Change or remove the default record for redacted documents

Similar Questions

• I bought my computer from someone else. Change user accounts did not name of each file in the computer. How can I change or remove the user/name (my name) /document? __

  I bought my computer from someone else. Change user accounts did not take their name off of each (or more) file in the computer. How can I change or remove the user/name/document
  I have looked everywhere and changed user information and the name of the administrator. What can I do else?

  Hello flashgordonjxn,

  Who has ever done the installation of Windows, the installation program asks you to enter your name and optionally, the name of the organization. These registration information appears under recommended for in the general tab of the System when you click Start, click Control Panel, click performance and Maintenanceand then click System.

  To change see instructions below:

  1. Click Startand then click run.
  2. In the Open box, type regedit, and then click OK.
  3. Look for the following registry key:
     HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion
  4. To change the name of the company, follow these steps:

     In the right pane, double-click RegisteredOrganization. Under value data, type the name that you want, and then click OK.

  5. To change the name of the registered owner, follow these steps:

     In the right pane, double-click RegisteredOwner. Under value data, type the name that you want, and then click OK.

  6. Click Exit on the file menu to exit the registry editor.

  Hope this helps you. Let us know anyway. Make it a great day!

  "And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• Remove the security settings for a document can be inserted in the annex.

  I have a document provided by someone to add an annex to my report.  However, the security settings are in place because the document was "signed" and it will not allow my to insert in my report as an annex.  I tried "printing" to PDF and create a word document.  I try to avoid printing a hard copy and analysis 190 pages by making very large file size.  Is it possible to disable the security settings or remove the signature, so it can be inserted?

  OK, if you believe that you have the right to use the document, security permissions can be removed by a number of third parties which are available utilities. I use this one: http://www.elcomsoft.com/apdfpr.html

• Can I change the default folder for new documents Pages?

  When I run the application Pages, the first thing I see is a Finder window. For some reason, this Finder window invariably opens, not with the Documents folder, but in a specific subfolder of the folder images. Sometimes I use this folder as source for the photos that I insert into documents, but I don't want to see this folder every time I run the application Pages.

  How can I control this behavior? I see nothing in the preferences page to set a default value.

  When you launch Pages, you will be presented with a file picker (not the actual Finder). The left sidebar will be a folder of Documents, you must select. At this point, you can simply stop Pages. He will remember to open in the last selected folder and on the content of the Document folder, you will see a file chooser. As long you open, edit, save, or export documents in the Documents folder, it will remember this folder.

  If you change the location of the folder memory, whether it is in the file picker, or save or export to another location of the folder, and then the next launch of Pages will direct you to the last used folder location and not the location of the Documents folder.

  There is no user parameter which can be set to always override the behavior of Pages above.

• Change the default format for burning discs of this system active files in the ISO image format

  How can I change the default format for burning discs of this system of active files to ISO image format?  I don't want the active file as the default system and really don't want to have to choose what I want to use the default every time.  It's boring. I have Vista x 64 on my computer and have not yet adapted to all the changes in XP.

  Thanks, but it's not useful.  It is more that an 'improvement' Microsoft did that, as I fear, is a total and far failure to be an improvement.  It also means that I'll just use a 3rd party program to burn all my CD/DVDs.  You know if I wanted to be able to remove, reformat, etc.. CD/DVD I would use those rewritable.  That's why they exist.

• I want to change the default printer for Firefox how can I do this?

  When I choose to print in Firefox it uses my printer copier not my default printer. So how can I change the default printer for Firefox?

  In Firefox 'by default' is the last used printer. If you switch to a different printer, Firefox to remember that a new 'default' - unless you have disabled this setting in all: config. Print.save_print_settings

• How can I change the default zoom for the new tab only?

  The new tab in Firefox 33 zoom is too high to see all 12 of my thumb nail. I changed it using ctrl - but the next time I opened a new tab, the zoom is 100%. How can I change the default zoom for the new tab only?

  I posted a style rule to shrink the tiles, which allows several of them on the page, but naturally reduces their legibility. You can experiment with the dimensions to find a look that works for you.

  https://userstyles.org/styles/106326/shrink-new-tab-thumbnails

  I use the Stylish extension to experiment because of its preview function that allows me to see the effect quickly. You can install it from the site of modules, then after restart of Firefox while searching for his "S" icon in the toolbar to manage Styles so you can edit and experiment.

  https://addons.Mozilla.org/firefox/addon/stylish/

• How can I change the default language for the spell checker? -solved, somehow...

  As the previous thread was closed without a real resolution - https://support.mozilla.org/en-US/questions/941350?esab=a & s = & r = 0 & as = s

  I managed to solve this problem on my end by reinstalling just firefox using the location of the language of the dictionary by default that I wanted to leave here - http://www.mozilla.org/en-US/firefox/all/

  A shame that the main download page does not select the relevant location for you and still more for changing the default language for the spell checker built is so much kak. Well.

  Right-click web page

  • [x] check spelling

  Language > choose language for spell check...

• How to change the default path for documents and settings

  How to change the default path for documents and settings

  I try to change in the registry, but the profile can create but error! had no choice to change the default path % lecteur_systeme % d: /.

  Hello

  I suggest you to download TweakUI, this could help you or get you headed in the right direction
  http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-XP

  Also this KB could help as well:
  http://support.Microsoft.com/kb/236621

  It will be useful.

• How to remove the default for a limited only account gateway (with static ip address)

  I have 1 pc with 4 accounts 1 account administrator and user the rest is limited accounts. I use a static ip address and the question is how to remove the default gateway on these limited account so that they cannot access the internet

  The entry door is fixed to the adapter and selectively cannot set properties of the different adapter for different users, all users use the same adapter.

  With Internet Explorer (does not work with other browsers), you can configure a proxy server with a fake address, you can do this through Group Policy, or you can do it manually for each individual user through the Internet Options settings.  You can set the proxy server address map of loopback (127.0.0.1) or you can set it to a bogus address of your private address range (usually the range 192.168.xxx.xxx)

  If you are using other browsers, you can use NTFS permissions to deny access to the Explorer or the program directory or you can use software restriction policies to deny access to specific programs.

  Alternatively, you can use a logon script to activate the network connection service when you open a session and the other to turn it off when you log, but if you do this you will disable the entire network for limited users if it cannot be a solution for them.  The script can be a simple two-line script:

  Logon script:

  SC config Netman start = demand
  net start netman

  Logoff script:

  net stop netman
  SC config Netman start = disabled

  These can be useful:

  http://www.howtonetworking.com/Internet/restrictie11.htm
  http://www.christianblog.com/blog/abelajohnb/disable-Internet-access-in-Windows-for-specific-user-accounts/

  John

• Change the default DPI for scanning in paint

  How can I change the default values for scanning for painting so that each scan is 300 dpi?

  I'll give you an answer. What the interrogator does not understand, is that MS Paint does not have a setting for the CIO. There is no default DPI setting in MS Paint. The setting is controlled by the scanner driver or scanner itself. MS Paint simply communicates with the driver for the scanner, which then continues to do the analysis, then once completed, he hands the digitized data back to MS Paint. Therefore, the parameters of the interrogator wants to know how to change are not in MS Paint. they are in the driver scanning interface. This driver determines how he manages the parameters after returning the scanned data to the connection/disconnection of call program, in this case MS Paint. Most of the drivers scan all right back to their default value. In the case of the user, it's 100 dpi, but another scanner, this could be 150dpi (common with many scanners a few years back), and by default most recent scanners often at 200 dpi. After scanning, you need to change the defaults anywhere from new, because once the scanner driver handed the scan back data to the calling program, it is no longer in communication with her. It doesn't matter whether you use MS Paint, Picasa, IrfanView, or any other program that connects to the scanner TWAIN. If you start with a scanner that has a default of 300 dpi, you would have thought that it was a question on. You can not insistent that no one answered your question if it is based on the wrong premise at first.

  Some scanners allow control of the scanner itself. I use a HP (all-in-One) printer/scanner combination. I can configure default to the control panel of the printer/scanner at 300 dpi or whatever value I want; I often put it at 600 dpi. Then I can scan directly from the scanner/printer and still get 300/600 dpi scans. By default the program to manage the registered file type determines which program will be executed when the image is sent to the computer. It could be MS Paint or IrfanView or whatever. Very often, I send the scans on a SD card on the printer instead. When I'm finished, I have a SD card with images scanned at 300 dpi that I take to another computer. Because the scanner/printer has been set to use 300 dpi by default, MS Paint, IrfanView or any other program that launches a scan will get also 300 dpi scans.

  What the questioner needs is a scanner which allows its default value to or one that is default to 300 dpi in a first time. If you try a new scanner, you will find that the parameters does not return to 100 dpi, but instead has regardless of the definition of the scanner as default.

  Given that most of the pilots to simple scanner always return to the default devices, and in this case, setting this parameter scanner is only 100 dpi, you can use a software that is specially designed to solve this program with its own resolution settings. An example is called "search". In its interface, you choose what the desired resolution, then when it communicates with the scanner, he deals with the change in the value whenever a scan is requested.

  If you use color or grayscale is a separate choice outside the DPI setting. Some scanners can scan to a different resolution for shades of gray than they do for the color. Nevertheless, the problem and the solution is the same.

• Changing the default settings for printing in Office Picture Manager

  Anyone know how to change the default setting for printing in Office Picture Manager?

  I have a user who clams that when they try photo printing settings in Office Picture Manager has been configured to print bac2 and paper 4 x 6.  Now when it prints, it must use the drop-down list boxes to tell it to print from bac2 and paper 4 x 6.
  I changed the default settings of the printer to print from the bac2 and use paper 4 x 6, but they must still use the drop-down list boxes in Picture Manager.
  Thank you!

  Although I maded the changes to the properties of the Windows printer I had to do that to solve the problem.

  To solve the problem:

  1. once in the print of the image window there is a link 'Options '.... "at the bottom right.

  2. once it's a click a print settings window that opens there. You will need to click on the link 'printer properties '.

  3. now the printer Document Properties window appears. Change of Source paper and media here.

  4. click on the OK button and now it's good to go.

• Change the default search for small native browser (Lollipop) engine

  It does not seem possible to change the default search for the small browser engine.  I would like to change from the current, Google, DuckDuckGo or similar.  Anyone know how?

  FYI: the 'small' browser is the first reached by pressing the button of the Application selector and selecting the browser available by default in the list of small applications at the foot of the screen.

  1. open the small browser
  2 menu
  3 settings
  4 Advanced
  5. set map search engine
  6. Select a different search engine

• Change the default icons for folders in Windows 7

  In the past, I have created different icons for a lot of file.

  When I transferred some old files for Windows 7, it seems not correct.

  It is confusing to me.

  I request assistance to change the old icons for the default icons for folders in Windows 7.

  Thank you

  Hello

  Welcome to the Microsoft Answers site. I answered the same question in the following thread:

  http://social.answers.Microsoft.com/forums/en-us/w7files/thread/b78d839b-c668-4EFD-A391-24e664a875bf

  Please let me know if it works for you.

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I change the default icon for a file type

  Hey there,

  I know I did in Windows XP and I am hoping there is a way to do this in Windows 7.

  How can I change the default icon for a file type?

  I want to have all my .sql files appear with a regarless of the specific program's icon is defined as the default program to open with.

  I did some research, but he has only led hacks registry, I tried but not lucky? Does anyone know of a way?

  Here is a free software that will do it without risky registry changes.  Of course I would recommend when even take a few seconds to create a system restore point before using it, just to be sure.

  File of Type utility for Windows 7: http://types.sourceforge.net