Change of assignment of IRQS for Tecra 8100

Similar Questions

• Need driver Ethernet for Tecra 8100

  I need a driver ether c16 ether c16 for Tecra 8100

  Hello

  All the drivers that are released by Toshiba are on the European driver Toshiba-> archive page

  http://EU.computers.Toshiba-Europe.com-> support download &-> download drivers

  I m not sure what driver do you need exactly, but all Toshiba drivers are located on the driver page.

• Need driver graphics card for Tecra 8100

  I have a Tecra 8100 810-1With Win98 series.

  I format the HARD drive and installed Win2000pro but some drivers not found on CD as graphics card, sound card and Ethernet card.

  After my laptop have only the 16colors and the small window that opens.

  I upgraded W2000pro by Microsoft Update for IE7, and service pack 4.

  Other readers to another device, I founded, I installed them and they work well.
  Only for the graphics of the very hard to find map drive for S3 savage/IX w/MV.
  I find 79036agplogo_S3.zip

  I tried to install it, the installation is OK.
  But when I started PC I have an error message in French, I translate it:
  "The pilot \Systemroot\system32\drivers\s3gsavm not found the point to enter the VideoPortSetEvent on the VIDEOPRT.sys drive.

  I tried to download it, but never found the driver for the graphics card, this is the link [http://fr.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=FR]

  Perhaps the drive on which I founded are not good? Where can I find it? Can you give me the link please correct?

  Thanks for help.

  Follow the link you have posted.
  Choose the category "Archive". Here you will find all Tecra 8100 drivers for windows 98 and Windows 2000.

• Max Mem internal for Tecra 8100?

  Hello

  I recently bought 2 256 MB memory modules for my Tecra 8100. In the manual, it said that 512 is the maximum for this type.
  But when I install my laptop modules does not (screen remains black).

  What should I do to let my laptop use 512 MB mem?

  Kind regards

  Raymond

  Hi rplenter,

  It's just what you say. The Tecra 8100 can handle memory of 512 MB. What modules do you use?

  I have 2 256 MB of Toshiba (PA3051U-1NME) running Modules

  Good bye

• Replace the power supply for Tecra 8100

  Hi supports,

  I have Tecra 8100 where his original power supply is dead. I need to buy a new one, but I found that Toshiba has replaced the model of PA2444U adapter with a new model. What model adaptor which is now compatible with Tecra 8100?

  Thank you. I really need an answer because I need to work with the laptop.

  Hello

  You need universal adapter with PA2444U part number. Google around and you'll find it.

• Need a display driver (s3) for Tecra 8100

  I installed Windows XP pro on my tecra 8100 and cannot get a full screen.
  Someone knows what's the problem? Do I need a new display driver voor the S3 Savage MX, or is it something else?

  Hello

  check in the Bios if the "Fullscreen/Widescreen" setting is enabled.

  Best regards

  Ben

• KTT-SO133/256 for Tecra 8100 Kingston?

  Hello!

  I wonder if Kingston KTT-SO133/256 works in Toshiba Tecra 8100, although these modules are p133 and Tecra 8100 said sheet p100 mem should be used? As I understand things is backward compatible with mems p100. Is this correct?

  Thank you very much!

  A carpet

  Hello

  Tecra 8100 should work with modules of memory SDRAM PC100.
  These Toshiba modules are compatible:
  PC100 256 MB (PA3051U-1NME)
  PC100 128 MB (PA3005U)
  PC100 64 MB (PA3004U)

  Kingston KTT-SO133 is a DIMM 144 PIN SO? SDRAM module.
  PA3051U-1NME is also a DIMM 144 PIN SO? Memory module SDRAM.
  So I guess you can also use this bar to Kingston memory.

• How to change the display on Tecra 8100 drivers?

  I downloaded the driver for Tecra 8100 my girlfriend updates, but I can't figure out how to install them. The laptop is running Win2k sp4.

  I tried the 'normal' method of "update driver" and then selecting the new pilots, but Win2k still find the original drivers and not the new drivers.

  I also tried to unpack the new drivers in the folder that contains the original drivers and replace the files in duplicate. I zipped the original file so that Win2k couldn't see the original files. I then tried to run the Setup program, but the future restart the card was not detected. It is only when I unzipped the original files once again that the new map was suddenly, and v5 drivers have installed again!

  I really want to install drivers v7 - everyone has ideas on what goes wrong? can someone give me a step by step guide how to go V5 to v7?

  See you soon,.
  Dan.

  I forgot to mention - I tried to launch uninstaller to S3, but seems not to do anything.

  All advice appreciated!

• Tecra 8100: bios update of cd. exe does not command line

  I want to update the bios of my Tecra 8100.
  I downloaded the bios, but the pc has no floppy, I cooked up a cd bootable like this

  When I start the pc, F2, press c to boot from the CD-ROM, I get in a dos environment. I went to the drive Z, "dir" and see the bios.exe that I've burned to cd. To run it I type bios.exe and continue to be 'command unrecognized file name' when I type dir *.exe, he does not see the file either.

  Maybe I forget something here?

  + The message was edited by: removed link - bad info +.

  Hello

  Your described method does not apply to Toshiba laptops.
  Each computer laptop manufacturers supports various BIOS update procedures

  Toshiba on this page we:
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/downloadDetail.jsp?soID=356848&PF=true
  Here you can download the latest version of the BIOS for Tecra 8100

  The 4810.25 package must be unpacked everything first.
  Then you should check the files available.
  There is a readme.txt file that describes how to update BIOS using the ISO to CD.

  I hope I could help

• Tecra 8100: Which compatible burner CD or Combo (master/slave-settings)?

  I want to replace the internal Tecra 8100 DVD - ROM (SelectBay) against player
  a CD - RW or DVD-Combo-Drive. Which models are compatible with the Tecra 8100
  SelectBay?
  I heard that the drive MUST be in Master mode to be able to work
  with the Tecra 8100 (and most of this type of disc is delivered in slave
  setting the operating mode)?

  Thank you all in advance for the answers!

  Hello

  I put t know what parameters should support compatible readers, but I found several compatible devices:

  Drive drive TEAC CD-224th-B30 CD-ROM and DVD - ROM Toshiba SD-C2302

  Additional I found this site which drive CDRW Toshiba compatible for Tecra 8100
  http://www.getpartsonline.com/za2295p02.html

• Tecra 8100 - more large hard drive

  Hi, I have finally made it to the age of the computer and want to know if there is a bigger hard disk for Tecra 8100 and if yes what is it and is it personally difficult to install?

  Hello

  My opinion is that if you don t have enough experience with this stuff, it will be preferable to doing nothing on your own. I can tell you that HDD is placed behind the cover pack HARD drive at the front side of your laptop.

  What is a current capacity of the HARD drive?

• Tecra 8100 2nd Slot of RAM does not

  Hello

  I just tried to install additional RAM in my Tecra 8100 and it is not displayed in the info XP Pro system.

  The chips I tried everything work and are PC100 144 pin. I tried a combination of 2 X 64 MB, 1 X 256 MB and 1 X 128 MB, but in each case, I get only one of them showing as installed.

  Everyone knows a similar problem? Does anyone have any suggestions as to what I could do to ensure that both can be picked up?

  Any help much appreciated.

  Marc

  [Edited by: admin 7 May 05 16:28]

  Hi Marc

  In my view here may not be a problem with the RAM modules as you use the right one. For Tecra 8100, you can use max 512 MB in two locations. If there is problem with just two slot that we some malfunctions. As much as I know there is no any kind of switch function where you can enable or disable the second memory slot.

• You cannot change the color display on Tecra 8100

  I have a 8100 TECRA with Windows 2000 Professional installed. I tried to install "Streets and Trips" and it won't work without colorful. I can't change the view setting because it doesn't have this option (high resolution). Is there a driver available to fix this problem?

  Don

  I found on the Toshiba page two graphic drivers for W2k on the Tecra 8100.
  Just install the graphics driver and the option should be available

• Need of SDRAM for my Tecra 8100

  Hello everyone.

  I would like to buy a souvenir for my Toshiba Tecra 8100
  It is and must be SDRAM 256 MB PC100 144pin - may by already used but functional

  It is too difficult to buy in my country
  I can pay for it about 20 euros

  Thank you

  Already find you on sites like Ebay or Amazon?
  Several months ago I ve bought a 512 MB RAM PC100 because my old module is dead.

  I ve found some modules of second hand on eBay but I ve decided to buy a new Amazon module

  Good bye

• Looking for info on cable LCD of Tecra 8100

  Hello

  I have to buy a cable for my Toshiba Tecra 8100 LCD screen 13.3 "LCD size. I'm trying to find one on E - bay. Many people announce the cable for sale, but for 14 "Sceen. My question is: doesn't the cable LCD 13.3 "and 14" is unique and different?

  Thank you Arya

  Hello Arya

  It's the right question to the Toshiba repair center (certified partner). You will be very happy if someone here can give you the right answer. Before you wait here try to call the service partner and I hope they can help you. The addresses that you will find under http://www.csd.toshiba.com/cgi-bin/tais/su/su_gaspLocator.jsp?pf=true