Change code in AS2 and AS3

Similar Questions

• AS2 and As3 on same Flash Player

  If I put some AS2 code to play in Flash Player 9, it is possible that this swf can load an As3 swf to Flash drive uses As2 codes?
  
  These two sovereign wealth funds play in the same virtual machine which is player, version 9, but the other is coded with As2 and the other is coded with As3. How an AS2 can load a swf file coded in AS3 on the same Flash drive?
  
  Is this possible?
  
  If so, how? If not, why not?
  

  AS2 and AS3 SWF cannot exist in the same virtual machine Flash Player - each instance of Flash Player (version 9 and following) create address different areas/virtual machines because the requirements of AS3 and AS2 are so different.

• I have Apple TV gen 1. I changed my iTunes password and now I can't the Apple TV in the House. It will connect to iTunes. I type my Apple and a new password. My phone Gets a text with a verification code, but the Apple TV says wrong user

  I have Apple TV gen 1. I changed my iTunes password and now I can't the Apple TV in the House. It will connect to iTunes. I type my Apple and a new password. My phone Gets a text with a verification code, but the Apple TVsaybadusername password or.

  Your ATV1 has an old software system not updated for years.  You have 2 factor (6 digits) or authorization of step 2 (4 digits) enabled for your Apple account.  Here are the characteristics of the latter.  I disable these on your Apple account and try again.

  For Apple ID - Apple Support two-factor authentication

  Frequently asked questions about the audit in two steps for Apple ID - Apple Support

• I changed the hard drive and was invited to provide an activation code in order to achieve the functioning of the operating system

  I had problems with my PC which is an old, 2003 E - business machines, I changed the hard drive and was invited to provide an activation code in order to achieve the functioning of the operating system, it is the third time that I had to do it in 2 years, a message came back to me that I could use this activation key which is Microsoft XP Home Edition... any suggestions I'm a student who can't afford to keep buying these keys to get my PC running, I have homework to fill out online... Please help

  Use telephone activation, say nothing, and you will possibly connected to a human being.  They should be able to sort out you.

• Hello, I recently created a website for a client. I also created a brochure with a QR code that automatically redirects visitors to a single page in the site. Well, I had to make changes to the site and I had to change the name of the page in which t

  Hello, I recently created a website for a client. I also created a brochure with a QR code that automatically redirects visitors to a single page in the site. Well, I had to make changes to the site and I had to change the name of the page in which the QR code pointing to. Is it possible to keep the current name of the page but create a page of automatic redirect named like the QR code? Basically, the brochures have all been printed already, so I need the QR code when analyzed in order to continue working. Now, it is not the case.

  Nevermind, I figured it. I've reproduced the page, renamed the QR that indicates the code of the page, and then he hid in the menu of page properties.

• Add more music and change the key track on flash and AS3

  I want to add more music that changes automatically changes to this code as well to create a button that manually changes the music forward and backward. How can I do?

  import flash.events.MouseEvent;

  var soundReq:URLRequest = new URLRequest ("Pehla Nasha_0.mp3");
  var sound: Sound = new Sound();
  var soundControl:SoundChannel = new SoundChannel();
  var volumeControl:SoundTransform = new SoundTransform();
  var resumeTime:Number = 0;
  Sound.load() (soundReq);
  sound.addEventListener (Event.COMPLETE, onComplete);

  playSound (null);

  up_btn.addEventListener (MouseEvent.CLICK, increaseVolume);
  down_btn.addEventListener (MouseEvent.CLICK, decreaseVolume);
  function onComplete(event:Event):void
  {
  play_btn.addEventListener (MouseEvent.CLICK, playSound);
  stop_btn.addEventListener (MouseEvent.CLICK, stopSound);
  
  }
  function playSound(event:MouseEvent):void
  {
  soundControl = sound.play (resumeTime);
  pause_btn. Visible = true;
  pause_btn.addEventListener (MouseEvent.CLICK, pauseSound);
  play_btn. Visible = false;
  play_btn. RemoveEventListener (MouseEvent.CLICK, playSound);
  }
  function pauseSound(event:MouseEvent):void
  {
  resumeTime = soundControl.position;
  soundControl.stop ();
  play_btn. Visible = true;
  play_btn.addEventListener (MouseEvent.CLICK, playSound);
  pause_btn. Visible = false;
  pause_btn. RemoveEventListener (MouseEvent.CLICK, pauseSound);
  }
  function stopSound(event:MouseEvent):void
  {
  soundControl.stop ();
  play_btn. Visible = true;
  play_btn.addEventListener (MouseEvent.CLICK, playSound);
  pause_btn. Visible = false;
  pause_btn. RemoveEventListener (MouseEvent.CLICK, pauseSound);
  }
  function increaseVolume(event:MouseEvent):void
  {
  volumeControl.volume = 1;
  soundControl.soundTransform = volumeControl;
  }
  function decreaseVolume(event:MouseEvent):void
  {
  volumeControl.volume = 0.1;
  soundControl.soundTransform = volumeControl;
  }
  pause_btn. Visible = false;

  Copy and paste the code that I have proposed.  change nothing except:

  newsound_btn

  to match your button that you want to use to play a new sound.

  p.s. Please check the useful/correct.

• AS2 to AS3 migration

  Hello
  
  I have this code in AS2:
  
  for (i = 1; i < = 4; i ++) {}
  hand. NAV ["bttn_" + i] .onRelease = function() {}
  for (i = 1; i < = 4; i ++) {}
  otherButtons = eval ("this._parent.bttn_" + i);
  var f: Fuse = new Fuse();
  f.easing = 'easeInOutExpo ';
  f.Duration =. 5;
  f.push ([{target: otherButtons.letters, dyed: 0xE64D38, %: 100}]);
  f.Start ();
  }
  var bttnNum = this._name.substr (-1, 1);
  var f: Fuse = new Fuse();
  f.easing = 'easeOutBounce ';
  f.Duration = 2;
  f.push ({target: this.letters, dyed: 0x35352F, %: 100, seconds: 0});
  f.push ([{target: main.loaderMC visible: false, seconds: 0}, {func:unloadMC, seconds: 0}]);
  f.push ([{target: main.loaderMC, visible: true, seconds: 0}, {func:loadMC, seconds: 0}]);
  f.Start ();
  function unloadMC() {}
  main.loaderMC.unloadMovie ();
  }
  function loadMC() {}
  main.loaderMC.loadMovie("SWF/ext_movie_"+bttnNum+".swf");
  }
  This.Enabled = false;
  lastClicked.enabled = true;
  lastClicked = this;
  }
  }
  
  That's what I have so far in AS3:
  
  Navigation buttons
  for (var i: uint = 1; i < = 4; i ++) {}
  hand. NAV ["bttn_" + i] .addEventListener (MouseEvent.CLICK, onClick);
  hand. NAV ["bttn_" + i] .addEventListener (MouseEvent.ROLL_OVER, onRollover);
  hand. NAV ["bttn_" + i] .addEventListener (MouseEvent.ROLL_OUT, onRollout);
  hand. NAV ["bttn_" + i] .buttonMode = true;
  }
  
  function onClick(e:MouseEvent):void
  {
  var bttnNum = parseInt (e.target.name.substring (5));
  
  var loadMC = function()
  {
  Loader.Load (new URLRequest("SWF/ext_movie_"+bttnNum+".swf"));
  }
  Tweener.addTween (["here I need reference the other buttons"] .letters, {_color:0x35352F, time: 5, transition:"easeInOutExpo"});})
  }
  
  Overview of the NAV buttons
  
  function onRollover(e:MouseEvent):void
  {
  Tweener.addTween ([here, I need button that is pushed reference] .letters, {_color:0x35352F, time: 5, transition: "easeInOutExpo"});
  }
  
  function onRollout(e:MouseEvent):void
  {
  Tweener.addTween ([here, I need button that came out of the reference] .letters, {_color:0x35352F, time: 5, transition: "easeInOutExpo"});
  }
  
  I suck on:
  (1) how to reference other buttons
  (2) how to reference the button that has been clicked/overturned
  (3) apparently at random external clip does not load (NaN traces)
  
  Very very new to Action script for AS3 in particular.

  Quote:
  1118 Implicit coercion of a value of Object type parasites for a flash.display.MovieClip type maybe irrelevant in activeButton = e.currentTarget;

  ActiveButton try: = MovieClip (e.currentTarget); -This assumes that your buttons are MovieClips. If this change is cast to MovieClip event target.

  Quote:
  1180 call to a method may be undefined, deActivateButton in deActivateButton (e.currentTarget);
  1180 call to a method maybe not defined activateButton in activateButton (e.currentTarget);

  Are all the pieces of code that you showed in the previous post you in the same category or frame? So, I guess.

  The error indicates that you did not deActivateButton and activateButton functions.

  These two functions have been shown to illustrate how these features can be centralized.

  given that they are supposed to be the methods of the class if you want to use this approach you declare these functions in the document class:

  private void activateButton (...)

  private void deActivateButton (...)

  Quote:
  In addition, in this piece: btn.addEventListener (MouseEvent.CLICK, onButtonClick); When comes btn?

  BTN is not - it is a propertyr that is passed into the function: function activateButton ( btn: MovieClip): void

• How the code root_go toAndPlay in AS3

  got a site that was in AS2 to AS3 is a code, I have a problem with and don't can't find the answer for, I got a movieclip in frame 1 of the original AS2 script. The clip at the end I had an action in the last frame of the mc _root.gotoAndPlay("home"), who, after the clipended, sent the main timeline to the hosting structure.

  I have the movieclip even in the main storyline in the resumption of the AS3 and want to know how to get the same result in AS3?

  ??

  rderd

  Try: MovieClip (this.root) .gotoAndPlay ('home');

  There is a better way to practice to do which involves no calls of root/parent, and someone can jump in to offer.  For now, the above offer is the quick solution and dirty that mimics the AS2 approach you described and answers the title question.

• change my phone number and cannot change the keychain

  Dear,

  gently, I changed my phone number and cannot change the keychain

  You try to make the change in the preferences/iCloud/Keychain/Options of the system? What happens when you try?

  City link below.

  • The device that uses the SMS compatible phone number you provided when you set up first iCloud keychain. A verification code is sent by SMS to the phone number. If you can not access this number, Contact the Support of Apple, which can verify your identity so that you can run the installer on your new device.

  Frequently asked questions about iCloud Keychain - Apple Support

• My Windows telling me that he needs 11 updates. These updates consistently fail and the Microsoft fix did not work. Error codes are 641 and 80070641

  My Windows telling me that he needs 11 updates.  These consistenly updates fail and the Microsoft fix did not work.  Error codes are 641 and 80070641.

  Hello

  Did you change your computer before this problem?

  You can follow the suggestions and check out them.

  Method 1

  You can follow the procedure in the article.

  How to resolve problems connecting to Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/818018

  Method 2

  You can reset the Windows Update components.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.
  Back up the registry
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 3

  You can download and run the system update readiness tool.

  Description of the update tool of the system to Windows Vista, Windows Server 2008, Windows Server 2008 R2
  http://support.Microsoft.com/kb/947821

  Method 4

  Step 1:

  Place the computer in a clean boot state.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a troubleshooting follow step 7: reset the computer to start as usual

  Step 2:

  You can manually download and install updates from Microsoft Download Center.

  Microsoft Download Center

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 5

  You can disable temporary of your security software.

  Disable the antivirus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks

  See also:

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

• Hardware change - inform them where and what are the details to be informed

  Hello!

  I want to use my hard drive, change the map motherboard and CPU only. Who should I email and what are the details I need to provide to get my two windows xp and vista activated and validated after having reformatted and re-installed?

  If I happen to call by phone I phone number of the customer care person knowing Tamil language?

  Kind regards

  Components

  You must notify anyone.  If you have problems activating automatically after the changes, do it manually.

  To activate manually, go to start, search, and type in slui 4 enter.  Enter your country and press Next.  You will be on a screen with a phone number and a bunch of codes below.  Dial the number and browse automatic guests until you get to a human being.  Have your handy product code because it will be asked.  Explain the situation, but it's the same PC and only installed on this PC.  They should give you a code to enter on this screen to activate Vista.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• change the loop condition and cursor

  Hi all

  We have the procedure below:

  PROCEDURE ext_UPLOAD IS

  v_colname VARCHAR2 (30);

  v_tl_colname VARCHAR2 (30);

  v_stmt VARCHAR2 (32767).

  v_stmt_no NUMBER;

  CURSOR DISTINCT_COLUMN IS

  SELECT DISTINCT T_STG DB_COL;

  BEGIN

  v_stmt_no: = 5;

  FOR DBCOL IN DISTINCT_COLUMN

  LOOP

  v_colname: = DBCOL. DB_COL;

  v_stmt_no: = 10;

  v_stmt: = ' MERGE IN EXT_B ED

  WITH THE HELP OF)

  SELECT TAG_DATA,

  EQUIPMENT_FK_KEY,

  WORKORDER_FK_KEY,

  SEGMENT_FK_KEY,

  SHIFT_WORKDAY_FK_KEY,

  HOUR_FK_KEY,

  ITEM_FK_KEY,

  READ_TIME,

  ATTR_GROUP_ID,

  RECIPE_NUM,

  RECIPE_VERSION,

  NVL (FND_GLOBAL. User_Id,-1) l_updated_by,.

  NVL (FND_GLOBAL. Login_Id,-1) l_last_update_login

  OF MTH_TAG_READINGS_T_STG

  WHERE DB_COL = ' | " ' || v_colname | " ' ||') TS

  WE (';)

  v_stmt: = v_stmt | "ED. EQUIPMENT_PK_KEY = TS. EQUIPMENT_FK_KEY AND

  ED. READ_TIME = TS. READ_TIME)

  WHEN MATCHED THEN

  UPDATE

  GAME ED.'. v_colname |' = TS. TAG_DATA,

  ED. LAST_UPDATED_BY = TS.l_updated_by,';

  v_stmt: = v_stmt | "ED. LAST_UPDATE_LOGIN = TS.l_last_update_login

  WHEN NOT MATCHED THEN

  INSERT ('| v_colname |', EXTENSION_ID, EQUIPMENT_PK_KEY, WORKORDER_FK_KEY, SEGMENT_FK_KEY, SHIFT_WORKDAY_FK_KEY, HOUR_FK_KEY, ITEM_FK_KEY, READ_TIME, ATTR_GROUP_ID, LAST_UPDATE_DATE, LAST_UPDATED_BY,';)

  v_stmt: =.

  v_stmt | ("LAST_UPDATE_LOGIN, CREATED_BY, CREATION_DATE, RECIPE_NUM, RECIPE_VERSION)

  VALUES (TS. TAG_DATA, EGO_EXTFWK_S.NEXTVAL, TS. EQUIPMENT_FK_KEY, TS. WORKORDER_FK_KEY, TS. SEGMENT_FK_KEY, TS. SHIFT_WORKDAY_FK_KEY, TS. HOUR_FK_KEY, TS. ITEM_FK_KEY, TS. READ_TIME,';

  v_stmt: = v_stmt | "TS. ATTR_GROUP_ID,' | '''|| SYSDATE | "'| ', TS.l_updated_by, TS.l_last_update_login, TS.l_updated_by,'|"' | SYSDATE | " ' ||', TS. RECIPE_NUM, TS. RECIPE_VERSION)';

  mth_util_pkg.log_msg ('v_stmt: ' | v_stmt, mth_util_pkg.) G_DBG_DYN_SQL);

  -DBMS_OUTPUT. Put_line (v_stmt);

  v_stmt_no: = 20;

  EXECUTE IMMEDIATE v_stmt;

  -VALIDATION;

  END LOOP;

  EXCEPTION

  WHEN INVALID_NUMBER THEN

  RAISE_APPLICATION_ERROR (-20008,'The Data Tag you are tyring to insert the character data is.) A number should instead. ") ;

  WHILE OTHERS THEN

  RAISE_APPLICATION_ERROR (-20008, SQLERRM |' to ' | v_stmt_no);

  END;

  In above query we conduct cursor on DB_COL OF DIFFERENT T_STG, but the above query fails if we have the same db_col, but for groups of different attributes. I want the merge request and loop to work for separate but with given db_col ATTR_GROUP_ID as I have attr_group_id 10 and 20, but two of them may have db_col as n_ext_attr1 and slider should be for db_col and also take into account attr_group_id. can you be it someone please let me know how to change the cursor above and also the loop as well as db_col and attr_group_ ID the two are taken into account.

  Thanks in advance.

  Maybe you need to take a step back and explain exactly what you're trying to reach, providing tables of the example and example, the production of these data in the example data.

  No offence not intended, but your statement dynamic MERGE is not well written, completely does not use bind variables (and why you think concatenating SYSDATE in a stirng as it will work properly, I don't know), and will be a nightmare to maintain in the future.  I'll ignore for now the use of waste from other exception ONCE (even if it's really cr * p coding) you clearly bigger problems to solve first.

  Thus, in addition to providing some data and tables of the example can answer you, why you do not know the names of the columns you try to merge?

  The mention of the ATTR in your instructions seem to feel a bit as if you use a type of entity-attribute-value architecture to your database, is this true? I hope sincerely that no, since it is known to be a performance killer and a nightmare to code and maintain when it comes to relational database engines. (I have a personal experience of having been victims of such a database design, and fortunately, we managed to convince management that the product was not fit for purpose and it was abandoned within months purchased (if only we could see before purchase)!)

• PowerCLI Script to change the DNS servers and domain name

  Hello

  Brand new to PowerCLI, I'm trying to create a script that will change the domain name and the DNS servers of my ESXi servers. I found that I need to update the Vmware.Vim.HostDnsConfig to update these settings. I created the following script and the following error.

  $config = new-Object VMware.Vim.HostDnsConfig
  $config.domainName = "new.domain.com".
  $config.address = new-Object System.String [] (2)
  $config.address [0] = "10.69.69.80".
  $config.address [1] = "10.69.70.80".

  _this $ = get-view-Id "HostNetworkSystem-networkSystem.

  _this $. UpdateDnsConfig ($config)

  You can not call a method on a null value expression.
  

  Line: 1 char: 23
  

  + $_C. UpdateDnsConfig < < < < ($config)
  

  + CategoryInfo: InvalidOperation: (UpdateDnsConfig:String)], RuntimeException
  

  + FullyQualifiedErrorId: InvokeMethodOnNull

  I guessed the error message that I need to a value in the host name, I do not need to change the host name. So I create a variable to remove the host name and place it in the $config. Line received host name but still a mistake because the variable is pulling more information that I need.

  $hostname = get-VMHost | Select name

  $config. Hostname = $hostname

  When I insert the above code I have an error.

  Exception by calling 'UpdateDnsConfig' with '1' or the arguments: ' year error occurred during the configuration of the host.
  Line: 1 char: 23
  + $_C. UpdateDnsConfig < < < < ($config)
  + CategoryInfo: NotSpecified: (:)) [], MethodInvocationException)
  + FullyQualifiedErrorId: DotNetMethodException

  When I look at the $config I see the following.

  DHCP: false
  VirtualNicDevice:
  HostName: @{Name = ESXI01}
  Domain name: new.domain.com
  Address: {10.69.69.80, 10.69.70.80}
  SearchDomain:
  DynamicType:
  DynamicProperty:

  Of course the @{Name = ESXI01} will not work. Someone can explain how to get a host name in a variable and pass it to the Config.Hostname?
  

  You should be able to do easily by using the command "set-vmhostnetwork.

  I don't think that you can just write to VMWare.Vim.HostDnsConfig.

• Change the active microphone in AS3

  Is there a way to change the active microphone in AS3 without using the SecurityPanel.MICROPHONE?  All my attempts to stop any activity of micro, although triggered by a click of a button.

  Using

  var mic:Microphone = Microphone.getMicrophone();

  works great, them if I do it at a later time

  mic = Microphone.getMicrophone(newIndex);

  and survey - level mic.activityLevel is always-1.

  If I switch back to the original microphone, it works again, who ever has been initially selected in the control panel of security work.  With two microphones to work, and I spent has been selected via the Security Panel to make sure that's not specific micro.
  

  Is this a risk to security and unauthorized?  Once you initialize a microphone, is that what you're stuck with?  I spent the cameras in the air, but it was air.

  - as a side note, the reason for this need is we get comments every time that a user is using the computer's speakers is on firefox.  I put the looping to false and I brought the SoundMixer level 0, but as soon as safety microphone Panel window opens upward, the level rises and looping behaves as if it was set to true.  When the window closes, I get control again.

  Figured it out.  It seems that the Microphone.activityLevel is - 1, until you add a listener of the SampleDataEvent.  You don't need to add this if you run on the server.  In my tests, I was updating my reference the microphone to check the maximum in a loop of update.  I have no day the SampleDataEvent lsitenre since I was not actaully record, just check the microphone input level and do not think that it had to be in place.

  It seems possible that micro verifies that he was a listener of the SampleDataEvent, or is connected to a server before the maximum update, I just never saw this kind of thing done.

  I am not sure that this is the case, but that's what it looks like.  If anyone has more information, please let us know.

• AS2 to AS3

  I have a movie on the main timeline with this code in it and I want to convert it to AS3 can anyone help? Thank you

  If (_root._currentframe == 1)

  {

  _root.gotoAndStop (2);

  }

  on the other

  {

  _root.gotoAndStop (4);

  }

  If the code is inside a movieclip and you followed aree and Commander the external main timeline...

  If (MovieClip (root) .currentFrame == 1) {}

  MovieClip (root) .gotoAndStop (2);

  }

  else {}

  MovieClip (root) .gotoAndStop (4);

  }