Change the active microphone in AS3

Similar Questions

• Can I programmatically change the active group on a Hypertrend in DSC?

  I would like to know how to change the active group of a hypertrend program in Labview DSC.  I saw a link that says it can be done at Lookout.  But in the module DSC, the active group is read-only.

  I know a hard way to do it.  I could save the settings of hypertrend as xmlSettings in a temporary file.  The active group is one of the parameters.  I could then change the group active in this file text to point to the new group, and then reload the settings.  But this isn't a clean way of dong it.

  Anyone know if there is an easy way?

  I found a way to do it but not very clean.  I don't know why there is no function to change the current group.

  Here's how I did it.

  

• Cannot change the active title bar

  Hey people.

  I use a HP Envy (Windows 7, etc.), a year or so old, but I just did a reset complete system - a few days ago. It is therefore running (approximately) on the parameters of the box.

  However, I have problems by changing the settings of the active title bar for programs that do not have their own settings of active title bar (think Windows Explorer vs Google Chrome). This has caused some problems, especially for things like Mathematica, where the menu under the title bar is screwed up. More important still, it seems just ugly.

  Unfortunately, go into the settings of customization (including advanced settings) in Control Panel does not work. In fact, the parameters are essentially the value by default and cannot not even match at the exit. It is quite confusing.

  Any help would be greatly appreciated. Please let me know if I can provide more information on the parameters, specifications, etc.

  Hello

  Thanks for posting the request in the Microsoft community forums.
  I understand that you can not change the active title bar on Windows 7.

  Please answer the following questions:

  1. you receive an error message on the computer?

  2. what happens when you click on personalization in Control Panel?
  3. don't you make changes on the computer before the show?

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.
  Try the troubleshooting steps provided in the links and check.

  Method 1:
  Put the computer in a clean boot state, and check if the problem is caused due to any third party software.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After the adventures of shooting set the computer to start as usual by performing step 7 above of the Knowledge Base article.

  Method 2:
  To resolve the problem use (SFC.exe) System File Checker tool to determine which file is causing the problem, then replace the file. To do this, follow these steps:
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  In the future if you have problems about the title bar active on Windows 7, please do not hesitate to post your request here on Microsoft Community, we will be more than happy to help you.

• Why not a Global change, newly created to change the activity ID work?

  Why not a newly created role of Global change (substrings) to change the activity ID work? Yet, I can copy a modifier of function (substrings) existing Global change to change the activity ID and it will work. The newly created is identical to that copied?

  Please upgrade to P6v7 and rename the activity ID problem will be fixed for life.
  You can rename 10 000 activities in 10 seconds using P6v7 without global change running.

  Jawad
  Novo rail, Sydney

• Programmatically change the Active Configuration results

  I use TestStand 2012 SP1.  I would like to be able to configure the Active Configuration to get results in the process template.  A station in market our sequential model would set sequential reports configuration as the current record while a station running that a batch model would fix the lot of the report as the configuration active.  In addition, if a station can be both, running the application can select the appropriate process template and he would then choose the appropriate reporting configuration.

  I have installation of configurations but need to know how to set the active configuration.  I don't want on a base by sequence, but rather at the level of the process template so that it is executed once and done.  This would allow developers to change their configuration, but still have the lot or creating sequential reports selected according to whether they are working on.

  Thank you.

  There are a few options here:

  1. Replace the ModelOptions plugin and change the setting for ModelPluginConfigurationToLoad to the appropriate configuration.
  
  
  2. Hardcode it in the callback in ModelSupport.seq.  This way if you've always wanted by automatic override features and call their own as they could.
  
  
  3. Hard-code this entry point for execution of Initialize just before the ModelOptions callback is called in ModelSupport.seq.  In this way the customer can always substitute and change it if they want.

  If it were me, I'd go with option 3 for your case.  You can use Parameters.ModelData.ModelType to determine which model they are running with.  Then, simply put Locals.ModelPluginConfigurationToLoad on the proper setup.

  Hope this helps,

• How can I change the active States of the child pages in the menu bar?

  I have searched through the muse adobe tutorials but can't find it. I want to change the appeareance of submenu of the menu bar items. I can't find a way, how this is done? I guess it's something fairly easy. Thank you!!

  Hello

  To change the appearance of submenu items, you will need to select them. To do this, keep clicking on the submenu item that you want to change the menu > submenu > Menu item. Once the (shown above left) Menu item is selected, you can change the appearance of this menu item. Select other menu items on the same page to edit several at a time.

  Dana

• Try to change the active patrician size

  Hello..

  I tried to create a partition today following the instructions written on the microsoft Web site. I HAV only c drive in my drive hard nd it showed 240GB... I pressed the volume button and it showed that I can reduce 90 GB... then I pressed the shrinkage, but it does not create an unallocated space. so I can't create a partition... rather my drive c lost 90 GB of space and 150 GB showing now... what should I do to return than 90 GB?
  I even tried MiniTool Partition Wizard Home Edition... still do not see it.
  Help, please!

  Hello

  Read this:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/shrink-c-fail-in-Windows-7-limit-reason-unknown/4a6ddeed-d881-4de9-9b75-0602664cea7c?msgId=61edde7b-bca0-43b2-958b-6ed6015b311d

• Satellite A100-2101won ' t I would change the microphone to the speaker jack on

  Hello

  I just bought a system from its 4.1 surround for better sound to my laptop Satellite A100-201 with Windows XP Realtek HD audio on.
  The sound system has two 3.5 mm jacks.

  I tried to put it so the microphone jack acts as the front speakers and headphones like the rear speakers but to Realtek taking it won't let me change the plug microphone, speakers on as only 2 channels are involved in the drop-down bar.

  Anyone got any ideas on how to get it to work?

  Thanks in advance

  Graham

  > but in Realtek it doesn't let me change the microphone jack to the speakers on as only 2 channels are involved in the drop-down bar

  To be honest, I don't think that you will be able to change the mic as a speaker on port port.
  The mic is an audio plug-in interface that receives audio signals! You can't use it as an audio output port!

  Using your speakers, you need an Audio Spliter, or use a special cable that take a 3.5 mm and is divided into several females 3.5 mm.
  Then, you could take your speakers and plug for the two or three (four) 3.5 mm male ends in the female ends that comes out of your headphones Jack (s/PDIF)

• change an active partition in windows server 2008 r2 makes me can't open a windows session and be invited to the compaq recovery system

  Dear all,

  I struggled with this problem for 3 days. I can't connect to windows server 2008 R2 because I accidentally change the active partition of the system partition to another partition whose size is very small (only about 1 GB). When I try to watch through the back, the sequence is all wrong. The previous system partition was becode D c. The other partition which is becoming C f.

  I tried to use startrep to fix this, but the problem remains the same.

  I also try to use bcdedit /? bootsequence, but because I don't know how to see the partition guid, I can't change the bootsequence.

  Can anyone help to open a windows session? Your help is appreciated production. I need it as soon as possible...

  Concerning

  Henry

  Dear all,

  I struggled with this problem for 3 days. I can't connect to windows server 2008 R2 because I accidentally change the active partition of the system partition to another partition whose size is very small (only about 1 GB). When I try to watch through the back, the sequence is all wrong. The previous system partition was becode D c. The other partition which is becoming C f.

  I tried to use startrep to fix this, but the problem remains the same.

  I also try to use bcdedit /? bootsequence, but because I don't know how to see the partition guid, I can't change the bootsequence.

  Can anyone help to open a windows session? Your help is appreciated production. I need it as soon as possible...

  Concerning

  Henry

  Hey henry cs

  These forums are for help on problems with vista

  I suggest that, for the best help repost you in the forums windows server 2008 below

  http://www.Microsoft.com/windowsserver2008/en/us/forums-blogs.aspx

  Walter, the time zone traveller

• Active microphone but do not pick up sound on the Samsung QX411-W02UB (Windows 7 Home Premium 64-bit)

  Hello

  I just bought a laptop Samsung QX411-W02UB refurbished with Windows 7 Home Premium 64-bit, and everything was going a lot until I've decided to try Skype and noticed that the microphone did not work. I'm starting to think that maybe since it is a used laptop, the microphone can just be pulled.
  I downloaded the RealTek HD Audio Driver, enabled in his preferences and set the volume and levels of boost to their maximum values (100% and + 36.0dB, respectively). I have all disabled devices shown, the only other being "Stereo Mix - RealTek High Definition Audio - Ready." I tested the microphone with this second 'device' on and off, inside and outside of Skype.
  Here's what he did:
  The bar on the right side of the active microphone (microphone - Realtek High Definition Audio - Default Device) has a few green flickering bars as if the microphone works for about 1 to 7 seconds, but then everything stops. I spoke directly to the microphone and nothing happens. When I do a test call on Skype with Echo/Sound Test Services, I hear no reading of my voice.
  I made an audio recording of troubleshooting, and it detects no problem (I've seen all the details and they all say "not present delivers". I've also updated everything need be updated (restarts and all).
  So it's pretty much my problem. I wouldn't want to return a laptop because the built-in microphone did not work. I hope I described it well enough. I worked on it for about 6 hours now so my brain becomes blurred and tired at all.
  Is there possible solutions to this problem or it looks like I'll have to use an external mic?
  Thank you in advance!

  Hi, thanks for the response.

  I tried to do what you suggested, without success.
  After I posted this, I discovered in fact two other problems with hardware, so it looks like I'll return it.
  Thanks again! I appreciate it.

• Update to Windows 7 Home Premium comes to remove controls that allowed me to change the color of my "active window". How can I change the color of my active window to the way I put it now?

  Windows 7 Home Premium Auto-updated 01/10/2013 and changed my display settings. The default value of MS white blind now changed the active window, I had put a plae green (easy on the eyes). I right click on the dektop of take me to the Advanced display properties, where I had previously been able to adjust various display settings, but can't find the controls? Where they are and how to change the settings to the way they were yesterday?

  PS this looks terribly like the horror story that I have with my new laptop running Windows 8 - and I don't want that!

  Thanks, but I reset the computer to an earlier time (before updates) and the active window back to my favorite 'pale green '. Liz

• How to change the wallpapers of the windows in the finder in OS 10.5.8ppc

  is it possible to change the background color in the windows of the finder of OS 10.5.8 ppc? Wallpaper NOT.

  command-J.

  You can change the active window or all windows with the option at the top of the window.  And at the bottom of the window, you choose the image rather than substance.

  Mind you, with the help of pictures will slow the refresh of window time.

• How to change the bootable partition? __

  I have 5 Partition on my hard - 2 system partitions and 3 extended partitions drive. I install windows 7 in the 2nd partition system, such as installation of windows 7 is 'disk error' for the 1st partition system. But before windows 7 was in 1st partition.

  Now when I format 1st Windows system partition is not to start at all.

  So I try 'Start Up Repair' using Windows 7 DVD. I havet find installing Windows 7 successfully, but it cannot solve the problem.

  I use ""bootrec.exe/fixmbr ' and "bootrec.exe/fixboot" advance Service Options console repair using Windows 7 DVD. "

  Please tell me that I change the partition bootable C: to another drive (for example, D: or e :)).

  [When you use Windows XP, I use fixboot (like fixboot G :) to change the partition bootable. )]

  Y at - it such a command or option to do so. ]

  Hey Divinemoon,

  Try changing the partition Active of C on the second system partition where Windows 7 is installed so that when the computer starts, it loads the appropriate operating system. After you change the active partition, perform the Startup Repair.

  a. Open command prompt in Windows recovery menu.

   

  Reference: What are the system recovery options in Windows Vista?

  a. type diskpart in command prompt.

  b. at the DiskPart prompt, type in disk list. You will see the list of drives currently connected to your computer.

  

  c. now type in select disk n, where n is the disk number. In this example, disk 0 is selected.

  

  d. now that correct drive is selected, type in the partition from the list for a list of all partitions on that disk.

  (e) to select the partition that you want to set as active, type select partition n, where n is the partition number.

  

   

  f. now that you have selected the disk and partition, mark it as active by typing the word active simply pressing ENTER. Now, the partition is set to active.

   

  g. out of the command prompt and run the Startup Repair tool. Reference: Startup Repair: frequently asked questions

  This should be it.

  If you want more information about the commands Bootrec.exe, see:

   

  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

  http://support.Microsoft.com/kb/927392

  Similar threads: change bootable partition

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to change the normal state inside the Accordion widget.

  Once I drag the widget, I see the base. Then, I can easily change the active state of each button.

  By clicking on 'Normal' and try to change the State normal it always changes back to 'Active' in appearance.

  Read the manual does ' t solve my problem. What thing?

  Thanks in advance

  Uwe

  I got it. Once I'm in the normal state and I want to change, click on 'Text' in the upper right of the Panel tools on top.

  Thanks anyway.

  Uwe

• Bug with the active State and normal state in the composition

  Hello

  I'm having a problem with the text on a composition between breakpoints. Here's an example: I the composition of new featured and I have a button with a font of 22 and then access a breakpoint and replace the police 16. The problem is that the button keeps the size of the text in the normal state on two breakpoints, but the active status changes to 16 for two breakpoints. I tried to change back the active State to a breakpoint at 22 and the other at 16, but it changes back to the last number used on the last breakpoint. Again, the normal State remains the same. Y at - it something I do or is it a bug?

  Hello Cristina,

  Please see Re: "Text on current breakpoint" button non-functional

  I would also add that the active state inherits the attributes to Normal State, so if you have your normal formatting through the breakpoints set in place as desired (for example, 22px for a breakpoint and 16px for another breakpoint), the active State will, by default, use these settings.

  If, however, you're done by explicitly change the active status value so that it ends up enforcement at all breakpoints, you can return the default by pressing the "Reset default" button in the States Panel.

  I hope this helps.

  Abhishek