Black screen instead of desktop Windows XP on Satellite A100-455

Similar Questions

• Black screen on startup of Windows 7 system

  so I have a PC with windows 7 installed in. whenever I turn on the computer, I have to restart exactly 3 times to reach the main office.
  the first time I hear the sound but the screen is still black.

  the second time, the screen is lit until the startup of windows line is fully charged

  the third time, windows starts normally.

  I just had this problem recently, a few weeks back, I think.

  and I don't know how to cope.

  Original title: Windows 7 problem

  Hello sunny

  Thanks for posting your query in Microsoft Community.

  I imagine the inconvenience that you are experiencing and will certainly help you in the right direction to solve the problem. However, I would be grateful if you could answer a few questions to refine the question in order to provide you with better assistance.

  1. You did changes to the computer before this problem?
  2. Do you have an error message when you start your system for the first time or the second time?

  There could be a variety of causes, with the result a black screen the performance of Windows 7 systems. Reasons could be a problem with the video driver, problems with the Desktop Window Manager or may be some registry problems. So, I suggest the following methods to diagnose the problem and help get started you in a good sense:

  Method 1:

  Try to start the system in safe mode and check if the number is reproduced. If this isn't the case, then clean the computer starts and check if that helps.

  Step 1:

  Safe mode is a diagnostic mode in which you are connected with only the minimal necessary services and active pilots. Check if the number is reproduced.

  Start your computer in safe mode

  Step 2:

  Put your system to the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.
  How to perform a clean boot in Windows

  Note: See "how to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.

  Method 2:

  If the methods above do not help, please refer to the additional steps in the following link:

  Why my screen is black when I start Windows 7?

  Registry warning:
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  How to back up and restore the registry in Windows

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• Error message: Windows could not open possibly due to a hardware or software upgrade with a black screen and white on Windows XP starts.

  Original title: suddenly Windows XP does not open

  After using the computer someday, he would not start the next time I lit. Windows tried to start but failed and went to a black and white screen saying windows could not open possibly due to a hardware or software upgrade and invites me to try opening windows normally, safe mode, using the last well-known congig, etc... Every choice has ended up doing the same thing, windows tries to start and end up back in the black and white screen.

  Hi Brian,.

  1. you receive messages or error codes?

  2. did you of recent changes on the system?

  You can read the following article and check if it helps.

  Computer stops responding with a black screen when you start Windows XP

  Black screen on startup

  Hope this information is useful.

• Computer stops responding with a black screen when you start Windows XP. Cannot select anything advanced startup options

  Original title: can't open Windows
  I can't open my laptop at all... block when I select anything in the mode without failure or screen black normal mode :(
  What should I do? Thank you!!!

  Hi Mihou,

  1 have. what changes you made before the question?

  2. What are the options you see in the advanced startup options?

  You can follow the methods in the article in order to solve the problem.

  Computer stops responding with a black screen when you start Windows XP
  http://support.Microsoft.com/?kbid=314503

  Azeez Nadeem - Microsoft Support [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• cannot re start my system by getting only a black screen with recovery of window failure

  original title: do not re start

  I have a dell inspiron laptop and tried to install windows7 vista upgrade, since, so I can not re boot my system by getting only a black screen with insufficient recovery window, I followed the instructions on the screen to re-boot without success, and when I insert the disc of the operating system for re install nothing happens, Pls help TKS.
  Myrna

  Hi myrnaspiers,

   

  1. What is the exact error you get when you try to start windows.

  2. what type of installation you have done, it's a custom Setup or an upgrade.

  3. check if you have the option to go back to the old version of windows.

  I suggest you follow the link to black screen when I start Windows 7 below.

   

  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

   

  I also suggest you start in safe mode.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  If you have not used the repair which is a system repair option in Windows vista start DVD, you can use it and check if the problem persists.

  To open the Startup Repair refer

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-fix-a-boot-startup-problem

  For more information about the Startup Repair, refer

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

• Computer stops responding with a black screen when you start Windows Vista

  Computer ceases to respond with a black screen when I run Vista, this happen right after the installation of updates. original title: computer stops responding with a black screen when you start Windows XP__

  If you think that Windows updates are loaded:

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  MS - MVP - Elephant Boy computers - don't panic!

• Black screen after upgrading to Windows 10

  I upgraded from win 8 to win 8.1 and charge upward to my connection. Once I connect the stage is empty with no office or whatever it is. My only access was with the Task Manager and from there I was able to get to the control panel but I can't restore to previous Winows. I was able to get online and I tried to switch to the window 10 and it loaded but unfortunately do not have a product code to win 8. And I don't have a product code to win 10 or win 8.1.

  can help me, thanks

  Bill

  Hello

  I realize the inconvenience that you are having with your PC, as the screen goes black after you log in. I will certainly help you to question.

  I suggest you refer to the suggestion of Sharath Srinivasa on August 7^th, 2015:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_10-hardware/black-screen-after-upgrading-to-Windows-10/cf3b4559-67d8-40E0-9cf2-ebf4528e1e78

  Hope this information helps.

  Please get back to us with an update on the issue, we will be happy to help you.

• Need drivers for Windows 7 for Satellite A100-773

  Hello

  I need Driver Windows 7 for Satellite A100 773

  (A) display!
  (B) sound?
  (C) WiFI!

  Hello

  Win 7 is not on the market! Just a beta (RC). Therefore, you will not find that all pilots released release for Win 7
  But if you need some drivers then try the Vista drivers.
  Many users have reported that, in many cases, drivers Vista worked with Win 7 OS

  See you soon

• I need all drivers Windows XP for Satellite A100-786

  I need all drivers Windows XP for Satellite A100-786. I want to use Windows Xp on my new laptop, but I have no drivers. Please help me!

  Look at the bottom of your laptop for PSAAxxxx letters. If it's PSAANE, then the drivers are for the PSAA8xx model, as for the PSAARE model, it has PSAA9xx... Try it, it works for me. It has the same sumptuous.

• Black screen instead of my desktop

  I installed and activated Windows 7 without problem a few weeks ago. I did an update and now a black screen appears instead of my desktop and I get this message: your version of windows is not valid (key). I bought this product legally, does anyone have a solution?

  Windows 7 displays "Windows is not genuine" with the code error 0x80070005:
  http://support.Microsoft.com/kb/2008385/en-us ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Black screen after update yesterday Windows 7

  This morning I got a black screen with cursor error.  Was able to get into task manager, started in safe mode, Startup Repair did not work.  Went to system restore and restored to the 8/14 update, computer restarted normally.

  So the problem seems to be related to last update (19/08/10).  Now, of course I am offered this update again!  Any info on this problem?  I'm on a Dell Inspiron 546 desktop running 64-bit Windows 7 Home Premium.  Thanks for any help...

  Thanks for your reply.  After the system restore, I installed all the news updates and system rebooted normally.  Who knows why?

• AoC crashes on black screen after upgrading to Windows 7

  My upgrade to Vista (64 bit) to Windows 7 appears smooth, with all works well. When I tried Age of Conan mmo for the first time, he loaded the game, but within seconds, the screen started flickering black/game/Office a few times alternately between the three with in game its operation across all three screens. After 30 seconds, the screen freezes on the game screen, or freezes on the black screen or briefly blue screens (no time to read the error message) and the computer restarts.

  I have updated drivers for my card (Nvidia 8800GT) video with Windows 7 compatible drivers, and the problem persists.

  The game went well on before Vista upgrade.

  Help!

  Thank you

  Windows Update has nothing to do with the upgrade of Windows. Posting here instead: http://social.answers.microsoft.com/Forums/en-US/w7programs/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I have a black screen when I install Windows 8 on Multiboot with Windows 7?

  Hello

  I tried, again and again, to install Windows 8 on a custom installation, so that I could Multiboot Windows 7 and 8 together.
  I already have a genuine Windows 7 Ultimate installed, and I purchased Windows 8 PRO download site Australian Microsoft windows, the operating system on my computer (using software that I installed from the windows Web site once I bought it), and burned the Windows 8 PRO ISO on a DVD.
  I did a forum on how to use disk management to create a partition for Windows 8, it's not the problem.
  Once I run the Windows 8 installation DVD in the Boot menu, I entered my product key and the installation continues its way and the computer restarts like twice, but the third restart it comes up with a black screen! I waited 15 minutes, but still nothing around. I also tried different ways to install Windows 8 on a multi boot (as I don't want to lose Windows 7 and all my files - I NEED multiboot), but she always ends up with a black screen with no end!
  Someone please help me, as now Im left without windows!
  Thank you
  -RJ

  Hey

  I found a solution for the problem of black screen!

  Thank you to all the guys who have tried to help me solve this problem. I really appreciate it!

  There seemed to be a problem with my monitor, or my graphics card drivers and windows installation 8.

  The solution has been found on the HP forums, at this link:

  http://h30434.www3.HP.com/T5/notebook-display-and-video-e-g-Windows-8/Installing-Windows-8-upgrade-black-screen-after-Windows-8/TD-p/1974699

  And thanks to cSalman on this forum, he wrote:

  WINDOWS INSTALLATION PROCESS 8 EVEN AFTER THE VACUUM OF THE COMPUTER SCREEN:

  1. In MSCONFIG, uncheck "Load Startup items". Disable everything in the 'Services' tab and then restart the computer.
  2. Install windows 8. After 1 restart, the screen will become empty.
  • Connect another monitor/TV with your laptop / desktop.
  • Your windows process 8 installation display on 2nd monitor/TV, but will remain empty in the 1st monitor.
  • Complete all the installation process of windows 8.
  • Once done, change the settings of the monitor to windows. OR simply close the lid of the laptop and open back

  MY EXPERIENCE:

  • In my case, what happened, I was installing Windows 8 to my Toshiba laptop.
  • I did 2nd TV monitor and installation process begin to show in it, while the laptop screen remains black all the time.
  • After complete installation, my laptop screen stays black and would not be ' t difficulty even with the help of response from Microsoft Support.
  • So they rise to more expert and I suppose me to receive the call from them the next day.
  • Same day that I started to watch a movie with my TV monitor, then I thought allows me to close the lid of the laptop.
  • As I closed the lid of the laptop, TV erased, so I opened the lid laptop back again.
  • As I opened the rear lid, windows 8 has detected the laptop screen and started working

  ------------------------

  And Voila! After disabling all services and startup items in windows 7, then using my TV as my monitor, I was able to complete the installation of Windows 8 and now I'm happy!

  Thanks again,

  RJ

• Qosmio F60 - 11 c - black screen after update of Windows 7 Directx11

  Hello
  Two days ago I've updated Directx version because I want to try call of Duty Black Ops on my laptop. I've updated normally and it works perfectly but after a day at the restart of Windows7, after Windows 7 logo, I have a black screen and cpu fan running at full speed. So I used Toshiba Recovery Center and I got my pc to make settings. When it installs the drivers crashing into the graphics driver again. After that, I installed Windows 7, but I am using my computer on the resolution of 640 x 480 with 8 colors... And I can use the security with network mode but if I install the driver for GT - 330M and restart the computer, it hangs on after restarting windows 7.
  I tried to change the options in the bios, but it's always the same problem.

  * My :* graphics card Nvidia GT330M
  * :* Bios version 2.50 / EC2.40 (last update on the Web from Toshiba site)
  * Nvidia Driver :* 260.64

  I downloaded 197.16, 197.71, 258.80 drivers Nvidia and laptopvideo2go, but when I try to install these versions, it does not compotible with my control panel.

  IM totally crushed now and I do not want my laptop to Toshiba Technical Service which is in Turkey. For an easy fix, they spent 30 days...

  You have an idea?

  Thanks in advance
  Macaws.

  Post edited by: araskalyoncu

  > I used Toshiba Recovery Center and I got my pc to make settings
  What happens then?
  Problems after installing the operating system recovery disc?

  > When it installs drivers crashing into the graphics driver
  You n t need to install all the drivers after installing the recovery disc. The recovery disk installs OS Win and also drivers needed!

  > I downloaded 197.16, 197.71, 258.80 drivers Nvidia and laptopvideo2go, but when I try to install these versions, it does not compotible with my control panel.

  If you want to install non-Toshiba drivers, you will have to do it in the Device Manager.
  You must use the Advanced installation procedure and have point to the driver files (ini files) that you have downloaded and stored on the HARD drive.
  You have simply force windows to select this driver.

• Black screen after updates of Windows 8.1 - No. Cursor (Lenovo 50-75) - and gets hot

  Dear Forum,

  I have a new Lenovo Z50-75 with FreeDOS: I made a Windows 8.1 installation, and everything went well.

  After installing the approximately 70 updates - at one point it restarts and I get a black screen, just after few see the Lenovo Logo (enter the BIOS works).

  It is not all Windows start - I can't get fashion so safe, and I don't get any cursor.

  The behavior is reproducible, 2 times. Also when it crashes at the black screen, the van get reall busy, Levy and the laptop gets hot.

  Anyone working on this issue, or has any idea what should I do?

  Thank you

  Robert

  Updating the BIOS is not always my first option (risk, performance vs).

  Anyway... It works, everything is good.