Change backuppiece RMAN location

Similar Questions

• No option to change the installation location of the program

  Hello

  I have problems with my laptop running Vista Basic.

  Whenever I try to install a new program, it automatically starts the installation on drive C.  There is no opportunity to change the installation location.  It must now to the point where drive C is almost full yet D drive is almost empty.

  Is it possible I can get Vista to start giving me the option to choose where I would like the installation to occur or may simply change the default location?  I don't have a problem with the deletion of all programs that are running on my laptop that I have all the disks necessary to reinstall, I just can't continue as things are.

  Any help would be appreciated.

  Andy

  If you get a choice of the place where the software is the responsibility of the installer, no windows.  I would say it's time to start looking in an upgrade of the hard drive if you are running this short space.

  "AndyCop" wrote in the new message: * e-mail address is removed from the privacy... *

  Hello

  I have problems with my laptop running Vista Basic.

  Whenever I try to install a new program, it automatically starts the installation on drive C.  There is no opportunity to change the installation location.  It must now to the point where drive C is almost full yet D drive is almost empty.

  Is it possible I can get Vista to start giving me the option to choose where I would like the installation to occur or may simply change the default location?  I don't have a problem with the deletion of all programs that are running on my laptop that I have all the disks necessary to reinstall, I just can't continue as things are.

  Any help would be appreciated.

  Andy

• Where are offline files stored (to be synchronized)? Can we change the default location?

  Dear
  I use Vista Ultimate.
  Where are offline files stored (to be synchronized)? Can we change the default location?
  concerning
  Maurin

  Hi Maxim P,.

  Sync Center is the place to go to synchronize your computer with network folders, mobile devices and compatible programs. Sync Center can keep automatically your files and folders synchronized in different places.

  Open Sync Center by clicking the Start button, tap all programs, accessories, and then clicking on of Sync Center.

  Sync Center is a feature of Windows that allows you to keep information synchronized between your computer and files stored in folders on network servers. They are called offline files because you can access them even when your computer or the server is not connected to the network.

  You can see the link below for more information about changing the location of the CSC files.

  How to change the location of the CSC folder by configuring the CacheLocation registry value in Windows Vista

  http://support.Microsoft.com/kb/937475

  For more information, see work with network files when you are offline.

  See the links below for more information on synchronization.

  Sync Center: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/Sync-Center-frequently-asked-questions

  How to maintain your information is synchronized

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-to-keep-your-information-in-sync

  Sync Center: recommended links

  http://Windows.Microsoft.com/en-us/Windows-Vista/Sync-Center-recommended-links

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• Impossible to change the network location of the public in the network and sharing Center.

  I'm unable to change the network location of the public to the private sector or at home. In network and sharing Center, he is listed as unidentified network, and under "Public network" is written in black and is not clickable.

  I have a connection high speed (USB connected) also listed above under "Home network", it is written in blue and is clickable.

  The affected connection is an XBOX 360 connected via a network cable. I wish to connect the XBOX to the Internet via ICS, but cannot do so until this connection is either private or at home.

  Things I've tried so far;

  Reinstall the drivers,

  disconnect and reconnect, turning on all the elements concerned.

  All ideas,

  Tourist shifty.

  Enable ICS on the connection Strip and not on the XBOX 360 connection.  When you do this, the connection of the XBOX 360 will still be confused with a public network, but everything should work. Boulder computer Maven
  Most Microsoft Valuable Professional

• Change the installation location of many programs?

  I just got an SSD (60 GB) to use as my drive master boot and after doing some research, it became clear that changing the progamfilesdir /(x86) registry entries can cause problems with some programs and Windows update.

  A lot of programs that I use allow me to change the installation location, but some do not. Is there a method to move these programs or make install in another directory?
  Thank you.

  Even if you custom install on a drive to reactivate, a lot of files will be written on the disc of the victory.

• Accidental licensure during the change to save location

  I am a new user of Adobe Stock and I faces a similar situation on the forum post detailed here:

  New user Adobe Stock photo licensed accidentally (but it did not download).

  I was trying to change the recording location of stock adobe on my creative cloud drive and not my computer.  I don't know what happened, but rather than to change the location, the refreshed and browser says that I bought.  I have not download or intend to use.  The ID of the element is 88829678.

  I would appreciate your help.  Thank you!

  Hello

  I added a credit to your account to replace the one authorized by mistake.

  Kind regards

  Bev

• Change the default location for saving the photos in 10 items.

  How can I change the default location for saving images for the first time in 10 items? For some reason, the program is saving my work in the Temp folder, when I need the work in the library of images.

  From the Organizer, go to:

  Edit > preferences > files

  Click on the Browse button and navigate to your pictures folder

• Change automatic save location

  Adobe is back with a fix for this yet? The only thing you can do is to turn auto-save on or off, but not change the default location. It makes no sense to have a car to save in the same folder as the project file.

  Its always been there, but if you want it changed:

  http://www.Adobe.com/cfusion/mmForm/index.cfm?name=wishform

  It is wise to also save a copy on another player, that's what I do.

  I do not relay on auto save as its get crushed after so many times.

• How can I change my creative location of download for Cloud applications?

  I signed up for creative cloud and uses the Adobe Application Manager to download and install apps.  The client allows me to change the installation location, but not the download location.  I have limited space SSD for my C: drive, then it is a problem.  Is there a setting somewhere that I can change the configuration file?

  Change the system variable 'temp' path, which is what I always do, in any case. Now your precious SSD is already filled with temporary files that feed on your space, if you haven't changed that already...

  Mylenium

• Change the default location of the Connections folder

  When I do a MySQL connection in Dreamweaver it automatically performs a folder called connections on the top of my site. I wish I had the Connections folder to my includes folder. Is it possible to change the default location of the Connections folder?

  Unfortunately, this file cannot be moved.

  Randy

• JMS transport - weblogic changes < SOAP: address location = "jms:... for http"

  Hello
  Please help me to configure the web service to use only jms transport.
  I try to create the web service that uses JMS transport.
  I started from WSDL where I placed two items:
  < style: = 'document soap binding '.
  transport = "http://www.openuri.org/2002/04/soap/jms" / >
  
  and
  
  < soap: address location = "jms://host:7041/contextPathName/serviceUriName? URI = queueName"/ >
  
  Then in the implementation of the service web, I placed after the annotation:
  @WLJmsTransport (= "contextPathName" contextPath, serviceUri = "serviceUriName", portName = "portName", queue = "queueName", connectionFactory = "connectionFactoryName")
  
  Deployment was successful but when I look at the generated WSDL (Admin console) I see that weblogic has changed < soap: address location = "jms:... for < soap: address location ="http... "
  And when I look at the tracking I see port uses JMS transport.
  When I try to test my service using the client to Test the Admin console I see that the queue is not used (Admin console/monitoring/Messages total is always 0) and (I assume) service uses http transport.

  Hello
  Please change "http://www.openuri.org/2002/04/soap/jms" to http://www.openuri.org/2002/04/soap/jms/ for soap1.1 or http://www.openuri.org/2002/04/soap12/jms/ for SOAP 1.2.

  There must be an incompatibility between code and implementation.

  -LJ

• change the archivelogs location

  Hi guys, I have the main and backup database. I made them with rman, and when I have enough changes based on data creates arc on the primary database files /opt/app/oracle/flash_recovery_area and send the CRA files on standby database/opt/app/oracle/flash_recovery_area.

  on the two database db_recovery_file_dest = ' / opt/app/oracle/flash_recovery_area ' and log_archive_dest_1 =' location = use_db_recovery_file_dest'

  
  

  it's all good and well and it works perfectly, but now I want to do this arc file on another drive on my linux system(so that database could work faster and because of memory). I want to arc files to create primary/opt1/archive_log and Eve/opt1/archive_log.

  so, how do I do that?

  
  

  I tried to simply change db_recovery_file_dest = ' / opt1/archive_log ' on both my databases, he had it changed, I could see it on the Show parameters command, but it did not work, when I tried to change the system switch logfile, command has not completed and I was unable to see the log files or databases;

  
  

  then I tried to leave even db_recovery_file_dest and modified log_archive_dest_1 = ' location = / opt1/archive_logs ' on two databases, but the result is the same, do not stop and I can't see arcs in the primary or standby so what do I do?

  I tried closing databases and remake primary@standby contact if rman with the settings already corrected, but it still does not work... Please answer...

  
  

  Can connect as sysdba before primary and vice versa (if it's not working, you must resynchronize orapw - password files)

• RMAN - location on the backup disk full

  Hi guys, I have problem with RMAN backup of some databases is strongly exploited during a day. We have storage problem (disk backup destination) when you do the backup of it. I would like to change retention for this database from 2 to only 1 day because these disk backupsets heading a tape every night. But before I do that, I need free space on the backup disk that is almost 100% full.
  
  So my question is possible to delete old backup sets and continue the backup operation? If this is the case, I could just delete backupsets of RMAN, simply delete all backups of full disk location and simply take the new backup?
  
  I use this script to do the full backup:
  
  target connection.
  
  Run {}
  cross-checking of backup;
  obsolete report;
  delete noprompt obsolete;
  delete expired backup noprompt.
  backup database more entered archivelog delete;
  obsolete report;
  delete noprompt obsolete;
  delete expired backup noprompt.
  cross-checking of backup;
  }
  
  "exit";
  
  Published by: rootsman Sep 14, 2011 23:51

  Rootsman wrote:
  I'm sorry that I forgot to put numbers's database version 10.2.0.3 on RHEL4 OS 64-bit.
  I would like to delete the backup more to buy disc because this database uses disk storage space, and is to develop the database so therefor I decide to do in this way.

  Could you please give me a link or try to explain how to remove the backupsets that I have on the storage of full disk and continue with the operation to bakup? IM new in RMAN and I want to make sure that I'm doing the correct things.

  Thank you!

  According to my understandig of your question... you want to remove the last backup because you save it to tape. If it is problem, then remove the rman backup.

  RMAN > delete noprompt backup; and continue the backup for the next days

  RMAN > run {}
  backup database archivelog;
  delete noprompt obsolete;
  }

  I hope this help you :)

  Neeraj-

• How can I change the default location to save to SD card?

  I was looking for an answer in the forum, but nothing helped. Anyone knows how to save SD location and not the internal memory?

  I think that it worked for most users:

  (1) open a new tab to Subject: config (type about: config the Awesomebar and hit the arrow go or tap Enter).

  You can bookmark it for easy future access.

  (2) on the search line, type down and make a pause while Firefox filter list

  3 scroll to browser.download.folderList and tap to display the editing controls. Change the value from 1 to 2 (from 'by default always' to the 'last used folder').

  (3) press the big "+" above the list to add a new parameter

  (A) from the right side, you see "Boolean" type who and change to "String".

  (B) the name of the preference should be browser.download.dir (this option stores the last used directory)

  (C) the value is based on the folder you want. For example:

  /sdcard/FxDown
  

  Then click on create.

  If you go back to your other tab and download something, it should go to the new folder.

  Success?

• Is it possible to change the default location where Firefox stores its profiles and browsing history

  Normally the profiles and browsing history stores in %APPDATA%\Mozilla\Firefox

  Now, I want to change the location somewhere ("like in the office"), even during installation or after the installation of Firefox.

  Can someone help me...

  Thanks in advance...

  Mickael Kuramala.

  Hello Michael, you can use the Profile Manager to create a new profile in a custom location. more information is available to use the Profile Manager to create and delete profiles Firefox.