WRT54G can not detect internet connection

When I try to set up my wireless network, after "The name wireless network" screen when it goes to the page "internet connection" he always tells me I'm not connected to the internet, but in fact, I'm connected

What gives?

Thank you, but I just downlaoded LELA 3 and it fixed the problem!

Tags: Linksys Routers

Similar Questions

  • Pavilion dv2500: can not detect our connection to wifi PLDTHOMEFIBR (our own connection)

    Hello community of Hp.

    I have a problem with my PORTABLE HP PAVILION dv2500 PC.

    A few months ago, everything is ok.

    It can detect our wifi.

    then yesterday I just know that it can not detect our wifi at home.

    I mean that my laptop can detect our neighbors wifi. but it can not detect our own wifi.

    I already perform some troubleshooting method.

    the first thing I did.

    is that I perform a RESET of my modem.

    because I think that the IP of my laptop has been block by my modem.

    If, after that, it's the same. It can not detect our wifi.

    second is.

    I reformat WINDOWS Vista x 64.

    but it's the same thing.

    It can only detect our neighbors wifi. but our is not.

    last thing I did was to change the ip address of my laptop.

    but it did not solve my problem either.

    pls help me solve this problem.



    Thank you.

    and God bless you all.

    more power for the team of hp with this site.



    Please send me an email or comment here if you have an idea on how to solve my problem.

    [Personal information]

    Thanks again and best regards.

    Hi @BooJimBoo,

    Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!

    I stumbled upon your post on the HP laptop and wanted to help you! I looked in your question about your Hp Pavilion dv2500 Notebook and problems with the wireless connection. Try to reset the router. Wait 30 seconds before plugging and unplugging the router to make sure, it resets completely. Here is a link for troubleshooting wireless connection, if you need. Section I fell better help is the key to security is changed 3. To establish a new connection to the wireless network, return to the network sharing Center window, select set up a connection to a network.

    If the problem persists, I would change the channel on the router. Routers are able to communicate to your laptop on several different channels. You can contact your Internet provider.

    Some say that this download will help fix this Microsoft Fix it.

    Here is a linkto help as well.

    Please let me know how it goes.

    You can say thanks for trying to help by clicking on the Thumbs Up below! .

    Thank you.

  • I can not get internet connection on my compaq Presario57! I must be close to my router!

    Me and my brother have a laptop. He can get internet anywhere in the House except me! I have to stay close to our router. Even if I get like 5 inches, I can't have internet connection! Someone help me please? I have a compaq Presario CQ5! This has happened since Christmas!

    Hello

    Thanks for posting your question on the Forums of community of Microsoft.

    I see that the computer loses internet connection after a certain distance from the router on Windows 7.

    I suggest you to return the items provided to solve the problem with the internet connection.

    10 tips to help improve your wireless network

    http://www.Microsoft.com/athome/Setup/wirelesstips.aspx#fBid=rifDdtscE7F

    Wireless and wired network problems

    http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    For your reference:

    Setting up a wireless network

    http://Windows.Microsoft.com/en-in/Windows7/setting-up-a-wireless-network

    For the related issue of Windows or anything related to the Windows operating system, do not hesitate to contact us and we will be happy to help you.

  • Wireless can not detect the connection my TP Link router (SSID)

    Hello

    I bought Pavilion G4 - 1346tx Notebook PC last Sunday(15/04/2012).

    Since then, it cannot detect/find my ssid from my router. any other device inside the House can detect and connect. only my laptop cant. My Wifi card model: Broadcom 4313GN 1 x 1 adapter Wifi 802.11b/g/n

    I tried to change my router mode and etc2, always without prevail. I downloaded the driver with the latest version (5.100.82.82 of the HP website) that the previous stock (not sure which version) are still not.

    Please help me with this. I read two or three theme with the same problem and the solution, but the solution link is broken or can not find the driver. Help me ~ ~ ~

    Thank you. Appreciate the help...

    Solved in Paul_Tikkanen to:

    WiFi problem solved

  • My PC (win XP) can not get Internet through a Bluetooth adapter to the phone, same phone work with win 7 & vista.

    Original title: internet telephone

    My PC (win XP) can not get Internet through a Bluetooth adapter to the phone, same phone work with win 7 & vista

    Hello

    1. What is the brand and model of the phone and Bluetooth adapter?
    2. what exactly happens when you access the internet via your phone?

    Please provide more information. This will help us assist you better.

    How to ask a question

    http://support.Microsoft.com/kb/555375

    Also, please take a look at the below items that might help you.

    How to install and configure Bluetooth devices in Windows XP Service Pack 2

    How to troubleshoot Bluetooth detection and connectivity issues in Windows XP Service Pack 2

    Thanks and greetings
    Umesh P - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

  • Homestead sitebuilder does not see internet connection under Windows Vista

    Recently, I switched from Verizon internet home (very bad product) Qwest's high-speed wireless. No problem. However, I discovered that I have a problem with vista.

    First of all, microsoft updates would not download at all. I eliminated the firewall and done everything I could think and one day (had vista sp 1...) Yes, only had not updated in a while) it switched to automatic updates. Then it worked fine.

    My second problem is with my website building program. It is not the internet connection. If I have power of Attorney, the internet connection test is fine. I have no problem with my internet. I can get online every time that and fast. However, it is curious that my homestead sitebuilder program does not recognize. So I uninstalled the sitebuilder and tried to reinstall a clean install. The installation wizard starts and installs the first part, I hit then, and suddenly, I get a message error "Sitebuilder has stopped working; try to find a solution", in which he can never find the solution. So, I go to the site of the farm and download the zip file. I am able to install sitebuilder by these means, but then it takes forever to load on vista and never find the internet connection.

    Someone at - it solutions? It is a program that I use quite often and now I can only update online that allows me a limited capacity. BTW... I use firefox for my browser. Homestead accepts only the browser.

    Solutions?

    Hello

    You may need to contact the support for the site builder from homestead to reinstall.

    Also contact Qwest High Speed Internet connection to inquire the matter with an Internet connection.

  • After the Windows 8.1 update, can not access Internet in Firefox or Chrome, but IE 11 OK.

    After the Windows 8.1 update, can not access Internet in Firefox or Chrome, but IE 11 OK.
    I reinstalled the latest firefox, still cannot access Internet from Firefox.
    Microsoft is ridiculous?

    1. Run cmd.exe as administrator
    2. Type "netsh winsock reset" and then press enter
    3. Restart the PC
  • Boot Camp can not detect Windows software support

    Hi guys!

    1. I have a question, I started my bootcamp and pressed the 2 first options and clicked on continue:

    http://postimg.org/image/9mly0tvjl/

    2. that's what I did to "2." step. I chose the iso file of Windows 7 Home Premium and boot camp agreed and loading all fine!

    http://postimg.org/image/tg97p5fu5/

    3 and now it was time for step 3:

    http://postimg.org/image/554gf7i3x/

    After Boot camp let me decide how many GB, I want to save for Windows... I got 500GB (half) and clicking 'Install'... but the problem is here...

    It is said that: "Boot Camp can not detect Windows supports software.." and so on.

    Where do you think the problem is? Is - this problem on the ISO file?

    I would appreciate any kind of help,

    Thank you.

    What year/model is your Mac? Please see step 11 in install Windows 7 and previous versions on your Mac with Boot Camp - Apple Support .

  • wanting to know how I can keep my Internet connected until I decided to unplug it

    Hi, I'm wanting to know how I can keep my Internet connected until I had to unplug it. If I leave my computor minutes say 1/2 hour or if the internet wireless connection disconnects and I always have to appear to repair the connection and it says repair network adapter. Any suggestions please? Thank you

    Hello

    1. don't you make changes to the computer until the problem occurred?

    2. What are the operating systems installed on your computer?

    3. what type of connection you use?

    I suggest you try the steps from the link below and check if it helps.

    Method 1: Of connection problems in Windows wireless and wired network:

    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows?T1=Tab03

    Method 2: I suggest you to check the parameters of the power management of the device on the network adapter.

    To correct the settings please follow these steps.

    (a) click Start, click Run, and then type devmgmt.msc.

    (b) in the user account control dialog box, click continue.

    (c) in Device Manager, expand network adapters.

    (d) right click on the network driver and then click Properties.

    (e) click the power management tab.

    (f) click to uncheck the checkbox allow the computer to turn off this device to save power , and then click OK. If the option is checked, then uncheck the option and apply the settings.

    Once you have performed the steps, restart the computer so that the changes take effect, and then check the result.

    Hope this information is useful.

  • Computer can not detect any sound cards and graphics or communication ports.

    Recently I reinstalled Windows using the CD, I had Dell, when I bought my computer. However, when I was done with the installation, I went on youtube to look at things and I realized that the sound was not working. I thought I must have forgotten to install the driver for my sound card, then when I tried to install, it says something in the sense of "error". - Impossible to find Port Com1 I looked into this a bit on google and found that it is probably disabled in my BiOS. I'm not sure what to do after that, but I hope that someone knows why my computer can not detect anything.  hate viruses

    http://support.Dell.com/support/downloads/index.aspx

    Go to Dell website > drivers and downloads Section > key in your model number > get latest XP drivers for it > download/install them.

    See you soon.

    Mick Murphy - Microsoft partner

  • Audio input Inspiron 15 3000 can not detect the headset

    Audio input Inspiron 15 3000 can not detect the headset, but audio dell can detect something trendy. However, the playback sound device cannot detect any helmet. Now I only get gurgling in the helmet. How to solve this problem?

    Hello. To test the headphone switch the native Windows audio driver Realtek audio driver.

    1. open Device Manager (type devmgmt.msc in the box of Windows search).
    2. develop the 'audio controllers, video & game' and right click on "Realtek High Definition Audio".
    3 Select this option to "Update driver software".
    4. click on "Browse my computer for driver software".
    5. click on "Let Me pick from a list of drivers on my computer".
    6. put the "Show compatible hardware" check box if not already checked.
    7. in the list of devices, click on 'High Definition Audio"(native driver).
    8. click on "next".
    9. in the update driver warning box, click 'Yes' (the driver).
    10 restart the portable computer if you are prompted. If not invited, so no need to restart.
    [To return to the Realtek driver, do it again but reverse the names in steps 1-6.]

    If it is still bubbling even with the native driver, test by using other headphones. If still no luck then probably hardware failure. Contact technical support for warranty repair.

    If it works fine with the native driver, then the Realtek driver is buggy. Try a different version of the driver. If you need help with this answer comes back with the full model name (something like "Inspiron 11 3147", etc.) and which operating system there.

  • GPIB has not detected when connected to the internet

    Hello

    I have keysight power supply connected to the PXI-8880 via GPIB, it does not detect when it is connected to the internet & it was detected when its not connected. Any body can help me to solve this problem.

    Hello

    This problem occurs because of a conflict in present multiple network adapters in the system. It was a question that has used for detection of targets ethernet to the system that has been resolved. But then this question has also resolved to do the same thing. You can follow the link on how to change the order of the present network adapters in the system.

    http://digital.NI.com/public.nsf/allkb/FD9E1AF5AB1343098625736F0076DE6B

    You must also make sure that the IP addresses of the network adapters are different, otherwise conflict can happen also.

  • Computer can not detect the printer so that connected via USB

    My computer runs on Windows 7 Professional and my printer is model # D110a.

    My printer has worked fine since I got it, but a few weeks ago, my computer has been infected by a virus that forced me to reformat and reinstall everything. I installed the necessary software from the installation CD supplied with the printer, but when I try to connect my printer through the 'Add Device' option in the Configuration menu, my computer does not detect even if the printer is on and physically connected by a USB cable.

    Help please, I don't have the money to buy a new printer.

    No problem. Just glad that you solved. Can you go ahead and mark this as resolved to close issue? Thank you.

  • Connected to the local network, but can not use internet

    I recently had problems with access to the internet after reinstalling windows 7. Before the reinstall worked very well.

    I can connect to the local network without problem, and it shows that the internet is connected. Yet I can not access the internet. When I disconnect and reconnect, I get a few seconds of internet work before it stops working.

    When a diagnosis in the network and sharing Center, I get the error "default gateway is not available" and occasionally "the connection between your access point, etc. and internet is broken"

    Other computers and devices using the network are working properly, although there was a 'competitor IP address' error on another pc, which, after a reconnection, solved itself.

    I use an edimax 802.11n wireless card and a D-link router

    I tried several things to make it work again, but without result. Any help would be greatly appreciated

    disable TCP/IPv6 had no effect.

    I think I can have fixed me, I installed the driver microsoft before the reinstall instead of the driver edimax and internet suddenly started working.

    Thanks for the help of yor

  • Sony 55w790b tv with connected Wifi can not access internet services.

    I can use the Internet browser on this TV app, but discover the button on the remote control, which brings me to an Error Message that says services can not be access at this time. try again or cancel. When I click on a movie title.

    Everywhere I turn, I get this message.

    Except the Apps that do not work.

    I can't do a factory reset, many settings of the image to restore.

    What is the Solution, I hear a lot of people online complaining of the same problem and they say if you can access the Internet browser, then the problem is with Sony. And nothing should be done on my end.

    I noticed that the internet is slow over wifi and wonder if a network cable speed internet tv to the top. I have internet fibreop of the signal, it should be fast.

    The Tv need a software update. It works now. But wow Sony Community Customer Support is really bad. I still haven't answered my other questions. and I had to solve my problem in this post.

Maybe you are looking for