Change slot R710 6 disk 3.5 inches in slot 8 disk 2.5 inch

Similar Questions

• Disk space free (compress old files) does not change after you run Disk Cleanup.

  Original title: win. XP disk cleanup

  Win. XP: Free Disk Space (compress old files) does not change after you run Disk Cleanup.  Confused.

  Thank you. VC

  Compress your files, your computer will slow down a lot. I recommend that you don't try this.

• the hard drive of my computer is purchased full.i a drive.how external hard change outside the primary disk so I can download music easily?

  the hard drive of my computer is purchased full.i a drive.how external hard change outside the primary disk so I can download music easily.right now my external backup just my computer that isn't doing me good

  original title: external hard drives

  You don't want to change your external drive to your main drive.

  You can move your music files on the external drive - or you can move other data on the disk to make room for your music on the internal drive.

  What applications do you use to play music?

  As described in the first link below, you can move your full "My Documents" folder on the external drive.  Alternatively, you can simply move your music files.  If such an arrangement would give you a satisfactory performance, however, depends on how your external drive is connected (for example, USB 1.1, USB 2.0, USB 3.0, eSATA, Firewire, network) and other hardware features of your computer.

  Not all of the following conditions will be applied to you, but some of the tips can be useful.

  There are a number of things you can do to- temporarily - free up disk space.  The only real solution, however, is to get a bigger internal hard drive.   You can move the data to your external drive, but if it's the data that you use frequently, slower access times may annoy you.  Therefore, I do not recommend that you move your My Documents folder in its entirety on the external drive, but you can certainly do this by following the related instructions.

  • You can run Disk Cleanup (start > run > cleanmgr > OK)
  • You can reduce the size allocated for the restoration of the system to about 1 GB (right click on desktop > properties > system restore > settings)
  • You can disable hibernation (if you don't use it) (right click on an empty spot on the desktop > properties > screen saver > power > Hibernate)
  • You can disable the indexing of the drive, which will also speed up your computer a bit (http://lifehacker.com/031440/turn-off-indexing-and-speed-up-windows-xp)
  • You can reduce the size of your Internet browser cache (depending on the browser that you use)
  • You can remove most of the $NTUninstallKBxxxxxx files $ following the directions here: http://windowsxp.mvps.org/Hotfix_backup.htm (read the warnings in the gray box first)
  • See also:

  " How to recover disk space on Windows Server 2008 and Windows XP computers? ."

  " Forty ways to free disk space ."

  But none of these answers you will earn really large amounts of space for very long.  The term solution time is a bigger hard drive.

  In the meantime, download and run JDiskReport, that will show you graphically what files take up more space and seem to so indicate what files you must move it to your external drive.  If you want to move an application, you will need to uninstall and then reinstall it specifying your external drive as the installation location.  You can not simply move the files.

• Portege A100: Change the new HARD disk in slave mode?

  Hello, I have a portege a100 laptop, I want to buy a Dvd for my laptop burner and one in mind, even if I need to put my hard drive in slave mode first, that the dvd drive is set as master.
  My hard drive model is MK1032GAX, could someone tell me that it is possible to do so, before buying the dvd burner to 100%.

  Hello

  To my knowledge it s is not possible. The technology of the laptop is different, and you can't compare it with the desktop PC.
  As far as I know, the settings are fixed and you cannot change it. I think that the HARD disk controller is set master and you need to buy a compatible CD/DVD player.
  Player settings are different and the Toshiba service partner can give you more details about compatible CD/DVD players.

• Cannot change the password on disk external HARD Gigastore

  All G´Day. Hope someone can help me and I don't have to format this drive...

  Had recently changed the password disk and curiosity entry "not enough space", as hitting the SPACEBAR once, as the new pw. Repeated, agreed and worked.

  However, now I can't access the drive more. Hit 'space' at the pw prompt will still have the blocked path.

  All old/new password to enter the space just tried. Nothing. The drive was my nearby since so nobody else would not change it in the meantime.

  Got some important data backed up and we hope that me to play around with this option will not end to erase everything.

  Each suggestion and help is very appreciated.
  Best regards
  Dennis

  Hello.

  Unfortunately, in my opinion it is not possible to remove or modify this password without the old password.

  Best regards

• TEMPRO v2 - changing the threshold of disk space alert

  Hello

  I downloaded and installed Tempro v2 on a Satellite A200. It works well.

  However, tempro was a problem that was present in version 1.x.

  Disk space alert low value trigger, much, much too early to the disk space of 25% on any partition. On a modern drive, it is around 15 GB. It's average, far too early to say a problem. I swiched disable this alert - I don't want to do. There seems to be no way (that I can find) to activate this alert to raise to a more reasonable value - 10% left of disk space or a given amount of space left - say 2 GB.

  Y at - it a fix for this or have I missed how to set this value, because I don't want to run without knowing that I'm under low disk space? This alert to 25% is irritating.

  Thank you

  Clive

  Hello

  I don t think you can change this value or parameters
  TEMPRO sends notifications about the status of the entire HARD disk and it is why you received this message.

  I have this tool on my laptop too but didn t find settings that would disable the notification on simple partitions on the HARD drive

• HP 15-102sp sleekbook: change/apply 2 hard disk HP 15-102sp

  Hello!

  I have a HP 15-102sp Sleekbook, and I need to know if it is possible install 2ºnd disk in my laptop.

  I have a 500 GB HARD drive and I want to install an SSD without removing the HARD drive.

  My laptop have warranty and I bought an extended warranty and damage.

  If I change the disc, there are problems with warranty?

  Sorry for my bad English.

  Thank you

  Hello

  No second configuration internal hard drive or optical drive Bay is present in your model. While an internal hard drive is supported to the maximum.

  Manual: http://h10032.www1.hp.com/ctg/Manual/c03733729

  Now if you want to change the HARD drive and SSD instead of it, you can do it with the help of technicians from center of HP service like making yourself requires a dismantling major and warranty will be cancelled if something goes wrong.

  Concerning

  Visruth

• Change of MSCS RDM disk offline after VMware Server or patching firmware finishing or multi path IOPS / s - SQL MSCS RDM disk

  Hello

  Yesterday, we installed a fifth ESXi host at our development center and along that we also had a window of maintenance for other hosts.

  We made:

  • HP Proliant HP Service Pack upgrade to 2014.06.0_784915_001. We have HP BL460c Gen8 servers. The old PSP performed from September 2013
  • Installed patches for ESXi 5.1 U1, the latest 10-15 patches since February. Do not install 5.1 U2.
  • Upgrade VMware Tools on virtual machines.
  • Changed multi path IOPS / s for HP 3PAR from 100 to 1. (esxcli storage nmp ATAS add s "VMW_SATP_ALUA' Pei"VMW_PSP_RR"- IOPS O / s = 1 - c"tpgs_on"v '3PARdata' - M 'VV' EI 'HP 3PAR Custom iSCSI/FC/FCoE ALUA rule')

  After this interview little MSCS SQL cluster stopped working. It does not start because it cannot access the drive. I can see the drive in disk management, but they are all in an offline mode. Can't do anything about them, except a single disc. This one is online!

  Did anyone here have no idea what on Earth is wrong? If I does not tomorrow I have to list a species of Microsoft or VMware. I have not tried to remove/add the RDM-disc.

  Windows 2008 x 64 Enterprise

  SQL 2008 R2

  ESXi 5.1 U1 (latest patches)

  Thank you!

  Finally solved with assistance from HP support.

  Solved this KB KB VMware: change a LUN to use a policy different selection of the path (PSP)

  The "funny", it is that the cluster has been around for 4-5 years and works on EVA SAN and now 3PAR with RR as a policy path, and all of a sudden it stopped working. Perhaps a host profile political trigged in, I don't know. And I could also see and access 5/6 disks, why not 6? And was on the way from RR.

  I asked HP about this.

  Thank you for all your help.

• When you start firefox, pop-up screen wishes to leave firefox to make changes on the hard disk on the computer. I must say yes, or firefox does not start. Next time.

  Is this a problem of firexfox, or something is wrong with my drive? I don't have this problem when you use IE or Opera, Firefox only. I have to let Firefox to make changes to my hard drive, or it does not start. Once I click on Yes, Firefox works. However, when I close Firefox and try to open it again, the thing is repeated with msg popup to change the hard drive...

  Make sure that Firefox is not set to run as administrator.

  Right click on the desktop Firefox shortcut and choose "Properties".

  Make sure that all items are disabled in the tab "Compatibility" in the Properties window.

  • Privilege level: "Run this program as Administrator" should not be selected
  • "Run this program in compatibility mode for:" must not be selected

  Also check the firefox.exe program properties in the program Firefox (C:\Program Files\Mozilla Firefox\) folder.

• Can not change the external hard disk drive letter.

  When I (R) click on the drive that I want to change the box that appears is all grayed out and you can just click on the help line. How can I change this so that I have all the choices available in the box? While I can click on change drive letter.

  When I (R) click on the drive that I want to change the box that appears is all grayed out and you can just click on the help line. How can I change this so that I have all the choices available in the box? While I can click on change drive letter.

  seems apparent question is already answered here... Follow the troubleshooting steps

  http://www.SevenForums.com/general-discussion/39481-cant-change-hard-drive-letter-needed-letter.html

• Unable to save the changes to photo to disk

  original title; Changes to the photo on a CD - R

  That I imported the photos from my computer to a CD - R.  When I mark the photos after their displacement on the CD, my changes are not saved when I eject the CD, and then when I insert it again.   How can save changes so that when I view the pictures on the CD, they are as I have arranged them and not by numerical order followed by alphabetical order?

  That I imported the photos from my computer to a CD - R.  When I mark the photos after their displacement on the CD, my changes are not saved when I eject the CD, and then when I insert it again.   How can save changes so that when I view the pictures on the CD, they are as I have arranged them and not by numerical order followed by alphabetical order?

  =======================================
  You cannot change the files on the CD. You would have to
  copy the pictures to your hard drive and then burn
  the CD, once the editing is complete.

  And they will be always arranged first alphabetically and then
  Digitally. If you need some order on the CD...
  You'll need to organize and number them as follows
  before you add to the CD.

  Organize files the way you want and go to... Edition / select all.

  Right-click the photo 'first' the selected (highlighted)
  Group and from the menu choose... Name change.

  For the first name... Enter a descriptive word for the group,
  a space, and the first number

  Summer vacation (10001) .jpg

  (Yes... Use parentheses and start the number with a 1)
  (If you want to add a descriptive title to batch... Leave a
  space after the last letter and before the first parenthesis)

  Press on... Enter and Windows renames the remaining photos...

  Summer vacation (10002) .jpg
  Summer vacation (10003) .jpg
  Summer vacation (10004) .jpg

  Good luck...

• Change USB problem a disk attached to Buffalo Linkstation Pro.

  I have a Buffalo Linkstation Pro 1 TB peripheral NAS.  I have attached a USB external drive attached to the Linkstation.  The drive is detected and is shown in the web GUI as well as when I navigate the Linkstation to drive in windows Explorer.  I myself added as a user with the same windows login credentials as well as my login was added to the admin group on the linkstation with reading and writing.

  Here's my problem, I want to move files/folders from the USB drive to the Linkstation (these are not audio/video/photo fields that are not automatically copied with direct copy).  When I try and move a file, I get an error saying "You need authorization of Unix Unix\root to make changes to this file", even if my login credentials have been accepted when I accessed the folder on the linkstation, initially.

  I tried to change the security properties of the folder USB drive such as groups and users available on the system of "special permission" checked.  If I change "Everyone" and check the allow full control, I get another error saying access is denied.

  Finally, I installed the security tool file supplied with the installation CD of Linkstation Pro.  "don't know what this is done, I can either change the security level" or "retrieve the default security level.  At present, the security level of file sharing is "changed".

  I hope someone can help, been faced with this during some time.

  Hello

  
  What operating system do you use to access the Buffalo Linkstation Pro 1 TB peripheral NAS?
  Try the appropriation on the Buffalo Linkstation Pro
  NAS 1 TB device and search for the issue.
  Steps for the reader:
   
  a. click on the drive, click Properties and then click the Security tab.
  b. click Advanced and then click the owner tab.
  c. click on edit and then do one of the following:
  (d) to change the owner to a user or group that is not listed, click other users and groups and enter the object name to select (examples), type the name of the user or group and then click OK.
  e. to change the owner to a user or a group is listed in the change of ownership of the area, click the new owner.
  f. If you want to take ownership of the contents of the disc, select the Replace owner of subcontainers and objects of the box.
  g. click OK and then click Yes when you receive the following message appears: you are not allowed to read the contents of directory folder name. Do you want to replace the the directory permissions with permissions granting you full control?
  h. all permissions will be replaced if you click Yes.
  i. click OK.

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Changing the titles of disk in the library WMP and my folder of music at the same time...?

  Is it possible to sync my music folder (where all my music is stored on my PC) with the WMP library for that when I change that it will automatically update the other.  For example: I tear a disc with WMP;  The disc is saved in my music folder in a subfolder called "Disc One" he also appeared in the WMP library as "A drive" However, if I change the title or follow on one or the other, the change is not made in both places.  It drives me crazy because I do editing even twice.  I don't know if there is something wrong with my setup or if it just can't be done.    Any ideas?  Thank you.

  It should not be a problem with the addition of WMA lossless data... If your rip settings and parameters of the library are correct, any information you enter must apply in all (although you may need to change the name of file separately - always do to the location of the file and not in the library 'explorer').

  I would like to know if the problem persists and we will check things through. -Cheers - Ric

• How to disable the file hiding (changing options for hard disk does not work)

  Hi all

  I hope someone can help me with the following problem:

  -J' need to open a file of 16 GB of content in third party software (Stata) who reads completely in memory.

  -Due to Windows caching file, necessary to get the procedure done about 32 GB cache files and Stata access physical memory.

  -As I have only 24 GB of physical RAM file is read later part of virtual memory, which leads to serious performance problems.

  I unchecked the box 'Enable write on the device cache' to my hard drive. That did not help. Is there a way to disable the Cache during PLAYBACK of files?

  Thank you very much in advance for any help!

  Tobi

  The write cache and virtual memory are different. Virtual memory is an extension of the physical memory residing on the HARD disk where Windows is installed. Normally, the virtual memory is about twice the size of the current physical memory. Write cache is an exclusive setting for external hard drives only and has no effect in internal hard drives.

  In your case, please note that full 24GO of RAM will not be allocated to the program. At least 1 GB will be reserved for windows, so the rest of the programs are moved to virtual memory, which means that the HARD drive. It is not recommended to disable virtual memory because it can cause stability problems. In addition, the files are not copied directly in memory, even if they are big. Instead, the parts of the file are available and this area, including the incremental values and material, are stored in the memory. So if all of a sudden, you access an area of the file which is very far away from the previous location, it takes time as the new area, as well as differentials and material value of a few bytes is also copied to the memory. The box of files previously displayed is erased from the memory.

  For performance improvements, you can go for the SSD, RAM with higher clock speed (must be compatible with the motherboard) as processor as well as the upgrade. However, please note that the process of accessing a file even as mentioned previously, but the speed will increase because of the higher bandwidth and the clock frequency.

• How t change the startup hard disk?

  I upgraded my hard drive to a 500 GB to 2 TB Drive with a hard drive, copy of the program, thinking I could copy my files to the new drive.

  Help. I need to start on my old HDD 500 GB.

  -Donald

  You could add the second hard disk of 500 GB as a slave and copy your files on the hard disk of 2 TB if its startup. If its not bootable, try to load Windows on it and install the 500 GB drive as a slave and copy your files:
  How to add an Extra hard - wikiHow You will probably need to take ownership of files and folders on the drive of 500 GB, before copying them to:
  How to: Make a file/folder in Windows 7