RAID expand ix2 - 200

Similar Questions

• Iomega StorCenter ix2-200 how automatically save everything on the NAS to my external HARD drive?

  Hey, I have a WD 3 TB my book around the pose I want to connect to my IX2-200 and use the external hard drive to automatically back up everything that's stored on my NAS.

  How can I do this?

  Thank you.

  Not sure wheter ix2 is able to work with > 2 TB is spread over its USB ports, but normally you would create a copy job that contains "all directories".

  If your ix2 doesn't detect your USB, try to repartition your drive USB-2 to + 1 TB

• We need to get the new software we ix2-200 NAS new computers-Win 7 64 bit, old XP32 bit

  Hi everyone;

  Our company's new computers and they will be Windows 7 64 bit. We currently use XP with 32 bits. Do we need new software to connect to ix2 - 200 or the software that accompanies if will be good. Thanks for you help and have a great weekend.

  Hello Raym0nd69,

  There isn't any software owner to access the ix2.

  They run out of network/Internet protocols.

  as long as you have the IP address you can access the user interface, and as long as you map the actions you should be able to access the data.

• StoreCenter ix2-200 should he new software when moving to Windows 7 64 - bit to 32-bit xp

  Hi everyone;

  Our company's new computer and we they will be Windows 7 64 bit. We currently use XP with 32 bits. Do we need new software to connect to ix2 - 200 or the software that accompanies if will be good. Thanks for you help and have a great weekend.

  Raym0nd69,

  Please see my response on this thread:
  https://forums.Lenovo.com/T5/Iomega-Desktop-network-storage/do-we-need-to-get-new-software-we-have-i...

• Iomega ix2 200 direct access by ethernet without a router

  How to access the ix2 200 via ethernet to the laptop without a router? I tried with a DHCP server. It is assigned an ip address for laptops and 200 IX2. but when ping destination host could not be reached pop message up.packets sent 4, received 4 Can anyone help? assigned ip address 169.254.0.2 for ix2 200, 169.254.0.3 laptop.

  Your suggestion does not solve the problem. But I saw the NAS via router initially and then set a fixed ip address for the NAS in the settings. OK now.

• Ix2 - 200 cloud Edition cannot connect to the site of the system remote win8

  Getting message "Unable to connect to xxcloud" in the Storage Manager (ver. 1.4.4.14439)

  Everything looks ok on the main system (Win7) Green everywhere check :-)

  Open port 80, 443 & 50500-50599

  Cloud Edition ix2-200-DC386F FW 3.3.2.29823

  Any suggestions?

  so you must enable the automatic configuration of UPnP on your router... after that, you should be able to connect on your IP

• ESXi 5.0 and NAS Iomega ix2-200

  Hi guys,.

  We are seriosly thought about the posibility to define ESXI - Hypervisor - with Iomega ix2-200 NAS. We were check the official documentation for Iomega. I checked that ix2-200 is supported for ESXI 4.0, but we are not sure if pressed for ESX 5.0.
  Someone knows this product is compatible with VMware? I have not found any associated IX2-200 and Esxi 5.0
  Thanks in advance,

  If it is not on the HCL, this is not supported.

  However, it works very well (I run it every day).  This is not supported because most suppliers are not going in the effort to verify support for N - 2 equipment.

  If the support is important to you, why not pick up a px4/px6 supported?

• ESXI 5.0 and IOMEGA IX2-200

  Hi guys,.
  We are seriosly thought about the posibility to define ESXI - Hypervisor - with Iomega ix2-200 NAS. We were check the official documentation for Iomega. I checked that ix2-200 is supported for ESXI 4.0, but we are not sure if pressed for ESX 5.0.
  Someone knows this product is compatible with VMware? I have not found any associated IX2-200 and Esxi 5.0
  Thanks in advance,

  Hello

  on VMware HCL, the Iomega IX2 - 200 is certified only for ESXi4:

  http://www.VMware.com/resources/compatibility/detail.php?deviceCategory=San&ProductID=12947&deviceCategory=San&partner=30&arrayTypes=1, 3 & isSVA = 1 & page = 6 & display_interval = 10 & sortColumn = partner & sortOrder = Asc

  http://www.VMware.com/resources/compatibility/detail.php?deviceCategory=San&ProductID=12946&deviceCategory=San&partner=30&arrayTypes=1, 3 & isSVA = 1 & page = 6 & display_interval = 10 & sortColumn = partner & sortOrder = Asc

  So I think you're out of luck for ESXi5.

  Giuseppe

• Iomega StorCenter ix2-200

  I had the ix2 for a while, it worked perfectly. Once before, one of the drives has failed and I got a replacement of Iomega. Reconciled unity drives and everything was fine. Since then the camera has worked flawlessly again so far.

  During the last two weeks, the player became undetectable on the network of one of the two computers in the sharing network. The white light on the front flashes constantly. There is no indication that the drive is alive. I removed the disc and individually attempted to find any content on them. There are two partitions on each, but I can't get windows 7 to read on the part of the partitions. I don't know how they are formatted.

  (Or both) installed in the ix2, still just white light flashes on relentlessly. With no disc in the ix2, the light still flashes. Press and hold the power or reset button and power cycling the unit have no effect of the flashing light.

  What can I do? I have just the scrap drive and say good bye to my data?

  ARK,

  You will need to contact a professional data recovery service if you need data from these readers.

  The only thing that we can do that could get the NAS to start in the situation you describe is destructive data.

  If you are under warranty, you can submit a ticket for support here:
  https://Lenovo-na-en.custhelp.com/app/ask/

• IX2-200 Cloud edition slow performance on LAN

  I do experience copy speeds around 15-20 MB/s. Is this correct unit?

  I've seen some people post about 40 MB/s speed makes me think of something wrong with the configuration of my device.

  Usually I'm copying the files TO the device via SMB on a gigabit LAN to a Mac. LAN speed is 99-106 MB / s, so it is not the question. All protocols except NFS and SMB are disabled. All services (Media Server, stream etc.) are disabled.

  During the copy, I see 95-100% of the CPU load. Idle is 1-5%.

  The drives are configured for RAID1.

  Please share your copy speeds.

  Hello brain_away,

  Looks like you've done what you can with the firmware to optimize performance.

  For the ix2-200CE, these speeds are in the range of what I normally see.

• Iomega StorCenter ix2 Network Storage Cloud Edition upgrade 3.0.9

  Hello world

  I have an Iomega StorCenter ix2 Network Storage Cloud Edition (ix2-200).

  The NAS is currently leading the 3.0.9 software, which is the version it comes with.

  The 'upgrade' button in the web interface does nothing, while the NAS should be able to run the 4.1 software being a "Cloud Edition".

  Can someone tell me the procedure to upgrade the 3.0.9 software for the latest possible?

  See you soon,.

  Filippo

  Nope. I know that you won't be able to pass the 'border' 3.2.6 join .x:
  "3.3.2 below is unable to upgrade to version 4.1.102.29716.

• External storage does not work after firmware update

  I've updated my ix2-200 for the latest firmware. After that, my NAS does not detect the external hard drive when I connect to it. I need to plug in the HDD and restart the NAS, this way to detect the SIN, but is not a good solution, because maybe someone is its access to the NAS.

  With the old firmware, I connected and disconnected the external drive without any problems.

  Is there a solution? If there is none, is it possible to Flash an older firmware?

  You can check your status here:

  https://Lenovo-na-en.custhelp.com/app/answers/detail/A_ID/14431

• Switch firmware with rocket?

  I was thinking, since the "rocket" is a miniature version of the view, it wouldn't have the same firmware? I used the "rocket" before and nothing was really different. Can I just install the Fuze firmware on my opinion? I was looking through the latest version of firmware notes Fuze and there's a whole bunch of things that people have asked. (such as the speed of the wheels accelerated during the long navigation, the GoList expanded to 200 titles, etc.) I want just a new firmware, as we all do.

  Thank you

  -pabloman456

  pabloman456 wrote:

  I was thinking, since the "rocket" is a miniature version of the view, it wouldn't have the same firmware? I used the "rocket" before and nothing was really different. Can I just install the Fuze firmware on my opinion? I was looking through the latest version of firmware notes Fuze and there's a whole bunch of things that people have asked. (such as the speed of the wheels accelerated during the long navigation, the GoList expanded to 200 titles, etc.) I want just a new firmware, as we all do.

  Thank you

  -pabloman456

  Nope. The firmware is written based on material for the player, the "rocket" has different hardware.

• KB3011780 breaks my network of Retrospect on my HP 6300 system backups

  I installed KB3011780 on a system HP 6300 (Windows 7 Pro SP1 64 bit with all the other patches published to date).  We use Retrospect 7.7 on this system to make backups to a hard drive connected locally, on the network to an Iomega StorCenter ix2 - 200 NAS (now supported by Lenovo).  The backups worked without any problems for a long time.  The ix2-200 has Firmware Version 2.1.44.30050 which is updated.

  Over this last weekend, Retrospect tried to re-create the backups ("recycle") one of the network, but failed half way through the process.  I restarted the backup, and it has not yet.  I rebooted the NAS and backup Windows system, restarted and there still fail.  I stopped the Windows system and did a thorough relocation of the entire network and cable USB, just on the off chance that I was getting an intermittent failure, but the backup has failed yet after that I did the reboot.

  Here is a typical error log showing the messages of Retrospect when a failure occurs (with more compressed white space):

  + Normal backup using backup B at 24/11/2014 14:16
  For the backup set Backup Set B...

  -24/11/2014 14:16:06: copy of OS (c :))
  Additional error information for the member disk backup set ' 1-Backup Set B, "
  Cannot write to the file \\netstorage1\backups\***-hp-6300\Retrospect\Backup Set B\1-Backup Set B\AC000099.rdb, error-1116 (cannot access the network volume)
  Misspelled: "1-Backup Set B" (2623012864), error - 116 (volume does not exist)
  Cannot create session, error-1100 (invalid handle)
  24/11/2014 14:57:57: incomplete execution
  Rest: 133310 files, 51.7 GB
  Completed: 75 files, 1.1 GB
  Performance: 32.2 MB/minute
  Duration: 00:41:50 (idle/load/preparation, 00:09:11)

  Cannot compress the file catalog by Backup Set Backup Set B, 1100 error (invalid handle)
  Unable to save the Backup Set Backup Set B, 1100 error (invalid handle)

  Since these backups had worked well in the past, I decided to see if the recent patch for KB3011780 could cause problems.  I removed the patch and restarted the Retrospect backup.  He ran to the end without any problem.  To confirm that the patch was probably the cause of the breakdowns, I restarted the recycling backup early, which causes the entire contents of my drive (c :)) system, a process that takes several hours of IO intensive network backup.  It finished without any problems.

  I don't know enough about the technicalities of Retrospect how its I/O across the network to the StorCenter NAS but I guess it's using normal file system operations any.  He does know that it is a device in a network, and not a local device.  But obviously, the network i/o fails and removed KB3011780 (and do anything else that the reboot of the system required and then by restarting the program backup) fact errors disappear.

  I removed the patch from two other systems that make backups on my NAS and hidden on each of them.  So far, I saw no problems with it on any of our other Windows 7 systems.

  Reported problems with this update, it is not impacting each user win7

  (it is not installed no problem here with our backups)

• Cannot view documents shared in Windows 7

  Dear experts

  Earlier with xp that I was able to access iomega ix2-200 2 TB shared folders on a network, but now after installing win 7, when I click on the network icon, it opens the ip address 198.162.1.3 opening iomega. pls help me to go back like in xp. I am a novice in computer science.

  Hello

  1. How did the computer connected with iomega? Is it a cable or a wireless connection?

  2. When was the last time you were able to access the storage device?

  3. do you have a security program installed on the computer?

  4 did you a recent software or changes to the material on the computer?

  Method 1:

  I suggest you run the HomeGroup Troubleshooter and verify.

  Open the homegroup troubleshooting utility

  http://Windows.Microsoft.com/en-us/Windows7/open-the-HomeGroup-Troubleshooter

  Using the troubleshooter from network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Use Network Troubleshooter event logs to solve network problems

  http://Windows.Microsoft.com/en-us/Windows7/use-Network-Troubleshooter-event-logs-to-solve-network-problems

  Method 2:

  I suggest to go through the steps from the link provided and check.

  File sharing essentials

  http://Windows.Microsoft.com/en-us/Windows7/file-sharing-essentials

  Hope this helps and keep us posted.