Change of domain in the CTS Manager invalidate the license?

Similar Questions

• I have a lot of old software CS (from the closure of the design company). In order to sell and transfer licenses, what I have to go through the license for each transfer and open a file number for each, how complete it when I sold? Or y at - it an easier

  License transfer - several pieces of software

  Jane,

  Adobe licenses should be transferred when changing users. Transfer the license allows the owner to register the software to their name again. Both the author of the transfer of the license and the recipient must complete a transfer of license form. The serial number of the product must be registered in the Adobe profile of the transferor to transfer the license. You must qualify under license transfer policy.

  Please visit these links for more details:

  Transfer an Adobe product license

  Adobe license transfer form

  Kind regards

  Guinot

• What could change the ID of the computer used for licenses in the License Manager OR?

  the site of our client we initially implemented our software that uses the Vision Run-Time and Acquisition of Vision software.    We bought a license for the PC and it has been installed. He has headed since July.   But today the customer started getting errors requesting the license. using the License Manager, OR we see "status: activated for another computer.

  look no further, we now see a different ID 'computer' code I have original screenshots when I applied the license originally so I know that the ID of the computer was not a typing error.

  The customer says person only has swapped the PC, but is currently looking to see if any work has been done.

  Someone at - it expirenced this before?

  Quote: Your computer ID is based on the MAC address of your Ethernet card. In some cases, your computer ID is based on the disk volume serial number.

  Well, my computer has literally just sat there week and this morning it me that LabVIEW was not enabled.  I do not think that the MAC address or the disc has changed in that time.  But who knows.  Our IT is pretty bad.

• Change of domain name. Redirect the hits.

  I gave my site under a new domain name. Now I want to redirect people who already have links to my site to be redirected to the new site. I can do this with a single page that collects all what happens to the old site gives bettors the opportunity to read a line or two on the change and then calls the new homepage.   Or do I have to replace all the old pages with separate redirect pages?

  I know how to do the redirect code. It's contagious shots that go to a range of different 'former domain' pages that interest me.

  In collaboration with HTML/php.

  Old domain to new domain (.htaccess redirect) redirect

  Create a .htaccess file in your favorite text editor with the following code, it will ensure that all your directories and pages of your old domain will correctly redirect to your new domain.

  The .htaccess file should be placed in the root directory of your old site (which is the same directory where your index file)

  Options + FollowSymLinks
  RewriteEngine on
  RewriteRule (. *) http://www.newdomain.com/$ 1 [R = 301, L]

  Please REPLACE www.newdomain.com in the code above with your actual domain name.

  In addition to forwarding, you must contact every backlinking site to modify their backlink to point to your new website.

  Note * this .htaccess redirection method only works on Linux servers with the Apache Mod-Rewrite moduled active.

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  www.Alt-Web.com/
  www.Twitter.com/ALTWEB

• Suggestion of domain in the URL bar

  This new feature of the 43 version, as shown in the image, is not very useful for me, because I am more often than not visit a page on a site, instead of the domain of the site itself. Whereas before I would just have to type a letter and press ENTER, I must now hit the down arrow and click on enter. I know this isn't a lot of work, but these things annoy me. Is there a topic: config to get rid of this new behavior change?

  Hmm, interesting. The first item on the list, which for me is preselected, seems to provide information on what will happen if you press enter or click the Go button. For example, if you have the URL bar auto-complete enabled (which is the default value), a corresponding site is displayed. If you disable the feature AutoFill, you could get an indication that will search in Firefox for the characters you typed. I have attached the screenshots contrast for reference.

  I think that if you want to use an item in the list, you must always press the arrow pointing to the same number of times as before.

  If you do not want this visual cue, it can be removed by disabling a preference, but this preference may have other important aspects that would be also disabled, so be on the lookout for unexpected changes in the behavior of the bar, and let us know there are problems.

  (1) in a new tab, type or paste Subject: config in the address bar and press enter/return. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste URLB and make a pause so that the list is filtered

  (3) double-click the preference browser.urlbar.unifiedcomplete to true to false

  Who help me?

  Alternatively, you can probably use a custom style rule to hide the explanatory entry, but I have not dug into that yet.

• Can the License Manager load the computer license first, instead of the license based on users?

  We have several machines in the lab with licenses computerized on them and a number of technicians who have licenses based on users. When he signed from time to time as themselves, instead of the generic service account, a technician of the License Manager fits on the machine their user account. Not a problem until they're trying to connect to their own PC again LabVIEW and they get the trial of 14 days notice period.

  Is there a way the License Manager looking for the license to the computer first instead of the user license?

  Thanks for any help.

  Joe

  Hey Joe,

  In the license file on the license server, you may be able to manually change the tag "sort" in the file to change the order in which VLM withdraws licenses. Licenses are checked in descending (2, then 3, then 4, etc.). As a general rule, your license file is set up in a default order, but in special cases like this, it may be advantageous to change the order. To do this, follow these steps:

  1. open the license file with a text editor (such as Notepad)

  2. search for the tag "flows out". For example, the entry "VLM_Core" will sort tag value will appear as "sort = first". Do not change this value. VLM_Core must always be the first.

  3. change the value of sorting tag for the license to the computer named to a value less than the value of sorting tag for the named user license. (for example 'sort = 2"for named computer and 'sort = 3" to the named user).

  4 save the file and reinstall the license.

  Let me know if you have any questions!

• Microsoft please let us change our age on the xbox live account

  Microsoft please let us change our age on the xbox live, my account is on TEENAGER so I can't make friends. I don't want to do another gamer label because its goes a bunch of months to get my peaple achievements already want to be my friend but I also can't acept friend reqests.

  Jaime

  You may be able to transfer your gamertag to another ID Windows Live ID. If you are on a child's account, then you will need to contact the person who made the parent account to adjust your settings. See the link below on how to transfer your gamertag. If it does not my only suggestion would be to create a new Windows Live ID.

  http://support.Xbox.com/en-us/billing-and-subscriptions/account-management/manage-Live-ID

• Questions on change of CPU and the invalidation of permits

  * Original title: Hobby Builder Question

  I built my own systems since 1996, and in general, I would like to do two things... buy a copy of the sales at retail (for portability) and run it through up to 3 systems before you buy a new.  Usually my builds contain only a few new parts, that I update a couple of times a year.  I never had problems with Win 3.1, 95, 98, ME, XP or Vista.  In fact, I always have an original game of 3.5 "diskettes for Win 95 and CDs for 98 and XP.  in 2009, I bought a laptop that came with Win 7 Home Premium.  (A Toshiba Satellite A215).  I had to replace the HARD drive in this laptop and he had done professionally in a store (I was not familiar enough with laptop Desk computer architecture vs, so he had to) and technology has made a minor repair job and installed a HARD drive new, unformatted.  He then installed his own (OEM/System Builder multi-license) copy of Win 7 Pro and only charged me for installation costs ($49).  He was and still is active.  On my desk.  I built 1 system in the last years of 7 (built in 2014) I used a copy of the OEM System Builder from Win 7 HP x 64 SP1.  Time for a new building... from scratch.  I bought a single copy of the version of OEM Windows 7 Pro x 64 key to a sale to the retail/wholesaler. This will cause me any questions?  (I intend to upgrade to win before July 10 deadline, but I want to get all moved from the old system to the new system first) Once I have all my important files transferred, I'm decommissioned from the old system to use parts of upgrade of the wife (she has an old system of 11 years with Vista still on it) as long as the Build for his own use my old motherboard, can I transfer my license on his machine? This would include a change in CPU? (He currently has an AMD Athlon X 4 860 K, but I'm going at it in an APU A10-7850 matched with a suitable for Dual Graphics GPU)  All this work will invalidate the license.  The SSD containing my OS will be part of its upgrade of the system, as well as the motherboard.

  I'm extremely tech savvy, but am not a PC manufacturer or an authorized, I just take advantage of construction machinery.

  Sorry so long a post.  Want just as much information shared for a good answer.

  Thank you

  Once installed and activated, OEM of Windows licenses do not have transfer rights.

  The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:

  -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

  -OEM Licenses are tied to the computer first you install and activate it on

  -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

  -OEM versions does not move directly from an older Windows operating system

  When I install a preinstalled (OEM) or the retail version of Windows 7 or Windows 8/8.1 Windows 10 license, this license OEM to remain or become a retail license?

  If you upgrade an OEM or retail version of Windows 7 or Windows 8/8.1 for the free Windows 10 update this summer, the license is consumed in it. Because the free update is derived from the basic qualification license, Windows 10 will be that too many licenses.

  If you are upgrading a retail version, it carries the rights to a commercial version.

  If you upgrade an OEM version, it carries the rights of an OEM version.

  Full version (retail):

  -Includes the rights of transfer to another computer.

  -Does not require a qualifying earlier version of Windows.

  -Expensive

  Upgrade version (detail):

  -Includes the rights of transfer to another computer.

  -require a qualifying earlier version of Windows.

  -Expensive, but less expensive full version

  OEM:

  OEM of Windows versions are identical to the versions commercial full license with the following exception:

  -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

  -OEM Licenses are tied to the computer first you install and activate it on

  -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

  -OEM versions does not move directly from an older Windows operating system

  What happens if I change my motherboard?

  In regards to the OEM license , this would negate the 10 Windows upgrade license because he is no longer a qualifying previous base license that is required for the free update. Then, you will need to purchase a Windows 10 full retail license. If the license of basic (Windows 7 or Windows 8.1) qualification was a full retail version, then Yes, you can transfer it.

  Since the final Windows 10 user license agreement:

  b. autonomous software. If you acquired the software as a standalone software (and also if you upgraded the software you have purchased as a standalone software), you may transfer the software to a different device that belongs to you. You can also transfer the software on a device that belonged to someone else if (i) you are the first user under the software license and (ii) the user agrees to the terms of this agreement. You can use the backup copy that we do or the media the software provided on transfer the software. Whenever you transfer the software to a new device, you must remove the software from the previous device. You can not transfer the software to share licenses between devices.

• Change of domain alias name

  so...  What is the point of alias of the device again?

  After you have created a few areas, I noticed in my VNX is not enumerate ports in the way I thought it would be.   Port 0 of the slot 2 SPA shows like "A-4", while I made an alias domain called "A2P0" then, I added "A4" at the end of the device alias (after activation of this feature in the settings of the web server).

  Well, he cautioned against a disruption of the VSAN, I didn't know that it's a big deal, as I have never done that one switch, but it turns out that everything in this switch is remained connected on the fabric, and I found that I had to reconfigure the zones to use the new device alias.  I thought that the whole point of device alias increased they can spread the everywhere and it would automatically update. They were not yet updated in areas.
  In my 5100 s Brocade, I could change fc alias throughout the day (if I were so inclined), it has never beaten the areas, just automatically updated with the new alias.  But they are not?

  based zoning pWWN is good practices by all providers of storage!

  What you see is the standard; changing the name of a device alias implies to change the zoning.

  Only if you change the attribute of a given device alias, for example changing pwwn, automatically update areas!

• CTMS 1.8, CTS Manager 1.8, CUCM 8.6.2

  Hi all

  We have a few problems with CTM, the MLC, the CUCM

  (1) we added the CUCM editor successfully in CTM. What of the CUCM Subscriber. Wear it and the pass, what is supposed to be the same as we have used for editor of the user of the application we created for the CTS Manager.What on the certificate. Use the Publisher's certificate or the certificate of the Subscriber to add the Subscriber CUCM in Manager of CTS

  (2) we tried to sign up CTMS with CTS Manager without success

  We use in the Community trade marks in the field Manager CTS: user = username admin for the CTS Manager, pass = password admin for CTS Manager.Actually, we used the credentials to administrator for the CTS Manager.

  Are these information identification of the good or something else?

  Concerning

  Chrysostom

  Chrysostom,

  The Community trade mark is designed to talk to a single CUCM by cluster and supports up to 5 clusters. The cluters can be a mixture of secure and non-secure but must use SIP trunks like cluster trunks. When the CTMS in the MLC and vice versa construction use the same username and password on both sides if not then the CTMS walls can't join the Community trade mark.

  V/R,

  JD King

• Abrupt change of brightness of the screen

  Hello, my laptop is Compaq CQ58, Intel 2x1.8, 4 GB of RAM + 3.5 GB allowed through Control Panel...

  Windows 8.
  Now 2.3 times while I was reading a book, c#, abrupt change of brightness of the screen that's happened.
  Usually I keep the low brightness, by 3 ups above the lowest brightness level.
  .. so the problem is a few seconds it rose almost of highest level of brightness, without doing me anything... just like that and then come back to how I used to set.
  PS: I recently installed a game that the processor runs all the time on 98%, all playing me, could he be burning CPU... This is the reason for this sudden change in brightness, is my laptop dying lol, Please help!
  Thank you!

  Hi Kaloyan,

  This could happen because of the active adapter brightness or the obsolete drivers display

  I suggest to update the display via the Device Manager drivers and check.

  -Press X and Windows , and then select Device Manager.

  -Browse graphics cards, do a right-click on the driver and click on Update driver software.

  -Restart the computer and check if the problem persists.

  If the problem persists, then disable the brightness map settings in the Power Options and check.

  -Press the Windows key and D to get to the desktop and then click on the power management on the system tray icon, then choose the more power Options.

  -Click on the link change plan settings on the selected plan and then click on the link change advanced power settings .

  -Browse down to display, enable adaptive brightnessand change the settings of one off.

  Check if the problem persists after trying these steps.

  If you have any questions, please let us know.

• Change my subscription of the individual team

  Hello

  I am currently on a team subscription (ends today, June 8) at dealerships here in Greece.

  Since then, I work on my own last years I see no reason to pay more for a subscription of the team and I wondered if paying as an individual would work for me.

  I asked my dealer if I could make this change with him and he replied that it is not allowed, and the only way to do it is online, directly from adobe.

  He added that he is not sure if I can get an invoice for the transaction of each month.

  The above is necessary to justify the cost of the subscription charges to the Greek authorities.

  A few days ago, I had a discussion with a member of the Adobe staff and was told that, in order to change, I need to cancel my subscription running and then make a new. There may be no renewal of the individual team.

  Could someone enlighten me concerning all the above?

  In particular,.

  -can I get an individual subscription to creative cloud for professional use, which means I can justify the expense?

  -can I cancel the subscription existing team and start using an individual immediately, which means not to lose an hour?

  Thanks in advance

  Future prospects for a useful answer

  Hi apostolos-artwise,.

  Adobe staff provide you with the correct information on cancellation of your team plan and the subscription, and then individually.

  Please see manage your membership FAQ: How can I change to a different plan of the creative cloud?

  In addition, once you subscribe to the membership and plan by Creative Cloud price plans | Adobe Creative Cloud we will send you the invoice depending on your plan. Please pass by manage your membership FAQ: how to print an invoice or a receipt of payment

  You can use the individual plan for your business goal, as long as you can follow the Licenses and terms of use | Adobe

  The change of regime you don't reinstall applications. All you need is just log out of the application of Office CC and then connect you to refresh the membership and you will be good to use the applications.

  I hope that helps!

  Kind regards

  Sheena

• How to keep summers jsf pages correctly updated to account for changes to data in the database?

  This is a case of common use for web applications:

  User open A (i.e. a jsf page) of a web application, keep open for a period of time and do some browsing or editing on this page.

  During this time, someone others or modified events of the data in the database, then:

  Scenario A:

  1. the user should be able to see the evolution of the data in the above open jsf page when page navigate to other records.

  or when the page is refreshed by refreshing the web browser (reload the page) or by pressing a button on the page manually.

  Scenario b:

  2. the page should be able to be updated automatically to reflect the new changed data in the backend database.

  -This means that the user has no need to run the refresh action intentionly/manually to get the new data.

  Here's a possible implementation are provided in subsection 12.1 JDEV/ADF for above use cases:

  1.kdario: tips to know how to refresh your data

  Re: Field Image cannot refresh when you move between records in a jsf page

  In my opinion, the solution of kdario is a little bit complicated, is there an easy approach?

  and kdario says:

  'normal way' for update page is generally very bad for applications based on JSF/ADF.

  Is there more evidence or reference documents to support above sayings?

  2 to implement scenario B, which is recommended methods?

  Is the Active Data one approach good?

  If there are active - as tech batteries was adopted for web applications on the internet (which will have more agreement than in the intranet user), would there be possible serious performance problems?

  Thanks in advance.

  In fact, I suggested to the position 3 solutions (and option c) Notifications of changes to database is the most complicated).

  Also, here is solution d) in pageDef, select iterator and ownership of Cache set to false results

  'normal way' for update page is generally very bad for applications based on JSF/ADF.

  Is there more evidence or reference documents to support above sayings?

  Well, when you use the "back/refresh" browser button, this will retrieve the Forms page cache and skip the controller of the ADF.

  You can use google to do this, for example:

  https://groups.Google.com/Forum/#! subject/adf-methodology/CKoDdhLdrYE

  ADF developers world: how to avoid the mistake Houston-35007?

  Andrejus Baranovskis Blog: How to manage the Web browser buttons in the ADF/WebCenter Applications

  Dario

• How can I change the license to another host?

  Hello

  I am replacing a host, but cannot change the license to the new host.

  The ability to change the license on the vCenter (administration, licenses, manage vsphere licenses) appears dimmed (unavailable).

  All the licenses that I own are associated with former guests. I can't add new hosts because all licenses associated with the former hosts. I removed the host the vCenter, but the license is always affected.

  How can I change the license of a former host (which no longer use) by the new host?

  Thank you!

  As mentioned earlier, it should actually take a few minutes, so with the two days, you've already waited, there seems to be something wrong. Please take a look at KB VMware: vCenter Server 6.0 incorrectly states the amount of licenses in use by the ESXi host to see if this helps you to identify/solve the problem. In the case where you don't consider opening a case of pension with VMware.

  André

• Changes in color of the screen when I launch the bridge, as if change ICC profile

  I use the native lcd profile on my macbook Pro 17 "under Yosemite 10.10.5.

  For the moment, I launch Bridge (CS5) my screen changes as if I would change to a profile as "adobe RGB (1998)" (blue gray)

  While the bridge is open, it remains the same at all levels, wathever if I'm in the finder or another application, when I leave it turns its back to normal.

  If I try to edit profile in the meantime Bridge is open simply rotate yet more blue if I select another profile as "adobe RGB (1998).

  He returned to normal when quiting greys Bridge. I run it with the hold option key and clean all cache and prefs, but it does not help

  I did fix the permission and clean most of the system and other caches, not useful either.

  This does not happen with photoshop CS5 or other adobe applications.

  He has even changed during an attempt of "extensions Manager" and select bridge to install (not to open deck), when clicking back on photoshop b.e.the screen made it back to normal.

  Where is the bug?

  Thank you ~ Mohit,

  but this isn't because of the calibration. He gets as a 'blue layer' above everything and can not get corrected by calibration.

  I found the solution on apple discussions:

  https://discussions.Apple.com/message/21532737#21532737

  It was in fact not an Adobe apps problem, even though to me it seems so it's a matter of dedicated auto-commutateur video card problem (or something like that) and the solution

  is: cleaning the cache of ColorSync, I have done as recommended with Onyx app and has worked well for me.

  It seems also come back after a correction of permission, but then just re--clean the cache color Sync.