Similar Questions

• Autonomous AP521 can be configured for authentication WPA/TKIP with no radius server?

  The AP521 can be configured for authentication WPA/TKIP with no radius server?

  the datasheet, wpa with tkip and wpa2 with aes are supported.

  you want to use (no RADIUS) wpa - psk with tkip. WPA2-psk aes and tkip not use.

• I can't delete some files that I uploaded to the server. What should I do?

  I can't delete some files that I uploaded to the server. I get a notice: FTP an error occurred - cannot delete the PDF download server folder. Operation failed. The directory is not empty, or there may be a permission problem.

  What should I do?

  Try to delete the files in your folder first.

  If there is a permissions problem on the server that you cannot delete files, you need to contact your Site Administrator (if you have one) or your Web hosting provider.

  Nancy O.

• How can I configure a port Ethernet NI9792 gateway to communicate with a cRIO CAP?

  Salvation OR engineers,

  I intend to use my gateway NI9792 in the following way:

  1. a single Ethernet port for network connection. That's how I'm developing, download the software and monitor my request through my PC in my office.

  2. the other port to communicate with a cRIO device? If so, how can I do it?

  It seems to be a stupid question, but I really couldn't work this!

  Thanks in advance,

  Luiz

  Good afternoon, Luiz

  Follow the first link to guide the module which can be used and other links to the best part of bore configuration CRIO. For any question, please contact us.

  How to set my time on the NI WSN-9791 or NI 9792 gateway server?

  http://digital.NI.com/public.nsf/allkb/44FA322FAFF8D58D862575BD00591A54?OpenDocument

  Configuration and NI WSN product guide
  http://zone.NI.com/DevZone/CDA/tut/p/ID/8710

  Configure the Ports of double Ethernet on real-time controllers

  http://digital.NI.com/public.nsf/allkb/67F94BB93BCE32CF86257367006B3659?OpenDocument

  video installation and installation CRIO

  http://www.NI.com/SWF/demos/us/cRIO/outofbox/

  Automatic configuration of network for the cRIO-9073 and cRIO-9074 CompactRIO controllers

  http://digital.NI.com/public.nsf/allkb/37C790309A210A748625757000570938?OpenDocument

  Sincerely,

  Mauro Vera.

• URL redirects can be configured with XE, and what is the HTTP Server

  I wish I could the URL redirects. I'm under XE with Application Express 2.1.0.00.39.
  
  I want to be able to have a URL like www.schoolwebsite.com and when the user presses on it - have redirect to the page of the Apex for the application. I thought I had to use a redirect in the configuration file HTTP and that XE used Oracle_HTTP and I have set up this way.
  
  But I can't find an Apache Directory.
  
  1. what HTTP server is used with XE and Application Express 2.1.0.00.39?
  2. can I set up for this type of redirection?
  3. do I need to install a HTTP server for this?
  
  Thank you
  Stephen

  If you want to achieve without a separate http server, follow this discussion:
  Re: Default Page

  Kind regards
  ~ Dietmar.

• Can I configure different port on the VIP and the real servers with ACE20 module?

  I use two Modules ACE20 of Cisco with catalyst 6504.

  There are two real servers that runs three services - TCP 82, 83, 84-connects to ACE20. (I'll call Server real 1.1.1.1 and 2.2.2.2)

  And I will assign three different personalities for each services - 3.3.3.3 for TCP 82, 4.4.4.4 for TCP 83, 5.5.5.5 for 84 TCP.

  In this case, what I can config my ACE20 as following configs?

  3.3.3.3:80 VIP

  RIP 1.1.1.1:82

  RIP 2.2.2.2:82

  4.4.4.4:80 VIP

  RIP 1.1.1.1:83

  RIP 2.2.2.2:83

  5.5.5.5:80 VIP

  RIP 1.1.1.1:84

  RIP 2.2.2.2:84

  PS My ACE20 'sh worm' result is here:

  Software

  Charger: Version 12.2 [123]

  system: A2 (2.4) Version [3.0 (0) A2 (2.4) of generation]

  system image file: [LCP] disk0:c6ace - t1k9-mz. A2_2_4.bin

  Hi Jinuk,

  Yes you can do it.

  You just need to set the port for the server to book in the serverfarm configuration.

  Book host Serveur_01

  IP 192.168.1.11

  development

  Serverfarm host REAL_SERVERS

  TCP probe

  Book Serveur_01 82

  development

  You can configure VIP to port 80, then once the strategy maps are configured the customer demand should hit the ACE on VIP on port 80, and CEA loadbalances once the traffic it will send to the book port 82.

  Let me know if you have any questions.

  Kind regards

  Kanwal

• Configure two Ports on an ASA5510 with 2 different inside networks

  How can I configure two ports on an ASA5510 (version 8.4 (5)) or with 2 different inside networks out interface or two inside and two on the inside outside routing to an outside and inside another for the rest outdoors?

  Specifically, I had all three interfaces with dhcp and basic configuration of all, I got one (10.1.0.0) inside out successfully from the internet (208.83.73.193 for example), but I'm not sure of the second internal interface (192.168.1.0) out to the internet.

  I need VPN or any connection between the two internal networks.

  This is the basic configuration of may:

  interface Ethernet0/0

  nameif Internet

  security-level 0

  IP 208.83.73.x 255.255.255.240

  interface Ethernet0/1

  nameif inside

  security-level 100

  IP 10.1.1.1 255.255.0.0

  interface Ethernet0/2

  Guest Network Interface Description

  nameif GuestNetwork

  security-level 100

  IP 192.168.1.1 255.255.255.0

  Route Internet 0.0.0.0 0.0.0.0 208.83.73.206 1

  Route Internet 192.168.1.0 255.255.255.0 208.83.73.206 1

  dhcpd address internal 10.1.5.100 - 10.1.5.254

  dhcpd dns 10.1.2.7 10.2.1.200 internal interface

  dhcpd wins 10.1.2.7 interface internal

  interface of lease 432000 dhcpd internal

  field of dhcpd

  xxx.xxxxx.xxxx.gov

  internal interface

  enable dhcpd internal

  dhcpd address 192.168.1.2 - 192.168.1.50 GuestNetwork

  dhcpd dns 208.67.222.222 208.67.220.220 interface GuestNetwork

  enable GuestNetwork dhcpd

  network object obj - 10.1.0.0

  dynamic NAT interface (internal, Internet)

  I tried to configure nat for the guest network the same way that I have it set to the 10.1.0.0 network and also nat static and that it did not work (maybe I did wrong).

  If get this accomplished is possible I would very much apreciate a configuration example of what do I do

  Help, please

  I also found this two articles from Cisco that applies to the ASA Version 8.3 and I guess she could apply to Version 8.4 (5), please let me know if yes:

  http://www.Cisco.com/en/us/products/ps6120/product s_configuration_example09186a0080b7c939.shtml

  http://www.Cisco.com/en/us/products/ps6120/product s_configuration_example09186a0080b1ee95.shtml

  Thank you

  two inside networks to one outside is no different to a demilitarized zone and inside outwards. Both come from a security level higher and go to a lower level of security. In your case, there is the second inside network for guest users, I would use a lower level of security as the guest network is probably not as trustworthy as the internal network.

  The second requirement (two inside and two outside) would need a form of routing that the ASA does not support the way in which you want to use based on policy (there are some hacks with NAT, but it's really horrible). That you could use for this are security contexts. A context with inside1/outside1, the other context with inside2/outside2. Here, you can easily route traffic inside2 to outside2 and inside1 to outside1.

  --
  Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
  http://www.Kiva.org/invitedBy/karsteni

• How can I put the Windows XP firewall in a port configuration 'allow all' and only block some ports?

  Without going into the details of why I need to do this, I'm putting the firewall of Windows XP in one allow all the configuration of ports and only refuse some ports I have in a list.

  I train this script via the command-line batch with the netsh firewall add portopening command.  From what I've read, if enabled the firewall denies all traffic and only allows ports with exceptions, so through batch scripts, I opened all the 65 000 + ports TCP and UDP, essentially with the firewall turned on but in a configuration of "allow all the»  I don't deny the 100 or so ports to my list that I want blocked after they are all open.

  This strategy seems to work, but the problem I waited and I now see is that svchost.exe takes 50% of my CPU time, have to deal with constantly these firewall rules.

  "From what I've seen on Windows XP, there is no way to have the firewall ON, and in a configuration of" allow all the "" because the XP firewall may not have defined port ranges, they must be defined one by one.  It looks like Windows Vista or 7 would be much easier because the firewall has got a re vamp of advanced features.

  Does anyone have a suggestion on how to realize this "allow all", deny some' strategy?  I know it's a strange use of the Windows Firewall, so let's please jump in front of a 'why would you do this incredibly stupid thing?"messages.

  Also, if it was the wrong forum (or website) to post on for this kind of question, I'd appreciate a recommendation of a more appropriate forum.

  Hello

  See the steps in the following article.

  How to manually open ports in Internet Connection Firewall in Windows XP?

  http://support.Microsoft.com/kb/308127

• How can I configure reader adobe XI as one of my printer port? Help, please.

  How can I configure reader adobe XI as one of my printer port? Help, please.

  Adobe Acrobat (Windows only) comes with a virtual printer that allows you to create PDF files. The free player does not work.

• Is possible that I can paralel and configuration serial port?

  Hello

  I can not configure a com in a vmware ESXi4 port is possible?

  In ESXi3.5 isn't possible, but I think that vmware in new ESXi4 if possible.

  Thank you

  Carlos

  If you consider any comments as useful, please give points.

  ---

  MCSA, MCTS, VCP, VMware vExpert 2009

  http://blog.vadmin.ru

• CRIO controllers can be configured to accept several SNTP IP addresses?

  cRIO controllers can be configured to synchronize the SNTP servers using the following in ni - rt.ini:

  [TIME SYNCHRONIZATION]
  source_priority = sntp; RTC;
  source. SNTP. Enable = true
  source. SNTP. Address = 10.0.58.1
  source. SNTP. Interval = 60
  source. SNTP.port = 123
  source. SNTP.verbose = false
  source. SNTP.log = false

  However, more than one IP address be specified, in which case one of them goes down? I tried to use a semicolon-delimited list, but it does not work.

  Also, I wonder if the cRIO controller can be configured to accept broadcast SNTP from a remote machine, rather than send periodically SNTP requests to a remote machine.  Is this possible?

  Thank you for your help,

  Chris

  Chris:

  Unfortunately, the ini file can use an IP address to synchronize with the server. If you are looking for a method switch to a new address, your best bet is to change the routing/port forwarding IP of some material RIO is connected to. Alternatively, it may be possible pass by program files nor - rt.ini, but this requires the controller to restart.

  The cRIO does not accept remote broadcasts, either. I think the main reason is that it is not as consistent (from a deterministic point of view). The behavior and the calendar is more predictable, when the controller uses a method of request/receive, rather than waiting on a broadcast packet. The former option requires less CPU resources.

  I hope I was able to do at least some light on your question. Good luck!

• How can I configure proxy credentials to WebEngine

  Hello.
  
  How can I configure proxy credentials to WebEngine?
  
  I found how to set the port via SystemProperties and the proxy host.
  
  System.setProperty ("http.proxyHost", "some.proxy.host");
  System.setProperty ("http.proxyPort", "8080");
  
  But I couldn't find the definition of authentication information.
  
  Thank you.

  For the moment, WebEgnine provides no special support for proxy or, more generally, HTTP authentication, but relies on what the pile of java.net. * offers in this area. So, to make your application use specific credentials when connecting to a specific host, create a subclass of java.net.Authenticator, implement the method getPasswordAuthentication in it as you see fit and install an instance of your subclass as the default authenticator by calling Authenticator.setDefault. See also http://javafx-jira.kenai.com/browse/RT-19215

  Published by: Vassili Baranov on February 14, 2012 08:28

• How can I configure Firefox to automatically zoom when a site regularly?

  Some sites have a fixed width, and I like to zoom in some of them so that I can read the text better. How can I configure Firefox automatically zoom-in in some of the sites that I visit regularly?

  You can use an extension to set a page zoom and the size of the default font on the web pages.

  • Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/

• Basic HTML can only configure Firefox to automatically load the pages as "Basic HTML"?

  Will be loading the pages as "Basic HTML" load faster?
  Pages take 30 to 60 seconds, OK download at 1 MB per minute.
  Some sites, for example Yahoo Mail, have a button to load faster in basic HTML. Other sites can load it as basic HTML?
  So: Can I configure Firefox to automatically load into basic HTML if this site can be?

  (Firefox 3.6.15, Windows XP, 2 MB of RAM, ISP is satellite Hughes in Virginia, USA).

  You can consult:

  • Adblock more: https://addons.mozilla.org/firefox/addon/1865

  You must subscribe to a list of filters (for example the EasyList).

  • http://adblockplus.org/en/subscriptions
  • http://adblockplus.org/en/Getting_started

• Satellite A200-1AE: How can I configure the settings of buttons Dual Mode Pad?

  Hello

  I recently bought a Satellite A200-1AE. I tried to configure the default first button on my touch pad (lower left) so that I can fire up MSWord, but it did not work.

  Now every time I have set the mode button and press this button, that nothing not to pass - I lost practically this button.

  My question is how can I configure the mode button on the touch pad settings? Even if I was able to start a program by using the 3 buttons how can I modify these programs?

  Thanks for your help!

  p.s. I read the extended version of the manual for my laptop. There is no explanation of my problem - it says I should look "Synaptics Dual Mode Pad properties.

  I don't know where are these properties.

  Hello

  It s is not so difficult as you think, the properties of the synaptics are in the "mouse properties" of your "Control Panel" of windows. When you reach the 'mouse', then click on the "Advanced" tab and you should find a button 'Advanced functionality settings'.
  It could be that the button is not named as mine, but it must be identical.
  After clicking on it, you should look for this 'easy' Launcher in one of the tabs.

  I think that you will make it, but I'd like some feedback from you.

  Welcome them