Change disc to start and iTunes

Similar Questions

• Need help recovering from a blue screen. I re from the installation discs on hand and not intend to save all data currently on the hard disk.

  A number of months ago one of our computer got a virus and has gradually become unusable. He started as a kind of spyware, that obviously was not what it seemed. Now, we are to receive a blue screen every time we try to start the computer if I try in safe mode it brings me to the "Administrator" or "name of the wife." When I click on one of these he says it saves the parameters and then returns the same screen. I received what I believe to be the re installation of Dell discs, but now I don't know how to access. Thanks advance!

  If you have a Dell recovery disk, put it in the optical drive and restart the computer. As the computer starts, press the F12 key and choose to boot from the optical drive. The restore disc will start and that you follow the instructions.

  If you have a true Dell disk operating system, follow the steps above to boot from the disc of the operating system. Here are the links explaining how to do a fresh install of XP. Once your operating system is installed, you will then need to install the drivers for all your hardware. If you have received a genuine Dell OS disk you have too a disc called "Dell Resource CD". This CD has all of the drivers. Put in the drive, install the application, and then install the drivers that are found.

  Don't forget to update XP Service Pack 3 and make all Windows updates. Update of the common as programs Adobe Reader, Java, Flash, etc. for the latest versions. Install a good antivirus like NOD32 (commercial), Avast or Avira (free versions available).

  http://michaelstevenstech.com/cleanxpinstall.html - Clean install - how-to
  http://www.elephantboycomputers.com/page2.html#Reinstalling_Windows - what you will need at hand

  If you can't do the work yourself (and there is no shame in admitting this isn't your cup of tea), take the machine to a professional computer repair shop (not your local equivalent of BigComputerStore/GeekSquad). MS - MVP - Elephant Boy computers - don't panic!

• Impossible to change my new tab page - it appears as "Quick start" and I can't change it BLAH about: config page

  When I enter on: config page and try to change the new settings of the about tab: empty it changes them, but when I opened a new tab it opens this "quick start" and it shows windows with a few sites I visit, but there is no option in which I choose if this is or a blank page. I had this option, I have not changed.

  New tab override (browser.newtab.url replacement)
  https://addons.Mozilla.org/en-us/Firefox/addon/new-tab-override/

  With Firefox 41 (and later versions), it is no longer possible to customize the
  page displayed in a new tab by the evolution of the browser.newtab.url preference
  in the about.config. Due to the fact that the hijackers abused the
  preference in the past, Mozilla has decided to remove (see bug 1118285).
  Fortunately, by removing it, Mozilla has also introduced a new API to bring
  This feature to life as an add-on. This module allows the user
  Choose a page in a new tab.

• If you use firefox normally written or search for words in the search bar in the start page, it changes automatically to yahoo and giving results. How to remove this automatic function - change at yahoo. Remove the list of yahoo search engine has no effec

  ..
  How can it be possible not able to control own firefox search engine? How yahoo can make changes in the configuration of firefox and always change in yahoo automatically after doing search page of firefox?

  I did not any changes having yahoo as engine ever.

  Best regards
  J.Tuomi

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode

  Reset the pref browser.startup.homepage_override.mstone through the context menu by default on the subject: config page and close and restart Firefox to restore the on: default home page.

  • Open the topic: config page through the address bar
  • Type in the filter bar: mstone
  • Right-click on the browser.startup.homepage_override.mstone line, and then select: Reset
  • Close and restart Firefox

• I have a new iPaD Pro.  In the App Store and iTunes there my husband ID, how can I change that to mine

  I have a new iPaD Pro.  In the App Store and iTunes there my husband ID, how can I change this to mine as a parameter by default when I click on her I D to change it, it goes to my ID.  I have the settings of cloud to my default ID

  You can log in to an account by tapping the settings id > iTunes & App Store and then type "logout" on the context menu, and you can then login with your account

  If you have one of the apps to your husband on the iPad, then they will be linked to its id, as well as their account will be able to download updates of its apps

• How do I keep my wifes calls appear on my phone and mine appear on hers, we share the same acct icloud and itunes? It just started this on one or two updates ago

  How do I keep my wifes calls appear on my phone and mine appear on hers, we share the same acct icloud and itunes? It just started this on one or two updates ago

  Welcome to the Apple community.

  I'm afraid that is what happens when you share an Apple ID.

  Ideally you should each have your own ID and use family share for share purchases, but at least you would be better to have your own ID's for everything except iTunes.

  I suspect that your problem is that you share an ID for FaceTime, you must either stop this or make sure that you have only and that your caller ID is only your phone number.

• The error that says that I have not installed hard drive when I start the computer. Also, when I clicked on my D drive, he told me to the disc is damaged and inaccessible

  Original title:

  When I start my computer, a message on the screen says I have no hard drive installed. my computer will load eventually after many attempts and when I clicked on my D drive, where all recovery files are kept, it tells me that the disc is damaged and inaccessible.  Can someone help me before I'm locked out of the computer for good?  Thanks in advance Andy D.

  Determine the manufacturer of HD computer. Go to the manufacturer's website and download their software/utility to check the Dowload HD it and burn it to CD or DVD according to the instructions. Boot from the disc newly manufactured. Run the utility to verify. If necessary, replace the HD and restore backups.

  Tom Ferguson

• I'm Swedish in Sweden. And I installed Adobe for a trial period of 30 days. The menus are in Swedish, but when I want to start and then editing the language changes in Finnish, a language completely different to almost all other languages. Help!

  I'm Swedish in Sweden. And I installed Adobe for a trial period of 30 days. The menus are in Swedish, but when I want to start and then editing the language changes in Finnish, a language completely different to almost all other languages. Help!

  Hello

  This link might help: changing the language setting of your Cloud Creative applications

  Kind regards

  Sheena

• "When I import the xls file its start and finish dates to date of data change.

  I'm using Primavera p6 v7 autonomous, I export project in excel sheet and I put my activities with start and end dates it. When I import this sheet in primavera the start and finish dates change to date of data...
  
  Can someone guide me and suggest me what should I do to solve this problem...

  You insert the logic successor/predecessor for these activities. What, exactly, are these activities? If you want an activity at the start/finish on a specific date, you can always use a constraint.

• CS2 disc 4 won't start and complete the installation.

  I had this with disk 1. ThenIi switching discs for the re-installtion on win7x64. When I get to disk 4, it won't turn. I know that the disc is good and the disc, I can see the content on when in the other drive. I can't wait to go through the installation of any new. but it looks like I have to. I tried to install the final two components. Acrobat and go live but he dislikes the SN on the case. looking forward to your answers.

  CS2 is completely not supported under Win 7 and the fact that you are using a 64-bit version, it will be even harder to make it work. Best advice I can give you is to upgrade CS5.5 while you still can.

  Bob

• I can't change the location of the iTunes library

  I used iTunes with my Mac Mini, and all the music and video have been stored in the main hard drive. As I added a 120 GB SSD inside the Mini and installed OS X (El Capitan) in it, I want to change the default location my iTunes library in the folder iTunes, in the old disk, because I want only the OS X and applications of this SSD because its space is short. But when I go into iTunes preferences I change the location of the media file, iTunes nothing happens. In the iTunes folder, I found the following:

  A folder called Album art

  A folder called automatically added to iTunes

  Files (all grayed out):

  iTunes Library Extras.itdb

  iTunes Libraty Genius.itdb

  The iTunes Music folder

  A class (grayed) called: iTunes Music Library.xml

  A folder called Mobile Applications

  A folder called Previous iTunes Libraries

  Any help? I tried several options but I could not.

  First of all make sure that you really understand what is a library. It is not the location of the media file.  That just tells iTunes where to store any media added from there.  For most people, a library is all the contents of the iTunes folder.

  Looks like your old drive still has various parameters of authorization in this regard.  On my other computer, I used several discs and in the window of Finder read information for each player, I've marked to ignore permissions on my data drives.

• How can I organize my music with iTunes and iTunes game folder?

  I used iTunes for Windows for a few years and 2 years ago started with iTunes game. There are 81 000 files in my folder of music, with 35 000 files in a subfolder of my iTunes. iTunes has about 10,000 songs. Some songs are in my music only and some are in the music/iTunes/media folder. Some are both. With 81 000 files, it is impossible to set this manually. Is it possible to do this with iTunes?  I've never played music with other programs. Is the set of the 'my music' folder in Windows managed by iTunes?  I have a double file Finder application that will get rid of DUP, but I worry that a lot of the music is not in iTunes game. How can I fix the entire folder? Where can I I start again with iTunes game?

  These links may help:

  Manage and backup your iTunes media library - Apple Support

  iCloud library: understand the differences between music from Apple and iTunes game - Apple Support

  The link above:

  When iTunes game adds these songs in your music library from iCloud, iTunes game is not change or modify your original files music located on iTunes for Mac or PC, or on your iOS devices, where they have been added.

• Compatibility problem with Vista and iTunes

  I downloaded iTunes 9 on my Tobisha laptop Satellite last night and put about 2.5 GB of music on it. I didn't upload the music from the internet. I used MP3s, I had for a few years.

  When I went to boot up the laptop this morning the loading process took some time, but it never loaded to the login screen. I just see the bottom of MicroSoft. Is there a compatibility problem with Vista and iTunes? Maybe I put too much music on my laptop?

  Boot in safe mode and delete iTunes and all the music I downloaded would solve the problem? Or it is less simple than that?

  Don't know where to direct this question if any help you could provide would be greatly appreciated.

  Thank you.

  Hello

  iTunes is compatible with Vista and there should not be any problem.
  Yesterday, I installed iTunes 9 on my U400 and everything happened correctly.
  If your laptop can not boot Vista correctly, then you should try the repair feature.

  Turn on the computer and press F8. Now you will see the advanced boot menu.
  Now, you have many choices.

  As a first step, you should try the option called: last good known Configuration (Advanced)

  If this will not help and the Vista will not start then try the option called repair your computer. This option displays a list of system recovery tools, you can use to repair startup problems, run diagnostics, or restore your system.

  If that does not help, then you will need to retrieve the unit using the Toshiba recovery disc or HARD drive recovery.

• Computer not starting and I get an error message

  After that I ran the microsoft of what free security scan it found some files that were Trojan horses that he couldn't get rid of, so I deleted manually solve them some of the problems that I had. The end of the analysis told me to restart my computer so I did. But now it will not start and I get an error message that says: "a problem has been detected and windows has shut down to prevent damage to your computer. Then he told me to check the virus and to ensure that it is configured correctly and run the CHKDSK command to check the alteration of the hard disk and restart my computer. How am I supposed to do all this if I can't even start up? I tried to go into safe mode, but the same screen comes up. He gives this technical information at the end of the message. STOP: 0x0000007B (0xF79E4524, 0xC0000034, 0x00000000, 0x00000000) if someone could help me it would be so awesome thank you.

  Hello

  Check the disk for malware:

  Create a Bootable CD with the Trinity Rescue Kit - free - which comes with 5 antivirus programs
  Integrable Hirem is another choice - more can be found using Google.

  Trinity Rescue Kit - download on top right of the page
  http://trinityhome.org/home/index.php?wpid=1&front_id=12

  CD of Hirem boot is another good choice
  http://www.hirensbootcd.NET/Download.html
  http://www.hirensbootcd.NET/CD-contents/138-HBCD-111.html

  Scan a Windows PC for viruses from a Ubuntu Live CD
  http://www.howtogeek.com/HOWTO/14434/scan-a-Windows-PC-for-viruses-from-a-Ubuntu-Live-CD/

  ===================================================================

  You can also save the data and re-install Windows 7. The hard drive can be set
  another computer as a 2nd drive (the best) or in an external USB enclosure. Either would allow
  allows you to copy the data to removable media such as CD, DVD or other USB drives.

  Or you can use a boot Ubuntu CD to back up data.

  Use Ubuntu Live CD to backup files from your Windows computer dead
  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer

  ===================================================================

  For slightly more:

  BCCode: 7B 0x0000007B

  INACCESSIBLE_BOOT_DEVICE bug control has a value of 0x0000007B. This bug check indicates that the Microsoft Windows operating system has lost access to the system partition during startup.

  Important information if you have received a STOP Code

  If you have received a blue screen error, or stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer connect with Support.

  If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.

  The following actions could prevent a mistake like this does not happen:

  1. Download and install updates for your computer from Windows Update device drivers.
  2. Scan your computer for computer viruses.
  3. Check your hard drive for errors.

  Cause

  Bug INACCESSIBLE_BOOT_DEVICE control often occurs due to a failure of the boot device. During the initialization of the I/O system, the boot device driver could have no initialize the boot device (usually a hard drive). Initialization of file system may have failed because it does not recognize the data on the boot device. In addition, repartition the system partition or installing a new SCSI adapter or disk controller could encourage this error.

  This error can also occur because of incompatible disc material. If the error occurred in the initial configuration of the system, the system have maybe installed on an unsupported drive or a SCSI controller. Some controllers are supported only by the drivers that are in the library of drivers Windows (WDL). (These drivers require the user to perform a custom installation.)

  Resolution

  This error always occurs during the startup of the system. This error often occurs before the debugger connection, kind of debugging can be difficult, if not impossible.

  Fix a defective boot device: If a boot device is at fault, you must change the boot options. For more information changing these options, see Software Configuration on the target computer.

  Solve a problem of incompatible hard disk: If the installation program automatically detects the controller, you may have to skip the detection and the disc of the specific manufacturer allows to load the driver. Also, check the availability of updates for the firmware of the system BIOS and SCSI controller. Updates of this kind are usually available on the website or BBS of the hardware manufacturer.

  Delete all material recently added, especially of hard disks or controllers, to see if the error is resolved. If the problematic material is a hard drive, the firmware version of the drive may be incompatible with your version of the Windows operating system. Contact the manufacturer for updates. If you have removed another material element and the error is resolved, conflicts of port IRQ or i/o likely exist. Reconfigure the new device according to the manufacturer's instructions.

  Confirm that the hard disk drivers, hard disk controllers and SCSI adapters are listed in the list of the products tested Microsoft Windows market.

  If you have recently added a driver, restart your computer, and then press F8 to character-based menu that displays the choice of operating system. In the menu of Advanced Options , select the last known good Configuration option. This option is most effective when you add a single driver or service at a time.

  In addition, check your computer for viruses using any update, commercial software that examines the Master Boot Record of the disk hard antivirus. All systems of Windows files can be infected by viruses.

  This error can also occur due to corruption of the hard drive. Run Chkdsk /f /r on the system partition. You must restart the computer before the start of the analysis of disk. If you cannot start the computer due to the error, use the Recovery Console and run Chkdsk/r.

  If you cannot start the system in the last known good configuration, you should try to boot from the Windows CD. Then, you can run Chkdsk from the Repair Console.

  Warning   If your system partition is formatted with the FAT file system the long file names that use the Windows operating system could be damaged if you use Scandisk or another MS-DOS-based disk tool to verify the integrity of your hard disk from MS-DOS. Always use the version of Chkdsk that matches your version of Windows.

  If your system has SCSI adapters, contact the card manufacturer for updated Windows drivers. Try to disable sync negotiation in the SCSI BIOS, check the wiring and the SCSI ID of each device and confirming the proper termination. For IDE devices, define the IDE port integrated as primary only. Also check each IDE device for setting good master/subordinate/stand alone . Try to remove all IDE devices except for the hard drives. Finally, check the system log in Event Viewer for additional error messages that might help identify the device or driver that generated the error.

  BCCode: 7B 0x0000007B<-- read="" this="">
  * 1138.html? order = votes http://www.faultwire.com/solutions-fatal_error/Check-for-viruses-on-your-Computer-0x0000007B-

  =================================================================

  If you do not have a Windows 7 disc, you can borrow a friends because they are not a copy
  protected. The manufacturer of your system will also sell the physical DVD cheap since you already
  Clean Windows. You can also do an ERD on another computer.

  Try the Startup Repair - (if at anytime, benefit you from some, but not full access coming to Windows
  return and then try to startup repair.)

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Try the disk Options recovery or Windows 7 startup repair.

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  Also from the command PROMPT on the Console (if possible) recovery or a Windows 7 disc

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  Retry After Chkdsk startup repair.

  If after those you can try the system restore to fashion without failure or the valuation or Windows 7
  disc.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  --------------------------------------------------------------------

  If you need to repair disks - these help repair Windows not re-install.
  Often an ERD will help you when the recovery disk does not work.

  Download Windows 7 system recovery discs - charge now $9.75 for ISO
  images to make the discs.
  http://NeoSmart.net/blog/2009/Windows-7-system-repair-discs/

  How to create a Windows 7 - free system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  ======================================

  If necessary:

  What to do if Windows does not start correctly
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• MY LOCAL DISC D, E, AND F HAVE DISAPPEARED

  MY LOCAL DISC D, E, AND F HAVE DISAPPEARED

  Hello

  ·         Will there be any changes made prior to this issue?

  Step 1: Check if the drives are displayed under disk management:

  (a) log on as an administrator or as a member of the Administrators group.

  (b) click Start and then click Control Panel.

  (c) click on performance and Maintenance, click Administrative Tools, and then double-click computer management. In the console tree, click Disk Management.

  NOTE: You can also click Start, point to run, type diskmgmt.msc, and then click OK.

  (d) in disk management, disks and volumes of the computer are displayed in a graphical view and a list view.

  (e) to customize the display disks and volumes in the upper and the components below the window, click view, point on top or to the bottom, and then click the view you want.

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.