Change of advertising for the BGP subnet

Similar Questions

• How can I change an icon for the device in Windows 7?

  How can I change an icon for the device in Windows 7?

  In 'Control Panel\Devices and printers' I want to change the icon of a device that there are listed.

  Hi Dave Tavres

  I'm afraid to say that you would not be able to change this icon.
  This icon is provided by the hardware manufacturer, and is included in the drivers and architecture has no Windows allows to change this information.
  However, you can use the third party applications to change. Use your favorite search engine to find on the Internet.

  Important note: This response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

  It will be useful.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I like the develop module, but I'm doing something wrong in the library in library, under 'Catalogue, all the photos', all my photos appear showing the stars, cropping, and development. The problem is that these changes are not for the photos on my hard d

  I love the develop module, but I'm doing something wrong in the library

  In the library, under 'Catalogue, all the photographs', all my photos appear showing the stars, cropping, and development. The problem is that these changes are not for the photos on my hard drive. When I re-import them in Lr, the changes are not there. My workflow is to do nothing after development or export them to the original with a new file name destination. Anyway, it is that they get a new file name without change of development when they are imported into Lr.  Please help (PC user)

  And others have explained, Lightroom does not apply the changes to the file. All changes are stored in the catalog, and then applied to the image when it is displayed in Lightroom. If you want a copy of the image with any changes so that you can share with others or send it to a laboratory to print, then you must export a copy of this image by using the export dialog box in Lightroom.

  Features of Lightroom as well by its design. The images that you import are always left in their original condition, unmodified.

• Inadvertently, I had a graduated filter changed all 326 images in my folder. How can I remove this change of images without affecting other types of changes, I did for the other images?

  Inadvertently, I had a graduated filter changed all 326 images in my folder. How can I remove this change of images without affecting other types of changes, I did for the other images?

  Select all images, ensuring that you are in the develop module. Auto-Sync lights up and then just delete the graduated filter. You will need to activate the graduated filter tool and click on the PIN for the filter you have defined and then press the delete key. Then, you want to disable automatic synchronization. Now, just highlight the image you want to add the graduated filter and do your thing with her.

• How to change group policy for the system restore will create restore point

  I recently installed an SSD with windows 7, it's the default OS and hard drive on a system dual boot. I also have my old HHD with windows vista home premium. I had problems using the restore of the system with the SSD drive and read on a forum that the restoration of the system causes problems when it is used on an SSD. I have disable restoring the system to the SSD, but still he had checked to allow restoration on the vista disk and a 500 GB drive, I have use for storage.

  I managed to create a restore point when you are using windows 7 OS, but when I used my vista drive, and wanted to create additional restore points for two HHD disks, it does not allow the creation of restore points by group policy settings. I regularly create restore for the SSD disk and have created one for the HHD Vista since the system restore does not create additional restore points now.

  How can I change my group policy settings to enable restore points to create the disk under Vista. I don't remember changing anything that might have caused it, is there a chance that a horse of Trojan or virus caused this? I have Webroot antivirus and currently aired Kaspersky Anti-virus on Vista drive. I also ran the Microsoft safety scanner in safe mode and normal startup mode, none of the virus scanners have found problems, so I'm pretty sure I don't have a Trojan or a virus.

  To the point, how to make appropriate changes to allow the restoration of the system to work for my two HHD disks.  Better yet is there a way to restore completely all original windows default system settings without having to do a clean reinstall.

  You can provide any help would be greatly appreciated

  Thank you

  Skyraider 33

  Hello

  You receive an error message when creating a new system for Windows vista restore point?

  Using the Group Policy Editor

  If your edition of Windows Vista includes the Group Policy Editor (gpedit.msc) snap-in,

  Follow these steps:

  1. Click Start, type gpedit.msc and press ENTER
  2. go to the following branch: Computer Configuration | Administrative templates | System | System restore
  3. double click on disable the Configuration and set it to not configured.
  Note: If the above setting is already set to not configured, set it to "Enabled" and click on apply. Return back the setting to not configured, then click on apply, OK.
  4. exit the Group Policy Editor.

  If using the Group Policy Editor do not fix the problem, try the registry fix from the following.

  Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  Using the registry editor

  1. Click Start, type regedit.exe and press ENTER
  2. navigate to the following key:
  HKEY_LOCAL_MACHINE-Software-policies-Microsoft-Windows NT------SystemRestore
  3. in the right pane, delete the value named DisableConfig
  4. exit the registry editor.

• change a password for the administrator

  I tried everything to change an administrator password, I need help

  If you are an administrator, you can change the password by...

  Start > Control Panel > Classic view > use of accounts > click on change your password...
  or
  Click account management > click the administrator account to change the password > change your password.

  However, If you are not an administrator, you cannot change admin password.

  Moeover, this forum prohibited any person to help users to bypass the password protection.

  Here's the Microsoft Policy about this:
  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/3eba3150-8742-4264-be9f-0daaad2282cd For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• The unit 3.1 (3) change of password for the Service account

  Hi all

  I am aware of the link and procedure on how to change the password of the service account of the unit 3.1 X here: http://www.cisco.com/en/US/customer/products/sw/voicesw/ps2237/products_tech_note09186a0080093f54.shtml#topic2

  My question is this. I have 5 unity servers that use this service account in any area, which includes Europe and the United States. If I change the password in AD all services will continue to work with the old password as long as they have not restarted with the old password? I know I need to change the password for each service that uses the account and then restart the unit, but since AD taking so long to reply, I was hoping to change the password of the account one day and then the next day or even longer when I have planned for my failure, I can then change the password for the services on each server and then restart the unit and make sure that replication is complete and the services start again with the new password.

  I think as long as I do not have to restart services can I change the password of the service account in AD a day or two before I schedule my outage can I change the password for all services, and then restart the unit. I know that I can force replication, but it would be nice to be able to change it in advance as long as it is not flexible, whatever it is. Even force the replication takes a lot of time in our environment and I want to be sure, can I change well in advance without having a negative impact.

  Thanks for your time!

  Keith

  If you change a password for a domain account, it should respond immediately through the Organization as AD treats this with the highest coastal.

• Shared key change in bulk for the customers of ACS 4.2.1

  Hello

  is it possible to change the secret key that is shared for all devices in bulk instead of return to each clients and hand over the keys in ACS 4.2.1?

  Please let me know if is it possible to execute more quickly.

  Thank you

  Hi Nitin,

  Well, if you have all the devices in a single NDG, then simply click on the NDG > downstairs, click on change the properties > enter the new secret key shared it and it will prevail there. Although if you click on any customer to AAA within this NDG, it will show the OLD shared secret key, but due to the presence of this feature, where the key of NDG always overwrites the AAA client, this will probably work for you.

  If you are not convinced by the above suggestion and I really want to change the shared secret key and then let me know.

  You use ACS SE or windows ACS. I'm assuming that you have ACS SE

  Here you need a CSV file with the code for the action of some NAS and you should be able to synchronize the CSV with RDBMS for the database to help
  version 4.2

  Code 224 - UPDATE_NAS

  VN = AAA client name

  V1 = IP address

  V2 = shared secret key

  V3 = vendor

  Import RDBMS synchronization definition
  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/user/guide/A_RDBMS.html#wp148322

  Action codes to change the Network Configuration
  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/user/guide/A_RDBMS.html#wp78096

  HTH

  Jousset

  Note the useful posts ~

• Change country/region for the payment method setting

  I'm trying to set up my Windows App Store billing payment method, but my country appears as in the United States, the problem is that I'm in the Canada.  This field does not seem to be available for editing and so I can't set up a method of payment.  How can I change this?

  Change your location to the Canada in the region in the Panel, if it is not set. There is another parameter in the PC settings, privacy that allows applications to determine your location. Turn off if your area has already been set to the Canada in the Panel. Some errors have been reported at the location determination.

  If you need help with this contact Microsoft store.
  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Site_Contact_Us

• What are the consequences of the change of password for the admin user in golden gate?

  Hello

  I just picked up during surgery and allows us to replicate door data of gold. Unfortunately, the password for the user that has been created in the database for the Golden Gate has been lost.

  At the present time, processes are added and I was trying to connect but it fails with name of user and password invalid.

  I want to change it. Do I need to apply this new password anywhere after changing?

  Thank you

  Hello

  Not a lot of consequences, if you have changed the password where you had used.

  1. you must change the password of user goldengate in parameter files where ever you had mentioned, as the extract file etc..,.

  2. If you used the password encrypted, you must re-create the encryption password.

  3. If you used a user Alias id, then you must change this too.

  Kind regards

  Veera

• Change password Admin for the Horizon

  I'm trying to change password admin for vCenter server to the horizon. I added the new account in vCenter, but everytime when I'm changing the vCenter server settings, I get the following message: due to a bad user name or password.

  I don't know I'm using the correct user name and password.

  Anyone had the same questions and know how to solve?

  Thank you in advance,

  Serge

  Try to add it like this: domain\user

• I'm doing a blank publication widget, but he keeps ignoring my changes of State for relaxation. How can I have my state changes still work for the things placed in the trigger?

  So here's what I have so far. The menu works perfectly, thanks to some Youtube tutorials. And everything is connected properly. But the only thing is that the "WORK" button does not change of State which is set up for this. I tried to apply the change of State before I placed it in the trigger area and after. Doesn't seem to do the job.

  Objective status change is essentially the 'WORK' text will turn white and white space in the run will teal'c also turn teal'c. Thus, the colors will be reversed. I have a link next to it, "ABOUT", which is currently successfully. I suppose that if it is not possible then I'll have to find another design... but I would like to know if there is a way to do it!

  

  I believe you are trying to get a color for the composition status when its assets? Please publish the site and provide the url to a glance.

  Thank you

  Sanjit

• changing mode optimizer for the given statement

  Hi master,
  
  I use oracle on windows 2003 server.actually R2 10 I want ot use CBO for my database.but when I generate explain plan for a statement he notes gives to it finish that
  
  PLAN_TABLE_OUTPUT
  -------------------------------------------------------------------------------
  
  26 - access("FE".") FEPAX "=" FNAUX. " ("' FNNUM")
  filter ("FE". "FEPAX"="FNAUX" "." " FNNUM')
  
  Note
  -----
  -used rule-based optimizer (consider the use of cbo)
  
  so, how can I know what optimizer mode is my database uses? I asked him
  SQL > show parameter optimizer_mode. SQL > show parameter optimizer_mode.
  
  VALUE OF TYPE NAME
  ------------------------------------ ----------- ------------------------------
  the string ALL_ROWS optimizer_mode
  
  
  the means used CBO.how are they?
  
  made oracle itself decid what optimizer mode should it use?
  
  can I use or mode other than the default, optimizer?
  
  Thanks and greetings
  VD
  
  It gives

  Vikrant,
  It may be possible that the query for which you've seen the plan, RBO suspicion is provided. That's why the query is recovering RBO and is visible in the foreground of the explain command.
  In order to change the mode for a query, you can very well use the hint in the query,
  http://download.Oracle.com/docs/CD/B19306_01/server.102/b14211/hintsref.htm#PFGRF503
  For example, to use ALL_ROWS, you can just put it in the query after selection.
  To change the session, you must change the setting, OPTIMIZER_MODE for the level of the session with alter session command.
  HTH
  Aman...

• Change your MSG for the text of blackBerry Smartphones

  On my BlackBerry Bold 9650-how can I change the text message ring tone? I downloaded the tones of the internet and they are on my phone and I put all that (I think) to the text message tone entering I want but it still sounds on preloaded tone that she has been set on when I bought the new phone. Any suggestions are appreciated. Thank you!

  When you go to your profile and change one, you set the incoming SMS tone until the ringer?

• change of hostname for the E-Business Suite

  Hello
  
  Im just pass an instance from one server to another server
  
  I did the following steps
  

  1 unregister the current database server.
  Perl $ORACLE_HOME/appsutil/bin/adgentns.pl appspass = apps contextfile = $CONTEXT_FILE - removeserver

  $2 ORACLE_HOME/appsutil/ydev_ < oldhost > .xml
  Replaced all the < ancienhote > to < nouvelhote >
  Replaced all the < olddomain.com > to < newdomain.com >

  3 cd $ORACLE_HOME/appsutil/bin /

  ./adconfig.sh contextfile = $ORACLE_HOME/appsutil/PROD_ < nouvelhote > .xml
  
  While doing this adconfig it is completed with errors...
  
  my log file content is as follows,
  
  [AutoConfig error report]
  The following report lists the errors autoconfig met in each
  execution phase. Errors are grouped by directory and by phase.
  The format of the report is:
  < file name > < phase > < eventually return code >
  
  [PROFILE PHASE]
  AutoConfig could not successfully run the following scripts:
  Directory: /ydev/u02/oracle/ydevdb/9.2.0/appsutil/install/ydev_ebs
  afdbprf.sh INSTE8_PRF 1
  
  [APPLY PHASE]
  AutoConfig could not successfully run the following scripts:
  Directory: /ydev/u02/oracle/ydevdb/9.2.0/appsutil/install/ydev_ebs
  adcrobj.sh INSTE8_APPLY 1
  
  
  How do I solve this problem...?
  
  IM using ebs version 11.5.10.2
  9i database
  OS linux redhat 4.0
  
  
  Thank you
  Verhasselt

  Hi Verhasselt;

  So is there a way that oracle suggests to follow your path :) please follow clone document and take your clone of the system instead of your system

  NOTE are:
  Cloning Oracle Applications Release 11i with Clone fast http://ID 230672.1
  FAQ: Cloning Oracle Applications Release 11i http://ID 216664.1

  PS: If your linux server create newly I suggest do not forget its all pre-reuqets for the EBS can confirm can work on it

  Respect of
  HELIOS