Change the guest of messageTextInput based on event of PPR

Similar Questions

• change the settings of export based on photo

  Hi all, I searched a lot, without finding an answer to this task: I need to change the settings of export based on unique photo, for example settings megapixels resize factor rating function.

  I know that export settings can be changed with updateExportSettings but it is global for all photos of.

  I also know that in the Export Department, I can define a processRenderedPhotos function in the loop inside the session: "renditions", I can do additional actions on each photo, but after having been made.

  I know finally I can define a filter Service where to put the postProcessRenderedPhotos function, but it is a post-processing work so after the photo was made and registered...

  Then... How do I? Where to put code to change exportSettings for each photo based on a feature of the photo?
  Thanks a lot for your help

  Julian

  How to access every photo in the function "filterSettings = function (renditionToSatisfy, exportSettings)"...? As I said, I need customization of the exportSettings based on characteristics of the photo, so I need to access the photo associated with a current rendering: how?

  The 'renditionToSatisfy' argument is class LrExportRendition, and renditionToSatisfy.photo gives the restored LrPhoto.

• Symbols - how to change the fill color to a mouse event?

  I'm trying to convert HTML Flash animations.

  I have some problems with the symbols of the Edge. As a test, if I create a new symbol of circle I draw and call that the new 'Test' symbol, I then try to change the fill color in a scoring event.

  I tried this:

  Enter the code to be run when the mouse points to the object

  SYM. $("Test") .css ("background-color", "red");

  That, in fact, change the "background color", but NOT the fill color of my symbol. See the example below.

  So then how should I address the symbol 'Test' if I want to change the FILL color is an event like the hover?

  TIA!

  Use:

  sym.getSymbol("Test").$("Ellipse").css ("background-color", "red");

  where "Ellipse" is the element of circle inside the symbol

  HTH,

  Vivekuma

• change the color of line based on the value of column 5 Apex in the classic report

  Version of the apex 5.0.0.00.31

  Standard universal theme

  Page theme default template

  Classic report

  Foldable report template

  Hello

  I know this question has been asked several times here, but I'm working on 5 Apex and need to know the correct way to do it in this version.

  I need to change the color of the text of the entire line (no background color) based on the value in one of the columns of the classic report. I have just two conditions, if the value of column = Yes, color should be red, otherwise it must be green.

  I am new to jscript and css, so appreciate if someone can tell me the solution with steps.

  I have already checked this link that changes the value of the column, need to do something similar to the whole line.

  https://tylermuth.WordPress.com/2007/12/01/conditional-column-formatting-in-apex/

  Hi coolmaddy007-Oracle,.

  Here's an example set up on the apex.oracle.com according to the specifications you gave: https://apex.oracle.com/pls/apex/f?p=35467:1

  Version of the apex 5.0.0.00.31

  Standard universal theme

  Page theme default template

  Classic report

  Foldable report template

  Here is how it is done:

  Create a dynamic action with the following specifications:

  Name: Give the appropriate name

  Event: After refresh

  Selection type: region

  Region: select your region classic report

  Condition: No strings attached

  Action: Run the JavaScript Code

  Fire on loading the Page: Yes

  Code:

  $('td[headers="JOB"]').each(function() {
    if ( $(this).text() === 'MANAGER' ) {
      $(this).closest('tr').find('td').css({"color":"red"});
    }
    if ( $(this).text() === 'SALESMAN' ) {
      $(this).closest('tr').find('td').css({"color":"green"});
    }
    if ( $(this).text() === 'CLERK' ) {
      $(this).closest('tr').find('td').css({"color":"blue"});
    }
  });
  

  NOTE: Download the selector appropriate for your knowledge $('td[headers="JOB"]') case using firebug/browser development tools.

  Items concerned: leave blank.

  PS: Changed the example to change the color of text instead of the background color.

  I hope this helps!

  Kind regards

  Kiran

• Change the background fill color based on Radio button selections

  Hello

  I am very new script in LC, so I hit a wall on my last form. I am creating a form with a scale of 'leikert-like', however one of the stipulations (from my boss) is in this context of buttons are to be filled based radio which button is selected.

  For example, Question 1 has 4 radio buttons to choose: poor, fair, good, great. If the person completing the form selects poor, I wish the poor to fill background color. If someone chooses right, I would like to than this background color to be filled, as well as the background of the poor. Good selection would fill the colors of good, fair and poor; and selecting the big would fill the four colors.

  Someone has ideas of how / if possible? In my first tests, I got the button itself to change the colors, but not the background fill (which can be changed manually on the border palette).

  Any ideas would be much appreciated. Thank you!

  Aaron

  Here is the code that you can use in the event of modification of the ExclusionGroup (title default RadioButtonList) object. It is the parent of each individual option button object.

  for (var i=0;i
  This also assumes that the value of each option button is sequentially numbered from 1 to however many boxes option you have.
  Now, here's the thing. I'm assuming that each radio button has a different color. You might code for the colors yourself in JavaScript, but I manually chose the colors through UI Designers. Once all the colors of radio buttons have been defined, select a radio button and go see > XML Source. Where we see the element, add the presence of the attribute = "hidden". Do this for each option button. Here's what I mean:
  
                    
                    
                       
                        
                          
                       
                    
                    
  
  Kyle
  		   

• Cannot change the guest account to admin account type

  Original Tilte: can not replace access admin comments

  Hi I have some problems with users. The guest account has admin access, I tried to change it, but it won't work. I want comments removed admin.
  Here is a video that I'm having the problem.

  http://www.YouTube.com/watch?v=mYzgBKwSERY

  Hello
  1. don't you make changes on the computer?
  2. what happens when you try to delete the guest account administrator rights?
  3. do you receive any error messages?

  Step 1: Perform a virus scan by using the Microsoft safety scanner
  Microsoft safety scanner
  http://www.microsoft.com/security/scanner/en-us/default.aspx.
  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
  Step 2: Remove administrative rights
  a. Click Start, type user accounts and press enter
  b. click on the guest account, then click on change the type of account and change the account type.

• Cannot change the guest account group

  Long story short.  The guest account is somehow in the Administrators group.

  I use Windows Vista Home.

  When I am logged into the guest account and I look under the name he said administrator.  I'm going to change the type of account, it shows that it is in the standard group.  It won't let me even change for the management group.  It is in the Administrators group or what?  READ MORE that it gets better.

  When I'm on the command line and I type net user comments he says that membership in the local Administrators group.  Now, here's what I don't understand.  I do net localgroup guests comments / add and it will add to the guests group, and it is then in the customers and group administrators.  I can then do net localgroup guests comments/delete and it deletes it.  Now I CANNOT net localgroup administrators/delete comments because he says that it is not within the group, BUT if I net localgroup administrators comments / add that also says that he cannot do it because it's already in the Group?  That continues.  A I royally mess up something or it's a certain type of problem?  Please help me.  Thank you

  Hello

   

  Do the following and check.

   

  Check in the user management

  a. Click Start, type "Edit users and local groups.
  b. click on 'Users', which is located on the left side
  c. right-click Guest, and then select Properties.
  d. go to the Member tab, select the administrator group, and then click on remove.

   

  It will be useful.

   

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Change the guest account to administer

  I created a new user to keep my stuff. I'm changing to an administrator account (and Yes, I already have an administrator account) to a guest account, so I can protect it with a password and give it a name. The only problem is that when I try to change it, it does nothing. Same thing for the name. When I try to change it when you are connected to the original administrator account to try to change the comments, I even not give me the option to change when "manage another account." Please help me.

  Hello

  See this link:

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/c807c57c-2ef4-4e9b-A92D-ab72df8c69d2

  It will be useful.

• Installed NEWSid, restarted, now I am obliged in the guest account and can't make admin account or change the guest account.

  I had to run NEWSid due to software, I bought and installed (Stardock Objectdock) and required me to restart. Upon reboot, I had the guest account and couldn't change little matter what I tried. Here are things I tried.

  (1) goes UAC and by creating an account admin, but when I put a name in the name field, it tells me I have the invalid text when I do.

  2) restart in safe mode to create the Admin account or change the parameters of control of the accounts in this way and the same thing happens as a #1.

  Reinstall Windows Vista Home Basic 64-Bit 3) compared to the original, which does nothing to help.

  After research, I learned that using NEWSid with Vista causes this problem a lot, but the only solution I found is to use a recovery system disk (the only disc that came with my purchase of the computer has been the Cyberpower restore disc that contains only Windows Vista Home Basic 64-Bit.

  I am at a loss what to do, what I'm in the guest account and can't get out. System Restore did nothing as well until I reinstalled Vista. When I tried to run the system restore, it told me the Volume Shadow service was not working, but as part of the services, it has been set to automatic.

  Hi Rizzano,

   

  Welcome to Microsoft Answers Forums.

  If you are unable to connect to the administrator account, you will be unable to make changes on the computer by using the guest account.

  I think you did an in place upgrade which means it replaces the file system and makes no changes to the user account.

  You try to activate the construction in the administrator account and check if it works.

  If you are able to connect on windows first try to create a new administrator account.

  To activate the built-in Administrator account, follow these steps:

  
  1. click Startand type cmd in the Search boxof start.
  2. in the list of search results, right-click Guest, and then click run as administrator.
  3. When you are prompted by user account control, click continue.
  4. at the command prompt, type net user administrator / Active: Yesand then press ENTER.
  5. type net user administrator , , and then press ENTER.
  Note: Please replace the tag with passwords which you want to set for the administrator account.
  6. type exitand press ENTER.
  7 log off the current user account.

  HOW to: Enable the build-in the administrator account in Windows Vista

  http://support.Microsoft.com/kb/555910

   

  If the steps above does not resolve the question suggest that you try to restore the system from the mode or using the disk safe.

  To use the Windows recovery environment, you must have the Windows Vista or Windows 7 installation disc. To start the Windows recovery environment, follow these steps:

  1.	Insert the installation disc into the disc drive, and then start the computer.
  2.	Press a key when you are prompted.
  3.	Select a language, time and currency and keyboard or input method, and then click on Next.
  4.	Click on your computer repair.
  5.	In the System Recovery Options dialog box, click the operating system you want to repair, and then click on Next.

  In the System Recovery Options dialog box, click System Restore to restore the operating system to the restore point created before the problem occurred.

  Hope this information is useful.

  Let me know if it worked.

  All the best!

  Thanks and greetings

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Change the contents of cell based selector QML property in container QML

  I have a selector in which I want to have the text in each cell selector display in one of two ways, depending on the State of another control in the QML that surrounds the selector and the other controls.

  My first attempt used only a QML based Picker with PickerItemComponents.  The PickerItemComponents had their text property set to the return value of a utility JS function that takes two arguments - the PickerItemData extracted string and an indicator a boolean to indicate the JS function how to change the string returned to display in the cell of the selector.

  When I try to spend a QML property set on the selector for JS calls in the PickerItemComponents, I get an error log saying:

  "" ReferenceError: can't find variable: ".

  I assume here that a PickerItemComponent is missing the context of the selector containing the same way that a ListItemComponent is not the context of the parent company of the ListView.  However the docs of PickerItemComponent do not seem to set all of the properties that I could use similiarly to the ListItem.view property, which is ListItemComponent.  (In fact, the PickerItemComponent docs don't same spec property of pickerItemData - it only appears in example code).

  So the next thing I plan extends the C++ PickerProvider class.  However, it seems that this class inherits QObject, not so I don't know if once I go to the trouble to write and expose my own version, I'll be able to finally get the QML of the container including down in the correct callback inside my custom PickerProvider.

  Anyone who has been in this way, please share your experience/solution you are able - thanks!

  You can try @simon_hain replica of this thread
  http://supportforums.BlackBerry.com/T5/native-development/using-QProperty-for-a-label-inside-list-VI...

• Script to change the presence of objects based on the range of amount

  Hello

  Is it possible to change a presence of objects (a field or a subtitle), from the amount range entered in a numeric field?

  For example:

  -The amount of entered number field is a range between 1 and 49 999, then "Signature subtitle 1" is displayed.

  -The amount of entered number field is a range between 50,000 and 250 000, then 'Signature subtitle 2' is displayed.

  Etc.

  Any advice for this script would be appreciated.

  Thank you!

  Hello

  Try something like this JavaScript in the event of your field digital output (you probably need to change the name of your objects in shape, SignatureSubhead1 and SignatureSubhead2)

  switch (true)
  {
   case this.rawValue >= 1 && this.rawValue <= 49999:
    SignatureSubhead1.presence = "visible";
    SignatureSubhead2.presence = "hidden";
    break;
   case this.rawValue >= 50000 && this.rawValue <= 250000:
    SignatureSubhead1.presence = "hidden";
    SignatureSubhead2.presence = "visible";
    break;
   default:
    SignatureSubhead1.presence = "hidden";
    SignatureSubhead2.presence = "hidden";
  }
  

  Concerning

  Bruce

• Script to change the selection of combo based on numerical values box is entered in a text box

  I implemented a form of feedback to student and I'm looking for how to refine the process for the user. Please see the image below. As you can see that the form has individual learning, each of which has three statements of "feedback". These are currently the combo boxes with predefined statements selected by the user in the menu dropdown. These statements are connected digitally to our marking scheme that is if the feedback statement uses the word "limited", it matches with a score of 20-39 on our scale of correction. If she uses the word 'excellent', he corresponded with a score of 70-100.

  Limited 20 - 39

  40 - 49 adequate

  good 50-59

  very good 60-69

  excellent 70-100

  Currently, the user enters the brand in the small text box size in the right corner of the relevant learning outcomes. The user must then manually select the corresponding instructions of feedback from the drop-down list box. Which is quite tedious. Here's the thing:

  Most of the time statements all match the digital brand, i.e. If the student received a score of 55, then feedback statements would usually all be in the 'good' category: '.. '. good quality research... «, ».. good analysis... «, ».. good research management... ". It would be a great time saver if the statements could be scripted to react to the numbers in the text box. For example, when the user types in a notes 50-59 feedback instructions themselves define automatically to all be '... good... ". There's still a thing.

  It is important that the user has the possibility to change the declarations of individual feedback if necessary. that is a mark of 58 may require two statements of feedback in the "good" and the other in the 'very good' category: '.. '. good quality research... «, ».. good analysis...', '... VERY good orientation of the research... ". The user must therefore always the option to bypass the automatic selection if necessary.

  It's beyond my Basic scripting capabilities, but I wonder if anyone can break this problem? Your help would be much appreciated.

  

  Thank you

  Charlie

  Hello

  I create a simple sample here - https://acrobat.com/#d=FFhf7MQtKrH5iickDJBBxw

  I used the blur of the text field event so that the code is triggered when you tab to or click elsewhere in the form, the code can easily be moved.

  I named the fields

  Text1

  Dropdown1

  Dropdown2

  Dropdown3

  and these will have to be renamed according to the names of your fields.

  Hope this helps

  Malcolm

• Change the color of line based on condition.

  Hello

  Am using jdeveloper 11.1.1.6.0

  I slipped and fell by xxxVO as an array of af in my jspx page.

  This vo has the attribute of gravity which is a component to select only one option.

  I need to change the color line if gravity = 1.

  How can I achieve this.

  Kind regards

  Prasad K T,.

  9840021070.

  Refer

  ADF: color change of the value of the column according to the requirement

• Can you change the color of guides based on the layer you on that?

  I want to change the colors of the guides to differentiate the grids on different layers. is this possible?

  Martyn,

  I'm afraid she's one for a feature request.

  https://www.Adobe.com/cfusion/mmForm/index.cfm?name=wishform

• Change the color of cell based on the first character of the value of the field

  Inside of a RTF model, I have a field called I_DESCRIPTION.
  
  If the first character of the value of I_DESCRIPTION is 'E' then I want the table cell to be red. Otherwise, I want it to be blue.
  
  I thought I'd be able to use the following type of code:
  

  <?xdoxslt:ifelse(substring(I_DESCRIPTION,1,1)='E', 'IT IS E', 'Not E')?>

  The above works. The only problem is, I don't know how to change the above, so that instead of print 'IT IS E' or 'NOT E' it changes the color of the cell in the table in red or blue.
  
  I guess I have to put something like the following in the second and the third argument to the ifelse() function:
  

  <?attribute@incontext:background-color;'#FF0000'?>

  But after much trying, I can't work on everything at is how this fits.
  
  Ideas or suggestions appreciated.
  
  Thank you
  Andy

  Hi Andy,.

  You can try this:

  1. in the cell where you view the description field, insert a form of conditional formatting field and use the following code: Red

  You will need to check the condition of other another field of form CF: Blue

  Hope this helps.
  Thank you!