Change the default location for the recording of files and downloads

Similar Questions

• Can I globally change the names of files and or directory to lowercase to uppercase?

  in Windows XP or in Windows 7, globally change the names of files and or directory to lowercase to uppercase?

  A single configuration change probably will not accomplish this.

  Your best bet is probably the freeware "Bulk Rename Utility" program which has a section dedicated to change the case of file names.

  Bulk Rename Utility: <> http://www.bulkrenameutility.co.uk/Main_Intro.php >

  HTH,
  JW

• Change the name of files and folders in data warehouses

  Is it safe while a virtual machine is running to change the name of the VMDK files and folders in a data store?

  I discovered that a VMS VMDK files have a different name for the virtual machine itself, then someone changed the name of the virtual machine after you have created the records

  I had to do it a few times, will try to document the process that I follow.  If you have many warehouses of data, then make a note of what data store, the machine is in.  The next step is to unregister the virtual machine from vCenter / ESXi

  Then, you need to enable SSH on your ESXi host

  Use Putty or something similar for you connect to the ESXi host

  Run the following commands (in italics)

  cd vmfs/volumes / that is, if the data store that contains the virtual computer is named datastore1 then you would run cd/vmfs/volumes/datastore1

  Then run ls to verify that the virtual machine file is here

  Rename the folder by using mv

  Change to the folder with cd

  Rename the nvram, vmsd, vmx and running again is to say the mv

  MV oldname.nvram newname.nvram

  MV oldname.vmsd newname.vmsd

  MV oldname.vmx newname.vmx
  

  MV 1234.hlog - oldname newname - 1234.hlog

  Rename the vmdk with vmkfstools EI oldname.vmdk newname.vmdk

  Edit the vmx with vi newname.vmx

  Replace references to oldname to newname in this file

  Register the virtual machine with the ESXi server and it should be OK

  This link gives more details and other methods VMware KB: rename a virtual machine and VMware ESXi and ESX records

• Change the properties of files and folders

  I recently changed the computer name and administrator, but I can't delete properties of former directors, i.e. name of files and folders. How can I do this?

  Where in poperties are you talking about?  Here is the list of authorized users - security and if you are looged Admin everything you need to do is click on edit and select another administrator, and then click on delete and it's done.  I don't think that this deletion process can be done throughout the world - and if is not necessary as this other account administrator is no longer eistss or has been disabled.  You should already be added to the Administrators group so that your username does not need to be added for access.

  If this isn't security, where are you talking about?  What are the 'properties' belong to the former administrator.  I don't understand.  Could you please further explain and tell me exactly how to get to the screen you are talking about?  In addition, please explain what you are tyring to accomplish by doing this - what is the problem with the other 'properties' of the administrator that you need to remove the name and I guess only to insert your new name?

  Thank you!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I know it of minor, but how can I change the list of files and folders from a to z a z?

  I may be minor but it drives me crazy.

  AL

  Top of the page, click the name once (that he will order A > Z) and if you click it again it will order Z > A

  

• What is the default location for the cache?

  I made the mistake to change my default location for the cache for Adobe Bridge and now I want to change it back... but I can not find the folder or know the path.

  Hi lorenkahle

  • Navigate to C:\Users\"Your user name' \AppData\Roaming\Adobe\Bridge CC\Cache (Windows)

  / User/Library/Caches/Adobe Bridge CC/Cache / (MAC)

  Bridge Cache in the Cache folder.

  You can set it to this place

  • If this does not help, you can reset bridge default preferences that will change the location of the cache.

  For so press and hold the CTRL, ALT, Shift (Windows) / Cmd + Option + Shift (MAC) during the start-up of bridge and make check reset preferences, and then click Ok

  

  Concerning

  Assani

  
  

• Change the default location for saving the photos in 10 items.

  How can I change the default location for saving images for the first time in 10 items? For some reason, the program is saving my work in the Temp folder, when I need the work in the library of images.

  From the Organizer, go to:

  Edit > preferences > files

  Click on the Browse button and navigate to your pictures folder

• Default location for pictures of the store iprocurement

  Hello

  We are implementing iprocurement.

  What is the default location for image bank iprocurement.

  In our case the POR profile option: hosted Images directory is empty.

  If it is empty, which is the default location.

  Is it a good idea to map profile POR option: directory of Images hosted at /OA_MEDIA/

  Kind regards

  Anita

  /OA_MEDIA/ is a virtual directory and points $OA_MEDIA path on the server.

  If you have access to Oracle Application Server, and then follow these steps. Or ask your DBA application the following steps and give you the path of directory.

  1. open a new terminal session > log in as 'applmgr.

  2. install the application environment by running the file ".env' application.

  3. simply type echo $OA_MEDIA. The returned path is the path of the virtual directory of/OA_MEDIA /.

  If you are about R12.2 or higher then the output will be something like this - / u01/oracle/SCREWS/fs1/EBSapps/comn/java/classes/oracle/apps/media. When the SCREW is the context and the fs1 is the base application directory direct environment.

  Concerning

  Kamal Khan

  www.AclNZ.com

• change default location for new virtual machines programmatically

  I know that you can change the default location for new virtual machines through the preferences GUI, but I want to be able to change it for all those who use VMWare Workstation in my company, so that it is more advanced to the personal folder of the user.

  Where exactly is stored?  I don't see in the registry.

  Thank you!

  WS does not use the registry to store settings.

  Set the path in UNK for each user:
  prefvmx.defaultVMPath = "F:\. »

• I change the settings of firefox and accidentally closed on the display tab, which displays the files, settings, and tools. I can't see how to reset it back to default where I can see those?

  I change the settings of firefox and accidentally closed on the display tab, which displays the files, settings, and tools. I can't see how to reset it back to default where I can see those?

  You can hide the menu bar in Firefox 3.6 on Windows, on "view > toolbars" or via the contextual right click menu on a toolbar.
  Press in and hold the Alt key to display the menu bar.
  Go to "view > toolbars", right click on the menu bar, or press Alt + V T to select the toolbars to show or hide.

  See also what happened to the file, edit and view menus?

• Rich Table: entity validation fails, but the user can change the record! : O

  Hello
  I develop with JDeveloper 11.1.2.1.0 and I have the following problem. I have a rich table editable according to entity/view with a line entity level validator method that checks the consistency of rank according to custom rules.
  I noticed that if the validator fails, the error message is displayed correctly, but it is possible to move to a different folder and this causes a lot of problems. I need avoid recording of variation when this validator fails. I know there is a way to block navigation on an element using clientListener and javascript, but it's a different need because I don't want the user to change the recording while the validator fails.
  How can I do?
  Thank you
  
  Roberto

  Roberto R SCC wrote:
  I noticed that if the validator fails, the error message is displayed correctly, but it is possible to move to a different folder and this causes a lot of problems. I need avoid recording of variation when this validator fails. I > know there is a way to block navigation on an element using clientListener and javascript, but it's a different need because I don't want the user to change the recording while the validator fails.
  How can I do?

  When you change a line, it is the currentRow on the iterator. You do not want any line to become the currentRow.
  I would go to this topic, in this way: substitute the selectionListener table and the listener to custom selection, check if the current currentRow (the one you are editing) isValid (EntityImpl::isValid).
  Proceed with the treatment of the selection event only if it is validated... You could even show an error or a warning message asking the user to provide valid data and even commit the line before choosing another.
  (Sorry, don't have an example of a code of practice now)

• XP pro do not start after changing the Boot.ini file

  The problem is that my C: partition Windows 7
  D: has XP Pro

  These should be considered right resp. partitions 1 and 2?

  I wanted to first XP pro to start the default partition.

  A few days ago, I made a change to the boot.ini file. But since XP Pro was not starting at all.

  I tried XP Pro to start first that the default partition.

  Given that XP Pro and my D: drive have not been starting, I consulted the boot.ini file in C:, Windows 7 partition and I changed the order (i.e. partition No.) in the boot.ini file and saved it to the required location, i.e. D:/WINDOWS/pss.
  through my drive C: of work, i.e. the partition of Windows 7, but it still does not work because apparently even though I save here, the actual values and the paths of the partition are not actually be changed on the system. I confirmed this by going into the CMD shell switching to D: and by running the command D: > bootcfg.
  Apparently any values I save in the boot.ini file that I save as a text file or "All files" in D:/WINDOWS/pss/it does not actually change in the system because whenever I run the command bootfg values are remaining still and not able to be changed, because apparently it is not saved in XP Pro and the D : partition. No matter what I do and what I put in the boot.ini file to access the values through the windows 7 partition, the values that bootcfg returns me are always the same and he refuses to change the name of path or anything else. No matter what orders, I also put in bootcfg himself.

  These are the values that bootcfg gives me:
  default: multi (0) disk (0) rdisk (0) partition (1) \WINDOWS

  Boot entries:
  Boot entry ID: 1
  Friendly name of operating system: MS Windows XP Professional
  Path: multi (0) disk (0) rdisk (0) partition (1) \WINDOWS
  The operating system load options: / noexecute = OPTIN/FASTDETECT/usepmtimer

  My XP Pro partition is simply not booting, and it of my main partition and has all my work. It is imperative that it starts.

  My Windows CD is also not start because apparently my DVD drive does not work properly, I had the anti malware threatfire (ThreatFire) installed on my XP D:Windows program disk but have uninstalled just in case it was blocking my changes to the system.

  On C:Win7, I put the default operating system option in the Advanced tab for Win7 and the D:XP Pro to XP Pro, when he was the starter and work. Now I can only access my files D:XP Pro Player C:Win7. But XP is not just start. What shd - I do? Thks.

  I don't have a very practical windows CD but my CD/DVD drive is not read and does not properly.

  Looks like your original post stated that your cd/dvd does not work.

  Respectfully, you will continue these hap hazard patches and your computer will not start at all. I'll try to help you once again. Please follow closely.

  Start your computer by loading Windows 7. Click HERE and download EasyBCD. Install the software in trial version. Once installation is complete open EasyBCD. You will see an interface like the image below. Click Add a new entry.

  

  A new screen appears as in the image below. Use the drop down menu to select Windows NT / 2 k/XP / 2 k 3 as described below. Type the name of the operating system in the box below. Of course, it will be Windows Xp (you can add the home or Pro to the name if you want). Make sure now that there is a check mark in the box "automatically detect the correct player. Once you have completed these steps click on 'add an entry '. That's all! You are finished. If all goes well, and if you have followed these steps carefully, there, now you have a system dual boot.

  

  You can now start working on your cd/dvd problem.

• How can I change a default install for Flash Player/ActiveX directory

  Hi all

  I try to change a default installation directory:

  -flashplayer18.0.0.209.msi

  -flashplayeractivex19.0.0.000.msi

  I run the following command:

  C:\Windows\System32 > msiexec /i C:\Users\User\flash\flashplayeractivex19.0.0.000.msi INSTALLDIR = "C:\Test" /qb

  The 'Test' folder is created, but completely empty.

  so, I can change a destination for Flash Player folder?

  Thank you

  Hello

  You cannot change the default location for installing Flash Player.  Flash Player installs in a specific directory and browsers know what directory to locate the Flash Player in.

  --

  Maria

• I changed the settings of Java and now Firefox plant she opens up, even in safe mode; How can I fix?

  I tried to change the settings to access the comments section of Slate.com. Good or bad, I changed a setting Java-1 to 2. The setting spoke in: config and I think it was some sort of max. As I can't open anything, I'm not sure.

  When I made the change, firefox crashed immediately, whenever I tried to reopen, even in safe mode, it hangs again immediately and will not reopen.

  Hi pternagy,
  Sorry, you have problems.

  For any future reference. Those of us who mess directly with: config soon find out how to get errors and it is wise to backup. Occasionally backup of your entire profile for example can be useful and would probably give you a quick solution of the copy on the file from the backup.

  • Backup and restore Firefox profiles information

  OK on the topic to try to get Firefox back as it was:
  Find your profile and the prefs.js file and rename that. (The renamed file is a potentially useful backup.) Firefox is then forced to regenerate the file and will reset your default preferences. You can then re open and use Firefox. Then, try to return to normal.

  Try to manually change the file prefs.js is normally a bad idea. However, if this is a one-time change prefs it would be possible to directly edit the prefs.js file (while Firefox is closed) to get everything back to how it was before. You have the file renamed to work with. Probably best to test this in a new additional profile so only break you test additional essential Firefox profiles profiles works do not.

  These articles should help you:

  • http://KB.mozillazine.org/prefs.js_file
  • _Solution-2-delete-Firefox-preference-files Reset Firefox preferences to troubleshoot and solve problems
  • Profiles - where Firefox stores your bookmarks, passwords and other user data#w_finding-your-profile-without-opening-firefox
  • http://KB.mozillazine.org/Using_multiple_profiles_-_Firefox

  Please post back with how you go and if you need additional assistance.
  Good luck.

• How can I change the icons of file movie back to screenshots instead of the folder view changing vlc cone already tried

  I have two granddaughters, 5 and 4, who can't read yet, and I did something that I can't fix. I run Win7, Google Chrome, and VLC is my default player. In the past, the icons of file movie (cartoon) were screenshots, and girls can choose what they looked at. Help please, because the girls are old enough to believe that I REALLY want to verbally list the entire (hundreds) of their shows list EVERY 30.60, or 90 minutes.

  Hi William,.

  Please see the link to change the display of files in Windows 7.

  Behavior and change folder views

  http://Windows.Microsoft.com/en-pH/Windows-Vista/change-folder-views-and-behavior (Also applies to Windows 7)

  For all windows questions do not hesitate to contact us and we will be happy to help you.