change the results of the report with the selection list using dynamic action

Similar Questions

• Refreshing a report on the change in value of the selection list

  -Very well, this should be very easy, but I can't seem to do things.
  
  I have 2 items on a page: a list of selection and a report.
  
  The report contains a WHERE clause that uses the value of the selection list.
  
  So when I change the value of the selection list, the report needs to be recharged.
  
  I don't want to use a 'Redirect and set' when I change the selection list, because I don't think it's very pretty.
  
  So I created a dynamic action that updates the State when the selection list is changed.
  
  Now for the problem: the report get updated, but the new value of the selection list is not used!
  
  How can I make select the value of the item to be stored in session state?
  
  I can't find this option anywhere in the parameters of the dynamic action.
  
  Thank you.

  popovitsj wrote:

  How can I make select the value of the item to be stored in session state?

  I can't find this option anywhere in the parameters of the dynamic action.

  It is in the region of report definition: Page to submit items in the Source section.

• Select the color based on the value of the selected list

  Hello
  
  Is could someone please tell me if it is possible to display a LOV with a background color according to the selected value?
  
  In fact, I have a report with many selection lists whose value can be N/A Y, N, and I would like that the corresponding LOVs have the background in color according to the value.
  
  Thanks in advance,
  
  Andreea
  
  Published by: user12064977 on October 20, 2009 02:15

  Oh! I have not read the word "report" in your original post and I took your page as a form... :(

  OK, first of all, run your page and see the HTML source generated for it. Note the value of the attribute "name" for all the columns in the report when you use selection lists. Now using JS, set the background color for them.

  Suppose "f03" is the name for your selection list value, then

  Try the code in the following page footer section

  
  
  CheersHari 
  

• Display the value in the selection list

  Hi all
  Any body know how to get the text to display selection list in another text field? Suite of java script displays the value no text, I need another way around. I don't want to change the selection list that the user needs to see the text value.
  
  in the HTML section.
  

  < script language = "JavaScript" type = "text/javascript" >

  int f_getText (pThis, pThat) {}
  var enter_val = pThis;
  var return_val = pThat;
  {
  gReturn = document.getElementById ("enter_val") .value;
  {html_GetElement (return_val) .value = gReturn.toUpperCase ()}
  }
  }
  < /script >
  >
  
  in the HTML form element attributes.
  

  onBlur = "javascript:f_getText('P40_LOC_ID','P40_LOCATION')";

  "" Thank you
  
  Pascal M

  Change your JS function

  function f_getText (pThis, pThat){
  
  var  sel=$x(pThis);
  $x(pThat).value= sel.options[sel.selectedIndex].text
  
  }
  

  CITY

  Published by: city has 8 November 2008 17:24

• You can change the font size using the form in the preview (not with the text box). Having also arrow drawing trouble in preview.

  You can change the font size using the form in the preview (not with the text box). Having also arrow drawing trouble in preview.

  What problems are you having with the arrow? You go to Tools-> annotate-> arrow and an arrow appears. Then you can drag around the head and tail to make it to the desired location.

  

• Hello I am a student and I have a problem with the tool Selection (V). When I opened the file AI CC with CS6 selection tool doesn't allow me to change the selection. What can I do? (I have reinstall AI CC and the problem persists)

  Hello I am a student and I have a problem with the tool Selection (V). When I opened the file AI CC with CS6 selection tool doesn't allow me to change the selection. What can I do? (I have reinstall AI CC and the problem persists)

  Ivan,

  If it's on the rectangular objects, you may have encountered the bug Rectangle Live which is limited to the MAC versions from 10.7 and 10.8, but not of 10.9 (Mavericks) or 10.10 (Yosemite). If all goes well, the bug will be fixed soon.

  Thus, a switch for the Mavericks or Yosemite with a reinstall might be the way to solve it here and now.

  To get around it, in each case, it is possible to develop direct Rectangles to get the normal old shaped rectangles or Pathfinder > unit, or use the scale tool or the free transform tool.

  A more permanent way round that is to create normal old shaped rectangles, after running the free script created by Pawel, see this thread with download link:

  https://forums.Adobe.com/thread/1587587

• refresh the html region when the selection list or selected ir line chang

  Apex 4.2

  Hello

  I made a simple page for test actions.

  I have

  -an interactive report and a selection in my first area list.

  -a field of text (P5000_indid) to keep the selected indid

  -region of html where the source is:

  DECLARE

  CURSOR c_ind IS

  SELECT indid, ind, industry

  IND

  WHEN indid as: P5000_INDID;

  BEGIN

  FOR a c_ind IN LOOP

  HTP.p ("< style b =" white-space: nowrap;) "> Indid: ' |" a.indid |' ---> ' || a.Industry: '< /b > < br / >');

  END LOOP;

  END;

  I'm sorry, but I m a bit confused with all the things I read before and do not know what is possible or not and what is the best practice to:

  1. select in the selectList (is it also possible to retrieve the selected (highlighted) or line in the IR)

  2 update the P5000_INDID

  3. refresh the html box according to the value of P5000_INDID (I was able to refresh an IR according to value, but there was the possibility to say what variable to present, but I have no

  see for the region of html)

  I m doing this test, because in the end, I would like to be able to regresh a small chart according to the selected line of the IR.  Do you think that it is possible to s?

  Sorry for my newbie question

  Thanks for your help

  L.

  OK, I finally found everything that I needed,

  You can test it on:

  http://Apex.Oracle.com/pls/Apex/f?p=53793

  Demo/demo

  the content of the output area now is the result of an application process, according to a parameter.

  It is called with javascript onChange and response replace the contents of the region

  and you can also see that I can now select a line and show it by changing the color of the line, and then update the output.

  and when a line is selected, it resets the selection on the selectList to avoid triggering the event on the selection list.

• The selection list value does not change when the page is sent

  Hi all
  
  I have a selection list that acts as an entry for the report. the page is submitted using a button.
  The button uses the branch option "redirecting to page in the application. I select the same page.
  
  The problem is when I change other values in the value list always takes the first value
  
  I want to know if the problem is with the key or select list. What should I do about it?
  
  Concerning
  REDA

  Renon wrote:

  I tried your suggestion. Now that I ask, is the report is expected to show only when the button request is passed. I read to present the action of page the name of the button acts as a request.
  so now my report status is request = Expression1 and value of expression1 takes GO tell button name.

  The report does not appear but. I checked the session. It has the value of the selection list and the page is submitted as but the report is not displayed.

  ASK is disabled before the exposure treatment page unless it is set in a branch or a URL, this is why it has no value when they are referenced in your State in the region.

  Set the attribute request in your branch for & request to make available at the course to see the page the current value of the demand for treatment.

• Refresh the report based on the select list item

  Hello world
  
  Someone has the answer to refresh a report based on an element that I select in a select list? I currently have the item in the list of selection and a report under him I wrote a sql that fills with data. If I choose an article in my select list, I want to change the data in my report. What I have to write separate sqls for each item to be fired or write some type of process. Can someone help me?
  
  Thank you
  Ryan

  Write directly in the SQL report. Your select list item will be the variable in the SQL.

• Possible to change the variable cpQuizInfoPassFail through advanced actions?

  Is it possible to change the variable cpQuizInfoPassFail through advanced actions? I do not see this or the other quizzing variable when I try to create an advanced action and change by entitlement or expression. Let me explain what I want to accomplish, I ask the wrong question. I have a training project, with that I need to include a post test. I don't really like the captivate quizzes. I want the post-test to play as a ride on jeopady where the user chooses issues category and gets points if the user answers correctly. For this I must ask questions on a game board and (from what I can fig) you cannot have multiple questions on the same page. I'm building the quiz with my own custom variables and coded so that the program jumps to a page of the certificate if the user gets more than 84 points. THA all works very well. But I have to be able to tell the database that the program will connect with the user has passed the quiz. I thought I could do this if I assign the value 1 to the variable cpQuizInfoPassFail. Is there a way to do this? Thanks in advance for any help,

  Doug Jackson

  Hi Doug,.

  I don't see the version you are using. Each interactive object can be marked, has a report following properties in the control panel (if you use CP5 or CP5.5) or a tab in the Properties dialog box reports, if you use a different version. You must add a score (default value is normally 1 point) and make sure you add it to the total score.

  If you want to make me a glance, post your file on acrobat.com (free, use your Adobe ID), share and publish. You will have a link that you can copy into a private message to me.

  Lilybiri

• Address book - blackBerry Smartphones change the field "synchronize using.

  Hello world

  I recently changed my primary Gmail account on my blackberry (from [email protected] to [email protected]).

  I have a problem with sync'ing with my address book.

  All of my old contacts are synchronized via [email protected]

  And now, I would have them Sync with [email protected]

  In every Contact form, I discovered there is a synchronization field to aid which is filled with the google account. Unfortunately, you cannot change this field.

  Y at - it an easy and fast way to mass - change (the field sync using) all my old contacts sync with my new gmail account?

  I tried with importers and exporters of gmail to gmail, but I lose my contacts photos. I cannot accept this solution because I have more than 500 contacts and 90% of them have an image.

  So I'm asking if someone has an idea to solve this problem.

  Thanks in advance

  Thanks for your reply.

  But I decided I'm going to do it by hand and transfer between gmail via vcf file transfer account.

  It's a real pain in the * because I know that have to redo all the links between linkedin/facebook and my address book. And also photos of contacts. It would have been very happy to be able to mass change the field "to sync using"

  There is therefore no real solution to solve my problem except to waste a lot of time by hand.

  But I'll post another topic for a question than a problem with the synchronization of contacts and photos

• Script to change the selected layer to one of the drop-down list in the layers palette colors

  Hello!

  I was wondering if anyone knows of a script that would allow me to change the selected layers (single or multiple selection) in 'Light Blue' or all the colors in the menu drop-down? (see attached screenshot)

  I found the following but it changes all layers and is the RGB color.

  -----

  say application "Adobe Illustrator"

  set current_Layer in current document

  view the dialog box "in the current document there is" & layersCounter & "layers." & "Recolor label layers?"

  Repeat until (layersCounter = 0)

  set color of layer layersCounter in the current document to {Light Blue}

  set layersCounter to layersCounter - 1

  end Repeat

  end say

  -----
  

  

  I don't know how the script so any help is greatly appreciated. Thank you in advance!

  John

  as far as I can tell this is only possible with a few other modifications... Since 'selected' is not a property of "layers" javascript cannot determine if you see a highlighted layer in the layers panel.

  you could do one of 2 ways. Depending on how many layers you want to change the color, you can either make those visible or hidden (for example, if you want to change to 80% of the layers of a specific color, hide others 20%). and then simply add a clause inside the loop if for.

  var doc = app.activeDocument;

  var layers = doc.layers;

  Blue of var = new RGBColor();

  Blue.Red = 79;

  Blue.Green = 128;

  Blue.Blue = 255;

  for (i = 0; i<>

  If (layers [i] .visible == true) {}

  var = aLay layers [i];

  aLay.color = blue;

  }

  }

• When you perform queries Smart View Ad hoc, changing the selection of the Alias in the Essbase himself Ribbon

  Hyperion Planning

  GPE, Fusion edition, 11.1.2.2

  Smart View 11.1.2.2

  When running Smart View Ad-hoc queries, selection of the Alias in the Essbase Ribbon does not.

  When I start a new query, the Alias in the Ribbon of Smart View is always set to None; but often, not always, the selection will change itself no default - usually after I refreshred/zoom a few times.  He starts a time past, I change the selection of the Alias in the Ribbon in none, but it changes just itself by default again.

  The option to display the name of the Member is defined on behalf of members only.  (This is the default setting for this option and I usually begin with all the options, by default).

  This problem started after that we went to 11.1.2.2.

  If neither know why the Alias / None change automatically in the Essbase Ribbon?

  Thank you

  Veronica

  There is a way that you can set for your connection

  When you use shared connections to connect to your application, you do a right click and say "Add to private connections". Once you have added to your private connection, right click and click 'Set Alias Table'. You can do this on a connection that you have added to private connections

  Concerning

  Amarnath

• helps with the update of tabular form using dynamic Action

  Hello world

  I'm trying to simplify a tabular presentation based on a collection so that it uses more dynamic actions that will be ultimately more easy for us to debug.

  Our tabular presentation is based on the query:

  SELECT
  apex_item.text(1,seq_id,'','','id="f01_'||seq_id,'','') "DeleteRow",
  seq_id,
  seq_id display_seq_id,
  c003,
  c004,
  c005,
  c006,
  apex_item.text_from_LOV(c004,'SPECIES')||'-'||apex_item.text_from_LOV(c005,'GRADE')||'-'||apex_item.text_from_LOV(c006,'MARKETCODE')||'-'||apex_item.text_from_LOV_query(c007,'select unit_of_measure d, unit_of_measure r from species_qc') unit,
  apex_item.select_list_from_LOV(8,c008,'DISPOSITIONS','onchange="getAllDisposition('||seq_id||')"','YES','0','  -- Select Favorite --  ','f08_'||seq_id,'') Disposition,
  apex_item.select_list_from_LOV(9,c009,'GEARS','style="background-color:#FBEC5D; "onFocus="checkGearPreviousFocus('||seq_id||');"onchange="getAllGears('||seq_id||')"','YES','3333','-- Select Favorite --','f09_'||seq_id,'') Gear,
  apex_item.text(10,TO_NUMBER(c010),5,null, 'onchange="setTotal('||seq_id||')"','f10_'||seq_id,'') Quantity,
   
  apex_item.text(11,TO_NUMBER(c011),5,null,'onchange="getPriceBoundaries('||seq_id||')"','f11_'||seq_id,'') Price,
  
  apex_item.text(12, TO_NUMBER(c012),5,null, 'onchange="changePrice
  ('||seq_id||')" onKeyDown="selectDollarsFocus('||seq_id||',event);"','f12_'||seq_id,'') Dollars,
   decode(c013,'Y',apex_item.text(14, c014,30,null,'style="background-color:#FBEC5D;" onClick="onFocusAreaFished('||seq_id||');"','f14_'||seq_id,''),'N','N/A') Area_Fished,
  c014,
  c015,
  c016,
  c017 additional_measure_flag,
  decode(c017,'Y',apex_item.text(18, c018,4,null,'style="background-color:#FBEC5D; "onBlur="setUnitQuantity('||seq_id||')"','f18_'||seq_id,''),'N','N/A') UNIT_QUANTITY,
  decode(c017,'Y',apex_item.text(19,'CN',3,null,'readOnly=readOnly;','f19_'||seq_id,''),'N','N/A') UNIT_COUNT,
  c024 fins_attached,
  apex_item.textarea(28,c028,3,null,'class="hms_info"','f28_'||seq_id,'') Explanation,
  decode(c024,'N',apex_item.select_list_from_LOV(29,c029,'HMSNATURE','class="hms_info"''onchange="saveNature('||seq_id||')"','YES','A','-- Select Nature of Sale --','f29_'||seq_id,''),'U',apex_item.select_list_from_LOV(29,c029,'HMSNATURE','onchange="saveNature('||seq_id||')"','YES','A','-- Select Nature of Sale --','f29_'||seq_id,''),'Y','N/A') Nature_Of_Sale,
  c030,
  c031,
  c032,
  c033,
  c034,
  c035,
  c036,
  c037,
  c038,
  c039,
  apex_item.select_list_from_LOV(40,c040,'HMS_AREA_CODE','style="background-color:#FBEC5D;" class="hms_info"
  ',null,null,null,'f40_'||seq_id,'')  HMS_AREA_CODE,
  c020 hms_flag,
  apex_item.text(41,TO_NUMBER(c041),5,null, 'class="hms_info"','f41_'||seq_id,'') Sale_Price,
  c042,
  c043,
  c044,
  c050 shark_flag
  from apex_collections
   where collection_name = 'SPECIES_COLLECTION' order by seq_id 
  

  Note that many of the fields referenced are c0xx... and really serve as place holders so that the c0xx = fxx.  It's awkward, like every time that a movement or move a column, it upsets the fxx value.   So, I tried to use the CLASS if possible.

  I have a dynamic action that had worked perfectly, until I moved one of the columns... and now, it seems not to work when I'm trying to update anything with the HMS_INFO or SHARK_INFO class.  Grrr.

  dynamic action: CHANGE COLUMN

  event: CHANGE

  selection type: JQUERY SELECTOR

  jQuery selector: input [name = 'f10'], input [name = 'f11'], input [name = 'f12'], input [name = "f24"], textarea [name = "f28"], select [name = "f40"], input [name = "f41"]

  true action1: defined value, expression javascript, set P110_ID = this.triggeringElement.id

  true action2: defined value, expression javascript, set P110_VALUE = this.triggeringElement.value

  true action3: run pl/sql,.

  declare
    v_attr number;
    v_seq number;
  begin 
    v_attr := TO_NUMBER (SUBSTR (:p110_id, 2, 2));
    select ltrim(substr(:p110_ID,5,4),'0') into v_seq from dual;
   
    safis_collections.update_column(v_seq,
                                    v_attr,
                                    :p110_value);
  end;
  

  the safis_collections.update_column package is:

  procedure update_column(v_seq in varchar2,
                          v_attr in number,
                          v_value in varchar2)
  is
  begin
     apex_collection.update_member_attribute (p_collection_name=> 'SPECIES_COLLECTION',
                       p_seq => v_seq,
                       p_attr_number => v_attr,
                       p_attr_value  => v_value);
  apex_debug.message('updated column. seq='||v_seq||' attribute='||v_attr||' with '||v_value);
  
  end;
  

  I wonder if there is a way to make the CLASS in my JQUERY SELECTOR, so something like reference entry [class = "HMS_INFO"], input [CLASS = "shark_info"]... and if so, what happens if a single item in the class is an option button and the other is a selection list and the other an element?

  is it possible to not have to rely on the fxx.  Currently, my collection columns map to the investment in the form of tables... sense, c024 = f24... because I placed c024 to be the 24th editable column, but this seems crazy.  Is there a simpler way?  I'm just learning class, then maybe there is something extra, or rather that I could use...

  any help is appreciated.   Thank you!

  I think I have solved the problem.

  dynamic action: CHANGE COLUMN

  event: CHANGE

  selection type: JQUERY SELECTOR

  jQuery selector: input [name = 'f10'], input [name = 'f11'], input [name = 'f12'], .shark_info, .hms_info

  true action1: defined value, expression javascript, set P110_ID = this.triggeringElement.id P110_VALUE POINT KEYS

  true action2: run pl/sql code

  begin
  null;
  end;
  

  items to submit page: P110_ID

  true action3: defined value, expression javascript, set P110_VALUE = this.triggeringElement.value P110_VALUE POINT KEYS

  true Action4: value: PL/SQL expression, the value P110_SEQ = rtrim (substr(:P110_ID,5,4),'0 ') CONCERNED POINT: P110_SEQ

  true Action5: run pl/sql code

  declare
  
    v_attr number;
  
  begin
    v_attr := TO_NUMBER (SUBSTR (:P110_id, 2, 2));
  
    apex_collection.update_member_attribute
                     (p_collection_name      => 'SPECIES_COLLECTION',
                      p_seq                  => :P110_SEQ,
                      p_attr_number          => v_attr,
                      p_attr_value           => :P110_VALUE);
  
  end;
  

  items to submit page: P110_ID, P110_VALUE, P110_SEQ

  true action6: refreshment area

  I think it is the combination of the use of pl/sql expression to calculate P110_SEQ and also your tip on TRUE ACTION2 to submit the item that did the trick.

  Thanks Kofi, for your patience and help!  It was great.

  Ugh... on the next issue.

  Karen

• Weird problem with the width of the selection list

  4.1.1
  
  Hello
  
  I got a selection list filter that has three values null, Y and n. based on what the user selects a tabular presentation is filled with data that also has a list of selection.
  
  Now, earlier, I had only two values Y and N in the selection filter, and according to the selected option list, select tabular list would be filled as well as other areas. Select the 'tabular forms' list for all lines are the same width. When I added the Null value option in, select the filter, now the tabular form displays all of the values, however, the selection list is of different sizes according to the length of the text.
  
  I put in the CSS Style of the selection list - width: 20px
  
  I also tried the option element width, but still no luck, when I select Y or N to the upper filter select, selection lists appear correctly with the same width.
  
  No idea what could happen?
  
  Just to confirm, the problem is with the width of selection tabular list.
  
  Thank you
  Ryan

  ryansun wrote:
  4.1.1

  Hello

  I got a selection list filter that has three values null, Y and n. based on what the user selects a tabular presentation is filled with data that also has a list of selection.

  Now, earlier, I had only two values Y and N in the selection filter, and according to the selected option list, select tabular list would be filled as well as other areas. Select the 'tabular forms' list for all lines are the same width. When I added the Null value option in, select the filter, now the tabular form displays all of the values, however, the selection list is of different sizes according to the length of the text.

  This seems odd. Can you reproduce this on apex.oracle.com? What browser do you use?

  I put in the CSS Style of the selection list - width: 20px

  I also tried the option element width, but still no luck, when I select Y or N to the upper filter select, selection lists appear correctly with the same width.

  No idea what could happen?

  All functionality of another column using the column Standard report basically, means the "CSS" Style property is not applied (see, for example: {: identifier of the thread = 1001577}), then the attributes of the element, link attributes etc. should be used.

  Tabular controls, to use the standard approach of HTML attributes. Come in

  style="display: block; width: 200px;"
  

  in the property of the attributes of the element.