HP-P7-1414: upgrade memory problem.

Similar Questions

• Problems upgrade memory ThinkPad Yoga 11th 20 d 9

  I recently bought a 20 d model 9 11th Yoga and so far I'm in love.  However, I wanted to upgrade memory 4 GB to 8 GB.  I bought 8 GB Crucial single DDR3 1600 MT/s (PC3-12800) as all the reviews I read said it was OK to use, however, every time I install the memory, and I try to charge the laptop at the same time it crashes.  I can run windows 10 perfectly without a problem until I have try to load it.  I can load cell ther when the laptop is turned off, but for the life of me I can not do coexist.  The original of the ram, I installed and everything works perfectly.

  Even if I'm in the bios, as soon as I plug the charger that will crash the laptop.  There literally rips on the screen and everything vanished.  As soon as I unplug it, the laptop works perfectly.

  I went back the memory and got a replacement and it does exactly the same thing.  I've updated the BIOS and the firmware for the battery.  I'm out of ideas.  Any help would be appreciated.

  I finally found one that works:

  http://www.Amazon.com/Kingston-Technology-1600MHz-PC3-12800-KVR16LS11/DP/B00CQ35HBQ?ie=UTF8&PSC=1&Re...

  So far no problem, I can plug into a fine, and the system shows 8 GB.

• New PPr upgrade and memory problems now

  I upgraded my version of PPr CC 2015 20 days ago and I went back to make a project that I had previously worked on and made more than 3 weeks. Now, it will not be made and the computer is just running out of memory and encoding is abandoned. I am on Windows 7 with a 2 years old i7 processor and have been able to use the first Pro CC 2015 without problem until the upgrade to the latest version that came out about 20 days ago. Are there bugs that are being developed here? Thanks for any info. I had the project made out by removing all effects to make sure it was a memory problem and quite sure the file render out with effects off the coast. However, I could make with effects on before this update.

  Thanks for you response Brian.

  Can you remove the effects of light and then give it a shot? Effects of light seem to be common with those who have reported this problem.

  Thank you

  Regalo

• Upgrade memory PC 2 GB to 4 GB - problem with Indesign CS4

  I use Indesign CS4 on a PC (XP Professional SP3) that has 2 GB of memory. InDesign would go, but it has been slow, so upgraded to 4 GB. InDesign is running, but when we try to cut the text on one application and paste it into the document Indsign, he hesitates for a second or two before finishing the task.

  Is there some settings in Indesign to be considered in the upgrade memory? Any help or thoughts on this would be appreciated.

  I don't think that the problem is caused by InDesign.

  Look at this link http://coreldraw.com/forums/p/7802/64716.aspx

  Concerning

• Upgrade memory (over TP. R40e) problem

  Hello!

  I tried to increase the RAM on my ThinkPad R40e to 768 MB (now it has 256 MB) with module of 512 MB but computer recognized only half of the new memory module capacity.

  Module has 512 MB DDR400 (new) and it was made by "takeMS".

  (CL 3, 2.5 V, 4 'chips' on each side a - 8 to the total/2 sides)

  Since it was of DDR400 (PC 3200), this memory downgraded successfully to DDR266 (PC 2100) but only half was recognized - 256 MB!

  So, my questions are:

  1. is it possible to upgrade memory to 768 MB (256 + 512) with different types - DDR266 and DDR400

  (a few MB less because it has an integrated graphics card)?

  2. what brand/type of 512 MB of RAM can I use for this model of ThinkPad R40e?

  (according to IBM/Lenovo maximum capacity is 1 GB of RAM - 2 x 512 MB)

  Computer: IBM ThinkPad R40e, model: 2684 (celeron 2.2 GHz, RAM: 256 MB DDR 266, HARD drive: 30 GB, combo)

  Thank you!

  PS Sorry if my English is bad.

  I found a solution.

  I upgraded the memory on my ThinkPad R40e!

  Here is the solution:

  1. I have upgraded the BIOS to the latest version.

  (Before update BIOS it is necessary to check the Embedded Controller Progam version and update to the latest version before upgrading the BIOS)

  All the drivers and software for R40 and R40e are here: http://www-307.ibm.com/pc/support/site.wss/MIGR-46024.html

  2. I bought 512 MB DDR RAM PC3200 - 400 Mhz (in my case, the memory is Kingston ValueRam: KVR400X64SC3A/512).

  This ThinkPad uses PC2100 and PC2700 memory I bought is backward compatible (and cheaper)

  It is important that this computer will only recognize memory that has 4 chips on each side!

  I hope this can be useful to someone!

  Good bye

  M.

  P.S. Thank you George 'shark' 66 (within my means country word "gear" - shark) for your help and your messages!

• Problem upgrade memory R61i - PC does not

  Hi all

  today I installed upgrading memory 2 x 1 GB on my R61i (7650-A6G), replacing it with the 2 x 512 MB standard memory.

  When I tried to restart the notebook nothing happened: only 4 "beeps", the screen is dark...

  I had to reinstall the standard memory of 2 x 512 and everything was OK

  How can I do to make this upgrade successfully?

  Thank you very much

  Piero

  Thank you very much! following your suggestion, I discovered that a stick does not work; I'll ask the stick for a new provider.

  Piero

• Upgrade memory on NB300-108

  Looking to upgrade the RAM to 2 GB on my NB300-108

  Have you looked at the website of Toshiba and the cost, but there seems to be a plethora of alternative sites with upgrades memory compatible when I put in the part number.

  Would like to receive experiences in the forum about alternatives etc.

  Thank you

  Hello

  The laptop supports DDR2 800 MHz SO-DIMM or PC2-5300 (DDR2 667 Mhz) modules.
  These modules are provided by different companies.
  There are good quality modules and less quality modules

  Of course, you can choose and buy the cheapest, but in this case, you use the risk of compatibility problems.

  I made good experiences with RAM from Kingston. These are of good quality and not too expensive modules

• Satellite Pro 2100 - upgrade - upgrade memory RAM

  Hello together!

  For your information:

  Upgrade memory today to 2 Toshiba Satellite Pro 2100 (1.9 GH, 256 MB DDR - RAM initially), both up to 1 GB, all fine and no problems.

  Wanted to just end rumors "only 512 MB all together" or even less.

  If you are looking for, don't forget to think of the specifications:

  DDR-266 (PC2100)
  DDR-SDRAM, SO-DIMM
  200 PINS
  2.5 CL

  concerning the frequency of the RAM, building shape etc.

  Greetings

  L0nestar

  P.S.: Don't think that a debate is necessary, thread could be closed...

  According to the specifications of the computer laptop Satellite Pro has two memory slots and can be upgraded up to 1 GB. It is very useful to have confirmation on the RAM upgrade for this model of laptop old but still good.

  Good day.

• upgrade memory in a Portege 3410ct

  I tried installing memory of 128 MB PA3034u 3410ct, but on commissioning a message comes up saying that the ACPI BIOS is not fully compliant with the ACPI specification.
  I downloaded the latest BIOS setings but makes no difference. Will not start just yet. Clues as to correct the problem, other that not upgrading memory.

  Hello!

  This problem may occur if you add the memory (RAM) to the computer when it is in hibernation.

  When the computer comes out of hibernation mode and load the file Hiberfil.sys, Microsoft Windows detects the change in the State of the memory, and then you receive the error message.

  To resolve this issue, restart your computer.

  If the problem persists, start the computer by using an emergency boot disk, and then delete the Hiberfil.sys file.

  Good bye

• Firefox 4 beta too slow / crashing after upgrade memory?

  Hello

  my beta firefox started crashing my whole system yesterday and only noticeable change I did was upgrade memory of 3 to 4 GB of RAM...

  I tested my system widely and it works very well until firefox is started, after that, the system started crashing and takes forever to be reactive. I uninstalled and reinstalled firefox, tried running without addons, I tried to close all the tabs and all Eske I remembered... still no luck.

  I am desperate because I really wanted to keep this beta on my computer, and cuz is a new facility, I can not install firefox 3.6 on side by side, I only have an option 'upgrade' on the installation wizard...

  What can I do to fix this?

  Thanks in advance!

  The steps to troubleshoot and diagnose problems of Firefox would say you always try in questions to troubleshoot Firefox in Safe Mode of course some additional software may conflict, it is even more likely if you are using a beta version of firefox and probably the beta or alpha some of the addons or plugins.

• Re: upgrade memory Satellite M70-159

  I have the Satellite m70-159 with 512 RAM and you want to upgrade memory.
  Is ddr2 sdram so-dimm PC5300, 667 Mhz kingston 1 G memory compatible with my laptop?
  I know that this memory will run as PC4200, but I don't know where to buy PC4200.
  Thank you.

  The Satellite M70 can be upgraded to 2 GB of RAM.

  The Kingston RAM must be compatible with your laptop because Kingston's high-quality RAM and many users here upgraded with modules from Kingston.
  And as you say that the RAM will work as long as PC4200, it is not a problem.

• Satellite Pro A60 - memory problem?

  I have a machine at 3 years which became progressively slower, especially at the start. I installed original specification and use the installed MS Firewall and Antivirus it.

  Opportunities, with more than 1 window/application open, the screen freezes during use. On other occasions, I get an error message (something like) "Out of Memory Line 56", press OK and then displays the information.

  I wonder if an upgrade memory will solve these problems? Thank you

  Hmmm, you can simply test the memory using the freeware as Memtest86 +.

  > was wondering if an upgrade memory will solve these problems?

  Upgrade memory always improves the performance of laptops.
  But the question is whether this problem is related to the fault memory or to of memory performance.
  For me, it looks like a malfunction of memory.

  Try to remove a module, and check if the same error message using that one module of memory.

• Satellite L100 113 starts slowly after upgrade memory

  Hello

  Toshiba Satellite L100 113 PSLA3E-02401JRU starts slowly after upgrade memory with Kingston KTT533D2-512 (512 MB) of memory.
  When I press the 'power' button, it flashes, starts the fans and HARD drive several times. Then it shows BIOS start messages by memory full 768 MB and starts Windows XP without a problem.
  This behavior is noticed only after "shut down."
  It does not happen with "restart".
  What can I do to eliminate this long "attempts" to start my laptop computer?

  Thank you
  Novomir Kovalenko

  Hello

  This problem appears before upgrade memory?
  Have you used exactly the same memory modules?
  If this isn't the case, then perhaps there are a few compatibility issues.

  Usually, after the insertion of the modules you must enter the BIOS and then save the settings. Please it and eventually the laptop will start without any problems.

• Upgrade memory - 4100XCDT

  Hello
  I am the proud owner of a 4100XCT satellite.
  I have upgradet the HARD drive on a 30BG drive.
  I also tried to upgrade memory (RAM live) but the 256 MB Dimm PC133 so-built by A-Data, with I ordered seems not to be compatible with the laptop. (The system no longer starts when the new RAM is installed.)

  An update of the BIOS would help solve this problem?
  And: RAM that is compatible with this laptop? (Is there a witch of memories 256 MB are compatible?)

  Thanks for reading.

  Hi Katzenfreund

  The nice thing about Toshiba and memory upgrades, it's that we don't need to think about what technology or the speed to use. Just use original (recommended) or search in the referencetable of the provider to use, their module that is compatible with the partnumber Toshiba memory you want.

  Toshiba PA-numbers for the 4100 are:
  PA3004U - 64 MB
  PA3005U - 128 MB

  Good luck

  Tom

• Upgrading memory on Satellite Pro L40 - 15A

  Hello

  I have the Satellite Pro L40 - 15A with 512 MB of memory (Samsung), but I'm not going to 1 GB. I have Kingston ktt667d2 / 1 g I tray to put into the two slots, but nothing works I can't spend on computer.

  But when I change to old laptop is ok. What can I do? Install special program update the BIOS, or maybe the memory stick is broken.
  Concerning

  Hello

  Safe computer laptop doesn t after upgrading memory due to these different problems;

  -memory modules are not compatible set
  -memory modules are not compatible with the laptop
  -memory modules are defective
  -a memory slots is defective

  In most cases, replace the memory module helps.

  A hint; have you tried to move the modules of memory in the slots? Sometimes it helps.
  A few weeks ago I updated my memory and safe laptop didn t.
  I thought that it s a malfunction of memory, but after the switch module Notepad started successfully.

  Good luck