Mode of cooling MFP M176n Printing problem

Similar Questions

• HP color laserjet pro MFP M176: mode of cooling MFP M176n Printing problem

  I have just boughjt a HP Color jet pro M176n MFP laser now is always see the "cooling printing mode", after a few pages print. It's too long to be completed print jobs. Appreciated if you could help solve the problem of urgency. I tried all the solution suggested above, I am desperate, please send me a private message as you have done for others, I need a viable solution, or I might have to return the printer

  Hi @xpresscomputer,

  I understand that you get an error 'Cool-down '. I'd love to help you.

  I didn't know what steps you have tried so far, so that I provided all the steps to see if it will help to solve the problem and I can send you this information in a private message. In the forum next to your handle name simply click on the envelope to see.

  I have provided a document with Messages from Control Panel solve.

  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  Update the firmware of the printer. Software and Driver Downloads.

  If the problem persists, please call our technical support at the 800-474-6836 for assistance. If you do not live in the United States / Canada region, please click the link below to get help from your region number.
  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Good day!
  Thank you.

• LaserJet Pro 100 color MFP M175nw printing problem with Erorr with "Print queue was not accepted.

  MFP M175nw would not print no matter what MAC or HP labtop... it will show the test without problem page.

  Erorr log shows this:

  W [27/Mar / 2013:19:26:41-0400] HP_LaserJet_100_colorMFP_M175nw__0621F0_: printer takes in charge Create Job but not use of Send-Document.
  E [08/Apr / 2013:21:10:25-0400] [post 112] Print queue has not been accepted.
  E [08/Apr / 2013:21:10:48-0400] [post 112] Print queue has not been accepted.
  E [08/Apr / 2013:21:11:11-0400] [post 112] Print queue has not been accepted.
  E [08/Apr / 2013:21:11:34-0400] [post 112] Print queue has not been accepted.

  Any expert know about this?

  I need to know more information about what is happening here to start. It seems that you are experiencing printing problems, but I can't get a lot of information that you presented. All the information show me is that the file could not be accepted by the print job. I'm going to need to know what it is that you print file type and size, the program you are printing the form, if you are still able to print other documents from other programs, how long it lasts and any other relevant information.

  Departure, we will perform the two resets in this video:

  http://www.YouTube.com/watch?v=31TbWMrTaFk

  Then, if you use a USB cable, make sure to remove (this is important). Do not plug it in again until the software instructs you. Through devices and printers, programs and features and issues Device Manager and make sure that all copies, files, and programs related to the printer are removed. As indicated, and then restart the computer.

• HP LaserJet M4345 MFP: Network printer problem: cannot print, but can ping

  Good evening

  I have a big problem. We have a network HP LaserJet M4345 MFP printer. It is connected to a switch and the switch is connected to a Modem of Telmex.  It has a static IP address. 5 computers to connect to this printer, but I'm going to use one as a sample.

  The problem is that I can't print anything.

  • I can install the printer in all computers
  • I ping the printer
  • I can access the printer configuration using a browser
  • I can even scan a document

  But I can still print the test page. We have a static IP and it does not repeat the IP address, the host name is unique and date everything is fine. I tried to ping to test for the default gateway and it a ping with a correct response time.  So:

  • The configuration of the printer can be accesed via browser
  • The computer can ping the printer
  • I can scan a document to the PC
  • The printer installs very quickly in all machines
  • The printer can ping the default gateway
  • The IP address and the host name are unique

  What could be the problem? I tried to print in all the machines without success.

  Thank you for your attention.

  It is possible that the network adapter has a problem but since it's your only work around would be to buy a direct jet EIO card and put in the EIO slot in the back near where the network cable is plugged.  They are fairly cheap on ebay and you want to buy a 610N, 615N or 620N one of these models will work.  You must assign an ip address that is different from the one assigned to the integrated card.  I think that there is a way to disable the built in network card, but I have to carry out additional research on that.  If you have an old hp printer that you do not use with a network card eio, even if older 600N it will work in this printer.

• Printing problems in Mono from an iMac from Apple on a HP LaserJet Pro 200 color MFP M276nw

  Problems printing mode Mono of Apple iMac.

  Affecting the still B & W prints ONLY in color, despite selecing B & W in the framework on iMac in print.

  Have also tried to change parameter in the HP online portal - doesn'e seem to be a facility to select or clear the print in both modes.

  'Copy', black - print in B & W (so I know the printer is able to DO!)

  Does anyone have a solution for this please?

  Thank you very much - this fixed it finally.

  Confusion was - Presets show black and white, project

  I have seen that 'Safari' has a menu drop-down and many more options to select.

  In doing so, and by selecting color / quality - helped me to solve this problem.

  Thank you very much indeed!

  Yvonne

• HP7500: printing problems

  Windows 7

  HP7500

  Wireless printing

  Can print PC test page, but not Word document print.  I have this intermittent problem and sometimes after printing test page for the PC, the document will be printed.  Sometimes I have to run print and Scan doctor. This time has solved the problem.  Printing and scanning doctor said nothing wrong and print a test ok page. Still no Word document printing.

  Hello @Eric4and welcome to the Forums of HP, I hope you enjoy your experience!

  I see that you are experiencing printing problems. I would like to help!

  I would like to start by running the following two uninstall process:

  The problems that the programs cannot be installed or uninstalled

  Uninstalling the printer software

  Once it is uninstalled, I suggest you put your system in clean boot mode in the configuration of Microsoft.  You can do this by following this document: How to perform a clean boot in Windows.

  Once the computer is in clean boot mode, I would suggest to reinstall the HP printer install wizard for Windows.

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• LaserJet MFP M177fw Pro: Problem of scanning color multifunction M177fw

  Hello

  I'm using a MFP HP LaserJet Pro M177fw in my office for awhile. I have no problem with printing and faxing. But I can't do color scans good I can do scans in grayscale at 200 DPI. I get the following error when I try to make a color scan.

  

  I use Windows 10.

  Any suggestions?

  Best regards

  YK

  @Silahtaraga,

  Thanks for the information. I would like you to go ahead and follow the steps below:

  Try disabling your firewall and running the installation to see if it allows you to install, if this does not work try a clean boot and run the HP printer install wizard for Windows , it was created to help Windows 7, Windows 8, Windows 8.1 and 10 users to download and install the latest and most appropriate HP software solution for their HP printer.

  Additionally, make sure that the Firmware is up to date, see here: get printer updates

  If you still run into installation errors, continue here: after Windows 10 Upgrade, printer problems

  Let me know the results. If this resolves the problem please let others know to mark this message as "accept as Solution".  To simply say thank you, click the "Thumbs up" below!   If you need more assistance let me know and I will gladly do everything I can to help.

• HP 3050 j610: wireless printing problem withhp3050j610a all-in-one.

  I have been scanning and printing documents regularly. one day during the analysis of a doc a message flashed on the computer screen that there was a communication problem between the computer and all in a printer.it persists over and over again.

  He had no problem with impression then.

  as advised by the media, I downloaded a link . http://169.254.152.74 and saved as a favorite and he used every time I had to analyze.

  yesterday it stopped opening.

  Contact support who advised me to support responsible link.down to print and scan doctor and solved the problem of scanning and it turned into a printing problem. print a test page, it does not print a document.

  After encountering conflict driver down load of troubleshooting, I was informed to uninstall the drivers and the use of the CD that came with the product.i did. without success. scanning is ok.

  However, questions have been confirmed to have been solved by the doctor tool but is not printing. not even the test page. There is no abras to low ink.

  I double clicked on the printer icon when and as advised by the tools, without result.

  I use a laptop sony vaio e series with win7 os.

  Please help me solve the problem.

  Hello @casia15 and welcome to the Forums of HP, I hope you enjoy your experience!

  I see that you have problems printing.  I would try to help!

  First of all, I would say uninstalling the software of the printer.

  Once it is uninstalled, I suggest you put your system in clean boot mode in the configuration of Microsoft.  You can do this by following this document: How to perform a clean boot in Windows.

  Once the computer is in clean boot mode, I would suggest to reinstall the HP printer install wizard for Windows.

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• HP LaserJet M127fn MFP pro: printer works is not after a few days

  Hello I have a printer model: HP LaserJet MFP M127fn pro

  I installed the software and drivers and the printer works perfectly well for a few days and then stops working. I have then uninstall and reinstall the drivers working yet and only a few more days...

  Someone please guide what to do...

  Thank you

  Hi!, guy36:

  Please see... http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Introduction

  Step 1

  Step 2

  Step 3

• HP B210a Photosmart and iPad2 printing problem

  Hello.
  I just bought the B210a for my iPad2 wireless printing. I joined the printer properly to my W - LAN network (as far I can tell there is no problems with the WPA or IP) and implemented by following the instructions in the manuals. I had no problem printing from my PC. My iPad also recognizes the printer without problem. But when I try to print from my iPad (on Safari and hp iPrint) the printer does nothing. HP iPrint starts the race printingprocess for a few seconds and then tells me something from (excuse me, I have to translate it from German) as "possible within printing problems. Check the printer for more information". My printer does not show anything.
  -The report says it all test is successful, the quality of the signal is fine, the identifier SSID is correct, MAC, IP address, DHCP, infrastructure, WPA - PSK and automatic encryption (AES)
  -in my router configuration screen, the printer has been Born as a networkdevice with IP address
  -MAC filtering is turned off
  -W - LAN mode is 802. 11 b/g to channel 13
  -WPS is disabled because it caused problems connecting the iPad to W - LAN
  -My iPad is also in the W - LAN, network and can access the internet through a router
  -I can't acess the printserver B210a via the IP address of my PC's built-in
  -all devices are in the same subnet 192.168.1.xxx
  -J' have already disabled the power of my iPad, printer and router and got no result

  I hope you can help me. Thank you.

  I just found the solution: I just had to restart the IPad2 (hold both keys). Now, it works fine.

• Where can I find better, more correct instructions to solve printing problems by editing prefs.js?

  Instructions of "resolve printing problems | Firefox Help, line 6. Delete all the lines in prefs.js that begin with print_ and save the file. "do not match what is actually in my prefs.js file.

  In other words, he didn't y not the lines * beginning * with "print" or "print_". However, the string of five characters 'print' is * very * many times buried deep in a line of characters, but never at the beginning of a line and rarely followed by underscore. So I have no idea what I'm actually planned to do to solve my problem.

  It seems to me that this is just a badly phrased statement that might be more appropriate for someone who is familiar with the codification and development of software, which I'm not. I don't have the time, experience or knowledge to understand. I need more literal/explicit/specific instructions.

  The printing problem I have is that I have to print via WiFi to a printer in another room wired to another computer, and Firefox seems to switch or possibly reverse scales fonts for information of margin and the text of the Web page. In other words, the title of the document, date, time, prints etc very wide and the content of the page text prints almost too small to read.

  If there is a lot of user set prefs involved that need to be reset, then it's much easier to delete related lines of the prefs.js is each of them with the button straight on the topic: config page and click Reset.
  This is the main reason (single) to edit the prefs.js file.

• Print problems with the recent update to Version 10.11.5

  Print problems with the recent update to the Version of El Capitan 10.11.5.  Cannot print to my Epson and Samsung printers after update to new IOS.  Print jobs get hooked on my Mac Pro.

  Roger 510 wrote:

  Print problems with the recent update to the Version of El Capitan 10.11.5.  Cannot print to my Epson and Samsung printers after update to new IOS.  Print jobs get hooked on my Mac Pro.

  Have you checked with Epson for an updated printer driver?

• From updateing to 8.1 WIndows printer problems

  Until I updated to Windows 8.1 other months everything was going well on my new laptop, then I went to something of my HP Photosmart B109n scan and it did not work because the pilot was now missing and the application that replace the HP printer driver HP is useless.

  On the advice of the HP site, I tried to download the new driver, but it wouldn't go, he said I had to remove the exsisting installation but when I try it just reboots the computer, but is still there afterwards. It turns out the uninstall has disappeared from the current and installation does not appear in the installer I downloaded.

  As a last resort, I used the system restore but has not only the printer has not changed but now some pre-loaded apps will not work and ask to renew the license of developers.

  I'm a lost what to do next - please help!

  Your laptop is not known to me, but in the case of update 8.1 Win, you should check this update from Toshiba to win 8.1 page: http://www.toshiba.eu/innovation/gen...ws8_1-message/

  There you can check if the Win 8.1 is supported on your laptop and how to perform the Update step by step for Windows 8.1
  Some drivers must be uninstalled and updated after installation of update 8.1 to win!

  Regarding your printer problem:
  Each manufacturer of the printer contains own drivers for the Windows System.
  We don't know me if HP released Win 8.1 compatible drivers for the printer Photosmart B109n clean, but to be honest, this problem is not related to the Toshiba laptop. If you have problems using HP printer under 8.1 to win, you should visit the support page of the printer manufacturer for troubleshooting tips and workaround solutions.

• Eny HP 4520: Printing problems in word Document with photo

  I just purcahsed a HP Envy and I use the function print via the wireless option. I have a word document that I was able to print in the past which has an image inserted into the document. All in the words fine printing copies only the upper left photo f. When I show preview before printing, it shows that if the whole of the document will print correctly and the image should print very well... I have attached what print preview looks like and what actually prints

  Hi @dmanyeah,

  Thank you for reaching out to the forums! I understand that you encounter printing problems in Word, the full image is not printing. Thanks for providing the screenshots. I'd love to help you.

  Try to print a picture from another application to see if you have the same problem.

  To exclude the driver, install a generic driver to see if you have the same results.

  • On the computer, go to start, devices and printers, right-click on your printer and select printer properties.
  • Click the Advanced tab and click new driver, and then click Next.
  • HP Deskjet 9800 by selecting in the list or the Deskjet 990c printer, click Next, Finish, and apply the settings. (you can always go back and revert to the original printer driver)

  What version of Word are you using?

  If the problem is resolved and you appreciate my help, please click on the "accept as Solution" and the buttons 'Thumbs Up'. Let me know how make you out. See you soon!

• Printing problem on deskjet 4510 with windows 8.1

  I bought a new deskjet 4510 and have installed via usb on my desktop running windows 8.1. This isn't the impression through products of ms office word, excel etc. and either through wordpad. I can print Notepad files and pdf via adobe reader software.

  I tried HP print and scan doctor who did not find any problem with the printer and print a test page.

  I tried uninstalling and reinstalling, setting the printer wireless to the top but could not do print.

  I looked at the help on this forum and also tried selective installation, disabling all services except when starting microsoft services, but the problem remains.

  Help, please.

  Hey @rshri7869.

  Welcome to the Forums of HP Support!
  
  I understand that you meet your HP Deskjet printing problems in advantage 4510 series e-all-in-one printer to your computer Windows 8.1. You have included a large number of useful information in your post, so thank you. After reviewing the troubleshooting you have already finished, I came to the conclusion that what you feel is a conflict of driver on your computer Windows 8.1. To fix this please follow the steps below.

  How to add another driver:

  1. Open the Start screen (by selecting the windows start button in the lower left corner or by selecting the "Windows" button at the bottom left of your keyboard to the left of the 'Ctrl' key
  2. In the start screen, type "Devices and printers"
  3. If the option devices and printers automatically fills, click settings at the top right and then click on devices and printers.
  4. In the devices and printers folder right click on your series Deskjet 4510 and left click on printer properties
  5. Left click on the Advanced tab
  6. Left-click on new driver
  7. When the new window driver opens just hit 'next' until you see a list of manufacturers on the left and a list of printers on the right.
  8. Select HP as the manufacturer on the left
  9. DeskJet 9800 select the printer on the right. If Deskjet 9800 is only select "Windows Update" at the bottom left and once the update has been completed, you will be able to select Deskjet 9800.
  10. After selecting Deskjet 9800 hit next complete the new driver Wizard
  11. Under the printer properties window, select 'Apply' but do not hit OK
  12. Select the general tab
  13. Rename your printer in HP Deskjet 4510
  14. Click OK
  15. Finally, right-click on your Deskjet 4510 series once more and click on Printing Preferences
  16. Left click on the paper/quality tab
  17. Left click on the dropdown 'Normal' for the print quality down to the right and change its normal fast
  18. Press apply and OK
  19. Try to print!

  Please let me know if the steps I have provided to resolve your problem. Good luck!