Change the HBA speed with the management console

Similar Questions

• Why can't I change the management VLAN?

  This will sound like a newb question (but I'm used to COS not MISTLETOE), but how to change the vlan management on a SLM2048 and still have access to the GUI switch? The steps I use:

  (1) create a vlan (say vlan 2) / save the changes

  (2) add a non-tagging port (say, g2) to change vlan / save

  (3) change the vlan management to the vlan 2 in gui/save changes

  (4) physically to move my pc on port connection of vlan 2 (g2)

  (5) delete my cache arp (arp - d)

  (6) the switch switch in. ping or log not rspond pings 8 ^)

  What in the world could be missing (outside a few screws)?

  Thanks much for any help!

  
  This is going to sound like a newb question (but I'm used to COS not the GUI), but how do you change the managment vlan on a SLM2048 and still have access to the switch GUI?? The steps I'm using:
  1) create a vlan (say vlan 2)/save changes
  2) add a non-tagging port (say, g2) to the vlan/save changes
  3) change the management vlan to vlan 2 in the gui/save changes
  4) physically move my pc connection to the vlan 2 port (g2)
  5) delete my arp cache (arp -d)
  6) ping the switch or log in. switch doesn't rspond to pings 8^(
  What in the world could I be missing (besides a few screws)??
  Thanks very much for any help!
  
  

  Hello

  Check out the link to change the management vlan in SLM2048 below

  http://www.Cisco.com/en/us/docs/switches/LAN/csbss/slm2024/release/notes/SLM2024_SLM2048_RN_V1-0-1.PDF

  Hope to help!

  Ganesh.H

  Don't forget to note the useful message

• Unable to connect to the management console essbase server,

  Hi all..

  After having managed completely the installation and configuration of essbase 11.1.2.3 iam unable to connect to the management console essbase server,

  and also, when connecting to the oracle database, he says 'not found oracle. "

  Essbase 11.1.2.3 is installed in windows server 2008 R1.

  kindly help us.

  OK so Essbase is now running, so you should be able to test a connection through Maxl, run c:\Oracle\Middleware\user_projects\epmsystem1\EssbaseServer\essbaseserver1\bin\startMaxl.bat

  e.g. login password admin on ServerName.

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• -restart via the management console - stopped printer spooler continues to stop

  Printer Spooler which suddenly stopped, restart spooler system still does not - which started through the services management console - to which starts and stops - is unable to run? Help!

  http://support.Microsoft.com/kb/2000007/en-us

  Solve printing problems by resetting the print spooler

  Try the above.

  See you soon.

  Mick Murphy - Microsoft partner

• Is there a way to change the management IP in the graphical interface of ACS

  Hello

  I'm changing the IP management 5.2 ACS in the GUI, but could not find it.

  Is it possible to change the IP address in the ACS GUI?

  Thank you

  -Alejin

  Hello Alejin,

  You can't change the IP address in the GUI. GBA is an application that move on a device. You must change the IP address to the device level, ssh to your device and connection.

  then configure terminal

  0 gigabit interface

  IP [ip address] [your netmask]

  output

  output

  write memory

  concerning

  Alex

• How to change the HTTPS Console Weblogic admin port

  Hello
  
  
  I want to change my HTTPS Console port which was default port 7799 to other ports and also weblogic admin port 7101 to another port.
  How we change that. Thank you
  
  
  Thank you
  Sachin Bhadauria

  you need to change the powers of oversight for the EMGC_GCDomain reflect the new administration server port.
  Go to the target-> Middleware-> EMGC_Domain
  Select Configuration of the target-> supervision of the identification information in the drop farm
  Change the Port field
  Return to the menu drop-down firm and select Refresh WebLogic Domain-> Add targets to update
  The objectives of OHS and Server Admin should now appear in the console. I checked on my test site.

• How to open the management console in GR 11, 2 browser?

  Hi all
  
  I installed 11 GR 2 database. I unfortunately do not care about the port while install as I thought 1521 will be the default port. But when I try to open the administration console using the url http://localhost:1521 / em / I get the 404 error.
  
  Kindly help me on the following:
  
  (1) where to find the port information
  
  (2) is the url I typed the correct url to open the administration console (if 1521 is the port)
  
  Thank you

  The creation - repository and dbconsole - command is

  EMCA - config dbcontrol db-rest create

  Werner

• Error Control Manager service in the management console "access denied." How to remedy the situation?

  Event type: error
  Event source: Service Control Manager
  Event category: no
  Event ID: 7006
  Date: 15/09/2012
  Time: 20:59:56
  User: n/a
  Computer: RICHARD-PJG4Q7K
  Description:
  The ScRegSetValueExW call failed for ImagePath with the following error:
  Access is denied.

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  Hello

  The question you posted would be better suited in the MSDN Forums. I would recommend posting your query in the MSDN Forums

  MSDN forums

  http://social.msdn.Microsoft.com/forums/en-us/netfxbcl

• How to change the Manager from exploitation to Version 8?

  Hello

  We just upgraded our host ESX, ESXi 5 lately.  When we are trying to upgrade the 2 VMs for Operation Manager system has failed. Just wondering if there is another version of Operations Manager can be unloaded or is it possible to upgrade?

  Thank you

  I assume you mean updating the virtual hardware version when you talk about version 8!

  In fact you don't want to do it, but rather to make an upgrade using VMware vCenter operations downloads

  André

• What are the tasks we can perform by using Component Services in the Microsoft Management Console?

  Original title: use MMC

  Can someone enlighten me on component services, found in the administrative tools, including the management console folder. Is their anything that can be done by someone who has no knowledge on this subject, extensive Windows, I use XP (SP3) thank you.

  Hi ratchet.

  Microsoft Management Console (MMC) lets system administrators create much more flexible user interfaces and customize administration tools.

  See this link for the tasks that we can perform using Component Services in the Microsoft Management console.

  With Component Services, administrators can deploy and administer service applications of components through a graphical user interface or automate administrative tasks using a programming or scripting language. Software developers can use Component Services to visually configure routine component and behavior of the application, such as security and participation in transactions, and to integrate components into Component Services applications.

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_start_mmc.mspx?mfr=true

  Also check out this link:

  Using the Microsoft Management Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_start_mmc.mspx?mfr=true

• Need ip vm info to change the type of network adapter

  Hello

  I need to change the type of network adapter on the virtual machines, but to do this I will need to get all relevant intellectual property information. This is because the server returns to DHCP afer restart, after the change of the NIC with the command below. I've seen various commands, but the simplest works only with 32-bit powercli which I did not present (or what I want). Does anyone do this?

  Thank you

  Get - vm servername | get-networkadapter | set-networkadapter -type 'Vmxnet3' -confirm:$false

  PowerGui FAQ.

  Q: how to start the administration Console in 32-bit mode on a 64 bit system?

  When you first install PowerGUI, on the last page of the installation there is an option to open the administration Console.  This option will open the default version of the administration Console.  The default version is 64-bit on 64-bit computers, or the 32-bit version on 32-bit computers.  Actually, on computers 32 bit, there is only one version, 32-bit version.  The PowerPacks to use a feature that is only available in mode 32 bits, so you can open the administration Console in this mode to use these PowerPacks.  To do this, you have a few options:

  1. from the start menu, open the programs PowerGUI, then x 86 folders and click the shortcut of PowerGUI x 86 to open the Management Console in 32-bit mode.

  2. in PowerShell, run the following command: & ${env:ProgramFiles(x86)} \PowerGUI\AdminConsole_x86.exe }

  3. in cmd.exe, run the following command: "% programfiles(x86) \PowerGUI\AdminConsole_x86.exe"

  Note that you can have only one instance of the Console of administration open at a time, so if you have already opened the Management Console in 64-bit mode, you need to close this window before you open the Management Console in 32-bit mode.  Also note that you may need to wait a few seconds after closing the window of the Management Console for the process to stop completely, how you can re - open it in 32-bit mode.

• Satellite L450D - cannot change the brightness of the screen more

  I was wondering if someone could help me. All of a sudden, I noticed that I can't change the brightness on my laptop what so ever. I don't know how long it has been like that but its pretty boring.

  I am currently running Windows 7 Home premium on the laptop just for information. I tried to change in power management and try to change the management of the real power, and pressing fn + f6/f7

  Any help would be appreciated with gratitude

  Brandon

  Hi telford_boi,

  Can you notice other work of Fn keys or just the screen brightness doesn't work more?

  In your case I would try reinstalling the package of value added. It controls the FN keys you want to say and all these special functions. You can download it here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Before installing the latest version, delete the old first, please.

• Change the ESXi host IP address

  Hello

  I have the following Setup for vSphere 4.1 and you must change the subnet:

  1 - host 1.0.0.1

  Host 2: 1.0.0.2

  Home 3 - 1.0.0.3

  vCenter - 1.0.0.99

  I need to move all my guests and my vCenter to a new subnet:

  1 - host 1.0.0.1

  Host 2: 1.0.0.2

  Home 3 - 1.0.0.3

  vCenter - 1.0.0.99

  I want to try a host first of so I moved all my virtual machines from the host 3.

  I can go on the pages of Configuration/network host and select Properties on the virtual switch containing VMkernel port of my network management - from there it seems that I can just change the network IP management settings. However, it is the right way to do it? I thought that the best thing to do is the following:

  1 disconnect the host vCenter

  2. connecting to the host directly using vSphere client

  3. change the IP address of the host management network

  4 reconnect to the host (using the new IP address of the host) using vCenter

  Should I switch to maintenance mode?

  The same operation can be performed on a host running VMs?

  Thank you

  Change the management IP has no impact on the virtual machines running on this host. To make a change of this nature, I often disable HA (either completely, or uncheck "Enable Host Monitoring" on the segment of HA configuration). This will ensure that the interruption in the availability of management so that the changes of property intellectual fires any sort of isolation HA event.

  HA, you should be able to make the change from the vSphere client attached to the host or vCenter. Just make sure that you have access to the consoles so you fubar the vSwitch and needed fix through tech support mode or the DCUI.

  You are afraid to have virtual machines on the host, if not in maintenance mode to evacuate VMs. It is not necessary.

  vCenter relies heavily on DNS, make sure that the new IP address reflects the input host DNS.

• Can't remove the Manager field in AD by IOM 9.1

  Hello
  I'm removing the Manager for a user in the AD profile without changing the Manager ID in the profile of the IOM. I get error when I try to change the attribute Manager replacing a string NULL below.
  
  LDAP: code error 21-00000057: LdapErr: IDDM-OC090B8A, comment: error in the conversion of attribute operation, data 0, v1db1)
  
  
  I get the same error, even if I'm changing the Manager field in AD without changing the Manager field in the IOM.
  
  I try with the code below.
  
  BasicAttributes a = new BasicAttributes();
  at.put("Manager","");
  context.modifyAttribute(UserDN,2,at);
  
  What could be the reason for this error? Please help guys.
  
  Published by: User_OIM on December 27, 2012 19:06

  Create so first BasicAttribute object and then pass it inside the method could

  BasicAttributes a = new BasicAttributes();
  BasicAttribute ba = new BasicAttribute("manager");
  at.put (BA);
  context.modifyAttribute(UserDN,3,at);

• Change the type of jumpered to host-only network

  Hi all

  I have vmware server 2.  I initially installed my vm in bridged mode server but know that I would change to host only if it is possible? Can you someone advise please?

  Hello

  Turn off the virtual machine, add card only the host of the management console, remove the bridge card, turn on the virtual machine. It should work.

  J.