated to clearwire to gmail and I want to continue to use Thunderbird. I created a new gmail account in Thunderbird. I closed Thunderbird and reopened. When I create a new email via Thunderbird address OF sender indicates the following: userid@g
-
After losing the 2 screws on the lower back, it still seems glued to the front. Thanks in advence for your help.