Change the fonts of the Table header, background color of the property node?

Can I change the font size, color and the background color of the cell for any cell in a table, however, I can't seem to do it for the headers.   Is it possible to do this?

have you tried to use an index of-1?

Ben

Tags: NI Software

Similar Questions

  • change the property of element in array for 'initialized '.

    I'm a newcomer here. And it's a simple question.

    The objective of this part is to record the data in the table.

    You can see that if the array element is not initialized, it will be not recorded in the worksheet, which saves space in the disk. So change the property 'initialized' of this feedback to unitialized array element?

    Thank you

    You can "right click on the item of data operations remove the element.

    (This has nothing to do with "uninitialized". The size of the array is indicated by the light elements, the dull items fall outside the valid range, which has nothing to do with the size of the container. Your first table has two components and that your second table has three elements).

  • Change the property of a component for a State given in actionscript

    Hi all

    In fact the following will be used in a skin (mxml). But I guess that this has no influence on the issue.

    Suppose I have two States, say 'normal' and 'highlight '. Suppose that there is a component of path spark with a fill property

    <s:fill>
  <s:SolidColor id="fullTabPathFill" color="#333333" color.highlight="#999999"/>
</s:fill>

    So I can do the following to change the color property using actionscript,

    function creationComplete():void {
  fullTabPathFill.color = 0x444444;
}

    But what happens if I want to change the color in the State "hightlight property? Is it possible to change the property 'color.highlight' using pure actionscript? Or is this a situation where only a variable bindable can be used?

    Thanks for your reply.

    create a new style on your component and how to bind the color.highlight property to it

    Take a look on

    http://www.jamesward.com/2010/07/30/how-to-define-styles-on-skins-in-Flex-4/

  • Change the property of the component with the property name

    Hello

    I have an app that will give a TextArea (id = text) and also a component which, at some point, will try to change the property of the text box "text" to a certain value. In the component, I have two channels, one containing the name of the text box property: 'text' and the other with the future new value of this property. I want to know is how to change in the component, the property of the TextArea component with only to have his name.

    Look at the high line, this kind of watch what I want to do, I know that's not possible, but maybe there's a way you can show me to do what I want

    Example Code:

    -Application:

    < mx:Text id = "text" width = "100%" height = "100%" / >

    < local: Componente id = "Main" / >

    -Component:

    < mx:Button click = "clickhandler" / >

    < mx:Script >
    <! [CDATA]

    private function clickhandler (): void {}
    var to the: String = "text";
    var aux2:String = Hi, "it's the new text";

    parentDocument [text].setPropertyByName(àles) = aux2;

    }

    []] >

    < / mx:Script >

    }

    []] >

    < / mx:Script >

    Thanks for your help

    Sebastián Toro O.

    parentDocument [text] [at the] = aux2;

  • How to change the property 'Border' of a Radio button?

    How to change the property 'Border' of a Radio button?

    TIA,

    -RFH

    What is the point of an option button if you can't see if it is checked or not?

    If you want a tool of indirect approach I suggest you use another thing. Maybe an annotation.

  • Header background color does not work

    Hello

    I'd do it stay change the color background of the header element, , but it does not work as I have thought


    First of all, here's the HTML code:


    <body>
<div id="wraper">
  <header>
    <h1><span>Pacific</span> Coastal Highway</h1>
    <nav>
      <ul>
        <li>Home</li>
        <li>Big Sur</li>
        <li>Pfeiffer Beach</li>
        <li>Elephant Seals</li>
        <li>Morro Bay</li>
      </ul>
    </nav>
  </header>
  // ... some other HTML elements & content ...
</body>

    , Within the < header > element we have < h1 > and < nav > elements, and in this < nav > element there is a list that is actually menu.


    Here it CSS code referring to these elements:

    #wraper {
    width: 1200px;
    background-color: #FFFFFF;
    margin-left: auto;
    margin-right: auto;
    margin-top: 0px;
    border-right: 1px solid #000000;
    border-left: 1px solid #000000;
}
body {
    margin: 0;
    background-color: #CBD2FB;
    font-family: "OpenSans Regular", "Gill Sans MT", Arial, "Times New Roman", sans-serif;
    color: #202020;
    background-image: -webkit-linear-gradient(270deg,rgba(135,167,207,1.00) 0%,rgba(204,217,234,1.00) 11.91%,rgba(232,238,245,1.00) 25.91%,rgba(202,212,220,1.00) 100%,rgba(0,0,0,1.00) 100%,rgba(135,167,207,1.00) 100%,rgba(138,169,207,1.00) 100%,rgba(135,167,207,1.00) 100%,rgba(202,212,220,1.00) 100%);
    background-image: -moz-linear-gradient(270deg,rgba(135,167,207,1.00) 0%,rgba(204,217,234,1.00) 11.91%,rgba(232,238,245,1.00) 25.91%,rgba(202,212,220,1.00) 100%,rgba(0,0,0,1.00) 100%,rgba(135,167,207,1.00) 100%,rgba(138,169,207,1.00) 100%,rgba(135,167,207,1.00) 100%,rgba(202,212,220,1.00) 100%);
    background-image: -o-linear-gradient(270deg,rgba(135,167,207,1.00) 0%,rgba(204,217,234,1.00) 11.91%,rgba(232,238,245,1.00) 25.91%,rgba(202,212,220,1.00) 100%,rgba(0,0,0,1.00) 100%,rgba(135,167,207,1.00) 100%,rgba(138,169,207,1.00) 100%,rgba(135,167,207,1.00) 100%,rgba(202,212,220,1.00) 100%);
    background-image: linear-gradient(180deg,rgba(135,167,207,1.00) 0%,rgba(204,217,234,1.00) 11.91%,rgba(232,238,245,1.00) 25.91%,rgba(202,212,220,1.00) 100%,rgba(0,0,0,1.00) 100%,rgba(135,167,207,1.00) 100%,rgba(138,169,207,1.00) 100%,rgba(135,167,207,1.00) 100%,rgba(202,212,220,1.00) 100%);
}
h1 {
    margin-top: 0px;
    font-size: 48px;
    text-shadow: 1px 1px 2px #969696;
    padding-top: 32px;
}

h1, h2, h3 {
    font-family: "Prociono Regular", "OpenSans Regular", "Gill Sans MT", "Times New Roman", Arial;
    color: #507AAD;
    text-align: center;
}

h1 span {
    position: relative;
    top: -37px;
    left: 35px;
    font-family: GoodDog, Arial, "Times New Roman", "Gill Sans MT", sans-serif;
    font-size: 47px;
}

header nav ul {
    margin-right: auto;
    margin-left: auto;
    list-style-type: none;
    padding-left: 0px;
    width: 705px;
    /* [disabled]margin-bottom: 10px; */
}

nav ul li {
    float: left;
    padding: 10px;
    display: block;
    width: 110px;
    text-align: center;
    background-color: #A9A3FF;
    border-right: 1px solid #FFFFFF;
    border-radius: 23px;
    background-image: -webkit-linear-gradient(270deg,rgba(135,167,207,1.00) 0%,rgba(204,217,234,1.00) 60.11%);
    background-image: -moz-linear-gradient(270deg,rgba(135,167,207,1.00) 0%,rgba(204,217,234,1.00) 60.11%);




background-image: -o-linear-gradient(270deg,rgba(135,167,207,1.00) 0%,rgba(204,217,234,1.00) 60.11%);



    background-image: linear-gradient(180deg,rgba(135,167,207,1.00) 0%,rgba(204,217,234,1.00) 60.11%);
    margin: 18px 5px;
}

    And, finally, this is what it looks like:


    Pacific Coastal Highway - Mozilla Firefox 2014-09-10 15.02.38.png



    Now, I would change the background of the < header > element (to display than whites behind this < h1 > menu in a different color) and so I just added the background of the < header > element in CSS: 


    header {
    background-color: #FF2D31;

}



    But here's what it looks like now:

    Pacific Coastal Highway - Mozilla Firefox 2014-09-10 15.09.11.png

    As you can see, Although the element < nav > list (menu) is IN the < header > element - the background color of the header of <>is right behind the element < h1 >.


    You know why This is the case and what would be the best way of fix ce problem?


    Thank you in advance.

    Try

    header {
    background-color: #FF2D31;
    overflow: hidden;
}

  • graph of waveform of filling via the property node

    Hello

    I want to fill a graphic waveform spirit multiple waveforms by programming. This means, the graph is the main VI, and use it in an another vi reference chart. Firstly I have to solve the correct reference waveform curve, then I use the "Value" property node The value must be the value of type variant, should be no problem. But the property node works only with table 1 d and not 2D.

    How can I fill it with table 2D programmatically? I use LabView 8.6, see attached example.

    Mitulatbati

    Hi mitulabati,

    You must specify the data type that you will be feeding to your chart, the default type is an array of 1 D.

    To do this, connect an empty 2D array directly on the graph, it will change the input to your waveform parameters and now the property node will accept this new data type.

    Hope this helps

  • Unable to modify the property in the property node

    Hello

    I am configuring a DAQmx routine where I record multiple analog channels. I am able to create the routine, but I read that there are some problems with multi-channel sampling (ghosting), so I wanted to avoid this.

    How to eliminate ghosting of my measurements? :

    http://digital.NI.com/public.nsf/WebSearch/73CB0FB296814E2286256FFD00028DDF?OpenDocument

    Furthermore, who directs you;

    How can I increase without delay using NOR-DAQmx or NOR-DAQ traditional (old)?

    http://digital.NI.com/public.nsf/WebSearch/65E7445DB1AA5DC586256A410058697B?OpenDocument

    However, when I try to use a property DAQmx Timing node, I am not able to change the property (see screenshot). I tried right click and left click and clicking on everywhere. I think that there is something I could not understand, but pointers would help a lot! Chaning between read/write does not help

    Never mind! Found the solution in the knowledge base

  • The property node reference

    Hello guys,.

    Using the property node, I confused with the terminal of reference there. Can we establish a special reference to the control (button, for example), but obviouly I couldn't connect the button directly to the point of reference. I find an example about which attached in attachment. How can I creat something like that? So enjoy!

    Phyyu,

    VI server references follow the structure of object-oriented class. A VI server reference can refer to a wide range of objects, such as a control, etc. variable indicator, VI. Server of VI References can be as strict or not strictly typed as you wish. A control/light specifically made reference refers to a command that you pass to it. You can request to be more rigorous by right clicking on the reference, and using menus to select the class that you want to reference. A tree of possible class might look like this: Server VI > generic > G object > control > Array. Now this reference requires a pointer to a table control and will not accept any other type of control. If you use this reference control to create a property node, the properties will be specific to the array class.

    A refnum is simply a numeric value that refers to a place in memory. Reference and refnum are used somewhat interchangeably in LabVIEW.

    I hope that answers your questions! See the help files of LabVIEW for VI server references to learn more about them.

    Kind regards

    Alexandra Valiton

    Technical sales engineer

    National Instruments

  • position in the property node is not updated in another while loop

    Hello

    I have a structure of the event in a while loop and I have a chart with 2 sliders on it. the chart is in the loop outside the structure of the event and it becomes a wave form when an event occurs.

    in a separate loop, I have 2 cursors cursor position property. I subtracted to get their distance. but when I move the sliders on the chart which is in the first, while the loop doesnot change the values given by the property nodes in the second loop

    is this something related to the structure of the event? don't needs real graphic to be updated all the time or is it ok if she becomes a waveform only on an event

    can someone please help

    Thanks in advance...

    The value of the variable "Stop 2"is in memory still "True" so on that a second (and resulting) running that your upper loop always ends after the first run.

    The display of "stop 2' LED is to be reset when you press the button"Get the waveform". making the False value.

    So reset the variable button after finishing two loops or before starting the two while loops.

    Tone

  • Error: The property node (arg 1) in .vi VISA set up a Serial Port (Instr)

    Hello

    I've seen people once they have gotten this error, but none of them really apply to my situation.

    Right now I use LabVIEW example code to read from a device manufacturer. This device is connected using a Tripp Lite USB adapter series (http://www.tripplite.com/en/products/model.cfm?txtSeriesID=782&txtModelID=2430) for the connection from the PC to device with RS232. The adapter works fine when using the software prepared in advance (not LabVIEW) given by the manufacturer and the COM port is seen by LabVIEW. When I run the program, I get the property node (arg 1) visa set up a Serial Port (Instr) .vi (I've also attached the VI but it's a standard VI I got of LabVIEW). I get this error despite the fact that I use the same COM port, who has worked with the manufacturer's software.

    I have attached manual of Protocol RS232/debit BUS (not sure if this applies) that requires the device. The device is a mass flow controller whose operating instructions is: (http://nemu.web.psi.ch/doc/manuals/device_manuals/Bronkhorst/917023--Operation%20instructions%20digi...

    I'm using LabVIEW 10.0.1

    Any help is appreciated

    Try to restart the PC and then try the LV version before trying other software.

    I have seen thrid party serial interfaces work on the first try but fail when you switch to another application. It was as if the pilot did not know that it was no longer the first process.

    Ben

  • How can I control the elements in the graphic palette (profile line) via the property node?

    Hello everyone,

    Is it possible to control the elements (graphic palette in the profile of the line) via the property node?

    Greetings zapfle

    In general, you must balance only Min/max property, then you can "zoom and Pan" by program:

    Andrey.

  • Display the property Node error 1077

    I created a vi with several analog inputs (up to 20), and I want to be able to turn on and off on the front panel plots. I currently have this case structure configured to go through each entry (i n), and the front (LED buttons) can be activated and deactivated to choose which plot to display:

    Turn work, the plots but I get this error message:

    1077 error has occurred to the property node (arg 1) in NetworkAnalyzer_UpdatedDAQmx.vi

    Possible reasons:

    LabVIEW: Value of property not valid.

    Property name: field Active

    All solutions? Thank you.

    Are you sure that the number of elements in the array of Boolean is the number of locations that you did? This error indicates that you have more items that you have drawn in your array of Boolean.

  • How to make the header background color or footer extend to the width of the browser?

    How to make the background color of the header or footer extend beyond the defined site? I would like the backround to extend to the width of the web browser of the user.

    Instructions to do this are included in creating a rectangle of width 100% which extends over the entire width of a browser window.

  • How to change the color of the elements of a digital picture (separately) programmatically by using the property node?

    For example, I have 3 digital controls, controlling 3 digital array elements (digital control is connected directly to the indicator). So if I change value in digital control 1, then the table item # 1 of the digital table should blush when the value is greater than 5. Similarly when I change NUM controls 2 item 2 of the table should turn red when the value control num 1 exceeds 10. Similarly for the 3rd element. In other words, I want to control the ownership of the elements of the array individually through the digital command separated.

    I did it for unique digital indicator.i.e. When I change the values of the control, then a single digital indicator changes color (text digital property BG) and with table values, changes the color of the entire table, but I want to change the color of the singles of the table element.

    Please help thanks.

    I hope you do well! You cannot change the properties of elements of an array. What you could do instead is probably using a table where you can change the background color of a cell?

Maybe you are looking for