Change the IP address of the SQL of Virtual Center Server

Similar Questions

• Change the SQL report to Intractive report

  Dear friend
  
  
  I created the SQL report.
  
  Could you tell me please, there is a way to change the SQL report to Intractive report.
  
  How can I do that.
  
  Thank you

  Under the Definition of the region of the report; look over to the right margin and you will see interactive report-migrate under tasks .

  The f

• Changing the SQL source region according to requirement

  I have a region of reports that shows the results of some SQL codes. According to the value of a variable to the page I need to run a little different from SQL to get my results. Right now I use 5 different regions and display one suitable and hide others, according to the value of the variable on the page.
  
  It's a bit messy and I'm looking for a better way to do it. Is it possible to use a single region and change the SQL used as the source of the region after checking my page variable? for example something like this for the source of the region:

  IF :report_type = 1 THEN
  
  SELECT col1, col2, col3 from table1;
  
  ELSEIF :report_type = 2 THEN
  
  SELECT col1, col2, col3 from table2;
  
  ELSEIF :report_type = 2 THEN
  
  SELECT col1, col2, col3 from table3;
  
  END IF;

  .. or something similar?
  
  Or is there an even easier way to do it?

  Hello

  for "normal" (non-interactive reports), you can provide a block plsql returning a sql query
  as the source of report...

  declare
  v_sql varchar2 (4000);
  Start
  IF: report_type = 1 THEN
  v_sql: = "SELECT col1, col2, col3 from table1";
  ELSE IF: report_type = 2 THEN
  v_sql: = "SELECT col1, col2, col3 from table2";
  ELSE IF: report_type = 2 THEN
  v_sql: = "SELECT col1, col2, col3 from table3";
  END IF;
  Return v_sql;
  end;

  as said - this does not work with interactive reports...

  Best regards

  Carsten-

• Change the number of virtual processors on VM

  Hello

  I have ESXi 4.0 update1 and a number of virtual machines on it.

  As you may know, there is a warning saying "Change in the number of virtual processors after installation of operating system guest can make your virtual machine unstable." When you open the properties of the VM to change hardware settings.

  However, I have a few virtual machines that I change the number of viftual UC sometimes (increase and decrease) and haven't noticed any problems.

  All my VMs are Microsoft Windows 2003/2008/XPs.

  Someone know that changing the number of virtual processors has no negative impact or not?

  I appreciate your help.

  Depending on the configuration of your operating system, this can be harmful. WIndows not the component of ACPI, which must always be configured as uni or multi processor (windows detects usually it and change automatically, I really don't know the trigger to make it not happen, but sometimes it isn't). Also for example, Linux kernel can be compiled without SMP (multi processor support), in order to have several processors can cause the virtual machine to run slowly.

  You may not notice any changes in your virtual machines, and I really think that you are not running on SMP issues. But if you want to check in the Device Manager, you can check if your ACPI is United or multi processor and change it properly.

  Marcelo Soares

  VMWare Certified Professional 310/410

  Master virtualization technology

  Globant Argentina

  Review the allocation of points for "useful" or "right" answers.

• Installation of SQL Server for the virtual Center Server

  Hi all

  We bought 16 x 2 for ESX server CPU licenses.  So, I will prepare a database of virtual server of the Management Center 16 guests. As SQL Server 2005 Express is installed during installation of Virtual Center Server but VMware is recommended for use only for 5 guests.

  So I would like to prepare a database of SQL for VC server, please help me how to make the database to the virtual Center Server. Are there special tables, configuration, permissions. I have no experience with databases then how should I go with it. Is there a guide for it. The ESX Server installation guide explains only create ODBC connections.

  Please help me with this I would be very obliged.

  I know that the procedure is restrited 2 steps (1 and 2) on page 68, but you need to install and configure SQL Server for your business standard (I guess asking the C: or D: and data/newspapers on E :). I'm not going to explain better how to install SQL Server on a server. For the SQL Server database:

  • Step 1: you create a database storing the files on the right disk (with at least 30 GB) with a default database size to the size defined by the "Calculator" (value of + 15% on the line of your choice statistical level).

  • Step 2: On your Microsoft SQL Server, create a user of SQL Server database with the database rights of operator (DBO). The default database for the DBO User is that you defined in step 1. Make sure the database user has a role of sysadmin server or the role of database db_ownerfixed on the VirtualCenter database and the MSDB database. The role db_owner on the MSDB database is required for the installation and upgradeonly. This role can be removed after installation or upgrade process iscompleted.

  The user must be created for your standard business as service account (password never expires) with a long and complex password.

  Other steps in the document are for the ODBC connection.

  Creating the tables is made during the installation of VC. Nothing to do. A characteristic is not to stop the SQL Server agent because some tasks are scheduled in the database to 'compact' statistics.

  For the record, the database is upgraded when installing patches VC creating of new tables, updating of data type or...

• Error 1067 by starting the VMware Virtual Center Server service after the upgrade to VCenter 4.1

  I've started with VCenter 4.0 update online success in 4.1u1

  but now I can not start the service with Error 1067 by starting the VMware Virtual Center Server service.

  I did the upgrade online in VCenter 4.1u1 with this iso file VMware-VIMSetup-all - 4.1.0 - 345042.iso and now the entire production is declining.

  I use SQL Server 2005 32-bit as the database.

  Any kind of help would be greatly appreciated please?

  I guess it's all true by:

  http://KB.VMware.com/kb/1022104

  http://www.VMware.com/support/vSphere4/doc/vsp_vc41_u1_rel_notes.html

  And what exactly is a failure, is the DB on a different server or living on the vCenter Server?

• Installation of licenses on the virtual Center Server

  I am very new to VMWare, so pardon my ignorance please. I had virtual center server setup and working correctly with my license, but I got to the virtual server installation to a new server Center, and now I have problems making my license server.  I have the license file, but I don't know how to proceed, can someone help?

  Thanks in advance,

  Shannon

  Have you bought your production licenses and their centralized in a file single licens?

  With David link, you can also watch this one.

  http://www.VMware.com/products/VI/buy.html

• change the SQL license without reinstalling the product?

  We are running out of SQL Server 2005 Workgroup Edition with merge replication, and we just hit a limit of product that we ignore to 25 subscriptions.
  Question: Can we change the Standard Ed license or remove this restriction somehow without having to re - install the product?

  Hello.

   
  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT audience Pro on MSDN. Please post your question in the MSDN forum.
  http://social.msdn.Microsoft.com/forums/en/category/SQLServer/
   

• Monitoring stops working after changing the SQL Service account

  I have the Foglight for SQL Server cartridge. I recently changed the service account that is running the SQL Server engine and SQL Server Agent from a local account to a domain account. Everything works fine on the SQL Server side.

  No configuration changes have been made on the Foglight end, and none should be necessary Foglight is configured to use a separate service for SQL account both OS level followed. This account has always been in the local "Administrators" Group on the database server, as well as a "sysadmin" on the side of SQL Server server role. If I 'validate connectivity' within Foglight to that server, it shows that the connection is correct. I tried to remove the monitoring officer and recreation, but yet to see errors in the attached screenshot. Has anyone meet a similar problem?

  Although I couldn't find any indication that the agents were locked, I tried to release them anyway. That seemed to do the trick!

  This can be found here:

  Databases-> Dashboard Support-> Support of databases-> release agents

• Tuning sql of a product to the seller without changing the sql statement

  Hello
  
  We have a product of the provider that generates the SQL statement. For a query, we get the answer in 15 seconds. But users are asking if we can bring it back to 5 seconds. Limitation is the query can not be changed. He used about 10 to 12 tables and bit complex query.
  
  What kind of options could be evaluated if we are to improve the performance of a query (not sure if she could never be reduced to 5 seconds)
  without making any change to the query.
  
  Database Version: Oracle 10.2.0.4
  
  Thank you
  Delphine

  Hello

  http://www.Oracle-base.com/articles/10G/AutomaticSQLTuning10g.php

  your software is enterprise or standard?

  Tuning Pack & pack diagnosis are extra cost option with the standard edition.

  & the useful note * automatic SQL Tuning - SQL [271196.1 ID] profiles *.

  http://www.Oracle.com/us/corporate/pricing/technology-price-list-070617.PDF

  Thank you

  Published by: CKPT November 5, 2010 11:12

• Change the SQL syntax by sys_context

  Hi all
  
  When the user-defined function runs "select * of tb1, tb2 where tb1.a = tb2.a ' application.but web database convert in" select / * + use_nl (tb1, tb2) * / * of tb1, tb2 where tb1.a = tb2.a and then runs the query, I think by sys_context and DBMS_SQL, DBMS_SESSION we can implent it, please provide steps to implement...»
  
  
  Thank you
  VIJAY

  What version of Oracle?

  Depending on the version, you can look at dbms_advanced_rewrite, but you are not using bind variables?

  If you do not bind variables and the application issues the sql directly and this list can vary in length or you do not use cursor sharing, then you many options.

  You could make the application select view and have your Board in the view definition.

  Published by: dombrooks on October 23, 2009 10:30

• CHANGE the SEQUENCE on a busy server translates into very high unexpected values

  Our sequence was 782,393,232, or so, when I came it up through 30 000. Here are the commands I used:
  
  change the sequence of OUR_SEQ increment in 30000;
  Select double OUR_SEQ.nextval;
  change the sequence of OUR_SEQ increment in 1;
  commit;
  
  When I questioned nextval in the sequence, a few minutes later, he had climbed up to more 8 billion! I have reset quickly up to 783 million or more, and it behaved correctly after that. I saw some posts on the net that infer that the reset sequence is heavily used can cause "unpredictable." Everyone knows this or y at - it a bug known?
  
  I am running:
  
  Oracle Database 10 g Enterprise Edition Release 10.2.0.4.0 - 64 bit, RAC system.
  PL/SQL Release 10.2.0.4.0 - Production
  "CORE 10.2.0.4.0 Production."
  AMT for Linux: release 10.2.0.4.0 - Production
  NLSRTL Version 10.2.0.4.0 - Production

  Sven,

  I'm not sure I understand what you're clarifying...

  In a CCR cluster, a sequence with a cache has a separate cache in each node of the cluster. If the cache has been set to 20 (the default), and the increase was set to 30,000, each node is hiding 20 values separated by 30 000. And caches would be overlapping (i.e. node A would get 20 values of 1-570 001, node B would get 20 600 001-1 170 001 values). I don't see that this is in contradiction with what I posted.

  Obviously, the presence of a cache creates a bit of a ride with when, exactly, you say that a sequence is incremented. The NEXT_VALUE in DBA_SEQUENCES is incremented by cache * interval when any node exhausts its cache. The NEXTVAL of a sequence for connections that hit a particular node will increase by interval every time another session gets the NEXTVAL of a sequence. The NEXTVAL of a sequence for connections on a different node is not affected by what is happening on the current node. What enlightenment do you? If so, I agree.

  user11300030,

  Discussion on the sequence of caching can provide insight into why none of the lines are between 780 million and 1 billion. It is quite possible that these values have been cached on one node other than the node where the pads were executed. Had caches was flushed not when change you the sequence, inserts run on these other nodes could have used this range values.

  Justin

• After changing the administrator password in windows server 2003, I can not connect the next day why?

  After changing the password in windows server 2003, when the new password take effect?

  Hello

  In dealing with the problem with Windows Server 2003, it would be preferable to send the same in the Technet community. http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver/threads

  Hope the information is useful.

• Can I change the root password in VoP Server Explorer?

  Hello

  I was encouraged to see VoP Server Explorer, but my network does not have any system to have a default root password. Can I change the root user password?

  Thank you!

  Jennifer Flanagan

  Altogether.  Just connect to the console as root and type 'passwd' to change the root password.  Be sure to keep track of what you set, because there is little recourse except in single-user mode if it goes astray.

• Change the channel for Virtual Wifi Miniport Adapter

  Hello!

  I was experiencing problems of interference when using the module of Virtual wifi miniport, and I would like to know if there is any way I can change the channel on the v-wifi is bradcasting?

  THX!

  Lee

  Well, I tried to find the latest driver for my card, I could find anything to the atheros website (what gives?).

  Win 7 told me I got the latest driver, but I wouldn't trust windows update, as they said that my ethernet card was up-to-date (see 7.04) and when I went on the Realtek site, driver to v.7.23...

  Anywho! I was not able to change the channel for the ad - hoc connection. I tried the connection with a PC and still cannot connect (so not a problem related to Mac).

  I don't know what is happening with the miniport module or the wireless card (I tried different settings in properties and the Advanced Options tab, as power management), but it just would not work. So I got this router, and everything works fine.

  This is!