Change the name of the provider

Similar Questions

• Change the provider of services on a unlocked 755 p

  I bought an unlocked Alltel 755 p on EBay.  He wired Alltel inside for internet and e-mail connections.  I do not want to get these services from Alltel since I already have them.  Is it possible to change them in the 755 p?  Thank you.

  With the 755 p is a CDMA device, you are unfortunately "linked" to the company that is the brand for regardless of whether if the seller tells you that it is "unlocked."  Unlocking really refers to MOBILE phones, where you can remove the SIM lock on a phone subsidy and then be able to put in and use any SIM card and then use on that network.  Unfortunately this isn't possible on CDMA networks.  Even if it's really "unlocked" and all settings are wiped out, the carrier that you want to use on will be able to determine that it isn't 'their' phone and don't activate it on their network.

  If you have no intention to use on the Alltel network, I suggest sell it and get a smartphone of GSM network instead.

  Message is about: Treo 650 (Rogers)

• [REQUEST] Change the Word Developer

  Hi friends! does anyone know how to change the provider Portal password? I tried clicking and browsing the link I could find but did not find the link for password change

  Thank you

  developers!

  in the case where someone facing the same problem, you can change your bbid by https://blackberryid.blackberry.com/bbid/login/ has soon!

• Question about changing the refresh frequency for the perf of run-time statistics

  Hello

  I would like to know if there is no API or refresh rate of orders to change the provider.

  For example when I train to recover PerfProviderSummary.getRefreshRate () disk performance statistics, I see that the refresh rate is set at 20 seconds (by default). Call of PerfProviderSummary.setRefreshRate (5) has no effect on future calls and the refresh rate remains at 20 seconds.

  ESXTOP however to change the refresh rate up to 2 seconds.

  Thank you and best regards,

  Prashanth

  Hi Julie,.

  It is not possible to change the frequency of refresh in real time of 20 seconds. The vim. PerformanceManager interface is limited to a minimum of 20 seconds sampling period.

  In addition, it is always recommended to call the QueryPerfProviderSummary API on the entity to verify the refresh rate and use this query for performance statistics refresh rate.

  I hope this answers your concern!

  -Angela-

• change the name of the base directory

  How can I change the name of the BASE DIRECTORY? without loss of all files, programs and information.

  IM alredy see this: change the name of the OS X user account and the name of folder on your Mac - Apple Support

  but nothink on the name of the BASE DIRECTORY.

  A user of instant messaging on this MBP and administrator also me.

  Step 2 under Lion or later:

  Go to the folder on the startup disk users. The users folder contains the base folder of the account that you are renaming. Rename the folder for this account, and note the old name and the new name. When you rename the folder, you will be prompted to enter the name administroator and the password that you used to connect.

  But note that you must be logged in as a different user you are trying to rename. So, you will need to create a new account and allow him to administer the computer. Connect to this user and follow the instructions in the link you provided.

• Can I change the name of the object to measure report

  Hi, I'm new to TS! Can I change the name of the object to measure report? Who can help me. Thanks in advance!

  «Under normal circumstances, I finished the test USE, TS generated the report like this "report [13-29-06] [4F492CAB04] [2012-11-28] .html'.»

  Can I change something, when TS report will like this"report [13-29] [4F492CAB04] [2012-11-28] .html' without seconds!

  One way is to modify the process template.

  Locals.ReportFilePath saves the name of the report. You can access only functions (such as SerachAndReplace) to create the new ReportFilePath.

  In the model sequential process step determine the path of the report file provides the path to the report file using the report options settings. Custom code can be placed after this step.

• What exactly happens when you change the name of the computer, and it asks you to restart?

  What exactly happens when you change the name of the computer, and it asks you to restart - relating to the registration and identification of network?  Specifically when a computer isn't yet in one area but is still in a working group.  Y at - it show any PC by informing other computers it's name has changed?

  Computers into working groups are actively seeking each other, so if you rename a computer, it will not be shown anything. The restart is to erase the name of origin since the system cache, he will think that it's always the old name until the reboot takes place. Work computers is simply 'shake hands' with each other whenever they need to communicate.

  Computers that are part of a domain are created a 'computer' account that is assigned a random password that changes every 30 days by default automatically. These computer accounts work almost identical to an Active Directory user account, which means that they are not proactive they simply cached credentials with their permissions to provide if / when requested by heritage in the environment.
  Users and computers Active Directory accounts are stored in the NTDS. SAID the database, the backbone of an AD environment. When a computer name changes in one area, it takes the PC restarted simply for the PC. The change of name in Active Directory will replicate throughout the environment based on the settings of replication of this environment.
  I'm too simplify all this, but the general concept is there.

• Permissions to change the name of the computer in Windows XP

  I have a user who I want to be able to have the permission to change the name of the computer that is connected to the domain.  When I try to change the computer name I enter the username and password in the popup box and then I get the following message: The following error occurred attempting to rename *.  Access is denied.  I know that this means that the user doesn't have permission to do this.  Can someone tell me what permissions they need?  I don't want to give them fo all administrative rights.

  Thank you.

  Tammy Mills,

  Thank you for visiting the Microsoft answers community.

  The question you have posted is related to the areas and would be better suited in the Windows XP IT Pro community.
  Please visit the link below to find a community that will provide the support you want.
  http://social.technet.Microsoft.com/forums/en-us/category/windowsxpitpro

  Hope this helps Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Need to change the name of the administrator under the folder of the user account

  I just got a new HP laptop with Windows Vista 64 SP1. My friend who got the laptop I use a nickname that I hate it when he set up the computer for which it was not supposed to do in the first place. I went to the section control panel user accounts control and changed the name of the administrator account. I have only the administrator account on my computer with the guest account. That part worked.

  My problem is that, under C:/Users / (username), it still shows that hated nickname. I want to change the name of this folder, but cannot understand how or if it's possible. Can anyone help? Thanks in advance

  As you have discovered, you cannot change a user account by simply changing the name. That will be a change cosmetic only and none of the files/folders real profile will be changed. Follow the instructions below to fix things to your liking and to implement correctly under Vista user accounts.

  1. create the new user account (named as desired) as a * standard * (not administrator) account and at least one additional account with administrative privileges. Call the extra account 'CompAdmin', 'Tech' or similar.

  2. Enter the new user account once if the profile files are created, and then disconnect and then connect to CompAdmin.

  3. go in Control Panel > system > advanced > user profile > settings

  4. you will see where you can copy user accounts. Copy the misnamed old account to the new name correctly there. Use her browse to select your new account (C:\Users\newaccount). If you don't want to copy all the settings, and then instead simply navigate using the old user, music Explorer Windows Documents, etc. and copy the data to the new user folders.

  5. connect to your new correctly named user account. When you are sure to have what you need, you can delete the misnamed control panel user account > accounts to users if you wish.

  General information about configuring users in Vista:

  You absolutely don't want to have only one user account. As XP and all the other modern operating systems, Vista is an OS multi-user with system built-in accounts such as administrator, by default, all users and guest. These accounts should be left alone because they are part of the structure of the operating system.

  In particular, you do not want one account user with administrative privileges on Vista because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult. It is not impossible to activate the built-in administrator to rescue things, but it will take third-party tools and work outside the operating system.

  The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. If your normal user account is an administrator, having created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.

  If you want to go directly to the desktop and ignore the Welcome screen with the icons of the user accounts, you can do this:

  Start Orb > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).
  MS - MVP - Elephant Boy computers - don't panic!

• Cannot change the name of the default client on windows.

  someone got on my computer and changed the name on my guest account. How can I get this out of my guest account name?

  Hi Lolomorrow,

  You can connect from an administrator account and try to change the name of the guest account.

  You can try the following steps to do the same thing.

  a.Open account by clicking on the Start button, clicking Control Panel, clicking user accounts and family safety, then clicking on user accounts.

  b manage another account.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  c. click the guest account, and then select Rename.

  d. type the new name.

  e. restart the computer and check.

  For more information, you can consult the following articles.

  What is a guest account?

  Hope this information is useful.

• I had no success to determine how to change the date, time, attributes etc (although the name can be changed) files in Vista Home Basic that I was able to do in Windows 98 Second edition. __Is their a reasonable solution to this? __Thanks

  It is my first visit to this feature of Microsoft Internet.  It defines a model for constructive citizen of the world form a more perfect union.
  Thank you.

  A "more perfect union"? Really? I'm not terribly interested in forming a union with a person, perfect or not, but I'll gladly try to help you with your it questions. To do this, you will need to provide more information about your computer and your questions clearly and concisely in the body of the message, not in the subject line. These links will help you with your next post:

  http://www.elephantboycomputers.com/page2.html#Usenet (you can ignore the references to Usenet discussion groups / as you post on a web forum, but any suggestions on how to write the post are applies here too)

  http://support.microsoft.com/default.aspx/kb/555375 - how to ask a Question

  Change the date and time of Vista:

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-the-clock

  Don't know what you mean by "attributes".

  You change a file name in Vista right click on the file and then left-click 'Rename' or by clicking the file to select it by pressing F2. MS - MVP - Elephant Boy computers - don't panic!

• How can I change the name of the user folder on drive C in Microsoft Vista?

  Hello. My father bought me a laptop about a year ago and when he started, he was the administrator. I want to change it because it is mine. I went into the Panel and changed the administrator.

  When you start the laptop, when you try and you enter in you must click on the name and photo. That's my name.
  When you open start, my name is there on the right with its own content of contacts, desktop, documents, downloads, Favorites, links, music, images, games, videos and research.

  The problem is when I open my C drive and go to users, there is a folder with the name of my father and the public. If you open the name of my father, it contained contacts, desktop, documents, downloads, Favorites, links, music, images, games, videos and research.

  I tried to change it again via Control Panel and just try to rename the folder. None of those who worked.
  How can I change my name? Is it still possible?

  Thanks for your help.

  Your father apparently just rename her user account with your name. As you have discovered, you cannot change a user account by changing just the name. Simply by changing the name will do a cosmetic change only and does not affect the underlying files/folders in the profile. If it is important for you:

  1. from an administrator account, rename the account she had originally. Then create the new Standard * user account named in the way that you want and at least an additional administrator account. Call the last 'CompAdmin' or 'Tech' or similar.
  2 log in to the new Standard user account once if the profile of the files/folders are created and then connect to CompAdmin.
  3. now go to control panel > system > advanced > user profile > settings *.
  4. you will see where you can copy user accounts. Copy the old account to the new from there. Use her browse to select your new account (C:\Users\newaccount).
  5 log in to the new account correctly named and make sure all your stuff is here and it works as you want. When you are satisfied, you can log on and CompAdmin and remove the old account from the control panel > user accounts.

  * In the course of running as a user Standard is recommended for security reasons and will help protect your computer against infections. You don't want to run as administrator for your daily work. Keep CompAdmin for your administrative account and use it only for the elevation and emergency situations.

  * If you do not want to bother copying old misnamed account settings, you can skip this bit and simply copy your data to the new user account instead.

  If you want to access your account again, correctly named automatically, follow these steps:

  Start Orb > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null). MS - MVP - Elephant Boy computers - don't panic!

• How to change the user name in windows 7 Professional?

  I recently installed windows 7 Professional and by chance I typed my user name and the computer when it prompted me to type it in. When I had typed the wrong characters in and click on 'Next', he wouldn't let me go back and change it, so I was stuck with an unwanted user/computer name. I managed to change the name of the computer for the word you want, but I didn't always know how to change my username.

  I went to user accounts, and there was an option to change the name of the account, so I did.
  However, none of my directories has changed its name, and all processes in the Task Manager were still running under the same previous user name, which I did not want it to be.

  Is there a way to change the username of an account so it affects all the directories, files, folders, etc. without creating a new account with that name? Or, if possible, copy all the files and preferences of the current account to another account with this name?

  Any help is appreciated.

  You cannot change a user account by changing just the name. Simply by changing the name will do a cosmetic change only and does not affect the underlying files/folders in the profile.

  1. from an account with administrator privileges, go to control panel > user accounts and to create the new user account named Standard the way you want to and at least one additional administrator account. Call the last 'CompAdmin' or 'Tech' or similar.
  2 log in to the new Standard user account once if the profile of the files/folders are created and then connect to CompAdmin.
  3. now go to control panel > system > advanced > user profile > settings
  4. you will see where you can copy user accounts. Copy the old account to the new from there. Use her browse to select your new account (C:\Users\newaccount).
  5 log in to the new account correctly named and make sure all your stuff is here and it works as you want. When you are satisfied, you can log on and CompAdmin and remove the old account from the control panel > user accounts.

  If you want to access your account again, it is corrected automatically, follow these steps:

  Start Orb > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).

  General recommendations for the establishment of user accounts

  You absolutely don't want to have only one user account. Like XP, Vista and all the other modern operating systems, Windows 7 is an OS multi-user with integrated system of accounts such as administrator, by default, all users invited. These accounts should be left alone because they are part of the structure of the operating system.

  In particular, you do not want account only one user with administrative privileges on Windows 7 because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult. It is not impossible to activate the built-in administrator to rescue things, but it will take third-party tools and work outside the operating system.

  The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.

  If you want to go directly to the desktop and ignore the Welcome screen with the icons of the user accounts, you can do this by following the instructions written in the first part of this post.
  MS - MVP - Elephant Boy computers - don't panic!

• No access to systems on a network - error "the name of the provider specified network is Invalid"

  Hello!

  I can't use the network to locate files on a computer, and it drives me crazy to understand. Heck, he can't even locate yourself.

  Here is what comes up when I try to do.

  

  All computers, I clicked on do not work and they are all Windows 7 except for my laptop which is 8.1. Any fix?

  Thank you
  Christian

  Original title: the specified network provider name is Invalid

  Hi Christian,

  I would like to ask you:

  • What operating system is installed on the system you are trying to access?
  • You have enabled sharing on the computer that you are trying access?

  I suggest you to change the settings on the computer that you are trying to access the network and enable sharing on this computer. This error appears when the computer or the computer is connected to the network but the sharing is not enabled.

  Reference:

  Networking of computers running different versions of Windows

  If you are running Windows 8 or 8.1 of Windows on another computer, see:

  Search for computers, devices and content on your network

  Let us know the results once you have enabled sharing on the other computer. I hope this helps. We will be happy to help you further.

• Change the name of the report.

  Hello

  I am unable to change the name of interactive report once it has been created. How can I change the name of report?

  Concerning

  John.

  1011589 wrote:

  Please update your forum profile with a recognizable username instead of "1011589": Video tutorial how to change username available

  Always include the information referred to in these guidelines when you ask a question: How to get the answers from the forum

  I am unable to change the name of interactive report once it has been created. How can I change the name of report?

  Depends on what you mean by "name of interactive report. Explain what you did in detail and provide a clear and complete description of your needs.

• How can I change the account names?

  * Original title: change account names

  I got a new PC that connects to an Account of MS. I created one under a Gmail account. All is well until I leave it to the companies.

  I allow someone to use my computer for Skype me from this computer to the laptop I have with me at the time. They create a new Skype account and it works well.

  However, I just got back and it seems as if there is only one account, under the new MS Gmail Account they had to create, which is linked to the Skype they used then. My account name disappeared, and now all the files that I had my account when I left are under the account they created.

  How can I change their new Gmail MS account on the account which I have had without losing my files, keeping their active Skype account and keep my Skype account linked to my account?

  Thank you!

  Hello

  I understand the inconvenience that this may cause.

  Quickly, I would like to ask you a few questions. Please answer the following questions to help you best.

  1. Are you able to connect to the account only?
  2. Have you tried to create a new Microsoft Account?
  3. At they deleted your Microsoft Account and converted into a local account?

  I suggest to move the Microsoft Account to the Local user account. Then switch back to Microsoft Account and provide the address (URL) you were using previously.

  Here are the steps to switch from a Microsoft account to a local account:

  1. Drag from the right edge of the screen, tap settings, and then tap Change PC settings.
     (If you use a mouse, point to the lower right of the screen, move the mouse to the top, click settingsand then click change PC settings).
  2. Press or click accounts, and then press or click on your account.
  3. Press or click Disconnect, and then follow the instructions.

  Once you switch to a local account, then again move Microsoft Account using the old email address.

  Follow these steps to move to Microsoft Account:

  1. Drag from the right edge of the screen, tap settings, and then tap Change PC settings.
     (If you use a mouse, point to the lower right of the screen, move the mouse to the top, click settingsand then click change PC settings).
  2. Press or click accounts, and then press or click on your account.
  3. Press or click to connect to a Microsoft account.

  Keep us informed on the status of the issue. We will be happy to help you.