Change of specialties JRE for an existing project

Similar Questions

• How to change the PCTFREE parameter for an existing table

  How to change the PCTFREE parameter for an existing table?
  
  Guys can you help me please

  Hello

  Of course it is possible.
  In this case you would export the table from the database (using old style exp)
  Start the import with the index_file option to generate the table/index instructions
  Modify the file created and updated the PCTFREE and remove any that need to be performed (default, if I remember correctly, he comments on the statements of the Index)
  Run the file for the table and the index created
  After that start the import with the option "ignore = yes".

  Make sure that you export only this particular table using "tables =
  Also in importing the "ignore = yes" will also be important data that still exists.

  In my view, however, this is not what you want to do. It's more complex, sensitive failure and the table should be deleted, so users are affected unnecessarily long.

  Success!
  FJFranken

• I have a problem with corruption.  How can I change the timeline on an existing project.  Each image is moved about 2.5 min.;  My preferences are for 180 frames.  It does not seem to consider one after the fact.  Is it possible to copy the entire thing on

  I am new to use the forums.  How to start a discussion?  The ICO next which is grayed out.

  I have a problem with corruption.  How can I change the timeline on an existing project.  Each image is moved about 2.5 min.;  My preferences are for 180 frames.  It does not seem to consider one after the fact.  Is it possible to copy the whole thing and put it in a new, m not corrupted project?

  Hello and welcome.

  I feel for you after reading your story, however, it that are supposed to do? It is a forum for Dreamweaver and to my knowledge, Dreamweaver has no functionality called the chronology.

  Could you please explain the problem so that we can understand?

• How can I change the size of an existing project?

  I have several Captivate projects for which the screensize must be changed (they are too big and must be settled on a smaller screen size).

  Captivate projects are scalable? If so, how do you?

  And if not, does record all screencaptures again?

  You can change the screen size of existing project via change it > option resize the project.  But if the screenshots are in-game, you can find that it means, they are distorted or cut off.  Then you can be better informed to redo everything simply.

• Is it possible to change sequence settings after you start a project? Also, how can I know what sequence of parameters are best for clips that I have?

  Is it possible to change sequence settings after you start a project? Also, how can I know what sequence of parameters are best for clips that I have?
  The clips I have are HD and .mp3. MTS files.

  In the latest version of Premiere Pro, it is possible to change the settings for the sequence.

  You know what settings are best knowing what you are doing.  (Personally I'm fan of formal education for this.)  I know that sounds sarcastic, but, there is no right answer to the question whose parameters are the best.  There are many variables here, then... you really need to know what you're doing.

• How and in which files that I can combine my computer policy in the html for my captivate project file? I know that I need to make changes on the css, HTML, and I need to add fonts to a folder, but do not know where please help

  How and in which files that I can combine my computer policy in the html for my captivate project file? I know that I need to make changes on the css, HTML, and I need to add fonts to a folder, but do not know where please help

  https://forums.Adobe.com/servlet/JiveServlet/showImage/2-7496573-757050/pastedImage_0.PNG

  This is an image of the files I see

  If the police will not be on the end user's computer, it won't make a difference.

  You should try to include a web font, but you cannot use those during the creation of course, so when you publish or correct fonts you have alignment issues.

• Change the codec for a multicam project

  Hi all

  I have a situation with which I hope you all can help.  I have AVC-INTRA 100 720 p 60 sequences of three cameras recorded on P2 cards that I placed by mistake on a sequence of 720 p 60 DVCPROHD.  I then nested this sequence inside another sequence of 720 p 60 DVCPROHD I can modify multicam all cameras.  After completing the project, I had this time "duh" when I realized it was actually AVC-INTRA 100 feet and not the DVCPROHD footage.  Now I'm wondering how to change the two sequences for the correct codec.

  So I know that I can simply create a new sequence of AVC-INTRA 100, copy the entire contents of sequence 2 (my multicam activated sequence with all editions) and paste it into the new sequence of AVC-INTRA 100.  The question I have, is that it contains a sequence of nested for multicam editing, and the nest is pointing to the original sequence with the images from three cameras isn't always properly in a sequence DVCPROHD.  So, I'm wondering how to get the change codec in AVC - INTRA 100 for the sequence with the images from three cameras, can tell the nested sequence to now point to the correct location?

  God, I hope I explained that clearly.  As always, thanks in advance for the help.

  Mike Tomei

  Well, do you feel lucky, punk? Make a backup of your project before you file try this... and I make no guarantee that it works, although in my test, it has done.

  Open your database project in a text editor; I like Notepad ++. Premiere Pro project files are more than XML documents, so we can decipher some of them and tweak it to do what we want. In the first place, what I list below is the line you're looking for, and the second, the line you want to replace it with.

  Here we go...

  1920,1440
  1,1
  
  0,0,960,720
  0,0,1280,720
  
  960
  1280
  
  1345473880
  1297106761
  
  1685483063
  1297107278
  
  EncoderPresets\SequencePreview\079a6181-acbf-4a6f-b1f2-fb44555a69e0\P2 720p 60Hz DVCPROHD.epr
  EncoderPresets\SequencePreview\cf2f7860-0e56-444f-a64f-74eafec54e44\I-Frame Only MPEG.epr
  
  079a6181-acbf-4a6f-b1f2-fb44555a69e0
  cf2f7860-0e56-444f-a64f-74eafec54e44
  

  It expected to do so. Once again, simply search for the first string in each group and replace it with the second; You can do this massively if you don't really have anything else that change made the multicam. What it should do is changing the size of the frame in the sequence (the first two), because DVCPRO HD is anamorphic and AVC-Intra is full-raster and then the latest re - configure the editing mode and preview of codec. It is a relatively simple change, since you are sticking to the same rate - which would be a more complicated way and probably break of the project folder. I think it will work, however.

  If it works... I love dark beers

• Application of property Caption Text for an entire project changes

  I tried to make a change in a text caption like "BOLD" etc. and it applies to all of the same type of legend in an entire project. This feature really works?

  Hi Benoit Christmas of Tilly and welcome to our community

  I don't think that it apply to all will work in this case. I believe it does not take into account formatting of fonts and is intended for things like the Type of legend, placement etc.

  If you are looking for an easy way to apply things like "BOLD" and whatnot, you can review the method of clicking file > export > project captions and subtitles. This should create a Microsoft Word file. You can then make the changes in Word and save the file. I stand to be corrected here, but I think that when you return back in Captivate via file > import > project captions and subtitles, formatting changes will come along for the ride.

  See you soon... Rick

• Project from existing projects, new installation uninstalls old

  I created a new project, which has many of the same features as an existing project, so I copied the old project, renamed and used this as the new project. When I finished the initial version of the new project and created a release, install uninstalled the existing project.

  New projects installed under a different name, to different folder, EXE has a different name. They do not have registry entries that I created.

  What should I change in the new draft so that they are two completely separate programs?

  Change the GUID, as Ian suggested, should do the trick.

  If you are looking for a more 'official' and sanctioned, approach you need to do is to create a new distribution for your new project. As you do, rather than create new distribution from the bottom up, you can say CVI isntead to copy the distribution of distribution of your old project:

  

• EPA 11 I and she recently used. Erased from my project and now cannot open the new or existing project editor.

  PC computer

  The original Win 7 updated to 10

  When I opened BEFORE it opens to the Welcome screen. If I click on the Organizer, it opens. If I click on the Publisher, it opens on the choice of new or existing project. When I click on one of them PRE closes or disappears.

  If I repeat the same process of the same thing happens.

  I recently completed a 1 h 20 min film that took me a long time to do. IV ' e he has burned down and deleted.

  I've copied and changed then burned about 5 cassettes VHS, some of them on a long hour and 3 1 hours. long. These projects are carried out, and I would like to continue with a new project, perhaps 3 h. long.

  I can't open the editor of a new project.

  For me I can have deleted a necessary element of the program. How to check? What should do?

  [email protected] wrote:

  For me I can have deleted a necessary element of the program. How to check? What should do?

  If so, uninstall, use the Adobe cleaning tool (Yes, it works for Premiere Elements):

  Use the cleaning of creative cloud tool to resolve installation problems

  and reinstall from here:

  Download Adobe Premiere Elements 15, 10, 12, 14, 11, 13

• Drag / drop blocks first on existing projects

  Hello!

  Since a few days, I have a rather strange problem.

  When I open an existing project, drag and drop something in the timeline is blocking the software.

  The cursor will change with the deniy Panel, the cursor turns into a no entry sign as if the media was not authorized or taken in charge (but it works on a new project).

  And, above all: first stay blocked at this point. No matter what I do, my mouse may not interact with the software. In fact, first will respond only to the keyboard shortcuts. I can't even close first. I have to end the process.

  But if I try exactly the same thing in a new project of first, it works normally.

  I recorded the problem so that my explanations are clear:

  Thank you for your attention.

  Most common issue is not source patch tracks.

  

  Also remove the in and out-point over the timeline.

• I can't get 8 Captivate to allow me to paste slides from another project into an existing project

  I am trying to copy some simulation glide of a project in an existing project in captivate 8.  When I go to paste the slide, I do not see the screen.  There is a white background on the top of the screen of the stimulation.  See screen print below.  I need drag 152 to display information like drag 151.  It's in the background of the 152 slide but you can't see him because he's behind the white part of the slide.  What I am doing wrong?  Help, please

  

  Examine the properties for slide 152. Try to delete the Master Page option and see if that changes anything.

  See you soon... Rick

• How can I request a model of design to an existing project, and...?

  I made some customizations to one of the design templates and saved these changes.  I want to have these changes applied to existing projects or new, how do I do it?  Also when you make customizations to the design model, I seem to be able only to make some changes.  For example: the first point is a TEB - I am able to change the legend of success and failure boxes but only with regard to style, I can't seem to change the text.  It reads 'Success Type text here.'  I want to always read "Correct!"  so, how can I implement this without having to change the text for each item in the project?

  Thanks for your time!

  Tami

  Hello

  btjra wrote:

  I made some customizations to one of the design templates and saved these changes.  I want to have these changes applied to existing projects or new, how do I do it?

  After you create your design template, you apply when opening a project that you want to apply the template to. Then, you click the window menu and choose the design template.

  

  This opens the design template Panel. From there, you choose a template to apply to your project.

  btjra wrote:

  Also when you make customizations to the design model, I seem to be able only to make some changes.  For example: the first point is a TEB - I am able to change the legend of success and failure boxes but only with regard to style, I can't seem to change the text.

  Indeed, you can request only the Visual characteristics. The text is influenced by the object later in the draft edition.

  btjra wrote:

  I want to always read "Correct!"  so, how can I implement this without having to change the text for each item in the project?

  Thanks for your time!

  Tami

  I don't think that you will be able to influence it. Not with a design template. What you can do is to create a pre-configured model project with the legends. Then you could copy and paste as needed to accomplish it.

  You add your voice to others who wish to see greater flexibility with default settings such as what you're asking. To do this via the Wish form.

  See you soon... Rick

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcerStone blog Captivate eBooks

• Mail creates a new contact for already existing contact card

  I recently find cards duplicate in my contact list that were apparently automatically created sort of correspondence. If I e-mail to Joe Blow, whose address is [email protected] in my Contacts, the e-mail address will be displayed without the name attached to it. The courier will say "to: [email protected]"instead of "Joe Blow.". " I'm in my contacts and see the two cards, one with the name and address and whatever other information that I have to contact and a second map which is completely empty except for the e-mail address.

  I had two recent changes. I upgraded from Yosemite El Capitan and my employer like us all on a Microsoft Exchange Server. As far as I know, the problem above isn't to Exchange. I see them duplicate that in my Mac app Contacts contacts, not in the list of Contacts online for the Exchange.

  If anyone knows what is happening and how I can stop the Contacts for the creation of new maps for already existing contacts, I'll be very grateful to hear from you.

  Rob

  Please open Contacts preferences window and select the general tab, uncheck the box marked

  See the establishment of contacts in the mail

  See if there is an improvement.

• Change the default format for burning discs of this system active files in the ISO image format

  How can I change the default format for burning discs of this system of active files to ISO image format?  I don't want the active file as the default system and really don't want to have to choose what I want to use the default every time.  It's boring. I have Vista x 64 on my computer and have not yet adapted to all the changes in XP.

  Thanks, but it's not useful.  It is more that an 'improvement' Microsoft did that, as I fear, is a total and far failure to be an improvement.  It also means that I'll just use a 3rd party program to burn all my CD/DVDs.  You know if I wanted to be able to remove, reformat, etc.. CD/DVD I would use those rewritable.  That's why they exist.