Change the name of the folder "User".

Similar Questions

• Installation of Windows 8, error: change the folder or the file C:\Users on drive c. name and change the folder or filename to C:\ProgramData on drive C.

  Try to install windows 8 on a PC that is currently running Window XP.  It starts the installation but asks me to change the folder or the file C:\Users on C drive name. The second instruction is to change the folder or filename to C:\ProgramData on drive C.   Don't know what to do?  Thank you!

  OT:

  Problem installing Windows 8

  Hello

  Before starting the installation, you run these controls?

  Check if the manufacturer of your computer/laptop has Windows 8/8.1 drivers available for your model.

  If this is not available, Windows 8/8.1 not install and work properly for you.

  There is a lot of information in this first link from Microsoft:

  http://Windows.Microsoft.com/en-us/Windows-8/upgrade-to-Windows-8

  "8.1 for Windows system requirements.

  http://Windows.Microsoft.com/en-us/Windows-8/system-requirements

  See you soon.

• Change the folder to "BOLD" names

  I just spent XP to 7.0 percent   Talk about three steps back!

  I wish to have the names of folders in BOLD and a little bigger.  It is not

  seem to be a way to do it.   Any suggestions?

  Hello, Beatrice,.

  I would like to know some information about the problem so that we can help you better.

  What do you mean when you say "and a tad more"?

  Thank you for your query details.

  I also appreciate the fact that you want to change the folder to "BOLD" names.

  Please refer to the suggestions of André Furtado [MSFT] replied on 14 March 2012 and check if that helps.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/is-there-a-way-to-change-font-or-style-to-folder/cff009f4-4C97-44CF-B891-856e94552570

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Change the folder on Windows Explorer.

  How can I change the folder that opens at the start of the Explorer?

  Click on the round of Windows (start) > all programs > Accessories and make Windows Explorer right click > properties > Shortcut tab and change the target in a box to where you want Explorer to open, for example to open the Documents folder, type (or change) the following %SystemRoot%\explorer.exe C:\Users\your user name\Documents\ then apply, OK, etc..

• How can I remove "the folder/Users/user/to/mygame doesn't exist." Terminal. Rises every time I launch Terminal.

  How can I remove "the folder/Users/user/to/mygame doesn't exist." Terminal. Rises every time I launch Terminal. I am a novice. Thank you very much.

  1. Please select from the menu bar Terminal

  ▹ terminal preferences... ▹ Profiles ▹ Shell

  If the run command box is checked, uncheck it or enter the command to run automatically (if any), each opening of a Terminal window. Note: this is not how you define a default shell.

  2. If step 1 does not resolve the problem, see below.

  Back up all data.

  Select

  New Shell command ▹

  in the Terminal menu bar. Uncheck the box marked

  Run the command inside a shell

  If it is enabled.

  Copy and paste the following line into the text box that appears, and then press return:

  /bin/mkdir disabled_shell_files

  Close the Terminal window that opens. Repeat with this line:

  /bin/mv .profile .bash_history .bash_profile .bashrc .inputrc disabled_shell_files

  History Shell and former initialization files will be saved in a directory named "disabled_shell_files" at the top level of your home directory. It is normal that some of these files do not exist, and therefore, you will get error "no file".

  Close the window and open a new test.

  You may already know that files with name starting in '. ' are not visible in the Finder by default. So, if you open the folder that you created in the Finder, it will appear as empty, even if it is not. If you need to recover a portion of the data in the files of the shell, use a shell such as nano-based text editor (1). Make sure that you're not recreating the problem. Otherwise, you can delete the folder.

• = > Windows XP: change the way users log on or off < =.

  Using Windows XP.  I'm trying to "changes the way users connect or offshore."  When I click on this option, I get the error message * a recently installed program has disabled the Welcome screen and the fast user switching.  To restore these features, you must uninstall the program.  The following file name can help you identify the program that made the change: SGGINA. DLL * the computer belonged to my brother... can someone help me please?  I just want to be able to have 2 separate user accounts.  Thank you.  Oh yes, when I turn on the computer, I get the newspaper protected password on screen and am not able to view both of my user accounts!

  Using Windows XP.  I'm trying to "changes the way users connect or offshore."  When I click on this option, I get the error message * a recently installed program has disabled the Welcome screen and the fast user switching.  To restore these features, you must uninstall the program.  The following file name can help you identify the program that made the change: SGGINA. DLL * the computer belonged to my brother... can someone help me please?  I just want to be able to have 2 separate user accounts.  Thank you.  Oh yes, when I turn on the computer, I get the newspaper protected password on screen and am not able to view both of my user accounts!

  SGGINA. DLL is Sophos SafeGuard Disk Encryption.  You have to be careful to play with disk encryption, or you may end up not being able to access your drive at all.

  See the following article from Sophos to disable the SGGINA, but I had read up on Sophos SafeGuard Disk Encryption first to see if it has been set to encrypt anything and if so how to make sure you have the decryption key (or ask your brother):http://www.sophos.com/support/knowledgebase/article/109231.html

• Change the shared user using Java API Service

  Hi Experts,
  
  I have successfully run the example of classes Java from here: http://docs.oracle.com/cd/E17236_01/epm.1112/epm_security_api/frameset.htm?ch01s03.html
  And I need to change the code of UserFunctions.Java.
  
  UserFunctions.Java, I can create, edit, and delete a user.
  But in this sample program, when I want to edit a user, I should create a new user first.
  
  My requirement is I want to change the existing user passing the parameter when you run the program.
  So, when I want to launch the program, it should be like this:
  Java UserFunctions 'method' 'username', 'password', 'email', 'first name', 'last name '.
  
  FYI, I can create a user in passing the parameter as I mentioned above.
  But to edit a user, I still can't do it.
  
  Please find my codes below:
  
  public CSSNativeUserIF createUser (String username, String desc, String firstname, String lastname, String email, String pass) throws CSSException
  {
  The user CSSNativeUserIF = null;
  HashMap context = new HashMap();
  user = cssDMAPI.getNativeUserInstance (context, main);
  user.setLoginName (username);
  user.setDescription (desc);
  user.setFirstName (firstname);
  user.setLastName (lastname);
  user.setEmailAddress (email);
  user.setPassword (pass);
  cssDMAPI.addNativeUser (main user, context);
  
  return the user;
  }
  
  ' public void modifyUser (String username, String desc, String firstname, String lastname, String email, String pass) throws CSSException
  {
  The user CSSNativeUserIF = null;
  HashMap context = new HashMap();
  
  System.out.println ("Edit description user...");
  user = cssDMAPI.getNativeUserInstance (context, main);
  user.setLoginName (username);
  user.setDescription (desc);
  user.setFirstName (firstname);
  user.setLastName (lastname);
  user.setEmailAddress (email);
  user.setPassword (pass);
  cssDMAPI.updateNativeUser (main user, context);
  
  }
  
  -------
  
  in the Sub main():
  
  If (method.equals ("create"))
  {
  / * Create a native user * /.
  cu.printMsg (System.out, "- creating a user-" "");
  user = cu.createUser (username, desc, firstname, lastname, email, pass);
  cu.dumpUsers (System.out, "the user is created successfully," new CSSNativeUserIF [] {user});
  }
  ElseIf (method.equals ("update"))
  {
  / * Change native user * /.
  cu.printMsg (System.out, "- update a user-");
  cu.modifyUser (user name, desc, firstname, lastname, email, pass);
  cu.dumpUsers (System.out, "the user is updated", new CSSNativeUserIF [] {user});
  }
  
  Could you please help me with this?
  
  Thank you and best regards,
  
  Christophe

  Try this

  CSSUserIF [] usrs to = cssAPI.getUsers (context, principal, sLoginName);

  If (usrs.length > 0) {}
  CSSNativeUserIF natUser1 = (CSSNativeUserIF) usrs to [0];
  natUser1.setLoginName (sLoginName);
  natUser1.setFirstName (sFirstName);
  natUser1.setLastName (sLastName);
  natUser1.setEmailAddress (sEmail);
  natUser1.setDescription (sDescription);
  natUser1.setPassword (sPassword);

  cssDMAPI.updateNativeUser (context, principal, natUser1);
  }

• In XP, cannot change the way users log on and outside, getting the error "a recently installed program has disabled the Welcome screen and the user fast switching.

  The switch on my fast computer of user function has been disabled on my computer. When I try to use this function. I get the following message.

  A recently installed program has disabled the Welcome screen and the fast user switching. To restore these features, you must uninstall the program

  . The following file can help you identify the program that made the change. GT Gina.dll

  * original title - I have a windows xp. Under user accounts, choose a task. Under change the way users log on and outside.  I get a message that the function of the Welcome screen has been blocked *.

  Hello

  You can try the steps outlined in the article below and check out them.

  The logon screen "Welcome to Windows" does not appear when you start the computer
  http://support.Microsoft.com/kb/817142

• How to unlock the c: drive. I have only access to the folder users and subfolders.

  I have only access to the folder users and subfolders.  Everything I tried was "access denied."  I can't get to the root of c:.

  Hi, Scrivmark

  The default C: drive system is not intended to access directly by users and therefore users have restricted access to its root in the premeditated or premeditated damage prevention vital system files. If you are an administrator you can allow full access to your account to all or specific files on drive c (including a root folder) by editing its ' authorization of the lists by right-clicking on a file and choosing "Security."
  If you are not an administrator, you should ask another user whose account is Administrator (or equivalent) privileges to access the interesting files to your account.
  In both cases, you must understand damage system files, you can do.

  This suggestion is the intention that your computer is virus-free.

• I need to change the folder where download windows updates, I know there must be a way to do this.

  Could someone help me on this issue.

  I need to change the folder where download windows updates, I know there must be a way to do this.

  Updates Windows installation location cannot be changed. Windows updates tend to fix and replace the old files of the system, so it would normally replace a file in the System32 folder.

  If you want to free up disk space, see the following:

  • How to back up and restore your files manually
  • How to free up disk space in Windows

• How can I change the folder where the application Photo looking for pictures?

  I have a new laptop and when I add pictures in the pictures folder in my library they do not appear in the Photos app. All it says "there no file or folder in this point of view." I'll try to find a way to change the folder "Photos" in the search, but I don't see anything. The only thing I can think is that this is my second camera Windows 8 (from a Surface Pro 3) and when I started this diet I said to copy my old setting and he can always try to search for images in the directory of the other system. I noticed that my music was the same, but they give you the option to change the folder from the outset.

  Hello

  Welcome to the Microsoft community. I will certainly help you with the problem you are experiencing.

  Please refer to the suggestions Adam A (Windows) responded to the March 8,2014

  and check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-pictures/Windows-81-photos-app-does-not-show-any-photos/5b1740bc-d87d-4d07-afe5-c1a60cdecd55

  Note: To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

   

  Hope this information was useful. Let us know the results once you have tried these methods.

  Thank you

• How can I change the folder where the cache should be registered?

  How can I change the folder where the cache must be saved in Adobe Photoshop CC 2014?

  GoTo Edit > Preferences > discs to work.

  Drive D check and uncheck the C drive.

  Move the D drive to the top.

  Restart Photoshop.

  

• How can I change the folder to be d:\work\ by default startup?

  How can I change the folder to be d:\work\ by default startup?

  He seems to be on file by default whenever I opened that I offer.

  I am using Bridge CS4

  Thanks in advance

  Line

  If the program does not open the last folder you visited you most likely have the option enabled to automatically load bridge at startup.  Disable this option in PS or close bridge before shutting down the computer.

  Post edited by: curt y

  If you always want it to start on a specific folder, you can leave it on autoload, go to the folder that you want to start, then exit bridge.  It should load this each time in the future.  Many of us discourage the auto load option because it can lead to other problems as well.

• installation of windows 8, Setup requires me to "Change the folder or file name of C:\users on drive C", but it won't let me

  ORIGINAL TITLE: hellllllpppp?

  Hi!, iam windows installation 8 and Setup requires me to do and I qoute, "Change the name of the file or folder of C:\users on drive C" well it won't let me change or even move and iam the admin here too, why it asking me that and how do I change because I can not go forwartd autour or under this so I can complete the set up iam using xp pro with 9 browser

  Hello

  Create a bootable USB drive or DVD from the .iso in Windows 8:

  http://www.eightforums.com/tutorials/2227-create-bootable-USB-DVD-Windows-8-release-preview-ISO.html

  Then start under it and install.

  If you do not format anything during installation, all your old files will be placed in folder C:\Windows.old.

  You can then copy what you want to keep, get out of here.

  After that, you can use the disk cleanup utility to remove this folder if you check the box to do this.

  Enjoy.

• Cannot change the folder name of the user, i.e. the C:\Users\user name (folder name)

  I got a new computer w/Windows 7, but Set - up guy was working on 2 computers and put the wrong name in this machine slot 'username '.  All seeking answers to correct (my machine automatically books with my ADMIN correct name but doesn't let me change an incorrect name in the USER file), I came across this on VISTA.  It also applies to Windows 7?

  "What you see is the reference in the"C:\Users\user name"folder. While you can change the registered owner and the name of the user account, you cannot change the name of the folder 'C:\Users\user name'. The only way to do this is to create a new admin account and delete the one in a new. »

  If the solution IS identical to that of Vista, the instructions on the following link apply?
  http://www.Vistax64.com/tutorials/93026-user-account-delete.html

  Yes, the solution is identical to that of Vista, and apply the instructions at this link.

  Create a new account with the correct name and delete the old account.  If you wish, save the old account during erasing files and copy them into the new account.