Change codec

Similar Questions

• Changing codec to G729-G711 unit

  We have a unit 4.0.5 and callmanager 4.1.3 using g711 between them, but we now want to change for g729. How can I change to g729? Please notify. Thank you in advance.

  Change the Codecs of Cisco Unity

  http://www.Cisco.com/en/us/products/SW/voicesw/ps2237/products_upgrade_guides_chapter09186a008022dfc2.html

• I want to change codec number.how can I do?

  My dvd is region 4 and I need to change it to region 1. How can we do this?

  First of all, you can only change this TOTAL 5 times.  If you do this to be able to play a specific dvd don't.

  If you change this for good, right click on the drive > properties > region > change region.

• Change the codec for a multicam project

  Hi all

  I have a situation with which I hope you all can help.  I have AVC-INTRA 100 720 p 60 sequences of three cameras recorded on P2 cards that I placed by mistake on a sequence of 720 p 60 DVCPROHD.  I then nested this sequence inside another sequence of 720 p 60 DVCPROHD I can modify multicam all cameras.  After completing the project, I had this time "duh" when I realized it was actually AVC-INTRA 100 feet and not the DVCPROHD footage.  Now I'm wondering how to change the two sequences for the correct codec.

  So I know that I can simply create a new sequence of AVC-INTRA 100, copy the entire contents of sequence 2 (my multicam activated sequence with all editions) and paste it into the new sequence of AVC-INTRA 100.  The question I have, is that it contains a sequence of nested for multicam editing, and the nest is pointing to the original sequence with the images from three cameras isn't always properly in a sequence DVCPROHD.  So, I'm wondering how to get the change codec in AVC - INTRA 100 for the sequence with the images from three cameras, can tell the nested sequence to now point to the correct location?

  God, I hope I explained that clearly.  As always, thanks in advance for the help.

  Mike Tomei

  Well, do you feel lucky, punk? Make a backup of your project before you file try this... and I make no guarantee that it works, although in my test, it has done.

  Open your database project in a text editor; I like Notepad ++. Premiere Pro project files are more than XML documents, so we can decipher some of them and tweak it to do what we want. In the first place, what I list below is the line you're looking for, and the second, the line you want to replace it with.

  Here we go...

  1920,1440
  1,1
  
  0,0,960,720
  0,0,1280,720
  
  960
  1280
  
  1345473880
  1297106761
  
  1685483063
  1297107278
  
  EncoderPresets\SequencePreview\079a6181-acbf-4a6f-b1f2-fb44555a69e0\P2 720p 60Hz DVCPROHD.epr
  EncoderPresets\SequencePreview\cf2f7860-0e56-444f-a64f-74eafec54e44\I-Frame Only MPEG.epr
  
  079a6181-acbf-4a6f-b1f2-fb44555a69e0
  cf2f7860-0e56-444f-a64f-74eafec54e44
  

  It expected to do so. Once again, simply search for the first string in each group and replace it with the second; You can do this massively if you don't really have anything else that change made the multicam. What it should do is changing the size of the frame in the sequence (the first two), because DVCPRO HD is anamorphic and AVC-Intra is full-raster and then the latest re - configure the editing mode and preview of codec. It is a relatively simple change, since you are sticking to the same rate - which would be a more complicated way and probably break of the project folder. I think it will work, however.

  If it works... I love dark beers

• Windows Media Center is unable to output Dolby Digital/DTS via SPDIF... only stereo PCM is sent

  Hello

  I recently bought a desktop computer HP Pavilion with Vista Home Premium (64 bit) 5150t.  The PC comes with a TV tuner and it works well with Media Center except that it cannot output Dolby Digital (or the other program on the air with JJ or DVDs of films that have a DD) outside of my A / V receiver.

  My Board has Realtek HD Audio and I activated the digital (SPDIF) output in its program.  I put the "Properties" of the digital output in support of * TWO * DTS and Dolby Digital encoding.  When I press the 'Test' button for either format, outside A / V receiver correctly recognizes the format, so the problem is not with my receiver.

  Read forums and online help notes, I strongly suspect that the codec MPEG-2 by default for Windows Media Center is not configured correctly for cross DD or DTS - it somehow always stereo down-Mix before sending to SPDIF.  Could you tell me how to check and change codec setting?  Thank you!

  -Colin

  Hi Chow Ho.
   
  This problem occurs because the DirectShow component and audio decoder MPEG2 in Windows Vista does not correctly support DTS pass through S/PDIF or HDMI.
   
  To work around this problem, click to select the box Audio DTS and Dolby Digital check box in the SPDIF Out properties dialog box or the dialog box Properties of HDMI Out .
   
  You can also check out the link below for more information:
   
  http://support.Microsoft.com/kb/940685
   
  I hope this information is useful.
   
  Please let us know if you need further assistance.
   
  Concerning
  Rehman - Microsoft Support

• DMA2200 on PC-monitor does not work?

  Hello

  Well I have except the fact that the DMA2200 support not the VOB files, that the dvd drive is not region free and I had to reverse the mistakes of codes avi using the FourCC change codec, I'm surprised that I'm not able to see anything on a standard PC monitor.

  At first, I plugged the Componet video output (Y, Pb, Pr) of my DMA2200 directly on the vga input of the monitor (Dell 1900FP) with a cable special nine, but I saw just nothing more than a black screen. I changed the monitor for a LG Flatron L222WS monitor told me that the frequency was out of reach... Certain signals does not cross?

  But as the DMA2200 has a HDMI output that welland the Dell1900FP supports DVI - D Dual Link entry too, I. The 1900FP has a resolution of 1280 x 1024 and it can be run up to 75 Hz, 60 Hz it's native refresh rate. So, I went back to the store and bought a HDMI<->DIV - D Single Link cable.

  Only one? Yes, why not!

  DVI dual link as its name suggests has drivers more than the single link DVI for signal transmission. Single link DVI supports a maximum bandwidth of 165 MHz (1920 x 1080 at 60 Hz, 1280 x 1024 at 85 Hz) and use 12 of the 24 pins available. Dual link DVI uses all 24 pins available and supports a maximum bandwidth 2 x 165 MHz (2048 x 1536 at 60 Hz, 1920 x 1080 at 85 Hz).

  So, I plugged the HDMI<->DVI - D on the DMA2200, the Dell1900FP monitor and the monitor directly on channel 2: digital input. But... a black screen again. As I left the monitor rescanning the entrance, he tells me "Please press any key of the mouse button. It seems that the monitor sees a digital signal, but expected more... hmm... what to do?

  I tried to use NTSC (instead of our PAL) on the DMA2200 menu as the frequency changes, but it does not work. I also used all of the selections of entry on the DMA2200-menu (like composite-sd and hd). Normally, the HDMI options is grayed out and uses the default Auto option; but in composite-hd, my old TV mode (connected by SCART) turns black, but can still use the menu on the screen before the DMA and am able to change the HDMI settings, like 480 720 (if I remember correctly) and 1080 p (progressive format) and 1080i (interlaced). I hoped a solution here, but maybe it's just not my day.

  Then.

  Y at - there anyone out there that can help me to get a picture on the monitor? Whether vga or dvi - d... Please...

  Your Dell LCD and DMA2200 not being able to understand/sync between them with a direct DVI connection you could try to put a device inbetween them so that your Setup program can work. Try this device, basically, you connect the DMA2200 using RCA cables to the KWorld device and this KWorld device is then connected to your Dell LCD screen.

  See you soon.

• Movie Maker 6.0 will post video

  I am using Movie Maker 6.0 on Windows 7 Home Premium

  I worked on a video since a few days and I have been posting to my computer I'm going along for backup. I finished the video (it is only 3 minutes and a half long) but now it won't publish. It happens at some point (usually around 56%), then it becomes white and restarts. I do not understand why he is doing this now when it worked fine before.

  I've tried changing codecs and changing back to default settings. My videos are AVI, my photos are PNG and my audio is MP3.

  I am referring to Movie Maker 6.0 that comes with Vista.

  I solved it by recording my video small pieces at a time - if I saved all at the same time it wouldn't work. Thanks for the reply.

• CUCM phone with CTS SW 1.7 Config / MIDlets: location of external data settings

  Q: am I on the right to leave the empty authentication server URL or is it still necessary in the Config of the phone with SW 1.7 / MIDlets running?

  (Background: access to the URL of screenshot of the phone is handled differently with 1.6 and 1.7 CTS endpoints (see here) )

  Cisco Unified Communications Manager Configuration Guide for Cisco telepresence system is not clear about phone configuration / authentication URL:

  On the one hand:

  -with SW 1.7 MIDlets are mandatory

  and

  - table 2-6 says ' leave blank to use the default all fields.» (this of course also means the field"Server authentication" ")

  On the other hand:

  -Chapter 'setting up a remote phone' said

  «.. . Enter the following in the field of the authentication server: http://<> Address >: 8080/authenticate.html IP CTS. »

  NOT differentiating between 1.7 so or SW earlier, do not differentiate the Solutions MIDlet MIDlet / No.

  and

  -Chapter Phone IP MIDlets Interface configuration step 9 just allows me to remove the Service URL and URL at idle, not talking about authentication URL

  Just to say things straight:

  1.7 midlet works both feel so auth. Server is configured on the phone (pointing to the RTC) or if it is empty and the Enterprise effect parameter

  But access to the URL address phone screenshot is possible if I leave the field blank and associate the phone to an existing user of CUCM

  Thanks for any answers

  Thanks for the comments, we will work on the clarification of our documents.

  As you know that prompts you the codec for authorization and, now, because of the security change codec will refuse the request from version 1.7.

  A few things we do now 1.7

  -Remove the URL for authenticating all IP phones
  -Create a new user account inquiry CUCM (example: admin/cisco), with ONLY
  the necessary rights to make screenshots and associated phone.
  -Configure the URL for authentication within the parameters of CUCM company with one IP address instead of the host name
  -Open Ports in the ACL to allow phone to communicate with CUCM

• Editing files in first CC Camtasia .avi

  Hello

  I am a teacher and I often use Camtasia for screen recording software. I do the main editing in Camtasia, but I want to finish with the editing with Premiere. So far I had problems trying to do.

  I tried to save the Camtasia .avi file, then imported the clip of a first draft, the device used the 'create new sequence of the Clip. Random problems seem to occur. Once the vertical sync was out and all was leaning towards the right; on another, I had artifacts of compression in all directions and on the other the last minutes of the video was frozen.

  So, is it possible?

  Thanks in advance,

  Jason

  When recording with Camtasia record the avi file with another codec such as Lagarith instead of TechSmit.

  Lagarith is a very easy to change codec.

  Lagarith Lossless Video Codec

  If you can redo the recording I would.

• Problems with CS6 + Youtube

  I have a big problem. I bought CS6 in order to be able to freely change my game of youtube videos to add a simple watermark, overlay and the fade in/out odd titles... For some reason, CS6 when I finally finished that it kills the quality (completely), adds a border and a product more to have time to be in a format that is not downloadable. My start files are filmed with Bandicam and exit at .avi files 700 x 480 with MJPEG codec video and PCM audio codec. These work perfectly and easy download, but add a simple title which vanishes and a minor fade at the end translates who need of 13 + hours to export to AVI format (again with somehow lower quality despite clicking on options for high reolution) and with obviously changed codecs cause they usually download... I am cropping the image to remove the border and who seems just add even more time, for something that shouldn't be there in the first place, honestly, what can be done about it? I am now 3 days late on the set since I bought CS6 because it maintains butcher my videos.

  Step 1. I created a sequence using square pixels with a 848 X 480 image size. I imported a file HDV - just something stupid. An alligator wrestler tickle an alligator at Gatorland in Florida.

  The video has some moves. It's not a game, of course, but I thought that the straight lines of the railing could improve the test.

  Step 2. I put the HDV file on the sequence keeping the sequence settings.

  Step 3. Then I exported the original file in order to see how it looks like on YouTube. This video #1

  Step 4. Then I put the logo of Isaac on top and it has exported to YouTube exactly the same way. This is the video #2.

  Step 5. Then I played the video in the full quality program monitor, and 100% of the scale so I recorded the reading with the same software Isaac uses only mine has a watermark. I recorded using MJPEG, even if I would have probably used Lagarith - but MJPEG is as Isaac and that is the purpose of all this.

  This is video #3. He is not shown directly, but will be available on my site for those who are truly in need. But they are easy to create for yourself.

  Step 6. Can I put a logo on the video and captured as video #4.  Also not posted on YouTube.

  Step 7. I put the video n ° 3 on the Premiere Pro timeline and it has exported to YouTube. This is the video real reference for the next step. It's video #5.

  Step 8. I put the logo on the MLPEG video in the timeline and exported in the form of Video #6. This is the real test. A MJPEG video on a Premiere Pro timeline with a logo, exported to YouTube.

  The parameters for exports to YouTube are all identical. It is up to you to judge the quality.

  I do all the available by Issac original files to download. If someone else wants the files, just send me pm and I'll give you the link.

  You will want to use the great YouTube Player, not the small player, and it does little good to make it full screen since most computers not top of the line very well. Although the degradation is not all that horrible on my monitors.

  The black lines on the sides are minimal and are bothersome if you look for them - or so it seems. I think that it is a function of the great player, but I can't swear to it.

  Here are the YouYube videos:

  Export settings I used for YouTube are as shown:

  

• How to change my settings of codec audio idt high definition.

  Hi I want to change my settings from the stereo to the surround out in my laptop 2204tx g6 in idt hd audio codec.tried but failed.my idt settings shows only stereo. Any solution please?

  Hi Arvind99,

  Thank you for visiting the Forums HP's Support and welcome. I read your thread on your HP Pavilion Notebook g6-2204tx and change the sound settings. Here is a link tosound questions.

  I hope this helps.

  Thank you.

• I can't open videos or change with Movie Maker. Is it because I have a Sony Handycam? He said that there is a lack of "codec". Where can I install the missing codec from?

  original title: help with Movie Maker...

  I can't open videos or change with Movie Maker.

  Is it because I have a Sony Handycam?

  He said that there is a lack of "codec". Where can I install the missing codec from?

  Very frustrating because I've used it before - maybe because I have SP3? But I don't want to uninstall SP3... :-(

  Help, please!

  Thank you!!

  Thanks for the info.

  MPEG files are problematic in all versions of Movie Maker.
  Best bet would be to convert the files to the. WMV format
  before you import into Movie Maker.

  There are many converters available on the net... some
  free... some detail.

  The following freeware converter is just one example:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory (freeware)
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster)
  (the file you want to download is: > FFSetup280.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the final screens)
  (Windows XP / Vista / 7)

  First, you will need to decompress the file or just open the
  Drag FFSetup280.exe out of the folder
  and drop it on your desktop. To install left click.

  Next, after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your video clips on the main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Good luck...

• change default audio codec

  Hello.

  Just a simple question about codec audio default on SX80 (TC7.3) H.323 call. Is it somehow possible to change the type of codec to alaw ulaw G.711?

  Thank you.

  Marcel

  I don't think you can change the default value and still have the other optional availalble.  However, you can use a filter Capset(2) to restrict the use of a particular codec, so it is not getting used to everything.

  Wayne
  --
  Remember the frequency responses and mark your question as answered as appropriate.

• On-demand lectures and addresses of Codec changing TMS

  If we change the address of the video (h.323 or SIP) codecs already programmed into TMS, TMS detects changes and update conferences with the new address, so they will be connected without problem?  Or will we have to go and touch all conferences to update their ourselves?

  Thank you

  Patrick Sparkman wrote:
  Well, after changing some of the codecs addresses, TMS hasn't changed the addresses in the already scheduled conferences.  [...]
  Any ideas why TMS didn't want to update the conference with the new addresses?
  

  It is not expected either. TMS redirects never existing when meetings the dial plan changes. I'm afraid that the only solution is to re-record all of these conferences manually.

  Wayne DeNardi wrote:
  How have you got TMS set to track the systems (MAC Address, Hostname, IP Address)? - This may affect it somehow if the other settings are changing - I'm only guessing though.  [...]
  

  No, this won't have any effect.

  Kind regards

  Kjetil

• Animation Codec options changed in AE/first 2015.3

  Looks like the export options have changed for the Animation in the latest codec. When exporting, a used to be able to have the slider of level of quality available.

  These are looking have disappeared in the latest version.

  What gives?

  New 2015.3 (13.8.1)

  

  Old 2015 (13.7.1)

  

  Because suddenly, Apple has announced that they are declining in favor of QuickTime, Adobe was blurring a bit. They quickly adjusted things and After Effects is no longer based on QuickTime to encode or decode most commonly used QuickTime codecs more. Recent versions introduced a native encoding for the Animation (among others). However, the native codecs have some differences.