change the registration point: no simple way that WORKS!

Similar Questions

• Change the registration point. Won't change

  How to change the alignment of the clip point? The one that I then select creation, not point of transformation.
  
  (Why I need is, then I copy the images of the breast clip for the scene, the objects are moved next door (point record matches corner of stage..))
  
  Thank you
  Linas

  use the tool multiple framework edition, select all your items on all frames
  inside the movieclip and reposition them. (if it's a large movieclip, before
  to do this, you can change your fast preview mode or
  contours...)

  JG

  "drghfgjmetkzredjzrtk" wrote in message
  News:ejnds9$JCU$1@forums. Macromedia.com...
  > How to change the alignment of the clip point? What I then selects
  > creation
  > it, no point of transformation.
  >
  > (Why I need is, so I copy images of breast clip for the scene,)
  (> objects are moved to the side (point record matches corner of stage..))
  >
  > Thank you,
  > Linas
  >

• Cannot change the registration point

  I am creating a preloader type needle gauge and I created the needle and it's a MC and set point alignment in the Middle at the bottom, but it is still running on a center axis.

  Any help?

  This is the tutorial I'm following:

  http://active.tutsplus.com/tutorials/ActionScript/Display-Data-with-funky-Animated-Needle-/ gauges

  Open your movieclip to edit and manually move the chart of the needle, so that the line of sight of registration where you want.

• I'm on Acrobat 10 and I need help with the distribution of shape feature. Is there a way to change the registration e-mail download addressed to the? Currently all forms I create and then distribute may only be subjected to my email account... I appreciat

  I'm on Acrobat 10 for mac and I need help with the distribution of shape feature. Is there a way to change the registration e-mail download addressed to the? Currently all forms I create and then distribute may only be subjected to my email account... I appreciate any help!

  Do not use the feature distribute the form. Instead of this, just put up a button "submit" and configure it to send email using any email address you want. Just add a button and set the action of the mouse upward on "Submit a form" and use a type mailto URL and specify that you want to send the full PDF. Then activate the reader of the document: where "Advanced/extended features in Adobe Reader" is located in Acrobat XI?

  If you really want to use distribute the form for some reason, change the e-mail address in your preferences: Edit > Preferences > identity > Email address

• I am very new to dream. I created a simple site that worked very well. I tried SEO booster and was checking on things different (for example Goigle webmaster). I don't know exactly what I did, but now when I type in my site it says the Palestinian Authori

  I am very new to dream. I created a simple site that worked very well. I tried SEO booster and was checking on things different (for example Goigle webmaster). I don't know exactly what I did, but now when I type in my site it tells me that the page cannot be opened because it was redirected too many times...? Help, please!

  Let me add some details to the choice in the scenarios you have for the use of domains.

  The areas are to simplify all kinds of activities on the Internet for users. Instead of addressing your email to go to the software from e-mail server to a computer with the IP 113.78.59.238 number, users can simply run their mail to "hannah" @ "gmail.com" or go to the website to "gildedgraces.com". This makes things a lot easier for users, but requires a little more difficult techniques backstage, because Internet computers connected and hardware (servers, tablets, phones, refrigerators) have only single numbers, not names. So, how internet needs to know which computer manages all emails for "@gildedgraces.com", and where physically this site 'www.gildedgraces.com '? This is where the "Domain Name Servers" kick in. They maintain long lists of these domain names, with references to the IP numbers correct and up-to-date. In this way, technicians can also easily Exchange computers, servers, connections, where a site is moved to another host, or when a server suddenly collapses. These things will happen, things have to change. They want to update certain IP numbers in the list on the DNS servers. I have it?

  So in order to get a Web site running, you know where your domain registry database is guarded and kept safe, and where your Web site is physically located.

  Note the difference between DNS (or servers) and the service (or Web servers) throughout all the instructions and documentation.

  Now, have a look at this PDF that was returned by Brad, in his response above.

  The domain name can be registered at any domain provider and the registry itself is not always need to reside there. You could relegate (you might say "move" or move) the registry for the DNS to another provider (like BC) service. In such a scenario, he must tell the provider holding the credentials of your registry, to redelegate it in British Colombia. That's what the article 4 in the PDF file. And of course, BC DNS service can internally so all applications for this field to their own web server.

  You can also choose to keep your current domain provider maintains the registry, but that their DNS servers before any request of this area on the web servers of British Colombia, where your site is published. This is typically a necessity for registrations from non-American, since many extensions of national domains (such as .nl and .de) can be recorded by suppliers outside of this nation. So the registry simply cannot be moved to an American company (it's a legal thing). In such a situation, article 6 of the PDF comes into play, describing what BC would normally internally: to the domains of the physical location of the Web site.

• My theme tab in display properties is unusable. How can I change the theme in a different way?

  How can I change a theme in a different way, not not not using the properties of display/theme?
  Because this tab is just lika a image - there is nothing clickable, none of the functions to work.
  I need for you to tell me how to change the themes in a different way, even if it is very complicated, or you could tell me where I can download a file that I need to replace the old works is not a (one that works on this theme unusable tab)

  I hope for a quick response,
  Thank you

  Hello

  Remember to make changes to the computer before this problem?

  There are no other methods to set the display settings.  However, you can try to solve the problem.

  
  Follow these methods.
  Method 1:

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows: http://support.microsoft.com/kb/322756

  Perform these steps.

  a. copy then paste the content below into Notepad.

  b. above, click on "file save as" change the "save as type" to "All files" and name it anything with a .reg extension.

  c. Double click on it and choose "merge" see if that brings the display options of the properties.

   

  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]

  "NoActiveDesktopChanges" = hex: 00, 00, 00, 00

  "NoActiveDesktop" = DWORD: 00000000

  "NoSaveSettings" = DWORD: 00000000

  "ClassicShell" = DWORD: 00000000

  "NoThemesTab" = DWORD: 00000000

   

  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\System]

  "NoDispAppearancePage" = DWORD: 00000000

  "NoColorChoice" = DWORD: 00000000

  "NoSizeChoice" = DWORD: 00000000

  "NoDispBackgroundPage" = DWORD: 00000000

  "NoDispScrSavPage" = DWORD: 00000000

  "NoDispCPL" = DWORD: 00000000

  "NoVisualStyleChoice" = DWORD: 00000000

  "NoDispSettingsPage" = DWORD: 00000000

  "NoDispScrSavPage" = DWORD: 00000000

  "NoVisualStyleChoice" = DWORD: 00000000

  "NoSizeChoice" = DWORD: 00000000

  'UnadviseClient ' = -.

   

  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\ActiveDesktop]

  "NoChangingWallPaper" = DWORD: 00000000

   

  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\ThemeManager]

  'ThemeActive' = '1 '.

   

  "DllName" = hex (2): 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52, 00, 6f, 00, 6f, 00,------.

  74,00,25,00 5 c 00, 72, 00, 65, 00, 73, 00, 6f, 00, 75, 00, 72, 00, 63, 00, 65, 00, 73, 00, 5 c,

  00,54,00,68,00,65,00, 6 D, 00, 65, 00, 73, 00, 5 C, 00, 6 C, 6F 75, 00, 00, 00, 61, 00, 5 C, 00,------.

  6 c, 00, 75, 00, 6F, 61, 00, 00, 2nd, 00, 6 d, 00, 73, 00, 73, 00, 74, 00, 79, 00, 6 c 00 65, 00, 73,------.

  00,00,00

  Method 2:   In addition, run the SFC (System File Checker) scan and check if there is any system of file corruptions. (You need the XP disc to run this method).
  a. to do this, click Start, click programs, on Accessoriesprincipally made, right click guestand then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  b. type the following command and press ENTER:
  sfc/scannow
  
  The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.
   
  More information on SFC scan found in this document:
  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
  http://support.Microsoft.com/kb/310747

  Method 3: If the methods above do not help, you maytry to perform a system restore.
  The System Restore tool uses points of restore to return the system files and settings to an earlier point in time. You can use it to restore the operating system to a point in time where you have not experienced the problem.

  For users of XP system restore.
  How to restore Windows XP to a previous state
  http://support.Microsoft.com/kb/306084

• How can I uncheck "read only" in the download folder in a way that it will remain disabled

  How can I uncheck "read only" in the download folder in a way that it will remain disabled

  If done through properties does not stick, have you tried running the command attrib-r at the command prompt?

  Click Start, click run, type cmdand press ENTER.
  To view the syntax for the Attrib command, type attrib /? at the command prompt.

  Check MS article for more details.
  You cannot view or change the read-only or system attributes:
  http://support.Microsoft.com/?ID=326549

  I guess that you are authorized to make changes on this file, if it does not play here.
  How to set, view, change, or remove special permissions for files and folders in Windows XP
  http://support.Microsoft.com/kb/308419

• How to change the number of "windows recently closed" that appear in the menu "history"?

  The maximum number of "recently closed windows", I have 3 are available in my menu "history". How can I change the options to get more than that?

  Hello

  You can try to click right and change the value of browser.sessionstore.max_windows_undo in Subject: config.

  1. In the address bar, type Subject: config and press enter. The subject: config "this might void your warranty!" warning page may appear.
  2. Click on I'll be careful, I promise!, to continue on the subject: config page.

  Subject: config entries

  The add-on Descriptions of config adds comments of useful source in topic: config.

• I can change the settings on my netbook so that it is not "off automatically" I need a constant power when charging my flip camcorder

  Original title: changing the settings!

  I can change the settings on my netbook so that it is not "off automatically" I need a constant power when charging my flip camcorder

  Hello Christina MacInnes,

  Please visit the links below with respect to the power settings.  It's for Windows 7, so please let us know if you are using a different version.

  Power Managemnet

  http://Windows.Microsoft.com/en-us/Windows7/products/features/power-management

  Change, create, or delete a power plan (scheme)

  http://Windows.Microsoft.com/en-us/Windows7/change-create-or-delete-a-power-plan-scheme

• I can't get into my control panel to change the security settings or anything like that. It says \windows\systems32\rundll32.exe not found. What should I do?

  I can't get into my control panel to change the security settings or anything like that. It says Windows\systems32\rundll32.exe not found.  What should I do?

  Hello

  1. don't you make changes on the computer before this problem?

  Check if the steps of troubleshooting the following article shows you help.
  Cannot find the Rundll32.exe file when you open Control Panel
  http://support.Microsoft.com/kb/812340

• I want to do "System Restore" in Windows Vista. But I can't change the restore point

  I want to do "System Restore" in Windows Vista. But I can't change the restore point. How to configure manual restore point? Can I enter a date I want to restore? I tried, but it did not work.

  Original title: in Windows vista system restore

  Hello

  Either the system restore point is already created for an earlier date, or is not available.

  You cannot create a restore today Point to return to yesterday.

  You can create a restore today Point to use in the future.

  Here's how to use the Vista system restore:

  http://bertk.MVPs.org/html/restoresysv.html

  See you soon.

• Why don't c:\users\attrib h 'All Users' changing the directory to all users so that it displays in the file Explorer? Same thing with %APPDATA%\microsoft\windows\sendto and ProgramData directories?

  Title asks this.

  Why don't c:\users\attrib h 'All Users' changing the directory to all users so that it displays in the file Explorer?  Same thing with %APPDATA%\microsoft\windows\sendto and ProgramData directories?

  Thank you.

  Title asks this.

  Why don't c:\users\attrib h 'All Users' changing the directory to all users so that it displays in the file Explorer?  Same thing with %APPDATA%\microsoft\windows\sendto and ProgramData directories?

  Thank you.

  Hello

  In Windows 7, the AllUsers folder is not a real file.

  It is a symbolic link that redirects to the C:\ProgramData folder.

  ProgramData is not hidden, by default.

  The correct syntax for the Attrib command would be,

  C:\>attrib h ProgramData

  You can view all files by going to the tab options\View Organize\Folder and research.

  In the section files and hidden files , place a check mark in the Show drives, folders and hidden files.

  Click Apply/OK.

  Concerning

• Printer problem - after changing the cartridge, I get a message that the USB cable is not connected

  As above. I checked the USB port and it is connected.

  Original title: printer problem. After changing the cartridge, I get a message that the USB cable is not connected?

  Hello

  1. you receive an error message/code when you try to print?

  2. What is the serial number and model of the printer?
   
  Follow the steps.
   
  Method 1
  Run the hardware and devices Troubleshooter
  This utility checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Also run convenience store Print that would help us diagnose the problem better
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Method 2

  (a) check the physical connection of the printer and make sure that the USB cable is properly plugged.

  (b) connect the printer to a different USB port and check if it helps.

  (c) check the on another computer.

  Method 3

  Run the fix - it tool from the link.

  Diagnose and automatically fix problems printing and printer http://support.Microsoft.com/mats/printing_problems/

  Method 4
  If the previous step fails, follow the steps described in the following link:
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
   
   
  Let us know if it helps.

• How can I change the starting point of a path?

  It bothers me when I use brushes for a path shape/access line. Is there a function to change the starting point of race in the direction of the form/reverse of a path?

  You won't need to duplicate the path. Just select it and then change the options for this object. There is a button in the Panel forms for this.

• Change the stop character doesn't seem to work

  Hello world

  I hope that this will be a quick fix and I'm just on something stupid!

  In short, I'm doing a LabView program to control a pump syringe via RS - 232. I use a Keyspan USB serial adapter to connect my laptop to the device. After a repair on my own, I was able to download a program HyperTerminal and can communicate with my well pump (change of position, speed, during initialization, etc.). However, when I try to do the same thing with LabView, nothing happens.

  First of all, I can say that LabView sends my pump data, because the light on the USB-serial adapter flashes quickly once (its indication that it comes to Rx/Tx). The same thing happens when I communicate with him via the HyperTerminal program. He seems to be in working condition.

  After a lot of reading posts on this forum and developer of the examples, I think that the problem is to send a character of endpoint with my data string. For example, when I have the program HyperTerminal open, I can enter "/ 1ZR ', which will initialize the pump. That move the pump to its original position and prepares for further information. When I go into the properties of "stop character" in this software, it is said: '13,10"(with the quotes). As far as I know, 13 in decimal is a return carriage (or 0xD hex) and 10 is a line break. I don't know if it sends them both. The company says that my program does not work because my LabView program is probably not send the right stop character.

  I tried almost everything I can think of to change the stop character. I know that the VISA VI set up the Serial Port uses the same settings as my COM port shows when I open Control Panel (9600 baud rate, etc.). I had a big bang and thought that maybe I should check MAX and see what his settings are... they are the same. HOWEVER, when I open the "VISA test Panel" on MAX for my COM port, under "Settings/o", the stop character is set to line feed \n. I have change to \r carriage return, but when I click on "apply changes", I get this:

  SET to 0xD stop character
  No error

  And when I close the Panel test and re - open, always back to \n line break. I also tried to change the setting of "tank of termination" in the VISA set a Serial Port to a constant (as a 13) or control (which I tried like 0xD hex as well as 13 decimal).

  I'm fairly convinced it's the issue... If anyone has any idea on how I can force it to use a carriage return? I even tried to disable 'enable the separation tank' and manually compose a string with a \r at the end, but it does not work either...

  I have attached a photo of a simple VI which shows what I want to do (the 2000ms waiting was put there just so that he would not close the COM port before initialization completed... its useless I think).

  Thanks for your help in advance!

  B

  The stop character with the definition configuration function has absolutely nothing for adding a character of termination in writing. Look at the advanced example for how to do it. In addition, if you want to do with the string you enter, you must activate '-' code display. It is a right click option.