Change USB problem a disk attached to Buffalo Linkstation Pro.

Similar Questions

• Cannot display the Buffalo LinkStation Quad Network Attached Storage on network.

  Original title: Buffalo LinkStation Quad Network Attached Storage - LS-QL/R5

  I have problems to view this device from a Windows 7 computer.  All the other computers in my house running trouble Windows 7 and Vista are able to see the device.

  When I open the network sharing Center, it simply does not appear.  I am, however, able to navigate on the device using a browser or access music on the device using DLNA.

  Y at - it an option of security somewhere that I missed?

  Hello

  
  1. the device has not detected in Device Manager?
  2. don't you make changes on the computer before the show?
  3. you receive an error message on the computer?
  Method 1:
  Run the fix it and check.
  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/GP/hardware_device_problems

  Method 2:
  Perform a clean boot and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: After the shooting set the computer to start as usual by performing step 7 above of the Knowledge Base article.

  Method 3:
  You can download the driver from the manufacturer's Web site and check.

  http://www.buffalotech.com/support-and-downloads

  Check out the link:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 4:
  You can temporarily disable the antivirus and firewall on the computer and check if the device is not detected.

  Enable or disable Windows Firewall
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  NOTE: Turning off Windows Firewall may make your computer (and your network, if you have one) more vulnerable to damage caused by worms or hackers.

  You can see the following link to disable the Antivirus installed on your computer software.

  Disable the anti-virus software
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  NOTE: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  You can contact the Buffalotech support for assistance:
  http://www.buffalotech.com/contact
  Hope this information is useful.

• Satellite M60 164 - USB problem

  I have recently introduced a new Toshiba laptop and am runing Windows XP with SP2. I'm having a problem with some USB devices powered like a USB stick or disk external hard usb. The USB key that I use is fed by another usb port, I tried one on Tosh and the other on a desktop computer. All thouhts appreceiated.
  The M60 usb ports are powered? I'm missing something.

  W

  Hello

  This problem can occur if you plug a USB device high power as a hard drive USB, the USB device consumes more than 500 my power.
  To work around this problem, you must supply the external power USB device if it is available for the device. For example, you can use an AC adapter to power the USB device.

  http://support.Microsoft.com/?ID=870893

  Please also see this page:
  http://support.Microsoft.com/?kbid=810400

  Concerning

• USB problem-"USB device not recognized".

  Original title: USB problem

  I have a problem when I connect my nokia mobile to my pc via USB cable there is a display of msg of error "USB device not recognized.how to solve this problem? I tried all reboot pc, reconnect the device, format XP and reinstall.last night I was using a mobile navigation correctly with the same device same system same cable.i have tried driver re install but not fixed yet.i have Windows XP 3 intel p4.please help.

  Hello

  1. Are you having the same problem if you connect a drive flash or any other device?
  2. Have you tried plugging in Nokia mobile on another computer?
  3. Have you tried plugging it into different USB ports?

  I suggest you send more information to help you better.

  You can also refer to:

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive.

  http://support.Microsoft.com/kb/925196

  USB port may stop working after you remove or insert a USB device.

  http://support.Microsoft.com/kb/817900

  .

• the hard drive of my computer is purchased full.i a drive.how external hard change outside the primary disk so I can download music easily?

  the hard drive of my computer is purchased full.i a drive.how external hard change outside the primary disk so I can download music easily.right now my external backup just my computer that isn't doing me good

  original title: external hard drives

  You don't want to change your external drive to your main drive.

  You can move your music files on the external drive - or you can move other data on the disk to make room for your music on the internal drive.

  What applications do you use to play music?

  As described in the first link below, you can move your full "My Documents" folder on the external drive.  Alternatively, you can simply move your music files.  If such an arrangement would give you a satisfactory performance, however, depends on how your external drive is connected (for example, USB 1.1, USB 2.0, USB 3.0, eSATA, Firewire, network) and other hardware features of your computer.

  Not all of the following conditions will be applied to you, but some of the tips can be useful.

  There are a number of things you can do to- temporarily - free up disk space.  The only real solution, however, is to get a bigger internal hard drive.   You can move the data to your external drive, but if it's the data that you use frequently, slower access times may annoy you.  Therefore, I do not recommend that you move your My Documents folder in its entirety on the external drive, but you can certainly do this by following the related instructions.

  • You can run Disk Cleanup (start > run > cleanmgr > OK)
  • You can reduce the size allocated for the restoration of the system to about 1 GB (right click on desktop > properties > system restore > settings)
  • You can disable hibernation (if you don't use it) (right click on an empty spot on the desktop > properties > screen saver > power > Hibernate)
  • You can disable the indexing of the drive, which will also speed up your computer a bit (http://lifehacker.com/031440/turn-off-indexing-and-speed-up-windows-xp)
  • You can reduce the size of your Internet browser cache (depending on the browser that you use)
  • You can remove most of the $NTUninstallKBxxxxxx files $ following the directions here: http://windowsxp.mvps.org/Hotfix_backup.htm (read the warnings in the gray box first)
  • See also:

  " How to recover disk space on Windows Server 2008 and Windows XP computers? ."

  " Forty ways to free disk space ."

  But none of these answers you will earn really large amounts of space for very long.  The term solution time is a bigger hard drive.

  In the meantime, download and run JDiskReport, that will show you graphically what files take up more space and seem to so indicate what files you must move it to your external drive.  If you want to move an application, you will need to uninstall and then reinstall it specifying your external drive as the installation location.  You can not simply move the files.

• Disk space free (compress old files) does not change after you run Disk Cleanup.

  Original title: win. XP disk cleanup

  Win. XP: Free Disk Space (compress old files) does not change after you run Disk Cleanup.  Confused.

  Thank you. VC

  Compress your files, your computer will slow down a lot. I recommend that you don't try this.

• I'm trying to restore my win7 with HP USB recovery Flash Disk, I get the following two messages

  I'm trying to restore my win7 with HP USB recovery Flash Disk, I get the following two messages:

  "Do not create C:\Users\User\AppData\Local\Temp; c:\arc\01Script\FormatUFD.SP' and the messsage "Fail to create.

  How to port HP_recovery in car to my flash drive?

  Windows 7 x 64, HP G62-144DX

  Hello:

  I can't help you with this specific issue, but if you can get it is resolved and you can read the product key 25 character Microsoft Windows on the bottom of your PC, do your own installation of W7 media to reinstall W7.

  Here's how:

  If you can read the Microsoft windows 7 25-character product key, you can download simple Windows 7 ISO files to burn on a DVD for the version of windows that is installed on your PC, and which is listed on the Microsoft COA sticker on your PC case.

  Burn the ISO with the option to burn the ISO on your DVD burning program and burn it at the slowest possible speed that will allow your program. This will create a bootable DVD.

  Or use the installation of Windows 7 USB/DVD tool to compile the ISO file that you download from Digital River. Link and instructions below. You need a 4 GB flash drive to use the USB compilation method.

  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool

  Use 25 characters on the PC product key to activate the installation.

  The key will activate a 32 or 64 bit installation.

  Then go to the support of the PC and driver page to install the drivers you need.

  Link to downloads ISO of W7 is below.

  http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

  Paul

• Format the USB as VMFS disk

  Hi all

  Is it possible to format the USB as VMFS disk to use for the data store?

  Thank you very much.

  Short answer = No.... It is not supported.

  However, I found this: LINK

  Someone seems to have 'some' success with something that was / is on the HCL:

  Quote:

  We have on external USB formatted with vmfs functioning as a store of data on

  a Dell server that has the advantage of being on the VMWare HCL, format

  the drive that the partion type fb and execute commands to get the kernel to create

  / VMFS/Devices/Disks vmhba for the reader, then put vmfs shaped, he worked on

  the ESX 3i server Dell, but not on incompatible hcl ESX 3.5 server,.

  Thanks for the support

  If you "innovate" with I guess.

  Post edited by: O_o

• How to resolve the IP address automatically changing the problem?

  My Oracle database 10g (10.2.0) is on the Windows XP platform and the IP address of the system often changes automatically. This leads to problems with my Oracle database. How to deal with this problem? How to stop the IP change the problem?

  change your windows networking to dhcp to a static ip address. Just google it or follow [this link | http://www.hotcomm.com/FAQ/FAQ_staticIPXP.asp]

• Buffalo Linkstation does not connect to SLM2024

  I recently installed a Gigabit SLM2024 switch. We have a mix of devices on the switch, servers, computers, printers, wireless access points, and all work ok. We have also four Linkstations Buffalo with Gigabit Ethernet. Each linkstation has a DHCP reservation, but when it is connected to the SLM2024 ip address is not issued and the linkstation is not accessible because the default ip address is used by the devices. When the linkstations are connected to a Netgear switch they work as expected. The SLM2024 was purchased to replace the Netgear because it has only 2 gigabit ports.

  I did not any changes to the configuration of SLM2024. Any ideas?

  Hi Richard,

  All four Buffalo Linkstations show the same symptoms when it is connected to my SLM2024 or a device has a problem with connectivity.

  The second screenshot that you pasted shows ZERO ethernet frames are seen from the Buffalo Linkstation.  This is not good.

  If all the four Buffalo Linkstations do not work when it is connected to the SLM2024, I think there is probably a problem with the way that we auto-negotiation ethernet connection between the switch and the NAS server.

  Most likely you checked Buffalo to a software update for the linkstation, I noticed that Buffalo has new software on a little more than a month for the linkstation.  If you do not have the new software on the Buffalo Linkstation, is now the perfect time to update the code.

  It would be useful to take the Buffalo Linkstation my switch and plugged into another device perhaps as the old switch from netgear.

  It is possible that we, according to what I saw in your screenshot 1 above, turn off auto-negotiation ethernet port or uncheck auto-negotiation on my switch and difficulty or adjust the speed of the port to 1000 Full Duplex on both my switch port and the Buffalo Linkstation and see if connectivity works then.  Make sure you save any changes to my switch.

  Thus, measures we can try;

  1. look for the software updates of Linkstation and apply them,

  2. If that isn't counters port received to increment, remove the auto-negotiation ethernet on both my switch and the Buffalo Linkstation and see if the packages flowing.

  [ Note: I've highlighted the word at a time to indicate that auto-negotiation of ethernet ports is cut at one end of an ethernet link should be disabled at the other end of the link ethernet so]

  Best regards, Dave

• Solution found to the problem of "BAD RTC BATTERY' on Satellite Pro 6100

  Hi, I'm from the Italy.

  I myself have solved this problem without changing the motherboard on my laptop second hand satellite pro 6100.

  for info: [email protected]

  Hello

  may I ask how you solved this? I have the same machine and this error pops up sometimes.

  Welcome them

• Windows Server 2008 R2 after trying to make a backup of Buffalo Linkstation no start

  A colleague logged the buffalo linkstation to our server and tried to save her. Something has gone wrong (the backup was not completed) and the server restarted. Now it starts (the scroll bar ends and after it I see the mouse cursor in the black screen) and after a few reboots seconds. I can't disable the auto restart after system failure in the bios (there is no such function). And this isn't a hardware problem (I connected the HDD on another machine and the result was the same).

  I tried fixboot, fixmbr, rebuildbcd comands in command prompt and they have all successfully completed, but the error still exists. Maybe someone has had this or a similar problem and knows the solution?   Thanks in advance!

  Hello

  Microsoft has specific Forums to help you with your Server 2008 R2 questions.

  Could you please repost this link in Server 2008 R2 Forums.

  "Support for Windows Server 2008 R2"

  http://TechNet.Microsoft.com/en-us/WindowsServer/bb512923

  See you soon.

• Seagate 2 TB usb hard drive are most recognized in xp pro

  Seagate 2 TB usb 2.0 has been recognized by xp pro, but now is not.
  Suspect that it was one of the MS updates
  Drive is recognized on W7 and is accessible. However, it's a laptop and
  not where I want to use.
  Any suggestions?
  Thank you
  Roy

  Hello

  Thanks for posting in this forum. I understand that a Seagate 2 TB USB has been detected.

  Try the methods and check out them.

  Method 1:

  Check out the link and then run the troubleshooter of material and check.

  How to solve problems of hardware and software drivers Windows XP

  http://support.Microsoft.com/kb/322205

  Method 2:

  You can install the latest drivers for the drivers and check, check out the link and follow the steps.

  How to download updates that include drivers and hotfixes from the Windows Update Catalog

  http://support.Microsoft.com/kb/323166

  You can also visit this link and follow the steps.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

• Win 7 is unable to map drive Buffalo Linkstation network

  Hi, for some reason or another my Win 7 can't map drive from Buffalo Linkstation network. He sees with FTP and it is found as a media server, but I can't just map it. My XP pc 'sees' without any problem and also my PS 3 'sees' but with Win7... no dice!

  I already turned off all restrictions on the part of Win 7, I did regedit to LmCompatibility key, I checked that the system time is same in both devices. Still no go with mapping

  Hi AnttiHar,

  It is better suited for the IT Pro TechNet public. Please post your question in theTechNet Support Forum. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en/w7itpronetworking/threads

  I hope it helps. If you have problems in the future, please let us know. We will be happy to help you.

• problem with WiFi connectivity with new Ipad Pro.  Unable to connect to the wifi at home.  My other devices (mini mac, iphone, iPad 2) all work fine on my wifi at home.  I am able to connect Ipad Pro wifi work.

  Problem with WiFi connectivity with new Ipad Pro.  Unable to connect to the wifi at home.  My other devices (mini mac, iphone, iPad 2) all work fine on my wifi at home.  I am able to connect Ipad Pro wifi work.

  On the Pro iPad, tap settings > general > reset > reset network settings

  You will need to re enter your Wi - Fi password.

  Then try to connect to your Wi - Fi network.

  If this does not help, more available in this support article suggestions > If your iPhone, iPad or iPod touch connects to a Wi-Fi network