Project from existing projects, new installation uninstalls old

Similar Questions

• Ports of Rellocate Eth from existing to new vDC vDC

  Hello

  I have an existing pair of Nexus 7009 with a #1 (except the admin vDC) VDC. Each of them has SUP2, OS 6.1 (2) 5 x 2 - FAB and N7K-M148GT - 11L, linecards N7K-M224XP - 23L.

  All the line card ports are currently assigned to the vDC existing #1

  I need to create a new #2 vDC and reallocate certain ports in order for use on the new vDC. for example, a couple of ports for the persistent connection to vPC, peerlink and vPC.

  My concerns are:

  (1) I know that ports reallocated will remove their current config when moved to the new vDC #2 during the process of reallocating the

  However I don't know if there is any disruption on the line card ports that will be kept on vDC #1. they suffer any beat or whatever it is?

  (2) is there a procedure or an existing configuration guide to reassign ports vDC to an another VCC to follow?

  Thank you!

  Please find my responses inline: -.

  (1) I know that ports reallocated will remove their current config when moved to the new vDC #2 during the process of reallocating the

  However I don't know if there is any disruption on the line card ports that will be kept on vDC #1. they suffer any beat or whatever it is?

  Answer:-there will be no disruption on the line card. Other ports will work very well.

  The only failure you will see when you move ports between the TDC is on the ports themselves. By default - the config they are filled in with on the new VDC is just shutdown. If the devices attached will have their lower links up to that you configure and unshut interface.

  (2) is there a procedure or an existing configuration guide to reassign ports vDC to an another VCC to follow?

  Answer:- http://www.cisco.com/en/US/docs/switches/datacenter/sw/5_x/nx-os/virtual...

  Only allocate interface will do the job for you IE spend a vdc interfaces to other vdc.

  HTH

  concerning

  Reem

  * Please don't forget to rate if useful post *.

• new installer remove old exe

  Hello

  I have an installed program generated by labview.

  When I generate a different Setup with different destination file and the name after the installation of the removed!

  Why is it happen?

  Best regards

  

• My PC crashed. Restored on a new record and a new installation of FireFox. I can still access all the files. How do I take the old bookmarks if there is no backup?

  My PC crashed. Restored on a new record and a new installation of FireFox. I can still access all the files on the old drive. How do I take the old bookmarks if no backup exists, or has been completed? Does not save bookmarks of FireFox auto? If, then what is the file name and where is normally stored by FireFox?

  In fact, it can be easier...

  If you have the old drive connected as, say, drive E, go to:

  E:\Users\username
  

  Then click in the address bar and paste it after this and press ENTER to open it:

  \AppData\Roaming\Mozilla\Firefox\Profiles
  

  Normally, you have only one file, which has a random string followed by "default." In this case, click on this file and find the subfolder bookmarkbackups.

  If you find multiple profile folders, look inside to find the most recently updated backups.

  To restore the backup files, see: restore bookmarks from a backup or move them to another computer

• going from 3.5 to 4 with a new installation of vcenter Server

  Hey

  We want to use a new server and a new installation of virtual center 4 to connect to our existing ESX 3.5 servers. am I right in thinking I can disable DRS and HA, then simply disconnect them from the old server and connect them to the new server? (I'm not worried about performance data at all)

  then we will upgrade the tools of virtual machine on virtual machines and then the real hosts go to 4.

  its ok?

  see you soon

  Here is the information that I have followed the vCenter of moving to a new server. Worked like a charm. Let me know if you need anything that anyone else.

  http://KB.VMware.com/kb/5850444

• Installed new HARD drive with the new installation of XP, old HDD ShowAs saw as the active partition, how to change this?

  I installed a new HARD drive with a new installation of Windows XP Edition family. I want to keep the old HDD and reformat the drive, but I can't because the second HDD is listed as active in the management of the computer. Why? It's not the drive that contains the operating system (Windows XP) that is initialized from.  I put the BIOS such that the new HARD drive is the boot drive. The old HDD has Windows XP on it, but isn't the startup disk. I just don't understand.
  If only the new HARD drive is installed, the computer management doesn't show that it or any other of its partitions are the active partition (C drive is listed as the system partition, of course).

  How can I get an active partition and no active partition when the new HARD drive is installed on a HARD drive that is not the boot drive, when I have two hard drives installed?

  In case it is necessary, the new HARD drive is a SATA and the old HARD drive is IDE with the cavaliers as a slave.

  The system partition is the Active partition. The system volume contains the system files needed to start Windows, Windows XP, these system files are:

  NTLDR
  Boot.ini
  NTDETECT.COM
  Ntbootdd.sys (present/used only with older SCSI controllers)

  Windows files are not necessarily on the system volume, they can reside on another volume, when on a different volume this volume holding Windows files is called the boot volume.

  When you install Windows on a computer, playing a mixture of IDE and SATA setup discs tends to favor with IDE drives on SATA drives and tends to use the IDE drive to house the system partition, (even if Windows is installed on a different drive).

  Running the command SYSTEM SET at a command prompt may shed some light on the problem...

  John

• Can update new installation failure Win7, I transfer files from another pc to solve?

  So I have 2 computers win7 home premium 64-bit, one is a desktop computer and another is a laptop. The old hard drive died for the laptop, so I bought a new ssd to replace. However, im from the difficulties of installation of windows update on the laptop. So I was wondering is there anyway to transfer updates from my office to my laptop?

  Is it possible using only microsoft software to create an image backup or system that can be used on the laptop from the desktop?

  I have a flash drive that I would like to transfer files or use as a backup, is this possible and can tell you me the steps or link me to something that can explain it using microsoft software only.

  Please and thank you for your help.

  I tired using the installer from microsoft windows update and that froze just too when I tried to download updates manually.

  Windows 7 update problems? First read this.

  :)

• new hard drive - what is the difference in performance between the new installation of Windows 7 or a clone of old hard drive?

  I get a new hard Hard Drive (SSD).  The new disc is the same size as my existing SATA drive.  I can do either a new

  the installation of Windows 7 or a clone old hard drive?  I would prefer to clone the old hard drive and keep all my settings, etc.   It's empirical data on the performance difference between a new installation of Windows 7 or to continue with the Windows 7 which was 3 or 4 years ago.

  I know the conventional wisdom is that the new installation is faster, but, no matter who actually tested and compared the differences?  I know I'll get better performance of the SSD the SATA drive, but I don't know if it's worth the hassle to do a fresh install and redo all my programs and settings.

  Others that the performance of the SSD you should not see any differences.  If you do, you can always do a clean installation later.

• Add existing DNG to the new installation of Lightroom

  Hi all

  Simple question here... How can I import metadata from existing DNG in a new installation of Lightroom?

  Is it still possible?

  Thank you.

  Yes, you would be able to import the DNG files, that shouldn't be a problem.

• Email records retrieved from a drive Thunderbird crashed. You want to import into my new installation.

  Tried to copy/paste the files recovered in profiles/Mail/Local folders in my new installation, but without success. I can't find an option to import messages from a folder. Any ideas? Thank you!

  Re: tried to copy/paste the files recovered

  Are you sure you are copy/paste the correct data?
  Emails are stored in files mbox, no records.
  MBOX files don't have any extension.

  As an example, in the image below, it states:

  • Inbox (mbox file containing the e-mail)
  • Inbox.MSF (indexing file - no emails)
  • Inbox.SBD (if created subfolders of Inbox. This folder contains more than mbox and indexing of files)

  Note:
  Thunderbird should be closed when copy paste or do anything in profile files.

  There is also an add-on which is pretty good.
  Download downloads folder or desktop.
  https://addons.Mozilla.org/en-us/Thunderbird/addon/ImportExportTools/

  Install:
  Tools > Addons or Menu icon > Addons
  Click the gear icon and select "install the addon from file".
  Locate the downloaded xpi file and click Open
  You may have to restart Thunderbird.

  Right click on "local folders".
  Select "Importexporttool" > "import a mbox file".
  Select: "import directly one or more mbox files" and click OK
  Find the mbox files, and then click Open.

• Link new installation of thunderbird with the old profile.

  I created a new profile and stored on an external drive, there is a certain messages, I just had to reinstall win7 and do not know how to link a new installation of thunderbird with my old profile. Seems fair to get a host of issues that do nothing.

  Look at https://support.mozilla.org/en-US/kb/profiles-tb#w_how-to-find-your-profile and then go to the directory corresponding to your external drive to find your old * *.default file.
  Copy your old profile to the directory where your current profile is stored.
  See https://support.mozilla.org/en-US/kb/using-multiple-profiles to switch to your old GOLD "profiles.ini" edit profile to change the 'path' in the name of your old profile.
  Restart Thunderbird.

• Why FF act as if each start is a new installation and hang on to old tabs?

  I updated Firefox to version 8.0.1 to 9.0.1 about an hour ago, and it has been wrong since. I suspect it's a matter of preference, but I'm not sure.

  Every time I have start FF (or restart), he seems to think that this is the first time, it was run / installed. It checks the compatibility of each extension, once again.

  It also opens a new page in "Welcome to Firefox hooray... "as if it were a new installation. Each time, it adds a new tab with this message. Address, it opens:

  http://www.Mozilla.org/en-us/Firefox/9.0.1/whatsnew/

  In addition, it does not follow my load on startup home page settings. It sticks with the old tab rather than that it should open.

  I've already gone through and tried to use the information on the pages of the forum helps:

  https://support.Mozilla.org/en-us/KB/Firefox%20Has%20just%20updated%20tab%20shows%20each%20time%20You%20start%20firefox?s=page+opens+on+startup & r = 8 & As = s

  and

  https://support.Mozilla.org/en-us/KB/preferences%20are%20not%20saved

  They do not seem to have helped matters. Of course, I don't know exactly which lines in the Prefs.js file should be deleted, but I took:

  user_pref ("browser.tabs.closeWindowWithLastTab", false);
  user_pref ("browser.taskbar.lastgroupid", "Mozilla.Firefox.8.0.1");

  ... and the problems persist. I don't want to go lift more information that I do not understand. Thanks for any help.

  Oh, and I made sure there is no running session restore feature, AFAIK (including TabMixPlus). My settings of homepage in the menu Options are correct.

  To summarize:

  (1) stop FF to think every start/restart is a new installation.
  (2) get my home page to load to the correct address.

  I don't know what the problem with the old profile, and in this case, it is easier to try a new profile, that spend a lot of time to devote to what is wrong. It could be a prefs.js file or a problem with the registry extensions file or a problem with the files sessionstore or something else.

• With the help of files from a Linux saved / home folder hierarchy, how can I get these bookmarks in new installation?

  Prior to this announcement, I read the information available on import-export-backup but unfortunately, I became very confused.

  Location:

  On my PC at home, I backed up my Ubuntu + Mint/home folder [dual-booting to installation] trees on a flash drive. In the two Ubuntu + Mint, I used Firefox 3.6.3

  Now, I installed Mint with Firefox 3.6.3 on a new hard drive.

  In my new installation of mint + Firefox, how to use the files in my backup folder trees / home to give my new Firefox these same bookmarks?

  I have never "exported" or "supported" My Favorites; I just copied my trees set/home folder on a flash drive, assuming that the files would be there when I need them. I see a bookmarks.html file in my new installation, but it seems only toolbar links and not a few bookmarks, I created in the past days. And I don't know what to do with the file "places.sqlite".

  Should I find "places.sqlite" files in the backup folder tree / home and copy / paste them somewhere on the new hard drive?

  I didn't want to risk experimenting this - could hurt!

  Thank you very much.

  Firefox 3 and later no longer use bookmarks.html to store bookmarks.
  
  You can restore latest JSON bookmarks in the folder bookmarkbackups or copy places.sqlite on current Firefox profile. Both methods will replace the current bookmarks with the new bookmarks, so I you must preserve existing bookmarks and then export them to a HTML file and import this file later.

  See:

  • http://KB.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox

• Can I transfer my old regsitry to a new installation of clean boot of windows 7

  Can I transfer my old register to a new installation of clean boot of windows 7?  If so, how this is done?  Without a transfer, it is necessary to reinstall all my software and it is very time consuming.

  You will not be able to transfer all the registry settings. Unfortunately, you will need to reinstall everything.

• I had to reinstall all my programs and data to a new disk, the old crashed. During the installation of Flash Player, I can't go any further than the password stage as he rejects. Again the username and password have been accepted without any problem to ac

  I had to reinstall all my programs and data to a new disk, the old crashed. During the installation of Flash Player, I can't go any further than the password stage as he rejects. Again the username and password have been accepted without any problem to access Adobe.

  Strangely the same problem occurs when I try to install and older version of Lightroom 4.

  Can you help me?

  Hello

  It is the OS, not Flash drive, to ask for the password.  Please refer to the FAQ what userid & password I need to install Flash Player? for assistance.

  --

  Maria