change, step set name definitely Labview Testand API

Similar Questions

• When I change the setting by LabVIEW on my device, I see change on the monitor of the device?

  When I change the setting by LabVIEW on my device, I see change on the monitor of the device?

  This question should be addressed to the manufacturer of the device. From your previous posts, I guess you use GPIB or serial. If the unit has received the order, the manufacturer should be able to tell if no indicators on the device to update when the order is received. Based on my experience, however, the device indicators will most likely update on receipt of an order successfully.

• Someone knows how to change just a 'Set' name (location)?

  I thought that to globally change a 'Set' or a location name would be a simple task of the use of the facility to "Manage the list"... but no, I don't see how to do it!
  Help would be very appreciated.

  Thank you. Peter

  Once added, a game name cannot be changed subsequently.

  You can add a new entry in the list with the correct name and then delete the old if necessary.

• How can I create a pause in my inspection so that I can change a setting on my DEGREE, and then resume with the rest of the inspection?

  New to Labview and NI Vision in general here.

  How can I create a pause in my inspection so that I can change a setting on my DEGREE, and then resume testing?

  I want my inspection to execute algorithms on the acquisitions of two different images, where the break to change the settings of my DUT.  I thought that the breakpoint was working well when I'm in the configuration interface and I run the State, but it seems that when I run the inspection he jumps on the breakpoint and continues on the next stage of the inspection immediately.

  Are you running Vision Builder AI on Windows or on a remote target? If you have a remote target, which?

  On Windows, you can use a step of user input in the last tab of the Vision Builder AI tool palette.

  It will display a dialog box that is paused the inspection until you click on a button.

• How to change the SSID name of the computer to be Compatible with the new name SSID router

  Need to change the default name of the SSID router and then reconfigure adapters wireless in each PC to be compatible with the new router SSID.  A PC has Windows XP Home Edition Version 2002 Service Pack 3 and the other Vista Home Premium.  What are the steps to change the SSID on each PC?  Your response will help complete a home network wireless system.  Thanks in advance.

  Hello

  Your computers use the SSID of your router - sound essentially its name.

  Check this box:
   
  Setting up a wireless router with Vista
  http://www.ehow.com/how-does_4899098_setting-up-wireless-router-Vista.html

  If necessary:

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  Setting up a wireless router with Vista
  http://www.ehow.com/how-does_4899098_setting-up-wireless-router-Vista.html

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Recordsets disappear menu when adding mysql_query (& quot; SET NAMES 'utf8' & quot ;); below the connection in php

  I hope someone can help with this. I am trying to create a dynamic site using dreamweaver CS3, with php5 and mysql5 in the background, but I have trouble with endangered recordsets in the server behavior menu when changed the code to allow game characters or define names for utf8.
  
  For awhile, I had a problem getting my main list dynamically generated pages (for example, lists jobs) to display international characters like an e accented french (and other languages) and that they display correctly when seen in phpmyadmin also. So, I placed headers at the top of the page for utf8 and created the metatag content to utf8 in the page code. Where which I added ENT_QUOTES utf etc. to htmlentities and added accept-charset utf-8 in the < form > action RADIUS.
  
  (one thing I did not in the range of form, is to add < enctype = "multipart/form-data" >, but I don't know if it will make a difference)
  
  In the backend, the innoDB database is collected and built using utf8_unicode_ci. I am on a shared host - so cannot directly access php.ini or adjust the settings to connect via phpmyadmin. But I can't write the files .htaccess (currently with the defaultcharset also the value utf8).
  
  At this point - all the pages of the list appear correct when characters extracted base - which indicates that the headers are working. But - in phpmyadmin, the letters are truncated and jumbled return on forms of update (content management). I solved this problem by adding the & #xxxx; equivalent to insert and forms of update to display the text correctly on list pages-, but again, it is not practical to see all this in phpmyadmin, how I'd love to be able to read it such that she should be freed of the need to add & #xxxx references on the forms of the insert and update.
  
  Then... a bit of research, and I read that in order for international characters is displayed correctly in phpmyadmin, I had to modify my page php code so that all instances where I see the connection to the database, before queries SELECT, INSERT and DELETE, I have to add is mysql_set_charset ('utf8', $connection) or use the three lines of code that references mysql_query SET NAMES The VALUE OF THE GAME CHARACTERS and COLLATION_CONNECTION SET to utf8.
  
  I did, and he removed all my recordsets in the side menu! Not too good. I find myself with a task of rebuilding the pages now.
  
  So I put the mysql_set_charset line in the connection.php file in the folder connections DW below the connection it there instead. [I was not precede the mysql etc line by a sign $-I wonder if this is the problem?]
  
  With this change I could use the forms of Insert to add international characters directly into the database by phpmyadmin that everything was hunky dory. But then the problems arrived with the main list page first loads.
  
  So, I can now obtain international characters in the database (which is a step in the right direction for me), using a form on the site, but I still could not get international characters to display on the page returned when first loading for example on a list of jobs. Note that the detail pages display correctly when you click on the links of masters, and when I come back the details of the page back to the main list - the characters are ok. They do not seem to display when master page loading for the first time which is really perplexed me.
  
  I think I need to add the line below the $connection mysql_set_charset and before him selects, inserts etc. to all instances on the Web page, but this removes just the recordset in the menu, so appears not to be a good option.
  
  Can someone point me in the right direction as I was stuck on this for centuries. It can be something as simple as the addition of $ before the mysql_query, but there again perhaps not.
  
  I tried other forums - but people seem to be content of visualizes but not offering does not help. I do not think that what I'm doing here was did not before... all I want is for my pages to display international characters and that they display correctly in phpmyadmin so that when I insert, update, and delete records using Web Forms I don't have to resort to the use of & #xxx inserts.
  
  Help please!

  He solved. The question is to do with the preview of a file TMP page /, rather than a web page accessible through links on the navigation bar.

  In short clear them memory cache and preview for example a page to work with international characters in it on the first charge will present scrambled characters. This is because the page is a TMP file. Simply renames in the address bar to its file name appropriate will present the characters as it should.

  This can be double checked by loading to the top of the home page and access this page through the navigation bar - once again the characters appear very well, even on first use.

  So if you have the same problem, I got now you know... it's a simple solution, but unless you know, he'll save some hair pulling moments.

• How I bounce back without having to change the setting of 'Protection against overload only' amateur off EACH time?

  How I bounce back without having to change the setting of 'Protection against overload only' amateur off EACH time?

  This setting should be preserved, once you set it... so I'm not sure why you have to define every time...

  Then... Make sure that you put on ALL the tools of the art of logic in the preferences of LPX...

  Otherwise... you may need to reset the prefs of LPX... Put all the Tools Advanced again and the other preferences you have set... and see if that fixes things for you...

  You can resolve many issues by restoring Logic Pro X back to its original settings. This will not affect your media files. To reset your settings preferences of the user to Logic Pro X to their original state, do the following:

  1. Logic Pro X to quit smoking
  2. In the Finder, select go to folder menu reach.
  3. Type ~/Library/Preferences in the field 'go to folder '.
  4. Press the Go button.
  5. Delete the com.apple.logic10.plist file from the Preferences folder. Note that if you set custom shortcuts, it will reset to the default values. You can export your custom key as a preset before performing this step. See the Logic Pro X user manual for details on how to do this.
  6. If you are having problems with a control surface in Logic Pro X, you can also delete the com.apple.logic.pro.cs file in the Preferences folder.
  7. Restart the computer.

  Note: If you cannot find the files listed above, you don't follow the instructions properly!

• Authorization of 'change step list Configurations! -Still a bug?

  I did research on a problem we have regarding our developers are able to edit list step configurations.

  My problem is the same that this bug is entered in 2007.

  Authorization of 'change step list Configurations!

  http://forums.NI.com/NI/board/message?board.ID=330&message.ID=15230

  This bug was already registered or addressed?

  We use an external database to store the names of users and their group. If Privileges.Configure.GrantAll is not assigned by the developer group, described in the linked post buttons are grayed out.

  We prefer developers do not have the ability to edit the users, but they must be able to customize the appearance of the development environment.

  The bug was recorded (inside CAR #52133), but it has not yet been addressed.

• Change the setting for the acquisition of IMAQ1394 speed by program

  Hello

  I use a pilot LabWindows/CVI and legacy NOR-IMAQ IEEE1394.

  I want to put the acquisition of speed setting in my program.

  MAX can do (there is a drop down menu to change the speed of 100 MB / 200 MB / 400 MB.)

  How can I apply this in my program? The problem is that I can't find the attribute to modify.

  For example, for the brightness, the attribute IMG1394_ATTR_BRIGHTNESS is?

  But for speed?

  If I take a look at niimaq1394.h I see a data type of enumeration, but nothing else on the speed.

  Any help would be appreciated! Thank you.

  Kind regards

  Robin

  Hello

  Following procedure could meet your requirement.

  (1) close to the camera.

  (2) open the file "camX.iid" and find the name of "CameraFile.

  "cam0.iid" of my IMAQdx on VISTA is

  c:\users\public\Documents\National Instruments\NI-IMAQdx\Data\

  (3) open the file of the camera and change the setting you want to modify and save them.

  (4) open the camera.

  These files are simple text files.

• How can I change this setting to display on a TV and laptop?

  original title: when I connect my laptop to the tv, I opted for the display on the tv only tobe.  Now, I want to display my computer and the TV. How do I change this setting?

  I used the vga connection to connect the entire computer and television.  The software asked where I wanted to display

  On the computer and TV

  or

  just on the tv

  I chose only on tv.  I don't like this setting, and I want to restore the computer and television.  How can I do this?

  Hi Lorne-MaureenCodner,

  Follow the steps below to view a video on the computer and the TV at the same time:
  1. Right-click on an empty space on your desktop
  2. Select Customize
  3. Select display
  4. Select change display settings
  5. Select duplicate these views of several drop-down screens
  6. Click on apply and OK

  Let is know if this helps.

• LaserJet M1536dnf: Impossible to change the host name on HP LJ M1536dnf

  Hi everyone;

  I'm changing the host name on our printer that is currently Imprimante1 that's not what I'm looking for (I have no idea how it was change or not at all).

  I tried to access the printer via IP in a browser (tried Chrome, IE and Edge) still occur. I see the host name to the title of the network, however, I am not able to change it.

  I also thought I might be able to install the software and use the Toolbox, except that during the installation, the Toolbox links are created in the start menu, but it is never installed (confirmed uninstall reinstall twice)

  So yes, here it is...

  Anyone have any ideas on the issue?

  See you soon,.

  Do not know your printer exactly, but on most of these when you go to the web page, you must go to networking and you will need to go in which change you the method of how it gets ip address or an ip.  On this screen will be the ability to set the IP in a manual address and the area that contains the host name you should be able to click on it and change the name.

• How can I change my display name on Windows mail?

  How can I change my display name on Windows mail?  I think it is XP, but it has been set up by someone else, so I'm not 100% sure.

  XP uses Outlook Express. Vista uses Windows may. However, the way to change it is the same. Tools | Accounts | Mail | Properties | In general. Under user information, change what's in the name field.

• How can I change the default name of my computer?

  When I bought my computer, my daughter set up for me as a surprise for me when I arrived home from work, my computer would be in place and running and it was... However, she named my system with my name and my ex-boyfriend!  I can't understand how to change it!  I don't want to connect and see his name given so that mine to 'MY' computer!  Please help me change that... I was pulling my hair out trying to figure it out for about a year now!  Lady in distress... lol!  Thanks in advance!

  This should really be posted in
  http://social.answers.Microsoft.com/forums/en-us/vistaappearance/threads or
  http://social.answers.Microsoft.com/forums/en-us/VistaInstall/threads

  See "change the name of your computer.  http://Windows.Microsoft.com/en-us/Windows-Vista/change-your-computer-name Brian Tillman [MVP-Outlook]

• I have a problem with the connection to the computer after you change the user name.

  Original title: HELP

  I changed the username on my laptop and it is not letting me log

  I changed the username on my laptop and it is not letting me log

  Here you go:

  1. Set your BIOS so that it uses the DVD drive as its primary boot device.
  2. Start the computer with your Windows 7 repair CD.
  3. Press a key when prompted to boot from the DVD.
  4. Select 'PC Repair' in the menu.
  5. Select 'Repair' when prompted.
  6. When you are prompted, select System Restore.
  7. Configure Windows to a point before you have changed the user name.
  8. Plan ahead a little and create, test and document an alternative admin account, same as you have a spare emergency House key. This will save you a lot of trouble.

• How to change the user name in windows 7 Professional?

  I recently installed windows 7 Professional and by chance I typed my user name and the computer when it prompted me to type it in. When I had typed the wrong characters in and click on 'Next', he wouldn't let me go back and change it, so I was stuck with an unwanted user/computer name. I managed to change the name of the computer for the word you want, but I didn't always know how to change my username.

  I went to user accounts, and there was an option to change the name of the account, so I did.
  However, none of my directories has changed its name, and all processes in the Task Manager were still running under the same previous user name, which I did not want it to be.

  Is there a way to change the username of an account so it affects all the directories, files, folders, etc. without creating a new account with that name? Or, if possible, copy all the files and preferences of the current account to another account with this name?

  Any help is appreciated.

  You cannot change a user account by changing just the name. Simply by changing the name will do a cosmetic change only and does not affect the underlying files/folders in the profile.

  1. from an account with administrator privileges, go to control panel > user accounts and to create the new user account named Standard the way you want to and at least one additional administrator account. Call the last 'CompAdmin' or 'Tech' or similar.
  2 log in to the new Standard user account once if the profile of the files/folders are created and then connect to CompAdmin.
  3. now go to control panel > system > advanced > user profile > settings
  4. you will see where you can copy user accounts. Copy the old account to the new from there. Use her browse to select your new account (C:\Users\newaccount).
  5 log in to the new account correctly named and make sure all your stuff is here and it works as you want. When you are satisfied, you can log on and CompAdmin and remove the old account from the control panel > user accounts.

  If you want to access your account again, it is corrected automatically, follow these steps:

  Start Orb > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).

  General recommendations for the establishment of user accounts

  You absolutely don't want to have only one user account. Like XP, Vista and all the other modern operating systems, Windows 7 is an OS multi-user with integrated system of accounts such as administrator, by default, all users invited. These accounts should be left alone because they are part of the structure of the operating system.

  In particular, you do not want account only one user with administrative privileges on Windows 7 because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult. It is not impossible to activate the built-in administrator to rescue things, but it will take third-party tools and work outside the operating system.

  The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.

  If you want to go directly to the desktop and ignore the Welcome screen with the icons of the user accounts, you can do this by following the instructions written in the first part of this post.
  MS - MVP - Elephant Boy computers - don't panic!