Change settings with ExtensionData?

Similar Questions

• I don't know how to access the online interface to change settings with WCG200

  With my old router I just typed something in the address bar of my browser to access the securtity settings, and I read with this WCG200 router I need to type my ip address in the address bar, but I still get nothing. I can put other peoples what IP I will be asked to enter a name and a password, and put in my own IP gives me nothing, but a page load error.

  I'm trying to open a port like I did with my old router, but I can't do it with this one. Any help would be appreciated.

  You must type the IP address of the WCG200 and not the IP address of the computer connected to the network.

  To find the IP address of the WCG200 you must click on start > all programs > Accessories > guest... A black box will appear (command prompt)... In the command prompt window type ipconfig and press "Enter"... Look for Ethernet adapter Local Area Connection address IP, subnet mask, and default gateway...

  The default gateway address is the IP address of the WCG200...

• Changing settings with Dell Media Direct

  Is there a way to change Media Direct so that when a video is loaded, it does not automatically open upward? I try to use Picture Motion Browser from Sony but says that my drive is used by another program, which turned out be Media Direct. If I remove the program for Media Direct, I'll be able to download it again? Thank you very much.

  -Alicia

  
  

• using Notepad, when I open My Notepad program to look at a text doc, all I get is lines of code. How to change settings?

  using Notepad, when I open My Notepad program to look at a text doc, all I get is lines of code. How to change settings?

  Hi Josephhenry,
  the notebook is only for the most basic of .txt files. All the more complicated files will be displayed incorrectly, you will see only the forms. Try to open it in wordpad.
  Hope this helps
  Eddie

• How can I restore my system XP to factory settings with on a boot disk? System Restore won't let me back to a date. I need to clean and start over with on a XP boot disk.

  How can I restore my system XP to factory settings with on a boot disk? System Restore won't let me back to a date. I need to clean and start over with on a XP boot disk.

  You will need to go on the manufacturer of your pc and then ask for a windows xp disk and drivers. This will give you a new copy, but not out of the box state. For an out of the box, get a recovery disk. Just answer what you want.

• I have change directry with reg edit now impossible to uninstall a program and cannot sett advance adjustment system

  I have change directry with reg edit now impossible to uninstall a program and cannot advance the system put forward sett it was drive c was my default directry, but I put as a default and no command does command-line pls tell me how to set the drive c again as defaulat I use vista. can't open the registry.

  I have no backup also cannot restore

  Hello

  (1) why you did registry change?

  (2) you receive an error message when you try to uninstall the program?

  (3) do you have with you Windows Vista installation disc?

  I suggest trying this method and try to install the program.

  Problems with programs that cannot be installed or uninstalled. http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  If the problem persists always, respond with more information for you to help.

• Administrators password has expired and I can't seem to change even with a backup drive

  original title: password expiration

  OK so my administrators password has expired and I can't seem to change even with a backup disk can anyone help me pleasssseeee!

  Hello

  ·         Your computer is on a domain?

  If the computer is on a domain, you may need to contact the system administrator for the renewed password.

  Microsoft cannot help you recover passwords for Microsoft who are lost or forgotten products. You can go through the article below.
  "Microsoft's strategy concerning lost or forgotten passwords"

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Change user with windows 7 starter?

  How can I change users with Windows 7 starter?  It was suggested to press START, then STOP then CHANGE USER, but there is no CHANGE of USER option.

  Windows 7 Starter Edition doesn't have a switch user option in the menu.

  You must close and re - login as the new user.

• development module when I change something with correction of the area I can't move to the next image with the right arrow key

  Hello

  I work with the module development and when I change something with correction of the area I can't move to the next image with the right arrow.

  Is there a solution?

  Norbert

  I think that Yes you are talking about "Spot healing.

  So once you have used the tool, please click "Fertig" at the bottom right of the image.

  Try, and then use the arrow keys.

• Manipulation of Camera Raw settings with javascript

  Is it possible to manipulate the Camera Raw settings with a javascript script? I look for info on this and have had no luck finding one.

  What I do is several conversions from a single RAW file set at different exposures, shine, edges, etc.

  Here are the basic steps:

  1. open the RAW file in ACR.

  2. adjust to a reference image.

  3. open an image as an object in Photoshop.

  4 duplicate this layer of objects and run "Edit settings" on this new layer.

  5. make adjustments *.

  6. click OK to apply the new settings to this layer.

  7. Repeat steps 4 through 6 on the original layer as many times as necessary.

  I had all this work I want, but I would like to be able to automate step 5 for some file types so that it will set the parameters for me without going through the dialog box to do this. The parameters I really want to be able to adapt to this way are exposure and brightness and if possible, I would like to put them in touch with the parameters of the original layer for these parameters.

  Here's what I had in mind. Note that the document is the same size as the raw file. This will place 5 copies of the raw file in the activeDocument, each with a different exposure.

  var rawFile = new File( "~/Desktop/DSC_5396.NEF" );
  var xmpFile = new File( "~/Desktop/DSC_5396.xmp" );
  var exposures = ['-2.0','-1.0','0.0','1.0','2.0'];
  for(var e=0;e		   

• Portege A600 Webcam software crashes when changing the settings with the sound muted

  I have a problem with XP Toshiba factory build for Portege A600 and Portege R600.
  If you try to change the sound properties of the Webcam using the Camera Assistant Software with the sound muted, the camera wizard app will hang & Windows fails to shut down or even stop. The only way to stop is pressed the power button until the machine stops.

  So far, the only solution I can come to is to increase the volume to zero rather than using the mute box. The problem is if you forget and mute rather than turning down and then try to change the sound properties, its "game over." In addition, it is not really satisfactory because politics is to keep the machines muted until the sound is required.

  This does not happen with the Vista Build, build it only XP.

  My guess is that this will not happen on any machine using the Chicony Webcam & software with the Realtek HD audio but I have not tried on machines enough yet to be sure. So far, I've recreated on two A600s and a R600. The machines are not defective and you can create the problem, "straight out of the box. Just do the following:
  (1) use the provided Toshiba product recovery DVD for restore factory Toshiba Windows XP SP2 version
  (2) once you have done the whole stuff, mute
  (3) open the Camera Assistant Software application & to select Properties
  4) click the audio settings tab

  That of all, suspended. The Camera Assistant Software version is 1.7.209.0807L which seems to be the last being available for download on the websites of Toshiba.

  Someone has encountered this or have any suggestions?

  Hello

  I n t have a Portege but U400 with pre-installed and integrated webcam Win XP.
  I installed a clean Win XP and then upgraded the XP to the last State and installed all the drivers available from the Toshiba page and possible.

  I followed the steps in your message and I have to say that I didn t notice strange questions, software webcam still works correctly

  I put t know what could be the problem, but I recommend that you check the audio driver to update maybe you can use the Realtek page
  Also, check if the BIOS has been updated to the current state and if your Windows XP is up to date.

• Changing settings of Windows Firewall with error 0 x 80070003 code and may also depend on the Windows Defender, saying that he can not impossible to find the path.

  Hi, I discovered I can no longer change the firewall settings or turn on Windows Defender... I get an error code 0 x 80070003 "cannot change the settings. Windows Defender will also not start by saying that it cannot find the path. The Base filtering engine is running in components and firewall services and the advocate are set to automatic but is running.

  I did a sfc/scannow from an Admin command prompt, but found no errors.

  Thank you

  Tony

  Original title: access to the Windows 7 firewall problem

  Hello

  You don't give us enough information on what anti-virus or anti-virus Suite you use.

  Thanks for the reply...

  I am very prudent and wise when online and regularly scan my computer with scanning of Microsoft System but I find too slow the computer anti-virus programs don't have for the moment.

  That's why I am a little concerned that I can't access the settings of firewall or defender.

  I also refused access to my files in the file manager even if I am the only administrator and user.

  So I still have the problem

  Tony

  Chances are you are infected you don't have an installed anti-virus program; Careful how you are on the Net.

  Infections by software malware will be disable firewall and disable your other security program, Defender, to work.

  Install Microsoft Security Essentials:

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=5201

  _______________________________

  And you need to scan your system (one program are not all evil)

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware (do not select the option Trial) and if necessary do in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  'Advanced options boot (including safe mode).

  http://Windows.Microsoft.com/en-us/Windows/Advanced-startup-options-including-safe-mode#1TC=Windows-7

  _______________________________________

  And also scan with the free version of SUPERAntiSpyware

  http://www.SUPERAntiSpyware.com/download.html

  SUPERAntiSpyware Free Edition is 100% free and will detect and remove thousands of Spyware, Adware, Malware, Trojans, KeyLoggers, Dialers, Hi-Jackers, and worms. SUPERAntiSpyware features many unique and powerful technologies and removes spyware threats that other applications fail to remove.

  SUPERAntiSpyware Free Edition does not include blocking in real time or scheduled scan.

  ______________________________________

  THS is a very good program to scan your system to remove adware, etc.:

  http://www.bleepingcomputer.com/download/adwcleaner/

  AdwCleaner is a program that finds and removes the Adware, toolbars, potentially unwanted programs (PUP) and browser hijackers from your computer.  Using AdwCleaner you can easily more of these types of programs for a better user experience on your computer delete and while browsing the web.

  _____________________________________

  And just to be sure, nothing is lurking in the background:

  'TDSSKiller Rootkit Removal Utility download for free'

  http://USA.Kaspersky.com/downloads/TDSSKiller

  See you soon

  :

• Startup of FireFox as empty after I changed the settings with the word chrome

  My problem went from bad to very bad as follows
  (1) when I pressed a new tab, Firefox would add a chrome url address that I didn't.
  So I did some research and it seems that I need to change browser.newtab.url and set it to "subject: empty.
  .
  This would have been fine, but I went far
  (2) I did a search for the word "chrome" and a lot of parameters came I went and changed anything, I could and make their framework "subject: empty.
  .
  When I restarted Firefox, then it started as a small square box and there is nothing in it. No menu, no shortcuts, just nothing.
  So I thought I would uninstall and try the latest version.
  (3) in the control panel and uninstall then install version 33.
  And it is still a small box without content. It is as if the parameters were still held, even if I uninstalled and reinstalled a new version.
  .
  So my question is this. Is it anyway back to get out of this mess?

  Hello, please go to your profile folder (profiles - where Firefox stores your bookmarks, passwords and other user data) and rename the file named prefs.js in something like old prefs.js.

  Please keep references to chrome: / / in the default configuration because they are necessary for the proper functioning - those who are not related to the named browser in a similar way by the competition: https://developer.mozilla.org/en-US/docs/Glossary/Chrome

• How a schedule a claim concurrent with the months change settings

  Hi all,
  
  We try to schedule an application to run on a monthly basis. And date settings need to be adjusted as we would like this work to be performed for that date of the current month.
  
  Is this possible without coding. If so, what are the steps to do this.
  
  Thanks in advance.

  Hello.

  You just need schedule the program to run. Tick the option 'increment date settings performed. " If the
  request contains date parameters, select ' Increment date settings each run' so that the value for this parameter is necessary to adapt the new submission interval. " For example, if the value of the parameter is 25 July 1997 07:00 and the interval is monthly, is set to 25 July 1997 07:00 for the next presentation.

  Octavio

  Published by: Octopus Rex on April 30, 2010 06:26

• Trackpad will not adapt the changed settings

  Hi all, I bought a macbook pro early 2015 of the retina, two weeks ago. Once didn't disable it so it happened in "deep sleep" mode supposedly and since then the trackpad settings do not work as they should for example I activated (before the incident of deep sleep) tap to click on function and now it no longer works even if the setting is still active in system preferences. Another example is the function of the right click. I got it on the option "click on right ', it is still active at the moment (I tried to inactivate them and enable the setting, restart the mac and power off and on again, sleep deep, etc.), but she will not respond to this gesture, however only the 'click with two fingers' gesture opens the context menu. Summed up : all the features of trackpad is not editable, even if I change them in system preferences (I also tried to create a new user and see if the problem is to update, but it didn't work either).

  Help, please.

  PS: Sorry for the bad language and mode of expression.

  Try a reset of the PRAM

  https://support.Apple.com/HT204063

  If this does not help, try resetting the SMC

  https://support.Apple.com/HT201295