change the serial key

Similar Questions

• How to change the serial number when the system board is replaced

  How can I change the serial number of the system in the bios of a D530 SSF when replacing the motherboard?

  Hello:

  I suppose that if that's all you can do with this utility, then it of all you can do.

  I do not think I said that the utility likely to modify or add the model number, nor asked the question originally.

  You will need to contact HP technical support and have a technician HP bios with any other information you need to tattoo.

  Paul

• Portege Z10T-A140: can I make to Win 8.1 and where to find the serial key

  Hello
  I have Z10T-A140.

  When I check the part number in the link: http://www.toshibamea.com/en/Compatibility-Matrix-8-1?SerialNo=pt131v-00h005ar

  told me is not compatible with win 8.1.

  but to under writing the page, it is compatible with win 8.1.

  Why the result is different?

  Another question:
  I can't have my serial number of Windows 8 and I can only see last 5 digit number.
  If my clear HARD drive and I need full new install winodws 8, where can I find my serial number for Windows 8.1?

  Thank you.

  > Why the result is different?

  Your laptop is a PT131V-00H005AR Portege Z10T-A140
  Of course, it s 8.1 Windows extensible and taken in charge.
  On the page of supported Windows update 8.1 models, you can find the Portege Z10T PT131V.

  > Other my question:
  > I can't get my serial number of Windows 8 and I can only see last 5 digit number.
  > If my clear HARD drive and I need full new install windows 8, where can I find my serial number for Windows 8.1?

  I recommend reading the user manual. You will find information on the Toshiba Recovery Media Creator.
  The recovery media Creator allows you to create a recovery disk. This disc install again the image of Toshiba on the laptop. The serial key is not necessary because the Windows 8 will be activated automatically using Toshiba image.

• HP folio 13-2000: changing the serial number on a HP Folio 13-2000 after changing of Council of administration of the system

  Hello

  I replaced the motherboard on an HP Folio 13-2000 and im having trouble changing the serial number to match the previous motherboard

  I tried the back HPSET152.exe tool and the tool wndmifit in windows that said "this motherboard is not supported.

  Does anyone have any suggestions?

  Thank you

  Matt Davey

  HP CDS engineer

  Hello

  These tools are available only for authorized service partners and must not be shared.

  If you are an employee of HP, please HP service team for more details.

• Change the product key to use COA OEM during the product upgrade

  I found the kkid106 question "can I use a product key Windows 7 OEM to a retail facility.

  But as it is not my particular case, I want to be sure and make the issue.

  The question is on a clean install of Windows 7 Home Retail using Windows 7 OEM Home.  My case is not a clean install.

  I have the following two scenarios:

  Scenario 1. A computer with Windows XP Pro OEM who got the original damage.  I have an Image backup which I bring to a Destination with Windows 8 OEM computer.  I get a retail upgrade of Windows 8.  I restore the Image to the destination computer, and then upgrade old XP Pro OEM with retail upgrade to Windows 8.  Technically I find myself with a computer without a license since the upgrade come from an OEM from another computer.  Now, I change the product key by using the Destination COA OEM computer to make a licensed computer.

  This scenario is correct.  Can I validate the license online or by phone?

  Scenario 2. A computer with Windows XP Pro OEM who got the original damage.  I have an Image backup which I bring to a Destination with Windows 8 OEM computer.  I have an Upgrade download Windows 8 without product key.  I restore the Image to the destination computer, and then upgrade old XP Pro OEM upgrade download to Windows 8.  I find myself with a computer without a license, because the upgrade is unlicensed and comes from an OEM from another computer.  Now, I change the product key by using the Destination COA OEM computer to make a licensed computer.

  This scenario is correct.  Can I validate the license online or by phone?

  Hi Jose,

  I would like to send you the items provided, they talk about how use OEM keys with the retail copy.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/can-i-use-Windows-7-OEM-key-with-a-non-OEM-disc/7788dfa2-94a7-4DB3-8bcd-b0e109bd7b95

  http://social.technet.Microsoft.com/forums/Windows/en-us/c805da6b-cbd2-4a40-9ea7-cc17391cf4bf/can-i-use-OEM-Windows-7-HP-product-key-to-install-64bit-OS-off-of-retail-disc?Forum=w7itproinstall

  Thank you

  Waseemulla S

• I need to change the product key

  We work with images here and we have a lot of machines that are identical.  We have activated Windows on the original image and did all the updates before creating the image.  Now, when we use this same image, it is still saved and activated with the initial machine where the image has been created, but the key to use is different because it is another computer with a new Microsoft Windows XP sticker (certificate).  I used the "KeyUpdateTool_enu" downloaded directly from Microsoft and after you enter the new key, it says that it cannot update the key.

  I tried the msoobe /a registry proposed on the site of Micrsoft hack and it says that Windows is already registered.

  So what I want to do is to just change the product with a new key.  The key corresponds to the version of Windows, so this isn't the problem.

  Thanks in advance.

  Its slow but it works as long as you don't have too many computers:

  Windows product key update tool:
  http://www.Microsoft.com/genuine/selfhelp/XPPkuinst.aspx?displaylang=en&sGuid=4d61dc27-1f91-4B1E-b73a-ab5ccc9a32a3

  Change the product key on Windows XP
  http://blogs.TechRepublic.com.com/window-on-Windows/?p=672&tag=nl.e064

  How to change the product key of Volume License on a computer that is running Windows XP Service Pack 1 and later versions of Windows XP
  http://support.Microsoft.com/kb/328874

  J W Stuart: http://www.pagestart.com

• change the product key for win xp 64-bit

  Im sorry, new to this forum but who want a win xp 64 - bit product key change. I installed os with the key to the business, but I want it back to oem sticker on the box of the computer.

  How can I do?

  Thank you

  Change the product key on Windows XP:
  http://articles.TechRepublic.com.com/5100-10878_11-5034890.html

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Change the product key

  Hello
  The situation is like this: I have 10 Acer laptops with linux installed on them and 10 Windows XP home sp3.
  I have instaled on laptop and after that I created an image of the hard drive and installed on a computer to second and third.
  The problem is that all 3 computers have the same product keys. I want to change the product key.
  Before I created the image I activated the license and I tried to change, with a few small programs, the product, but keys with no luck. Is there a way to do this without having to reinstall the operating system?
  Thanks in advance.

  Given that you have a valid Windows XP key license and product for each computer, try this:

  1. run the registry editor and change at least one digit of the value of this key:

  HLM/Software/Microsoft/Windows NT / CurrentVersion / WPAEvents / OOBETimer

  2. click on start > run and enter this command:

  %systemroot%\System32\oobe\msoobe.exe /a

  3. Select Yes, I want a phone rep > next > change product key.

  4 type the new product key, and then click Update.

  5. turn on.

  WARNING: Incorrectly editing the registry can damage your system and prevent Windows to start. Before you do, back up your important data, make a restore point and make sure that you know how to repair a damaged system.

• How to change the product key for Office 2007?

  Original title: product key used.

  When I loaded Office 2007 I used a product key with any additional use.  I try to enter a different product key, but impossible to find how to do this.  Can you please direct me to the correct site to do this?  Thank you!

  Hello

  It would be easier to uninstall it and then reinstall it by using the different product key.

  How to change the product key for Office XP, Office 2003 and for Office system 2007" http://support.Microsoft.com/kb/895456 http://www.mydigitallife.info/how-to-reset-or-change-Microsoft-Office-2007-product-license-key-or-volume-license-key-VLK/ See you soon.

• How can I change the product key Windows 7 starter edition

  Hi all

  I tried to change the product key on my netbook, because I had to replace the hard drive and I used my recovery disks of the brothers that he has the same exact model. However when I had done restoring the product key is also the same so I wanted to put the original back on.

  I used slui methods both properties before, but neither give me a way to change the product key at the moment. When I go to properties it says only: windows is activated without any options to change of key and when I run slui a window appears which says activation succeeded.

  Am I missing something? or is it because its Windows 7 starter?

  Any help would be appreciated and thanks in advance

  Click Start, type: CMD

  Right-click on CMD

  Click on run as administrator

  At the command prompt, type the following commands:

  slmgr.vbs - ipk xxxx-xxxx-xxxx-xxxx (to replace the specified in the current product key)

  xxxx-xxxx-xxxx-xxxx - represents your product key

  Press enter on your keyboard

  Leave the command prompt

  Restart your computer

• Change the product key for Windows 7 Code

  I bought a package of Windows 7 from a supplier without realizing it was a distribution of subscription "not for sale". It is now installed on my computer after a painful migration from a dying hard drive which had Windows Vista installed. The old drive is now corrupt and not repairable.

  When I tried to record the installation, I found that he was blocked. I have to make sure that it is for the reason above somehow. How to check this?

  It seems I have to buy another Package of Windows 7 but I don't want to do a fresh install since I went to great effort to set up the installation on a new SSD and have all of my applications transferred intact.

  Is it possible to just change the product key of the new package to apply to my existing install without having to reinstall everything?

  Just for the completion of this thread, I decided to pass my final action to get my computer system operating system up-to-date.

  Assuming it was a MSDN product licensed, it was repackaged in a retail store packaging and sold as such.

  Needing my computer back to the status of full support, I bought a 64-bit edition (non - OEM) of Windows 10 full retail on USB media. Is it installed just fine on top of the MSDN license of Windows 7 and allowed me to install without erasing the contents of the disc. My applications and drivers are intact. Windows 10 also all updates installed correctly.

  This allowed me to remedy the situation without having to re - install everything that would have been very time consuming.

  Thank you for your help.

• change the product key on windows 7 ultimate 64-bit full

  Let's make has a history very very short.  Earlier this year, I bought 4 copies of Windows 7 Ultimate full 64-bit for internet and loaded mrechant on 4 machines (3 upgrades from Vista and 1 new installation) without a hitch.  The software was perfect for a few months until recently Microsoft me notified that the software was not "authentic".  Apparently this software was not allowed to sell in the USA.

  In any case, if I buy a new genuine Windows 7 Ultimate Full 64-bit version, can't I just change the product key to solve this problem?  I know I need to ultimately get 4 copies.

  Thanks in advance!

  -Doug

  Click Start, right click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click change product key

  Enter the new product key.

  How to update your product key

  http://www.Microsoft.com/genuine/selfhelp/Win7Pkuinst.aspx?displaylang=en&sGuid=03838351-5d79-4ffc-90c7-973062d2676f

• What is the serial key and activation key for Microsoft professional win7 64 bit?

  Original title: WHAT IS THE SERIAL KEY AND ACTIVATION KEY TO PROFFESNIOL MS WIN7 64 BIT.

  ME TELL WHAT IS THE SERIAL KEY AND ACTIVATION KEY TO PROFFESNIOL MS WIN7 64 BIT

  REAL NAME = X 17 - 59186.iso

  ME TELL WHAT IS THE SERIAL KEY AND ACTIVATION KEY TO PROFFESNIOL MS WIN7 64 BIT

  REAL NAME = X 17 - 59186.iso

  You will need to buy a license to activate this copy of Windows 7 Professional. It doesn't have a product key, you will need to have that already.

  You can even buy an edition much cheaper if you like Home Premium, since it will be for domestic use.

  Because Windows 7 is in limited stock because Microsoft ended sales in October 2013, this created demand due to its rarity. This means the retail boxed copies request a bonus, while the OEM System Builder copies remain affordable.

  Full version (retail):

  -Includes the rights of transfer to another computer.

  -Does not require a qualifying earlier version of Windows.

  -Expensive

  Upgrade version (detail):

  -Includes the rights of transfer to another computer.

  -require a qualifying earlier version of Windows.

  -Expensive, but less expensive full version

  OEM System Builder version:

  The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:

  -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

  -OEM Licenses are tied to the computer first you install and activate it on

  -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

  -OEM versions does not move directly from an older Windows operating system

  There is nothing wrong to use it too, especially that all future versions of Windows will be full versions.

  Where can I still get Windows 7?

  Full version-

  Microsoft Windows 7 Home Premium

  Full version-

  Microsoft Windows 7 Ultimate

  Full version-

  Microsoft Windows 7 Professional

  Version upgrade-

  Microsoft Windows 7 Professional upgrade

  Version upgrade-

  Microsoft Windows 7 Ultimate Upgrade

  Version upgrade-

  Microsoft Windows 7 Home Premium Upgrade

  Family Pack:

  Microsoft Windows 7 Home Premium Upgrade Family Pack (3 users)

• Change the ISAKMP keys

  I have a Pix 506 running v6.1 (2) that I need to change the ISAKMP key on. When I entered the new type-error telling me that there is already a key, but I can't find how to clear the existing key. Any suggestion is appreciated. -Pete

  Upload your Pix on a tftp server config. The stored configuration file illustrates the keys in clear text.

  -Andreas

• Change the line key notify labels via sip

  Hi, I was wondering if anyone knew if the following text was possible. Is it possible to change any part of the config of the series phone Cisco SPA via a SIP notify or similar method. I have an asterisk server, where we have created a system to move a device for extensions without requiring a reconfiguration/reset (in the most anticipated cases for the function, the new phones or complete swaps may or may not require commissioning). The problem with this so that when you move Extension A of device 1 device 2, clearly labels don't update unless you change the configuration via the web gui or commissioning.

  I was looking for a way to change the line key labels without having to reboot via a SIP notify message similar to how you can tell a SPA phone to resync notify its config via sip.

  Research on google seems not to show many results, so I tend to think that's not likely to be possible. So I asked here as one of the last resorts before the redesign on the part of the idea.

  The web GUI is not an option for me due to some phones may be behind various firewalls, proxy or the webgui unaccessable.

  Thanks in advance

  Avoid you SIP inform as well as changing the configuration. But the buttons on the phone are mislabeled.

  I call it serious bug, you have no system for deployment.

  But it seems that you accept such behavior as characteristic of the system that you designed.

  It's your system - your opinion is decisive.