Change the filter Twist on vector of "Virtual filter effect" to the "real vector.

Similar Questions

• Changing the connections of bridge without virtual network Editor

  I wish I could change the bridged network adapter without using the virtual network Editor, i.e. via a script or VIX. COM.

  The only files I found related to the virtual network editor are those located in the C:\ProgramData\VMware\, which none does not seem to allow me to specify the actual card to use in the bridge. While these files allow to specify which virtual network to use, I have to go a little further and change the real device for the virtual network. So instead of change between 'vmnet0' or "vmnet1", I need to change the NIC vmnet0 uses.

  I am running VMware Workstation 8.0.4 on Windows 7 64 bit.

  Thank you

  Luke

  On the Windows 2003 hosts, I used to do it like this:

  net stop vmnetbridge
  -then regedit key HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\VMnetBridge\Parameters\Adapters
  -When does
  net start vmnetbridge

• I need help with start up after changing the username.

  I downloaded El Capitan on my MacBook Air without any problem.  Then, I changed my username under user accounts.  I restarted my computer, as has been suggested, but now when I type my password to connect, it just goes to the El Capitan background screen and nothing opens.  All I see is the color wheel and the display of the mountain.  I think that its not to recognize my account.  How can I fix? I tried to go into safe mode, but I don't know how to fix it once I am there.  Can someone help me?  Thank you, Sandi

  How did you change your username?

  You cannot change an account name in system preferences. You can add or delete accounts and change a password, but change the real name requires a lot of technical work via the Terminal application.

• If I rename a clip in the body, is there a command to change the file name as in FCP7?

  In FCP7 I could rename a clip in final cut PRO, and then use a menu command to change the real file name to match:

  

  I can do this in body or prelude?

  Thank you!

  MtD

  This option is only available in the project manager.

  FEATURE request

• VCO allows you to change the owner of the Virtual Machine

  Hello

  All the world has discovered a way to change the owner of a virtual computer through vCO?

  I can update the IaaS record with the new owner:

  //Find the vCAC Owner Object
  var modelName = 'ManagementModelEntities.svc';
  var entitySetName = 'Users';
  var filter = "indexof(UserName,'" + Owner + "') gt -1";
  var orderBy = '';
  var top = 1;
  var skip = 0;
  var headers = null;
  var select = null;
  var entity = vCACEntityManager.readModelEntitiesBySystemQuery(vCACHost.id, modelName, entitySetName, filter, orderBy, select, top, skip, headers);
  
  
  System.log("User Name - " + entity[0].properties.get("UserName"));
  
  
  
  
  //Setup new links
  var links = {
    Owner: entity[0]
  }
  
  
  //Update VM with new Owner Link
  var updateProperties = new Properties();
  System.getModule("com
  
  
  
  
  
  
  
  
  ibrary.vcac").updateVCACEntity(vCACHost.id, modelName, "VirtualMachines", vCACEntity.keyString, updateProperties, links, null);
  

  Is anyway to update this information in the COFFEE database as well? The owner of the object of custom resource field is read-only, and there is no method to set the owner.

  Thank you

  James

  After a few trials and investigations... I thought about it. Basically, you must update the link as posted on the virtualmachine entity owner earlier. You then the kickoff of operations workflow 2, UpdateMachineNotes and UpdateMachineOwner.

  UpdateMachineNotes updates the VRMOwner field in vsphere, UpdateMachineOwner updates the DB COFFEE (I guess, did not follow it throughout again).

  After creating the operation, you must add 2 workflowoperationarguments to identify which virtual machine to run the operation on and the user of the identity for the operation.

  The following code executes a UpdateMachineNotes:

  //Global Variables
  var modelName = 'ManagementModelEntities.svc';
  var links = null
  var headers = null;
  
  //Create the workflow operation
  System.log("Create operation.")
  var entitySetName = 'WorkflowOperations';
  var properties = {
     OperationName:"UpdateMachineNotes"
  };
  var operation = vCACEntityManager.createModelEntity(vCACHost.id, modelName, entitySetName, properties, links, headers);
  
  //Setup variables for arugments
  var entitySetName = 'WorkflowOperationArguments';
  var links = {
    "WorkflowOperation":operation
  }
  
  //Create workflow argument 1
  System.log("Create argument 1.")
  var properties = {
     Name:"VirtualMachineId",
     Value:vCACVM.virtualMachineID.toString()
  };
  var argEntity1 = vCACEntityManager.createModelEntity(vCACHost.id, modelName, entitySetName, properties, links, headers);
  
  //Create workflow argument 2
  System.log("Create argument 2.")
  var properties = {
     Name:"IdentityUser",
     Value:Owner
  };
  var argEntity2 = vCACEntityManager.createModelEntity(vCACHost.id, modelName, entitySetName, properties, links, headers);
  

  The following code executes a UpdateMachineOwner:

  var modelName = 'ManagementModelEntities.svc';
  var entitySetName = 'WorkflowOperations';
  var links = null
  var headers = null;
  
  var properties = {
     OperationName:"UpdateMachineOwner"
  };
  System.log("Create operation.")
  var operation = vCACEntityManager.createModelEntity(vCACHost.id, modelName, entitySetName, properties, links, headers);
  
  var entitySetName = 'WorkflowOperationArguments';
  var links = {
    "WorkflowOperation":operation
  }
  
  System.log("Create argument 1.")
  var properties = {
     Name:"VirtualMachineId",
     Value:vCACVM.virtualMachineID.toString()
  };
  var argEntity1 = vCACEntityManager.createModelEntity(vCACHost.id, modelName, entitySetName, properties, links, headers);
  
  System.log("Create argument 2.")
  var properties = {
     Name:"IdentityUser",
     Value:Owner
  };
  
  var argEntity2 = vCACEntityManager.createModelEntity(vCACHost.id, modelName, entitySetName, properties, links, headers);
  

  Running an update owner, followed by these 2 operations link, will do exactly the same thing would have operations by clicking "Edit" in the GUI.

  -James

  Edit: The owner variable, should be in the format of @. vCACVM, is an IaaS VM object. vCACHost is a host of vCAC IaaS.

• PowerCLI script needed to change the 9 network adapters to a virtual computer in a single operation

  I got about 30 mV, and I need to change the 9 cards each virtual computer network. The script below takes a while to run, is there a way to speed it up, by changing all the interfaces of a VM in a single operation?

  $VM = "MY_VM_".

  1... 30 | % {

  $VMS = $VM + $_

  Get-vm-name $VMS | Get-NetworkAdapter-name '2 network adapter | Together-NetworkAdapter - NetworkName "blah1" - connected: $true - confirm: $false

  Get-vm-name $VMS | Get-NetworkAdapter-name "Network adapter 3 | Together-NetworkAdapter - NetworkName "blah2" - connected: $true - confirm: $false

  Get-vm-name $VMS | Get-NetworkAdapter-name "NIC 4 | Together-NetworkAdapter - NetworkName "blah3" - connected: $true - confirm: $false

  Get-vm-name $VMS | Get-NetworkAdapter-name "adapter 5 network | Together-NetworkAdapter - NetworkName "blah4" - connected: $true - confirm: $false

  Get-vm-name $VMS | Get-NetworkAdapter-name "NIC 6. Together-NetworkAdapter - NetworkName "blah" - connected: $true - confirm: $false

  Get-vm-name $VMS | Get-NetworkAdapter-name 'network 7 adapter | Together-NetworkAdapter - NetworkName "blah" - connected: $true - confirm: $false

  Get-vm-name $VMS | Get-NetworkAdapter-name '8 network adapter | Together-NetworkAdapter - NetworkName "blah7" - connected: $true - confirm: $false

  Get-vm-name $VMS | Get-NetworkAdapter-name 'network 9 adapter | Together-NetworkAdapter - NetworkName "blah8" - connected: $true - confirm: $false

  Get-vm-name $VMS | Get-NetworkAdapter-name '10 network adapter | Together-NetworkAdapter - NetworkName "blah9" - connected: $true - confirm: $false

  }

  Thank you very much!!. I was able to change the script of LucD work in DVS.

  FINAL VERSION:

  $hash = $null

  $hash = @ {}

  $dvs = get-view (get-VirtualSwitch-name "DVS5.1")

  $dvs. PortGroup | % {Get-View-Id $_} | %{

  $hash.add ($_.) Name, $_. Key)

  }

  # Loop below for all virtual machines

  1... 90 | %{

  $i = $_

  write-host 'tenant = $i'

  $convertTab = @ {}

  "Network adapter 1" = "$1te I".

  "Network adapter 2" = "$2te I".

  'Network adapter 3' = ' $3te I ".

  "Network adapter 4" = "$4te I".

  'Network adapter 5' = ' $5th I ".

  'Network adapter 6' = ' $6te I ".

  'Network adapter 7' = ' $7te I ".

  'Network adapter 8' = ' $8te I ".

  'Network adapter 9' = ' $9te I ".

  'Network adapter 10' = ' $10te I ".

  }

  Notice-EEG - ViewType VirtualMachine-property "Config.Hardware.Device" - filter @{' Name '=' VM-$i - 1 ""} | %{

  $spec = new-Object VMware.Vim.VirtualMachineConfigSpec

  $_. Config.Hardware.Device | where {$_-is [VMware.Vim.VirtualEthernetCard]} | %{

  $dev = new-Object Vmware.Vim.VirtualDeviceConfigSpec

  $dev. Operation = "├editer."

  $dev. Device = $_

  $dev.device.Backing = new-Object VMware.Vim.VirtualEthernetCardDistributedVirtualPortBackingInfo

  $dev.device.backing.port = new-Object VMware.Vim.DistributedVirtualSwitchPortConnection

  $dev.device.backing.port.switchUuid = $dvs. UUID

  $dev.device.backing.port.portgroupKey = $hash [$convertTab [$_.]] DeviceInfo.Label]]

  $spec. DeviceChange += $dev

  }

  $_. ReconfigVM ($spec)

  }

  }

• Tecra m2V faced with applications. Need to change the virtual memory?

  I have a Tecra M2V under XP. I've been experiancing slowdowns in all of my running applications. I have cleaned the readers of PC, defragmented etc but there seems to be no change.

  What is virtual memory? If so, how can I solve them?

  If this isn't the case, is to do with XP - I mean with each XP update that we had there at - it something like the BIOS settings that need to be updated?

  TIA

  The

  Hello

  The Windows XP operating system use a space on the hard drive as virtual memory. This means that a file is a space on the hard disk that Windows uses as if it were RAM.
  The file size is variable and you can change the size of file in the performance Options.

  Please go to control panel - system - Advanced tab. You will find the Performance parameters.
  In the performance Options, you will find 3 tabs (Visual effects, advanced, Data Execution Prevention). On the Advanced tab, you can find the option to change the virtual memory.

  Good bye

• How can I change the filter settings for the e-mail account of my child?

  How can I change the filter settings for the e-mail account of my child?

  Hi Schaefle,

  May I know if you refer to web filtering? If Yes please visit this link to learn how to change the filter settings.

  Note: for to work in web filtering settings, you must install and configure the filter of family security on each computer your child uses.

  For more information on parental controls, please visit http://windows.microsoft.com/en-US/windows-live/essentials-help-center

  Thank you!

• Change the channel for Virtual Wifi Miniport Adapter

  Hello!

  I was experiencing problems of interference when using the module of Virtual wifi miniport, and I would like to know if there is any way I can change the channel on the v-wifi is bradcasting?

  THX!

  Lee

  Well, I tried to find the latest driver for my card, I could find anything to the atheros website (what gives?).

  Win 7 told me I got the latest driver, but I wouldn't trust windows update, as they said that my ethernet card was up-to-date (see 7.04) and when I went on the Realtek site, driver to v.7.23...

  Anywho! I was not able to change the channel for the ad - hoc connection. I tried the connection with a PC and still cannot connect (so not a problem related to Mac).

  I don't know what is happening with the miniport module or the wireless card (I tried different settings in properties and the Advanced Options tab, as power management), but it just would not work. So I got this router, and everything works fine.

  This is!

• Compact virtual hard disk and change the type of drive in static

  Hi all

  I want to change the type of my dynamic static vm disk and now I want to compact the virtual hard disk memory for this virtual machine but I want to it without affecting the control points of this virtual machine that I created earlier. I use the SCVMM 2012 administration console. Any reg suggestions it will be useful.

  Thank you

  You should post your question in the following forum for help and appropriate responses:

  http://social.technet.Microsoft.com/forums/en-us/w7itprovirt

• How can I change the date used to filter the screen heat for a resource map?

  The dates that appear at the top of the heat map of resources are blocked on March 2014 until August 2014. How can I change these dates to see the current and future commitments to my resources?

  

  To change the dates, you will need to save on the registration page and modify the advanced search criteria. These filter dates apply for the following clicks and pages of details when displaying resources.

  

  

• How to change the filter to the filter by another column - group calendar page 1

  Any version of the Summit either 4.2 or 5.0 - windows 7 OS

  I know it's a very simple question, but I can't understand this.

  I want to change the filter on the group calendar page 1 of the default "Event status" below

  

  The only code that I find is shown below.

  

  I added my own selection list of the button with the following code bar

  < tt > Select GroupName, group_id from EBA_CA_EMAIL_GROUPS ORDER BY GroupName < /tt >

  But when I change the selection list from one option to the other that the calendar is not sorted by events that have particular GroupName. I tried to replace the code in the default selection list and it did not work. There must be another code, check the filter.

  How can I add my own list of selection and filter calendar events based on that select list option is selected?

  Richie V wrote:

  Any version of the Summit either 4.2 or 5.0 - windows 7 OS

  I know it's a very simple question, but I can't understand this.

  I want to change the filter on the group calendar page 1 of the default "Event status" below

  I added my own selection list of the button with the following code bar

  Select GroupName, group_id from EBA_CA_EMAIL_GROUPS ORDER BY GroupName

  But when I change the selection list from one option to the other that the calendar is not sorted by events that have particular GroupName.

  Probably you meant 'filtered' rather than 'sort '?

  I tried to replace the code in the default selection list and it did not work. There must be another code, check the filter.

  In the Group APEX 5.0 calendar application, the filter is implemented in line 20 of the schedule area source query:

  select e.event_id,
        case when et.display_color is not null then
              'apex-cal-'||
              (select lower(cp.color_name) from eba_ca_color_prefs cp where cp.bg_color = et.display_color)
        end css_class,
        e.event_name,
        case when e.display_time = 'N'
              then trunc(e.event_date_time)
              else e.event_date_time
              end event_date_time,
        to_char(e.event_date_time,v('APP_TIME_FORMAT')) disp_time,
        substr (
        case when to_char(e.event_date_time,'MI') = '00' then
              ltrim(to_char(e.event_date_time,'HHam'),'0')
          else
              ltrim(to_char(e.event_date_time,'HH:MIam'),'0')
          end|| ' '||e.event_name,1,255) disp_col
    from EBA_ca_events e,
        EBA_ca_event_types et
  where (:P1_EVENT_TYPE = e.type_id or :P1_EVENT_TYPE is null)
    and e.type_id = et.type_id (+)
  

  with P1_EVENT_TYPE being included in the property of the region and by using the action Elements of the Page to send dynamic update schedule to trigger a refresh of partial page in the calendar area.

  How can I add my own list of selection and filter calendar events based on that select list option is selected?

  1 create your filter as a copy the item P1_EVENT_TYPE item.

  2. replace the LOV definition by the code you need.

  3. Add the necessary filter predicate in the WHERE clause of the query source region.

  4. Add the name of your filter element to the region of the Items property of the Page to send.

  5. Add the name of your item to the Items property in the when section of action Dynamics to update the calendar .

• I have dl'ed pic of Shutterstock Vector but can not change the text.

  I remember I have open upwards or something like that last year, but I forgot how much exactly.

  Anyone know how you can change the text in a vector image in Photoshop? When I open it, it's an entire layer. Cannot modify the text that was on the peak.

  You would have to edit it in Adobe Illustrator, and from there, you can delete the text. Double-click on the image to select the specific area (using the isolation mode) and then delete.

• change the colors in the vector shapes - photoshop script

  I have a problem with the code which changes the colorsand vector shapes. It only works on a single layer, and if you select more than one layer, it pops up error. Is - that someone knows how to solve this problem?

  #target photoshop
cTID = function(s) { return app.charIDToTypeID(s); };
sTID = function(s) { return app.stringIDToTypeID(s); };

function Action3() {

  function step1(enabled, withDialog) {
   if (enabled != undefined && !enabled)
   return;
   var dialogMode = (withDialog ? DialogModes.ALL : DialogModes.NO);
   var desc1 = new ActionDescriptor();
   var ref1 = new ActionReference();
  ref1.putEnumerated(sTID("contentLayer"), cTID('Ordn'), cTID('Trgt'));
  desc1.putReference(cTID('null'), ref1);
   var desc2 = new ActionDescriptor();
   var desc3 = new ActionDescriptor();
   var desc4 = new ActionDescriptor();
  desc4.putDouble(cTID('Rd '), 243);
  desc4.putDouble(cTID('Grn '), 110);
  desc4.putDouble(cTID('Bl '), 93);
  desc3.putObject(cTID('Clr '), sTID("RGBColor"), desc4);
  desc2.putObject(cTID('FlCn'), sTID("solidColorLayer"), desc3);
   var desc5 = new ActionDescriptor();
  desc5.putInteger(sTID("strokeStyleVersion"), 2);
  desc5.putBoolean(sTID("fillEnabled"), true);
  desc2.putObject(sTID("strokeStyle"), sTID("strokeStyle"), desc5);
  desc1.putObject(cTID('T '), sTID("shapeStyle"), desc2);
  executeAction(cTID('setd'), desc1, dialogMode);

  };

  step1();};

  Action3.main = function () {

  Action3();};Action3.main();

  2016, use it at your own risk.

  #target photoshop

  If (app.documents.length > 0) {}

  myDocument var = app.activeDocument;

  var theLayers = getSelectedLayersIdentifier();

  for (var m = 0; m< thelayers.length;="" m++)="">

  changeSolidColor (theLayers [m], 128, 0, 255);

  }

  };

  //////////////////////////////////////////

  based on the code of paul m..

  function getSelectedSoidColorLayersIdentifier() {}

  var selectedLayers = new Array;

  Var ref = new ActionReference();

  ref.putEnumerated (charIDToTypeID ("Dcmn"), charIDToTypeID ("Ordn"), charIDToTypeID ("Trgt"));

  var / / desc = executeActionGet (ref);

  If (desc.hasKey (stringIDToTypeID ("targetLayers"))) {}

  DESC = desc.getList (stringIDToTypeID ('targetLayers'));

  var c = desc.count;

  var selectedLayers = new Array();

  Browse layers selected;

  for (var i = 0; i)<>

  try {activeDocument.backgroundLayer;

  var theIndex = desc.getReference (i). getIndex();

  } catch (e) {var theIndex = desc.getReference (i) .getIndex () + 1};

  get id for layers of solid color;

  try {}

  Var ref = new ActionReference();

  ref.putIndex (charIDToTypeID ("Lyr"), theIndex);

  var layerDesc = executeActionGet (ref);

  var theIdentifier = layerDesc.getInteger (stringIDToTypeID ("layerID"));

  var adjList = layerDesc.getList (stringIDToTypeID ('adjustment'));

  var theColors = adjList.getObjectValue (0) .getObjectValue (stringIDToTypeID ('color'));

  selectedLayers.push (theIdentifier);

  } catch (e) {};

  };

  If a single:

  } else {}

  Var ref = new ActionReference();

  ref.putEnumerated (charIDToTypeID ("Lyr"), charIDToTypeID ("Ordn"), charIDToTypeID ("Trgt"));

  var layerDesc = executeActionGet (ref);

  try {}

  var theIdentifier = layerDesc.getInteger (stringIDToTypeID ("layerID"));

  var adjList = layerDesc.getList (stringIDToTypeID ('adjustment'));

  var theColors = adjList.getObjectValue (0) .getObjectValue (stringIDToTypeID ('color'));

  selectedLayers = [theIdentifier]

  } catch (e) {};

  };

  Return selectedLayers;

  };

  change the color of solid color layer.

  function changeSolidColor (theIdentifier, theR, g target) {}

  // =======================================================

  var idsetd = charIDToTypeID ("setd");

  var desc4 = new ActionDescriptor();

  var idnull = charIDToTypeID ("null");

  var ref1 = new ActionReference();

  Ref1.putIdentifier (stringIDToTypeID ('contentLayer'), theIdentifier);

  Desc4.putReference (idnull, ref1);

  idT var = charIDToTypeID ("T");

  var desc5 = new ActionDescriptor();

  var idClr = charIDToTypeID ("Clr");

  var desc6 = new ActionDescriptor();

  idRd var = charIDToTypeID ('Rd');

  desc6.putDouble (idRd, theR);

  var idGrn = charIDToTypeID ("Grn");

  desc6.putDouble (idGrn, g);

  var idBl = charIDToTypeID ("Bl");

  desc6.putDouble (idBl, theB);

  var idRGBC = charIDToTypeID ("RGBC");

  Desc5.putObject (idClr, idRGBC, desc6);

  var idsolidColorLayer = stringIDToTypeID ("solidColorLayer");

  Desc4.putObject (idsolidColorLayer, idT, desc5);

  executeAction (idsetd, desc4, DialogModes.NO);

  };

• Editable interactive report. To change the list column dropdown type filter.

  Hi all, I thought I had posted this, but I can't find my post, so apologies if it turns up to twice more...

  XE SUMMIT 4.2 11.2

  Ive created an editable interactive report... Everything works very well, and I have several Text, LOV and selection list columns...

  However when I now click on a column header to filter, sort etc drop-down list is the same format as the column itself. So if for example, I have a text box, then the drop-down list is also text boxes, if the column is a column LOV, the filter drop-down list is a list of fields LOV. (Im assuming this is correct behavior, because it simply inherits the column parent..)   So, I would change the lists to a list of standard display so that they are in order and can be used...

  I think so? I know I have to do, which is either to substitute the function that generates the dropdown filter... or probably more simply, write a bit of JS/JQuery that modify data for drop-down lists.  Im still to learn, some help would be appreciated...

  I think so. (and please correct me if I'm talkiing... garbage)   I need to find each of the appearance of the DIV with the ID that corresponds to the drop-down list box, and then loop through each entry and change the structure...

  Currently the source for drop-down fields resembles the following (for a text field...). :

  < div id = "apexir_rollover_content" >

  < a href = "javascript:void (false); ">

  < input type = "text" value = "24489" maxlength = size "2000" = "6" name = 'f06' > < / input >

  < /a >

  < a href = "javascript:void (false); ">

  < input type = "text" value = "N1021" maxlength = "2000" size = "6" name = 'f06' > < / input >

  < /a >

  < / div >

  How could I 1) browse each occurrence of div id = "apexir_rollover_content" on my page, so I found out about each other, how would I go through the list and change the line above an input to a standard list item text...? Or is there a simpler way to do it?

  Kind regards

  Richard

  Hello

  Problem was on your process to GET the VALUES of LOV.

  You did not bind the variable values of cursor.

  I created another process for your page that manages LOV BUDGET_CAT

  Kind regards

  Jari