Change the level of redundancy

Similar Questions

• I need to generate 3.3 V logic level Digital train of pulses with the NI PCI-6221. Can I change the level of 6221 OR logic output?

  I need to generate 3.3 V logic level Digital train of pulses with the NI PCI-6221. Can I change the level of 6221 OR logic output?

  The output cannot be changed. 5V to 3, 3V level controllers are readily available (Maxim, I think). As long as the scanning speed (etc.) is fast enough for your pulse train, even 3, 3V regulator would work. I don't know if NEITHER offers a module to condition TTL levels.

• Minesweeper - can't change the levels - always goes back to 'Intermediate' as the first chosen

  Minesweeper - I started on 'Intermediary', and now I can't seem to change the levels - it boils down to "Intermediary" as the first chosen

  Hello

  I suggest tryuninstalling and reinstall the game and check to see if it helps:

  a. click the Start button, select Control Panel, click programs and then click turn on turn Windows features on or off. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  b. click girls games, uncheck the Minesweeper and click ok.
  3. restart the computer, follow the same procedure and check the Minesweeper.

  For more information, connect to:
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off

  It will be useful.

• MY QUESTION: IS IT POSSIBLE TO CHANGE THE LEVEL OF DIFFICULTY OF THE GAME OF CHESS TITANS? Thanks in advance.

  I got the game "Chess Titans" runs under Vista 32 bit. It works OK. But it seems impossible to change the difficulty level"of the game. The only time I was able to change the "level of difficulty" is when I installed MS Vista. I tried 'Options' - but it does not contain something immediately useful in this regard.

  Hi Provob,

  Thanks for posting on Microsoft Answers!
   
  Certainly, you can change the difficulty level of Chess Titans.
  1. Once you start the game.
  2. click on the game and then go to options.
  3. in the new window that opens, in the top right of windows, you can cursor diffculty.
  4. move the slider from left to right to increase the difficulty. There are 10 levels of difficulty from 1 to 10.
  5. Once you have customized your settings click Ok.

  * If the slider is dimmed or crashes, you can try to uninstall and reinstall the game using "turn Windows Feature On or Off.
  You can consult the following links for assistance.
  http://Windows.Microsoft.com/en-us/Windows-Vista/Chess-Titans-how-to-play
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-features-on-or-off

  Please let us know if this helps you resolve the problem or if assistance is needed.
  It will be useful.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Change the level of internet security via cmd

  I have no internet explore installed, after update, I lost my ability to change internet options. I am not install so I need to change the level of security via the command prompt. OR could someone tell me what that update the required internet options carried out through IE8 + so I can remove it. I had access without IE before the update.

  Hello TSM Dyrus,.

  Welcome to Microsoft Community forum.

  I would be grateful if you can provide us with the following information to help us better understand the issue.

  1. After that update, you are facing problem?
  2. You did the changes recent (hardware or software) on your computer?

  According to my research and knowledge, it is not possible to uninstall Internet Explorer from your computer permanently.

  Internet Explorer is a component integrated Windows which can not be uninstalled. More recent versions of Microsoft Internet Explorer are sometimes released for existing operating systems, replacing the old version. Eventually, users can then choose to return to this upgrade. Starting with Windows 2000, it is possible to disable Internet Explorer: the user cannot launch it but its web browser engine

  remains operational for the applications that use it.

  As you mentioned that you do not want to install Internet Explorer, but want to use internet options to change the security level. You can see the steps below to start using internet options without using Internet Explorer.

  • Press window and R key at the same time.
  • This will open the run window.
  • In the Run dialog box, type inetcpl.cpl in the
  • Now, press OK.
  • This will open the internet options window.
  • Then you can select the Security tab and change the level.

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Thank you.

• When you play Chess Titans, how can I change the level of difficulty?

  When you play Chess Titans, how can I change the level of difficulty?  I keep coming back to the level where I first started.

  You can adjust the level of difficulty, animation and sound settings and more.

  1. Open the Games folder by clicking the Start button. In the search box, type games and then in the list of results, click Games Explorer.

  2. Double-click Chess Titans.

     (Do not see? Check where are my games?)

  3. Click the game menu, and then click Options.

  4. Make your choices, and then click OK.

  http://Windows.Microsoft.com/en-us/Windows7/Chess-Titans-how-to-play

• How can I change the level of difficulty in the version of Windows 8 of spider solitaire

  How can I change the level of difficulty in the version of Windows 8 of spider solitaire?

  How can I change the level of difficulty in the version of Windows 8 of spider solitaire?

  Hello

  Press F5 on your keyboard and the options will open on the right side

  You can select the number of combinations, it

  Fun :)

• Change the level of confidentiality OTN profile field to yourself

  I think that some of the information that appears in OTN profile are external site home of Oracle. I gave my business information there and it is translated here by OTN with level of protection of personal information for registered users. I tried to change that for yourself, but it always throws error message: Unhandled Exception. So I have to update the name of the company (as is required) in the private sector in oracle's profile page.

  Is this a bug or we cannot change the level of confidentiality for external fields in OTN profile page.

  I wanted everyone to know that I was able to reproduce this error and filed a priority ticket with the technical team. I will keep posted you.

• Change the level of Logger ADF 11g

  Gurus,
  
  Is it possible to change the level of ADF Logger in one place in the application so that the newspaper above the threshold values are recorded, similar to the way that we do in Log4j.
  
  thnks
  11.1.1.5 Jdev

  You use the logging.xml for this file. In the "Application Server Navigator" open the integrated WLS, right-click on it and select "Configure Oracle Diagnostig slaughter". Small opens the correct logging.xml file that you changed through the built-in user interface.

  Timo

• How to change the level of zoom on a Web page

  How to change the zoom of a Firefox Web page level? In Internet Explorer, you can do this with the right end of the status bar icon. Any advice would be appreciated. Thank you.

  This article should help: https://support.mozilla.org/en-US/kb/font-size-and-zoom-increase-size-of-web-pages

• Screen makes sound when I change the level of the bightness on Qosmio G40

  I bought my G40 August 16 and after 16 days, when I change screen brightness level will do some sort of strange noise but if I change the brightness Maxium sound will disappear.

  Also if I press the surface of the screen inward (tricky), the sound will become smaller, I send my laptop in the den and the center of den changed new LCD inverter for me but after that the laptop is back, I find that the problem is still there and it was not fixed.

  What should I do?

  I noticed the same thing on different laptops. I presume that this sound change power supply for FL inverter product. You must be in a quiet room to hear that absolute. I checked on Tecra M and Satellite M70 and the result is the same.

  Perhaps you are worried about it, but believe me it's normal.

• Change the levels adjustment layer?

  I use PS CS6 x 64 for Win7. I'm trying to find a way to change the values on a 'levels' adjustment layer using javascript. I can't find any info anywhere. Curiously, the listener script does not seek to change the adjustment layer.

  Does anyone have some luck with this?

  (Edit: more info)

  Another way might be this function that allows you to specify inputBlack, gamma, outputWhite, inputWhite, outputBlack

  setLevelAdj = function(inBlack, inWhite, gamma, outBlack, outWhite) {
    var d, d1, d2, l, l1, l2, r, r1, s2t;
    if (outBlack == null) {
      outBlack = 0;
    }
    if (outWhite == null) {
      outWhite = 255;
    }
    s2t = function(s) {
      return app.stringIDToTypeID(s);
    };
    d = new ActionDescriptor();
    r = new ActionReference();
    r.putEnumerated(s2t('adjustmentLayer'), s2t('ordinal'), s2t('targetEnum'));
    d.putReference(s2t('target'), r);
    d1 = new ActionDescriptor();
    d1.putEnumerated(s2t('presetKind'), s2t('presetKindType'), s2t('presetKindCustom'));
    l = new ActionList();
    d2 = new ActionDescriptor();
    r1 = new ActionReference();
    r1.putEnumerated(s2t('channel'), s2t('channel'), s2t('composite'));
    d2.putReference(s2t('channel'), r1);
    l1 = new ActionList();
    l1.putInteger(inBlack);
    l1.putInteger(inWhite);
    d2.putList(s2t('input'), l1);
    d2.putDouble(s2t('gamma'), gamma);
    l2 = new ActionList();
    l2.putInteger(outBlack);
    l2.putInteger(outWhite);
    d2.putList(s2t('output'), l2);
    l.putObject(s2t('levelsAdjustment'), d2);
    d1.putList(s2t('adjustment'), l);
    d.putObject(s2t('to'), s2t('levels'), d1);
    return executeAction(s2t('set'), d, DialogModes.NO);
  };
  

  Davide

• I have Lightroom 5.7 and cannot change the level of zoom in grid mode.

  I am running Windows 10 and uses a 4 k monitor.  I have a secondary monitor to 1080.

  I can't change the number of photos in the grid view to have more than two overall.  It doesn't matter if I have the second active monitor or not.  I tried the = and - keys, as well as the scroll of the mouse wheel.

  He used to work properly, however I don't remember when it stopped working.

  Hi valleys,

  You can control the number of visible images in the display of the grid through the miniature slide that is there in the toolbar.

  Click the view menu > see the toolbar > thumbnail slider would be available just above your film.

  Kind regards

  Claes

• change the level of automation of the drs, vm storage

  As per http://communities.VMware.com/message/2172311#2172311

  I use LucD method, to retrieve a list of VMs that have turned on vm

  Function Get-StoragePod {}
  < #.
  . SYNOPSIS to find a DatastoreCluster
  . DESCRIPTION the function will return an object of StoragePod.
  It's being used by vSphere for a DatastoreCluster server-side.
  . Author NOTES: Luc relaxing
  . SETTING the name of the DatastoreCluster
  . EXAMPLE OF
  PS > Get-StoragePod
  . EXAMPLE OF
  PS > Get-StoragePod-name ' SDC. "
  # >
  (param
  [CmdletBinding()]
  [parameter (Position = 0, ValueFromPipeline = $true)]
  ([string] $Name = "*")
  Begin {}
  Function Get-StoragePodInternal {}
  (param
  [CmdletBinding()]
  [parameter (mandatory = $true, ValueFromPipeline = $true)]
  ([VMware.Vim.Folder] $Folder)
  $Folder.ChildEntity | %{
  if($_.) Type - eq "StoragePod") {}
  {Notice-EEG-Id $_}
  ElseIf ($_.) Type - eq "Folder") {}
  Notice-EEG-Id $_. Get-StoragePodInternal
  }
  }
  }
  }
  {in process
  Get-file-name data store | %{
  Get-StoragePodInternal-folder $_. ExtensionData
  } | where {$_.} Name - like $Name}
  }
  }
  $dsc = get-StoragePod-name $datastorecluster
  $vmlist = $dsc. PodStorageDrsEntry.StorageDrsConfig.VmConfig | where {$_.} {Enabled - notmatch 'False'} | Select @{N = "VM"; E = {(Get-vue $_.)} {{VM). name}}, on, IntraVmAffinity | where {$_.} {VM-like "* _replica"}

  It gets a list of VMs that have enabled DTS which should not successfully.

  I'm fighting with the deactivation of Dts.  I'm new to powershell

  from what I understand, I need to update dsc.podstoragedrsentry.storagedrsconfig.vmconfig.enabled to False.

  but I'm not sure how, or could point me in the right direction?

  You will need to use the ConfigureStorageDrsForPod_Task method to change the settings for DTS.

  In the StorageDrsConfigSpec object, you can disable it.

  Combined with your Where clause that could be something like this

  $storMgr = Get-View StorageResourceManager
  $pod = Get-DatastoreCluster -Name $datastorecluster
  $spec = New-Object VMware.Vim.StorageDrsConfigSpec 
  
  $pod.ExtensionData.PodStorageDrsEntry.StorageDrsConfig.VmConfig |
  where {(Get-View $_.VM | Select -ExpandProperty Name) -like "*_replica"} | %{
    $entry = New-Object VMware.Vim.StorageDrsVmConfigSpec  $entry.Operation = "edit"  $entry.Info = $_  $entry.Info.Enabled = $false  $spec.vmConfigSpec += $entry}
  
  $storMgr.ConfigureStorageDrsForPod($pod.ExtensionData.MoRef,$spec,$true)
  

  Note that the Get-DatastoreCluster cmdlet can be used to replace my function

• Change the level of luminance luminance-based existing level?

  Hello

  Say I have an image where I try to extract a mask on and I found that one of the channels will serve as a good starting point. Suppose in addition that I found I want to increase the level of luminance of pixels in the range of 60-65 per every 10 levels of luminance:

  i.e. all pixels including the luminance values of 60,61,62,63,64,65 would have the luminance values of 70,71,72,73,74,75 after the operation. Such a thing is possible with Photoshop?

  Thank you

  Matt

  .

  Maybe something like this will help you. A RGB additive (10, 10, 10) which applies only where the underlying pixels have gray value 60-65 using a "Mix" If condition The "blend if" can be set to consider the values in one channel, if you prefer.