Update of signature IDS - MC

Similar Questions

• Machines virtual 1.1 how update you the Signatures IDS MC?

  Help!

  Got CW VMS 1.1 and a couple of 4250 IDS boxes, they perform signatures to 3.1.3 (s42), when I try to add them to the MC in SMV (so I can then update sigs) he advises that GIS version is unknown and that I should update the signatures of MC.

  I downloaded IDSk9-GIS - 3.1 - 3 - S49 and placed in the directory of the ID updates within MC, I chose this file to update the MC, but it does not appear to do.

  Once the file is selected and I get th text box informing them that it will be applied, I select continue and he returned to the page "select the file.

  Check the audit log it shows the update is started and finished in the same second period and I still can't import/add the ID of the probes.

  Pointers would be most appreciated.

  Ian,

  I know this sounds illogical, but you must download and apply the update to 3.1.3 (s42) .zip to your Inbox to IDS MC. Problems with updates of the IDS MC, it's that there is no way for the MC to say what GIS have been added as part of S42, S45, S49, etc... Thus, avoid us confusion in the minds of the MC by not letting you add a sensor that has a version of GIS that is unknown to the MC. Once you apply update S43 to MC, add sensors. Then, go back and re-apply the update S49 and you should be the option Update sensors as well this time. Good luck and I hope this helps.

  Scott

• installation of update of signature for JOINT-2 AIP - SSM

  Hi every one, im not sure about this issue but I think its beter ask you experts.i want to know that if I update the signature for example for my JOINT-2 can I install this update of GIS on my AIP - SSM--> assume that software IPS on both devices are same and I also installed the license key valid on AIP - SSM.now can I do this or not? and I know that if you do not license installed on JOINT-2 you cannot install any point of GIS on JOINT-2 but this topic AIP - SSM? I want to say I can install updated GIS on AIP - SSM without installed the license key valid on AIP - SSM? Thank you

  There are 3 main types of Signature updates.

  (1) IPS sensor Signature Update

  (2) updates of Signature CSM for IPS sensors

  (3) signing IOS IPS updates

  The IPS Signature Update file name is in the form: IPS-GIS-Sxxx-req - Ey.pkg

  That's probably what you are referrnig to in your message. This file can be installed on ANY device IDS/IPS or Module.

  Here, the requirement is not the platform but rather the level of the engine. The part "req - Ey" in the file name indicates that the sensor has already run the 'y' the software engine level.

  If a file IPS-GIS-S436-req - E3.pkg can be installed on any IDS/IPS device or Module as long as the software on this sensor is a version of the 'E3 '.

  The CSM updates are updates of signature for the Cisco Security Manager. They contain special files that SCM uses to update, and then also included in the JLC update is the update of real sensor described above. CSM unpackages the CSM update, updates and then uses this file embedded to upgrade the actual sensor.

  The third type of file is for routers IOS loaded with the special IOS software that has the distinction of IOS IPS where the router itself (instead of a separate module of the IDS/IPS) keeps track of the signature.

  These updates to the signing IOS IPS settle on the real router and are not installed on the Modules or the sensor IDS/IPS devices.

  So to answer your question, yes the same Signature Update for your JOINT-2 is the exact same Signature Update for your SSM modules.

  The same exact file is available through several different paths on cisco.com. But no matter which way cisco.com you have downloaded the file, you can always install it on all the Modules and the IDS/IPS Appliances.

  With respect to licensing, the license works the same on all Modules and the IDS/IPS Appliances. A license must be on the sensor for the Signature Update to apply.

  NOTE: A trial license is available at cisco.com for new sensors to allow you to get everything set up properly for your sensor to be covered by a service contract and get the standard license for the service contract.

• How to update a signature

  Hi all

  I'm new to ips ASA-SSM-10

  First time connected to an ips module.

  Can someone give idea how to update the signatures.

  REDA

  Without a license, you have fully functioning IPS sensor but his programm antivirus running similar without updates - without the latest signatures - it protects you from many attacks (using the generation of signatures, heuristic analyzies, Protocol knowledge), but it doesn't protect you from the last attactks...

  M.

• Get a Smartnet contract also gives you updated signature IDS/IPS?

  One of my clients is looking into getting an ASA5510 with module AIP - SSM. I realize that with IDS/IPS systems, it is * essential * to keep files up-to-date signatures. Buying me the Smartnet contract for the bundle gives updates signature files, or is there another package that I need to buy?

  I see references to the "Cisco Services for IPS", but this seems to be mainly for routers/IOS firewall/IDS packages.

  There is not a Smartnet contract for the ASA/AIP-SSM bundle.

  The only contract SmartNET SSM packages with the CSC - SSM and not the AIP - SSM.

  When buying a bundle ASA/AIP-SSM, you'll need to buy a package maintenance contract. Package maintenance contracts are Cisco Service for the IPS markets and include the support of signature for the AIP - SSM and the software and hardware in support of ASA and AIP - SSM (software and hardware support, is what it is normally part of SmartNET).

  Packages you will need to purchase a maintenance contract Service Cisco IPS using one of the formats following part numbers:

  CON-SUw-ASxAyKz

  The 'w' will be 1,2,3 or 4 depending on the level of service.

  The 'x' will be either 1 for the 5510, 2 for the 5520 or 4 for the 5540.

  'Y' will be 10 for the AIP-SSM-10 or 20 for the AIP-SSM-20.

  The z will be 8 or 9 depending on the level of encryption.

  Thus, for example:

  CON-SU2-AS2A20K9 - would be 8 X 5 X 4 support for the ASA 5520 bundled with the AIP-SSM-20 with the top encryption.

  NOTE: There is also SP contracts for purchase by service providers who follow a slightly different format.

  There are a few users who have purchased the ASA and the AIP - SSM separately.

  When purcahsed separately you would need to purchase a contract SmartNET for the ASA and a separate Department of Cisco for IPS for the AIP - SSM maintenance contract.

  Maintenane AIP - SSM contract will be in the following format:

  CON-SUw-ASIPyK9

  The 'w' will be 1,2,3 or 4 depending on the level of service.

  'Y' will be 10 for the AIP-SSM-10 or 20 for the AIP-SSM-20.

  Thus, for example:

  CON-SU2-ASIP20K9 would be 8 X 5 X 4 support for the AIP-SSM-20.

  What you find is that buying a separate SmartNET for the ASA and Service Cisco IPS for the AIP - SSM will be more expensive than buying a single Cisco IPS's Service to the ASA/AIP-SSM bundle. This is because there is a discount when buying by the beam.

• How to update the Signature of IPS

  Can someone help me with the steps in the upgrade of the signature of the IPS for ASA SSM - 20, IDS 4215 platform, WV-SVC-JOINT-2 via IDM and EMI. All sensors are already upgraded with signature S480 with engine E4.

  Can I upgrade the signature directly from S480 S507? Please let me know the file I need to download. Is there an impact by updating the signture as reboot?

  The steps to upgrade signatures via IDM/IME are listed in this document:

  https://supportforums.Cisco.com/docs/doc-12212

  Yes, you can upgrade to S507 S480

  Links to the correct files are also in the above document.  The IPS should not restart the upgrade.

  Good luck!

• cloned drive error message Microsoft Antimalware has encountered an error updating of signatures

  I had this 2nd hand computer, I do not have the recovery disk.

  I added a hard drive, cloning of the o/s old to it but windows do not recognize some of the programs.

  I used SEAGATE DISC WIZARD for CLONING

  I continue to have registry errors as follows:

  1 :) Microsoft Antimalware has encountered an error trying to update signatures. New Signature Version: Previous Version of Signature: 1.111.1933.0 updated Source: Microsoft Update Server Update step: Source path of research: http://www.microsoft.com S ignature Type: Type of update AntiVirus: full user: NT AUTHORITY\SYSTEM current engine Version: previous engine Version: 1.1.7604.0 error code: 0x8024402c error description: an unexpected problem occurred when checking for updates. For more information on installing and troubleshooting updates, see

  2 :) the application cannot be initialized. Background: Details of Windows applications: the registry value cannot be read because the configuration is invalid. Recreate the content index configuration by removing the content index. (0x80040d03).

  3 :) Cannot load the Search.OneIndexHandler.2 protocol handler. Description of error: class not registered.

  Here are some on the ERROR log.

  answer to your q. the old /d hard has worked just by sepace

  Help, please!

  Actually worked of CCleaner I used it but sometimes it causes more problems then it solves. Especially with the product "windows" because they need the registry to work settings.

  OK just make the thread replied on your own poster if you figured it out.

• Cisco ips automatically updated link signature?

  Hi all
  I would like to know what address or the link that we need to the IPS-4240 signature automatically update from cisco.
  In our Setup IPS show this link. is this correct?
  username sabirins1978
  Cisco-url https://198.133.219.25//cgi-bin/front.x/ida/locator/locator.pl
  Thank you.
  Kind regards
  Budy

  Yes like the following should work

  https://www.Cisco.com/cgi-bin/front.x/IDA/Locator/Locator.pl

  Concerning

  Farrukh

• Update IPS signatures via USB port

  Hello

  It is possible to update signatures IPS to the IPS of the IOS on 2900 router uses the USB port?

  We tried to use the USB port and it seems to work using the command:

  copy usbflash0:IOS - S552 - CLI.pkg idconf

  The signatures have been stored on the USB drive

• update of the IDS-K9-sp-4.1-4-s91.rpm.pkg period

  I downloaded IDS-K9-sp-4.1-4-s91.rpm.pkg and IDS-K9-sp-4.1-4-s91.zip to perform the upgrade. I'm currently under version 1.0000 S47 on 4235 NetRnager sensors.

  I applied the s91.zip file to the IDS MC version 1.2.3. It went well with no problem. The problem is all the attempts to transfer ftp of the s91.rpm.pkg by loogging to the individualsensors with the account admin CLI and issue the terminal 'configure' and upgraded ftp://user@IPadd//directory/ISD...rpm.pkg"returns with a message out"time ".

  1. is there another way to do the upgrade?

  2 when I did the upgrade from MC ID using the .zip file, I noticed that it automatically falls my DSI sensors and you are invited to select those ZI want to update. I checked all sensors and clicked on upgrade. Well, the next time I opened to the high DSI MC and selected each of the sensors (Configuration/settings/Identification), I noticed that in fact one of the sensors had now GIS version 4.1 (4) S91 so that previously 4,0000 S47.

  The problem is that all others retain version 4.1 (1) S47 who was that they all had until I applied the file s91.zip on the IDS MC.

  3. I clicked now 'motion sensor' again to (Configuration /settings / identification) and then I got the error message "version of motion sensor has failed. Please check the Audit log for more details. »

  4. I checked my diary's and saw this message (among others)...

  10.31.210.219: importer version the probe sensor error - can not get the type of sensor. Unavailable remote process exit code

  Now, this isn't the first time I get this type of error. What is the solution to this problem.

  5 has anyone who uses SCO and how is it that is used before.

  6. can I log on to the device (via SSH) and run a command so that I can open the dirctory (var / etc) and then empty the. RPM.pkg file?

  7. any help would be appreciated

  Thank you

  When you log on to the service account, you use a unix bash shell (not the CIDS cli). Also, if you have an ssh server running on you high tower of the page (from your description, I think you do) then you have what you need to perform the upgrade of the scp. I will show two options:

  Option 1)

  (update directly from cell phone)

  -you will need to know the path to your file of package on your top of the Tower, in this example lets assume that you have a user defined as "sshU" ssh and the IDS*.pkg file is located in the directory sshU. Suppose also that your IP of your laptop is 10.1.2.3

  -connect the sensor with the admin account (you will use CIDS cli)

  -conf t

  -ssh host 10.1.2.3

  -Yes

  -scp on the rise:[email protected]/ * *//IDS-K9-sp-4.1-4-s91.rpm.pkg

  Option 2 (only if option 1 failed)

  -Connect with sensor as a service (you will use unix bash shell)

  cd/tmp

  -ftp 10.1.2.3

  -User:

  -Password:

  -cd

  -get an IDS-K9-sp-4.1-4-s91.rpm.pkg

  -quit smoking

  -output

  -connect the sensor with the admin account (guess sensor IP is 10.1.2.99 and service account name is 'service')

  -conf t

  -upgrade of the scp:[email protected]/ * *///tmp/IDS-K9-sp-4.1-4-s91.rpm.pkg

• Security alerts on attacks of Signature IDS

  I received alerts of attacks IDS on my controllers such as reported by my WCS wireless. How can I stop these attacks?

  Really nothing more. Follow best practices and secure your wireless as best you can. If that creates the ACL in your infrastructure, then what you have to do. What we need to ask is how secure is your LAN. Can someone plug into a port in the lobby a get on your network? There are several ways to hack a network, simply attach as much as you can.

• Installation of IDS OS on hard disc

  I have an IDS 4230 FE and downloaded the software following cisco IDS-42XX-K9-r-1.2-a-4.1-1-S47.tar.pkg, but I am unable to install this on my IDS sensor. Does anyone know how?

  This package will not install on a blank hard drive. It can be used only to convert existing recovery partition a race application partition.

  You will need a recovery CD and will have to start from the CD.

  To get a CD you would need an active Service Cisco for IPS contract of maintenance on the sensor, and then you can order the CD from recovery of $0.

  Understand that the IDS-4230 is not supported with version 5.0 and higher versions of IPS. It is supported only in respect of the IDS 4.1. And is no longer supported for new updates of Signature IDS 4.1.

  I'm not sure it's worth spending your time to get a picture of version 4.1 ID running on your sensor IDS-4230.

  Just make sure it is an IDS-4230 and not an IDS-4235. The IDS-4235 is a more recent and updated signing day always cared for and received.

  You would still, however, need a Cisco Service to date for the maintenance contract of IPS for the sensor to obtain the latest updates for the sensor.

• 2.2 IDS MC and IDSM2 VMS

  Hello world

  anyone of you knows the meaning of this message:

  "Failed to update sensor for . The current version 4,0000 S106 do not match the 4,0000 S113 applied version after update. »

  Application source: shared service process subsystem: Common Services of the Java System

  I'm trying to update my signature IDS MC IDSM2, but it comes to the results generated by the report of the audit log.

  Kind regards

  Paolo

  Have you applied the signatures of the CLI before using the IDs MC? If so, you will have to perhaps update via the CLI for S113, remove the probe from the MC and then add it again. This will get the update of the signature in sync.

• Signature ID updates

  When I update my sensors IDS using the IDS MC 3 of my 4 probes hang. They don't ever restart all services. When I telnet to them I get the message "error: cannot communicate with system processes.» Please contact your administrative system

  nistrator. ». The IDS MC progress veiwer shows 100% but with errors. His mistakes are: sensor Int_IDS1: Signature Update process

  An error has occurred during execution of the script of update on the sensor that is named Int_IDS1. Detail = RDEP a communication error occurred during the update. Exception message = org.apache.commons.httpclient.HttpRecoverableException: error in the analysis of the status of the response line: could not find the line beginning with "HTTP".

  A sensor works very well without any problems.

  I tried upgrading the sensors individually through IDSMC and 3 even fail with the error message. I tried to make it through the command line and ftp and even failure 3. The 3 sensors that fail are 4235, and the successful sersor is a 4250 XL.

  If you are not running the patch 'f' on your sensors, 4.1.4(f), you must download and install this hotfix. It corrects insufficient memory on the upgrade issues that are very likely the cause of your problem.

  The location of the hotfix is released in another thread.

• RE: update IDS4210 to Signature S289

  Hello

  With respect to improving the network of the device IDS above, just read through the "Cisco IPS Active update Bulletin: 05/06/2007" which was sent to me he States:

  "The update of the signature S289 DO can apply to 5,0000 E1 version or later sensors as follows:

  "This update of the signature is taken in charge on the IDS 4210, IDS-4215, IDS-4235, IPS-4240, 4250-IDS, IPS-4255 and sensor devices IPS-4260 series.

  But to read the Readme file on the site it says:

  "The upgrade of IPS-GIS-S289-req file - E1.pkg can be applied to.

  the following sensor platforms:

  -Sensors, IPS-42xx Cisco Intrusion Prevention System (IPS)

  "- Intrusion (IDS) of Cisco IDS-42xx detection system sensors (except the IDS-4210, 4220-ID and ID-4230).

  What is the good?

  A little confused.

  Kind regards

  Mark

  It is a grey area.

  The IDS 4210 found end of sale December 6, 2003:

  http://www.Cisco.com/en/us/products/HW/vpndevc/PS4077/prod_eol_notice09186a008032d508.html

  By the strategy of Cisco, it will support updates the signature on a near-end sensor sales for at least 3 years from the end of sale. So update of Signature support was guaranteed by the policy only up to the last 3 dec 3006.

  http://www.Cisco.com/en/us/products/HW/vpndevc/PS4077/prod_bulletin0900aecd80358daa.html

  However, nothing has been done to intentionally prevent signature extract newer than Dec 2006 to be installed on an IDS 4210.

  I'm not aware of any project at this stage to intentionally prevent installation of updates of peg on a 4210 IDS.

  In addition, understand that politics is a minimum of 3 years, but I don't know how much longer, 3 years he would be officially supported.

  5.1 IPS software will continue to receive updates of signature for a period of 18 months, and it is possible that these GIS 5.1 updates will continue to be installable on a 4210 IDS.

  This confusion is probably why the 2 documents are not synchronized.

  In addition the signature update readme E1 was written for updates of 6.0 and IDS-4210 is not supported in 6.0. 5.1 versions did not pass to E1 only later. When the readme file has been updated to cover the two 5.1 and 6.0, it is possible that the change of platform support list (to add IDS-4210) was just gone unnoticed. So, I'm not sure if she was intentionally set no support for IDS-4210 or if it was a mistake of editing.

  Personally, I would recommend go ahead and install it (except off your config before moving just in case).

  If it installs OK (no bugs don't pop up during installation), then you should be fine works on your ID-4210.

  But if problems arise in the installation of an update future signature, then you click on this grey area. And I don't know what the answer would be if that were to happen.

  I'll send an email to our in-house team and see what the word "official" is on ID-4210 sig update support.

  However, I recommend that you go ahead and see about upgrading to a new model of sensor.