change module cause some ports of a server in offline mode

Similar Questions

• VPN connectivity to a server in offline mode.

  Hello all,.

  I'm putting the VPN site-to-site standard between two sites. Site A and B.

  A site has a server (SeverOne) and site B WILL have a server (ServerTwo).

  Now Im trying to put in place the VPN tunnel in scathing a NONEXISTENT Server (ServerTwo) of the ServerOne at this stage.

  SO the question is this tunnel will come even if site B server is still not online? So far, my tunnel is failed the phase 1.

  Thanks in advance

  SO the question is this tunnel will come even if site B server is still not online?

  Absolutely... tunnel should always come even if the host at the other end does not respond... you should always see the phase 1/2 full and note in the output of (isakmp crypto to show his) in your firewall tunnel State as QM_IDLE and see the tunnel peer address as well as your address of tunnel... you want to only see crypt but none decryps in the output of (see the crypto ipsec his) when sending pings to a system which is not online... so if your tunnel makes as much as phase 1, something is wrong, either in your strategy ike is not or peer not responding do not...

• Can I configure some ports on FI-6200UP GEM as server ports?

  Hello

  I need your help!

  I know that FI-6100 can't be configured its some port on GEM as the server ports.

  Is it possible to configure ports on FI-6200UP GEM server ports?

  And I wonder too, some ports(1/9-16) on a (Second) group of port can be configured as a server port(1/9-10) port(1/11-12) ethernet uplink, FCoE port(1/13-14) and FC port(1/15-16).

  Thanks in advance.

  Paul

  Hello Paul,

  Yes, you can configure the server ports on expansion on FI 6200 series modules.

  http://www.Cisco.com/en/us/docs/unified_computing/UCS/SW/GUI/config/Guide/2.1/b_UCSM_GUI_Configuration_Guide_2_1_chapter_0110.html#concept_A552AD7757A549FB82D16A07D0EDA1E4

  --------- snip ------------

  All port types shown are configurable on both the module fixed and expansion, including the server ports that are not configurable on the fabric of the 6100 Series expansion module for interconnection, but can be configured on the fabric of the 6200 series expansion module interconnection.

  ----------------------

  HTH

  Padma

• I get this error message 'some files on the server may be missing or incorrect. Clear the cache of the browser, and then try again. If the problem persists please contact author Web site. »

  Some files on the server may be missing or incorrect. Clear the cache of the browser, and then try again. If the problem persists, please contact Web site author.  But all the content loads correctly, and it just seems to be an annoying error message.  Does anyone know how I can get rid of this or that which is the cause.  Site is: http://davidkimlaw.com

  You solve the symptom and not the problem. If something is to change the files after they are exported from Muse, the consequences could be vast and varied download to download.

  Don't the accordion on the 'AREAS' jobs page widget if this file exported (and unaltered) opens in the browser on your local computer? It doesn't seem to work on the online site, which could be linked to the questions of the error was about or may be an offshoot of some hand changes were made after export.

  If you empty the re-export of Muse in a folder and then download the same files, I'll take a second look at what's going on. If you wish, you can you could do that in a subfolder so as not to disturb the live site. (When I detected that the index.css file is out of sync I was on my phone and could not go any further.)

  There is also more information about the possible causes of this error here "some files on the server may be missing or incorrect" Warning Message>.

• How to configure a port as the port of the server

  I'm new to UCSM,

  What are the steps for configuring a port in the ports of the server.

  Step 1 in the Navigation pane, click the Hardware tab.
  Step 2 tab in the equipment, develop interconnections > Fabric_Interconnect_Name > Module fixed >
  Unconfigured ports.
  Step 3, click on one or more ports under the Unconfigured Ports node.
  Step 4 slide the selected ports and drop them in the Ports of the server node.
  The ports are configured as server ports, removed from the list of ports configured and added to
  the Ports of the server node.

• There is a file or a folder called "c:\Program" which could cause some applications will not work correctly. Rename it to "c:\Program1" would solve this problem

  Original title: message 'warning of file name '.

  In the last week or so, I get a warning box appears on my desktop (from Windows 8) whenever I start.  He said "there is a file or a folder called"c:\Program"that could cause some applications don't work does not correctly."  Rename it to "c:\Program1" would solve this problem.  You want to rename now? "and there are 2 options:"Rename"or"ignore ".  I have "Binged", and there are a few very old discussions about it (like 5 + years ago) and the consensus seems to be that it is a matter of Windows.  What should I do to get rid of him?

  OK, so here is how I SOLVED this problem.

  In my case while studying this on a device of clients, I found that a VOIP program caused this problem and the error message popped up, and rename the folder won't work because the program is running.

  Then I found the voip program (in the taskbar in this case) and closed. I then found the file that needed change of name, "c:\program" and renamed to 'c:\program1 '.

  Then restarted the computer and... Don't pop up.

  I hope this helps.

• PB with Muse «some files on the server are perhaps missing...» »

  Hi all

  I pages for doing web with Muse for some time.

  I just create a complete http://nikonosv.free.fr/Botswana2017/

  I ask Muse publication on my server, but a message will appear at the opening of the site.

  ""Some files on the server are perhaps missing or incorrect. " Cirklo the cache of the browser and try again. If the problem persists, contact the creator of the site'

  The page appears, without images, page or put in. Just plain text.

  If I check my server, all files are present.

  If I professional my files, no no with space or accented sign (I read on this forum that could cause this type of problem)

  On the other hand, if I ask a publication on my hard drive, I have no problem opening.

  I'm on Mac OS 10.11.6 and plug-in Firefox and Safari as browser

  That is, I a solution I hope someone will have

  @mcalement

  Serge

  See the following messages, where a similar question was examined.

  Some files on the server may be missing or incorrect

  "Some files on the server may be missing or incorrect" Bug

  Some files on the server may be missing...

  Thank you

  Preran

• Only in Chrome - «some files on the server may be missing or incorrect...» »

  I get the following error message on a site I'm building:

  "Some files on the server may be missing or incorrect. Empty the cache of the browser, and then try again. If the problem persists please contact author Web site. »

  This error only appears in Chrome. It does not appear in firefox or IE. Once I click 'ok' to clear the error the site load correctly.

  The site in question is www.auravana.com. The error appears on the home page as well as on other pages.

  I removed the document created by Sanjit_Da on the subject ("some files on the server may be missing or incorrect" Warning Message ), which was created in January of 2015. I was not able to determine the cause of the error by using the document. I also searched the forum for an answer, and although other people have had similar problems, none of their answers have helped me solve this problem.

  I do not use BusinessCatalyst. In Muse, export the Internet site 'in HTML format. I then all zip files and upload them to the server. Miss me not all the files and I'm not running in all conflicts. I have reviewed the homepage in the console of Chrome to see if there are errors, and there are no errors.

  I don't know what else to do. Any help is really appreciated.

  Yes that's right, the widgets must be updated by their developers as soon as the new update of Muse free.

  So please try to contact your widget developer and ask them to update widgets fo Internet Explorer.

  Best regards

  Ankush

• Some files on the server is maybe missing or incorrect... after updating Adobe Muse

  I just recently updated to the 2015.2 Muse and now one of my sites (which was working fine before the update) now gives me the error message.

  Some files on the server may be missing or incorrect...

  "And the message: JavaScript exception: error by calling the selection function: TypeError: cannot read property 'msie' undefined '.

  This had not happened before and now I can't download or push all new living changes because of this error.

  Can someone shed light on this please? I desperately need to get a new live version with updates but cannot until this is rectified.

  Karen

  Hi Karen,.

  Thank you for reaching out to us on this subject.

  The problem occurs because some third-party widgets used in the site that load a lighter version of jQuery, which does not include a browser (jquery.browser) detection method, which is needed for the sites of Muse:

  Then to get rid of this problem, you must remove any third-party widget first and then upload your site.

  If you wish to continue using the third party widget, we recommend you reach out to the third party and inform them that, "if they want to load another version of jQuery that Muse loads by default they should load the entire library".

  Yet, we recorded this bug, and you can expect a fix in the next update.

  Best regards

  Ankush

• PS ask activetion again. the worm is first CS PS v8, it fails, I tried to call help number given on the page but service does not exist, redirect to .../go/activation statement fails, it causes some assistance - activate is not possible to click

  PS ask activetion again. the worm is first CS PS v8, it fails, I tried to call help number given on the page but service does not exist, it redirects to .../go/activation

  statement fails it causes some assistance - activate is not possible to click

  Adobe has disabled the server activation for pre CS3 products a long time ago and that's why you are unable to activate your product. I can not to suggest what to do, but I don't know that CS2 owners with this problem can download a version specially created that doesn't require activation. To my knowledge, no such version exists for CS. If it was me, then as the real owner of the software and just unable to use it due to having no mechanism to activate, I download CS2 and use it until someone from Adobe told me to stop. It is a sensitive issue because the download site clearly indicates that there must be an existing CS2 owner. However, the url to the download was posted the pirate not many Adobe Web sites not as a way to free download the CS2. I imagine that there have been hundreds if not thousands of downloads from 2013 when it became first available and so far Adobe has not made any attempt to restrict the download to current owners of CS2. Their policy is quite clear if CS2 is not given away for free. Fortunately, I use CC2015, I can't make a call on it, but the URL is below if you want to move forward.

  Download Adobe Acrobat 7 and Adobe Creative Suite 2

  Terri

• Why lightroom says "an error has occurred." trying to change modules

  I am trying to download some pictures on LIGHTROOM 2015 CC - and when I click on the library, he said: "year error occurred while trying to change modules ' what have I done wrong?

  [Ask in the correct forum allows... Left comments for Lightroom... MOD]

  Hello

  This problem normally occurs when the files of Adobe to launch Lightroom do not have read/write permissions.

  Please follow this article changing the error modules and grant permissions to required files

  Here's a double thread Lightroom: "an error occurred when attempting to change modules."

  Let us know if this helps

  ~ Assani

• How can I fix error of muse "some files on the server may be missing or incorrect."?

  I created a separate page out of php, one for the Office site for the mobile version of the Web site.

  There is No error message when you use the desktop version of the Web site (SESSION TIMES) However, there loading the mobile version (SESSION TIMES)
  

  I changed the message to something else, but the original was "some files on the server may be missing or incorrect. Clear the cache of the browser, and then try again. If the problem persists please contact author Web site. »

  I don't want to remove this error because I've already tried looking for missing files, etc.

  The "missing" file was found when using the '? muse_debug = true' after the url, this can be seen in the following two tables. This file is located in the main public_html as well as I did in other sup files

  as I tried to get the script to find somewhere I thought putting it anywhere would be an option.

  

  )

  What I want to know is this is a bit of php, html or js that I can add to make it disappear and stop the pop up of projection, no patch solves the problem but it ignores

  Thank you

  Dale

  That's the problem with Muse. It's for people who don't want to mess with the code. But it seems that you or whoever created the site for you made a lot of tinkering with the code.

  I don't know how Muse structures pages and assets, but by looking at the error message, this is the style sheet that is missing.

  There are two ways I think you might be able to solve the problem. The first method I suggest is to include a link to the style sheet. For now, you link only the master styles.

  http://avocabeachpicturetheatre.com.au/phone/CSS/session-times.CSS"/ >

  If the page is not correctly displayed, delete the link to session - times.css and modify the script at the top of the page to remove session - times.css of the list:

• Error message: some files on the server may be missing

  Hello, I hope someone can help. I just installed Zopim (chat program) on the Web site of the client, built in Muse and they say they are getting an error message:

  Some files on the server may be missing or incorrect. Clear the cache of the browser, and then try again.

  I have read some of the previous posts and have improved Muse to the latest version, I use "Publish" to publish the files to the catalyst for business. This last time I chose to download all the files, and they are still getting the error. They work on a pc and I believe that they use Explorer as their browser. I use a mac and have checked their site on Safari, Chrome, and Thunderbird, and I do not get the message.  Is this something that is on their computer or something in Zopim code maybe? I just tried it on a pc in my office, on explore and do not get the error.

  Any help that anyone can give would be greatly appreciated.

  Sincerely,

  Annette

  UPDATE: so now my client informs me that they have noticed the problem a few weeks after I've made further changes, so he probably didn't have anything to do with Zopim. On 4 computers, only 1 receives the error. PC running explore and it was restarted recently, if that's any help. Don't know what to tell him.

  Hello Annette,.

  Have you checked this document

  "Some files on the server may be missing or incorrect" Warning Message

• I always get this message: some files on the server may be missing or incorrect. Clear the cache of the browser, and then try again. If the problem persists, please contact Web site author.

  It seems to happen whenever a update of Muse coming...

  I'll transfer my site and when I visit it I get this message even that was supposed to be resolved there are a few versions:

  "Some files on the server may be missing or incorrect. Clear the cache of the browser, and then try again. If the problem persists please contact author Web site. »

  I use the latest version of Muse: 2014.3 release

  I looked at my list of assets within the Muse - nothing is marked not linked.

  I tried to upload my site many times... within the Muse and with FileZilla.

  Fortunately, I have saved the latest version of my site - which was created in the version prior to 2014.3 - and downloaded again.  It works and can be seen here: www.snapscene.ca.

  But as soon as I make all the changes file of Muse, save it under a different name (to be compatible with 2014.3) and upload it - I get the message when visiting the site.

  What gives?

  -Adrian

  It seemed to me the solution.

  When I export the files, I simply left Muse overwrite the files in the destination folder. The files may not overeritten correctly.

  Manually, I went into this folder destination and destroyed all the old files exported.

  I then re-exported the files and then uploaded. All workes from there.

• question to change modules

  Hello everyone

  I had to reinstall LR and whenever I start it now, I get an error message saying "year error occurred so that they were attempting to change modules. I get a grey-white screen, without side panels, but basically, it lists the number of photos is in the catalog and in the folder. There is no film. By clicking on Preferences does nothing; without dialog boxes or anything like that. It allows to launch very well.

  OSX 10.9.5, the question of the only software I had is not able to update to Yosemite.

  Any suggestions?

  Thank you!

  joHN

  There is a good list of possible workaround here:

  Error changing modules | Lightroom

  That's what fixed (I think. I hope!) for me:

  Solution 5: Set the correct permissions on the Lightroom Application Support folder

  NOTE: Use this solution if you are asked your serial number after you restart Lightroom after getting this error.

  The Lightroom inside the Application Support folder may have the wrong permissions prevent Lightroom to write to what may cause this error.

  • Navigate to the following folder: /Users/ [user name] / Library/Application Support/Adobe/Lightroom
  • Highlight the Lightroom folder and chose file > information
  • Under sharing & authorization, check that your privileges of reading & writing. Otherwise, click on the padlock icon at the bottom right, enter your password when prompted, then click the only entrance to reading and select read & write.

  Important: (Mac OS) Apple made the library folder user hidden by default with the release of Mac OS X 10.7. If you need access to the files in the related troubleshooting Adobe library hidden to perform folder, see How to access the hidden user library files.