change the property of element in array for 'initialized '.

Similar Questions

• How to change the sizes of elements of array programmatically?

  Hi all

  I have a small question about changing the size of the elements in the array. I hope someone can help, because I am in a bind!

  I connect certain intensities of a range of fibers using a camera. For the calibration of the system, I gain a picture of the camera, click on the image points to divide it into areas of interest. I have my image to overlay with a grid indicating the areas of interests - for example a 4 x 6 picture. I then have to select fibers - or Kings - I want to connect from.

  I have a cluster type-def (a number and a Boolean value) to specify the number of fibers and to enable logging of this fibre power. I superimpose a (transparent) picture of this typedef on my image to correspond with the regions of interest. So here's my problem - I want to change the dimensions of the table for each control corresponds to my KING. I can resize the elements of law on the elements on the façade, but couldn't find a way to do it programmatically. The array property node > element of array > limits don't "change to write" it's the first thing I tried.

  Its only really important elements alignment with my Kings - so adding in the gaps/spacing programmatically would also work for me... goal again once I can't understand how to do this! I've attached a screenshot of part of my image with table superimposed to show you all exactly what is my problem.

  Thanks in advance for you help,

  Dave

  PS I'm under Labview 8.6 without adding vision on.

  Here is my cheat (and cheap) way if you want to get fancy and Center digital indicators and booleans, you could add shims on the North and west sides, too.

• Change the property of a component for a State given in actionscript

  Hi all

  In fact the following will be used in a skin (mxml). But I guess that this has no influence on the issue.

  Suppose I have two States, say 'normal' and 'highlight '. Suppose that there is a component of path spark with a fill property

  <s:fill>
    <s:SolidColor id="fullTabPathFill" color="#333333" color.highlight="#999999"/>
  </s:fill>
  

  So I can do the following to change the color property using actionscript,

  function creationComplete():void {
    fullTabPathFill.color = 0x444444;
  }

  But what happens if I want to change the color in the State "hightlight property? Is it possible to change the property 'color.highlight' using pure actionscript? Or is this a situation where only a variable bindable can be used?

  Thanks for your reply.

  create a new style on your component and how to bind the color.highlight property to it

  Take a look on

  http://www.jamesward.com/2010/07/30/how-to-define-styles-on-skins-in-Flex-4/

• How to change the tab order of an array of clusters?

  How to change the tab order of an array of clusters?  I have the cluster arranged into a table in the front panel.   The element of the cluster passes horizontal and array element passes vertically.   When I press the tab key, the cursor will move to the item next to the table instead of the next item in the cluster (down to the place overall).

  so you have an array of clusters or cluster and the separate table?

• Change the property of the component with the property name

  Hello

  I have an app that will give a TextArea (id = text) and also a component which, at some point, will try to change the property of the text box "text" to a certain value. In the component, I have two channels, one containing the name of the text box property: 'text' and the other with the future new value of this property. I want to know is how to change in the component, the property of the TextArea component with only to have his name.

  Look at the high line, this kind of watch what I want to do, I know that's not possible, but maybe there's a way you can show me to do what I want

  Example Code:

  -Application:

  < mx:Text id = "text" width = "100%" height = "100%" / >

  < local: Componente id = "Main" / >

  -Component:

  < mx:Button click = "clickhandler" / >

  < mx:Script >
  <! [CDATA]

  private function clickhandler (): void {}
  var to the: String = "text";
  var aux2:String = Hi, "it's the new text";

  parentDocument [text].setPropertyByName(àles) = aux2;

  }

  []] >

  < / mx:Script >

  }

  []] >

  < / mx:Script >

  Thanks for your help

  Sebastián Toro O.

  parentDocument [text] [at the] = aux2;

• Disable the Textfield object when you change the HTML form element

  How to disable a texfield if you change the HTML form element? It must be activated at the creation of the new entry form / record.
  
  Yogesh

  Select 'Read only type of condition' as a value of the element in Expression1 is NOT NULL and in Expression1 put your key primary name of the option to for example P1_EMP_ID

  Kind regards
  Hari

• need to change the language to English - United Kingdom for English - United States

  Just upgraded to FF 7.0.1 and now change appears in the form of books. Need to change the language to English - United Kingdom for English - United States.

  Thank you

  Dennis

  You can check the order of the installed languages:

  • Tools > Options > content > languages > choose

• − a valid license of the MODE of TRIAL will remove this message. See the property keywords of this PDF for more information.

  We recently purchased Adobe Acrobat Pro DC, however, that we were previously using a trial version, we get the message at the bottom of the documents ' MODE of ASSESSMENT − a valid license will remove this message. See the property keywords of this PDF for more information. "Is there a way to prevent the display of this message? The trial version has been removed before the installation of the purchased version.

  [Ask in the correct forum allows... Left the Premiere Pro for Acrobat... MOD]

  OK, the problem is that, even if you have purchased Acrobat Pro, you do not use it. You always use a free replacement product. Not only that, a free product in demo mode.

  When you go to print from the application, you must choose the Adobe PDF, not the PDF Creator printer.

• How can I change the units on a new doc for printing? My preferences are already in inches.

  How can I change the units on a new doc for printing? My preferences are already in inches.

  The new Document dialog box does not facilitate a change of units, although you can type any unit in its fields.

  After the removal of the new Document dialog box, you can right click on a rule to choose different units, or launch the Preferences dialogue box and choose different units in the Panel units and increments. Here, your settings will be saved with the document and should not affect new documents.

• How to change the property 'Border' of a Radio button?

  How to change the property 'Border' of a Radio button?

  TIA,

  -RFH

  What is the point of an option button if you can't see if it is checked or not?

  If you want a tool of indirect approach I suggest you use another thing. Maybe an annotation.

• changing the property index for all indexes of a model (OSDM 3.1 EA1)

  Is it possible to mass change to one of the properties of all the indexes in the model?
  
  For example, I have a data model with large number of indices.
  I created all these indexes with the clause of logging set to 'yes '.
  If I want to change to 'No', is there a way to do it without having to change the properties of each individual index?
  
  Can I use model index here? If Yes, can you please provide details on exactly how to use in this scenario?

  Hello

  The way to do is to change the JOURNALING property on one of the indexes.
  Reopen the Index on the Index Properties dialog box, then click on the button "propagate the properties.

  The dialog box properties of spread, deselect all properties with the exception of the journaling property and use "Select all" in the section 'Objects' of the dialog box to select all indexes updated.

  Index of models are used when the new indexes are created. You can use an Index model in order to have all new index you add logging set to 'no '.

  David

• Changing the property of the presence of several elements failure

  Hello

  I am trying to execute the following code, only one item of a button, click on event, but it fails, with only the section step 2 and SAVE AS executed correctly:

  form.frmMaster.Master1.FileStampButtons.RejectButton::click - (JavaScript, client)

  / * - STEP 1 - disable/hide all buttons except PRINT * /.

  This.Presence = "invisible";

  AcceptButton.presence = "invisible";

  / * - STEP 2 - stamp file exchange to reflect the REJECTED; IOW, delete folder stamp * /.

  PG1.sfCap.sfCapLower.Text25.presence = "invisible";

  PG1.sfCap.sfCapLower.Text26.presence = "invisible";

  PG1.sfCap.sfCapLower.TextDeputy.presence = "invisible";

  PG1.sfCap.sfCapLower.Text28.presence = "invisible";

  PG1.sfCap.sfCapLower.CurrentDate.presence = "invisible";

  PG1.sfCap.sfCapLower.LINE1.presence = "invisible";

  / * Quick-Auto-save form to share drive - Note must register UNDER the Adobe Reader security constraints * /.

  app.execMenuItem ("SaveAs");

  --------------------------------------------------------------------

  The strange thing is that if I turn off the code for STEP 2, and then the code for STEP 1 works fine, while they seem to not be able to coexist.  Is there a limit on the number of items can be manipulated at a time or in a section of the form?  (The RejectButton is in a master page, while the STEP2 items are in the home page).  Thanks for your help.

  Veni-

  Hello

  I had a glance on the form that you send me.

  There are several reasons why my suggested method does not work.

  1. the console displays the errors I don't know how many for lack of references on several pages. This must really be corrected before you add other functions of the form.

  2. you have 2 masterpages in your form, so the code for ()var I = 0 i xfa. host . numPages ; i ++ )... can not be used.

  3. the masterpage with the buttons doesn't occur only once, I suggest you put the buttons directly on this page of body, where you need it and then completely remove the 1st master page. You can then use the same method to hide the buttons you used for the textfields.

  4, pagination settings you chose for the body pages is odd. For all pages except the first body you chose 'go to the next Page. This is not necessary when you want to switch from one to another master page. The following pages can use 'Previous next'.

• Change the value to trigger record data for 1 s sampling frequency of 50 KHz

  Hello

  I have a VI with NI9215 and cDAQ-9178 chassis hardware. The function of the VI came out an instruction to RS232 interface and record 1 second of data every time that the set point is changed.

  The procedure is

  (1) modify the policy to the flow regulator

  (2) wait 2 seconds.

  (3) record of 4 channels for one second to the sampling frequency of 50 KHz.

  At present, the problem is for the first edition of this program, two seconds (rather than) data was saved and corn, the error message 200279.

  

  II. I revised for the second edition of the structure of the producer and the consumer who can increase the speed of the buffer.

  The question is how to configure the trigger to start the backup of data and limit data save for one second whenever the set point value changes.

  

  (1) which edition is best for my application?

  (2) how to trigger the data record?

  (3) how to record only a second of data?

  I also checked this announcement and the elapsed time seems not to work for this case.

  Any help would be greatly appreciated!

  Melody

  Hello

  you have not used properly the nodes property.

  1. replace the case structure in the first loop, with DAQmx features, with a structure of the event. Change the event fires for a worth of control of the setpoint change.

  Edit: as stated in your first post, use the structure of the event, but put inside the while loop.

  2. DO NOT connect error output from the stop command property node. Replace it with a local variable for the stop button.

  Try these and let me know.

• Cannot delete mp4 in windows vista, even after changing the property.

  Hello

  I tried all the methods in the solution given in windows vista to remove off the mp4 files from destop. but each time, he said the necessary authorization.

  I had changed the security for the property for full control rights. but always impossible.

  can you please advice me how to do?

  Hi oscarpooh,

  This only happens with MP4 files?

  The following could prevent you from deleting the file.

  Ø if you do not have the adequate rights for a file or folder, you cannot remove it.

  O if not create you the file, you may not be able to delete it, even if it appears in the Public folder. If this is the case, you must ask the owner of the file to delete.

  O in addition, you cannot remove a file (or the folder that contains it) if the file is currently open in a program. Make sure that the file is not open in any program, and then try again to delete the file.

  Why can't I delete a file or a folder?

  http://Windows.Microsoft.com/en-us/Windows-Vista/why-cant-I-delete-a-file-or-folder

  I suggest you try the following steps:

  Ensure that you do not play the file when you try to remove it.

   

  Step 1: Start the computer in safe mode and then try to remove

  Start the computer in safe mode, to do this, follow the steps below,

  Access the menu advanced startup options by turning on your computer and pressing the button F8 before Windows starts. In the advanced startup options select safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Step 2: The corruption of the file system prevents access to the file

   

  You will not be able to delete the file if the file system is damaged. To resolve this problem, run the Chkdsk utility on the disk volume to correct any errors.

  Run the disk check to repair bad sectors on the hard disk.

  a. Click Start, in the start search bar type cmd, right-click on the command prompt icon in the box programs and then click Run as administrator.

  b. at the command prompt, type chkdsk /f and then press ENTER.

  Now, type chkdsk/r

   Note: CHKDSK would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of DATA loss from that particular area.

  Let us know if it works

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Changing the property update of an attribute of the View object through code

  Hello

  Is there a way to set the property "Updatable" of an attribute in an object of display through code?

  I checked the API documentation for the class of AttributeDef, but there is no method to set it. There is a constant (UPDATEABLE_WHILE_NEW), which gives the current value.

  My needs in short - I have a modifiable ADF Table. Based on a flag, whether or NOT it is FIXED, I need to make a particular column, such that the inputTextBox on this column should appear so that the new rows inserted into the table. Existing users should not be allowed to change the values in this column for all rows.

  I know that it can be controlled by the UPDATABLE property on the attribute in the display object by setting the 'ALL new '.

  Now, I need to control this code during execution.

  Please let me know on OE for that.

  JDev version: 11.1.2.3

  Thank you.

  the method you are looking for is available in the AttributeDefImpl class that you can get from the EntityImpl as

  this.mDefinitionObject.getAttributeDefImpl("YOUR_ATTRIBUTE_NAME").setUpdateableFlag(AttributeDef.UPDATEABLE_WHILE_NEW);
  

  Timo